Recent update to "git daemon" tries to enable the socket-level
KEEPALIVE, but when it is spawned via inetd, the standard input
file descriptor may not necessarily be connected to a socket.
Suppress an ENOTSOCK error from setsockopt().
* ew/daemon-socket-keepalive:
Windows: add missing definition of ENOTSOCK
daemon: ignore ENOTSOCK from setsockopt
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
"git worktree prune" protected worktrees that are marked as
"locked" by creating a file in a known location. "git worktree"
command learned a dedicated command pair to create and remove such
a file, so that the users do not have to do this with editor.
"git notes merge" had a code to see if a path exists (and fails if
it does) and then open the path for writing (when it doesn't).
Replace it with open with O_EXCL.
* rs/notes-merge-no-toctou:
notes-merge: use O_EXCL to avoid overwriting existing files
A few tests that specifically target "git rebase -i" have been
added.
* js/rebase-i-tests:
rebase -i: we allow extra spaces after fixup!/squash!
rebase -i: demonstrate a bug with --autosquash
t3404: add a test for the --gpg-sign option
Existing autoconf generated test for the need to link with pthread
library did not check all the functions from pthread libraries;
recent FreeBSD has some functions in libc but not others, and we
mistakenly thought linking with libc is enough when it is not.
* ew/autoconf-pthread:
configure.ac: stronger test for pthread linkage
"git blame file" allowed the lineage of lines in the uncommitted,
unadded contents of "file" to be inspected, but it refused when
"file" did not appear in the current commit. When "file" was
created by renaming an existing file (but the change has not been
committed), this restriction was unnecessarily tight.
* mh/blame-worktree:
t/t8003-blame-corner-cases.sh: Use here documents
blame: allow to blame paths freshly added to the index
When "git fsck" reports a broken link (e.g. a tree object contains
a blob that does not exist), both containing object and the object
that is referred to were reported with their 40-hex object names.
The command learned the "--name-objects" option to show the path to
the containing object from existing refs (e.g. "HEAD~24^2:file.txt").
* js/fsck-name-object:
fsck: optionally show more helpful info for broken links
fsck: give the error function a chance to see the fsck_options
fsck_walk(): optionally name objects on the go
fsck: refactor how to describe objects
"git add -N dir/file && git write-tree" produced an incorrect tree
when there are other paths in the same directory that sorts after
"file".
* nd/cache-tree-ita:
cache-tree: do not generate empty trees as a result of all i-t-a subentries
cache-tree.c: fix i-t-a entry skipping directory updates sometimes
test-lib.sh: introduce and use $EMPTY_BLOB
test-lib.sh: introduce and use $EMPTY_TREE
* nd/test-helpers:
t/test-lib.sh: fix running tests with --valgrind
Makefile: use VCSSVN_LIB to refer to svn library
Makefile: drop extra dependencies for test helpers
Makefile assumed that -lrt is always available on platforms that
want to use clock_gettime() and CLOCK_MONOTONIC, which is not a
case for recent Mac OS X. The necessary symbols are often found in
libc on many modern systems and having -lrt on the command line, as
long as the library exists, had no effect, but when the platform
removes librt.a that is a different matter--having -lrt will break
the linkage.
This change could be seen as a regression for those who do need to
specify -lrt, as they now specifically ask for NEEDS_LIBRT when
building. Hopefully they are in the minority these days.
* rw/make-needs-librt:
config.mak.uname: define NEEDS_LIBRT under Linux, for now
Makefile: add NEEDS_LIBRT to optionally link with librt
The API to iterate over all the refs (i.e. for_each_ref(), etc.)
has been revamped.
* mh/ref-iterators:
for_each_reflog(): reimplement using iterators
dir_iterator: new API for iterating over a directory tree
for_each_reflog(): don't abort for bad references
do_for_each_ref(): reimplement using reference iteration
refs: introduce an iterator interface
ref_resolves_to_object(): new function
entry_resolves_to_object(): rename function from ref_resolves_to_object()
get_ref_cache(): only create an instance if there is a submodule
remote rm: handle symbolic refs correctly
delete_refs(): add a flags argument
refs: use name "prefix" consistently
do_for_each_ref(): move docstring to the header file
refs: remove unnecessary "extern" keywords
Error handling in the codepaths that updates refs has been
improved.
* mh/update-ref-errors:
lock_ref_for_update(): avoid a symref resolution
lock_ref_for_update(): make error handling more uniform
t1404: add more tests of update-ref error handling
t1404: document function test_update_rejected
t1404: remove "prefix" argument to test_update_rejected
t1404: rename file to t1404-update-ref-errors.sh
The previous commit introduced the first use of ENOTSOCK. This macro is
not available on Windows. Define it as WSAENOTSOCK because that is the
corresponding error value reported by the Windows versions of socket
functions.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf: avoid calling strbuf_grow() twice in strbuf_addbuf()
Implement strbuf_addbuf() as a normal function in order to avoid calling
strbuf_grow() twice, with the second callinside strbud_add() being a
no-op. This is slightly faster and also reduces the text size a bit.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the GPG prereq is not set, we do not run test 34. That
test changes the directory of the test script as a side
effect (something we usually frown on, but which matches the
style of the rest of this script). When test 35 (the
url-scrubbing test) runs, it expects to be in the directory
from test 34. If it's not, the test fails; we are in a
different sub-repo, our test-commit is built on a different
history, and the push becomes a non-fast-forward.
We can fix this by unconditionally moving to the directory
we expect (again, against our usual style but matching how
the rest of the script operates).
As an additional protection, let's also switch from "make a
new commit and push to master" to just "push to a new
branch". We don't care about the branch name; we just want
_some_ ref update to trigger the status output. Pushing to a
new branch is less likely to run into problems with
force-updates, changing the checked-out branch, etc.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
One part of "git am" had an oddball helper function that called
stuff from outside "his" as opposed to calling what we have "ours",
which was not gender-neutral and also inconsistent with the rest of
the system where outside stuff is usuall called "theirs" in
contrast to "ours".
General code clean-up around a helper function to write a
single-liner to a file.
* jk/write-file:
branch: use write_file_buf instead of write_file
use write_file_buf where applicable
write_file: add format attribute
write_file: add pointer+len variant
write_file: use xopen
write_file: drop "gently" form
branch: use non-gentle write_file for branch description
am: ignore return value of write_file()
config: fix bogus fd check when setting up default config
Improve the look of the way "git fetch" reports what happened to
each ref that was fetched.
* nd/fetch-ref-summary:
fetch: reduce duplicate in ref update status lines with placeholder
fetch: align all "remote -> local" output
fetch: change flag code for displaying tag update and deleted ref
fetch: refactor ref update status formatting code
git-fetch.txt: document fetch output
The test framework learned a new helper test_match_signal to
check an exit code from getting killed by an expected signal.
* jk/test-match-signal:
t/lib-git-daemon: use test_match_signal
test_must_fail: use test_match_signal
t0005: use test_match_signal as appropriate
tests: factor portable signal check out of t0005
There are certain house-keeping tasks that need to be performed at
the very beginning of any Git program, and programs that are not
built-in commands had to do them exactly the same way as "git"
potty does. It was easy to make mistakes in one-off standalone
programs (like test helpers). A common "main()" function that
calls cmd_main() of individual program has been introduced to
make it harder to make mistakes.
* jk/common-main:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
"git grep -i" has been taught to fold case in non-ascii locales
correctly.
* nd/icase:
grep.c: reuse "icase" variable
diffcore-pickaxe: support case insensitive match on non-ascii
diffcore-pickaxe: Add regcomp_or_die()
grep/pcre: support utf-8
gettext: add is_utf8_locale()
grep/pcre: prepare locale-dependent tables for icase matching
grep: rewrite an if/else condition to avoid duplicate expression
grep/icase: avoid kwsset when -F is specified
grep/icase: avoid kwsset on literal non-ascii strings
test-regex: expose full regcomp() to the command line
test-regex: isolate the bug test code
grep: break down an "if" stmt in preparation for next changes
The commands in the "log/diff" family have had an FILE* pointer in the
data structure they pass around for a long time, but some codepaths
used to always write to the standard output. As a preparatory step
to make "git format-patch" available to the internal callers, these
codepaths have been updated to consistently write into that FILE*
instead.
* js/log-to-diffopt-file:
mingw: fix the shortlog --output=<file> test
diff: do not color output when --color=auto and --output=<file> is given
t4211: ensure that log respects --output=<file>
shortlog: respect the --output=<file> setting
format-patch: use stdout directly
format-patch: avoid freopen()
format-patch: explicitly switch off color when writing to files
shortlog: support outputting to streams other than stdout
graph: respect the diffopt.file setting
line-log: respect diffopt's configured output file stream
log-tree: respect diffopt's configured output file stream
log: prepare log/log-tree to reuse the diffopt.close_file attribute
Fix recently introduced codepaths that are involved in parallel
submodule operations, which gave up on reading too early, and
could have wasted CPU while attempting to write under a corner
case condition.
* sb/submodule-parallel-fetch:
hoist out handle_nonblock function for xread and xwrite
xwrite: poll on non-blocking FDs
xread: retry after poll on EAGAIN/EWOULDBLOCK
fsck: optionally show more helpful info for broken links
When reporting broken links between commits/trees/blobs, it would be
quite helpful at times if the user would be told how the object is
supposed to be reachable.
With the new --name-objects option, git-fsck will try to do exactly
that: name the objects in a way that shows how they are reachable.
For example, when some reflog got corrupted and a blob is missing that
should not be, the user might want to remove the corresponding reflog
entry. This option helps them find that entry: `git fsck` will now
report something like this:
broken link from tree b5eb6ff... (refs/stash@{<date>}~37:)
to blob ec5cf80...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
blame: allow to blame paths freshly added to the index
When blaming files, changes in the work tree are taken into account
and displayed as being "Not Committed Yet".
However, when blaming a file that is not known to the current HEAD,
git blame fails with `no such path 'foo' in HEAD`, even when the file
was git add'ed.
Allowing such a blame is useful when the new file added to the index
(not yet committed) was created by renaming an existing file. It
also is useful when the new file was created from pieces already in
HEAD, moved or copied from other files and blaming with copy
detection (i.e. "-C").
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache-tree: do not generate empty trees as a result of all i-t-a subentries
If a subdirectory contains nothing but i-t-a entries, we generate an
empty tree object and add it to its parent tree. Which is wrong. Such
a subdirectory should not be added.
Note that this has a cascading effect. If subdir 'a/b/c' contains
nothing but i-t-a entries, we ignore it. But then if 'a/b' contains
only (the non-existing) 'a/b/c', then we should ignore 'a/b' while
building 'a' too. And it goes all the way up to top directory.
Noticed-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache-tree.c: fix i-t-a entry skipping directory updates sometimes
Commit 3cf773e (cache-tree: fix writing cache-tree when CE_REMOVE is
present - 2012-12-16) skips i-t-a entries when building trees objects
from the index. Unfortunately it may skip too much.
The code in question checks if an entry is an i-t-a one, then no tree
entry will be written. But it does not take into account that
directories can also be written with the same code. Suppose we have
this in the index.
We write an entry for a-file as normal and move on to subdir/file1,
where we realize the entry name for this level is simply just
"subdir", write down an entry for "subdir" then jump three items ahead
to the-last-file.
That is what happens normally when the first file in subdir is not an
i-t-a entry. If subdir/file1 is an i-t-a, because of the broken
condition in this code, we still think "subdir" is an i-t-a file and
not writing "subdir" down and jump to the-last-file. The result tree
now only has two items: a-file and the-last-file. subdir should be
there too (even though it only records two sub-entries, file2 and
file3).
If the i-t-a entry is subdir/file2 or subdir/file3, this is not a
problem because we jump over them anyway. Which may explain why the
bug is hidden for nearly four years.
Fix it by making sure we only skip i-t-a entries when the entry in
question is actual an index entry, not a directory.
Reported-by: Yuri Kanivetsky <yuri.kanivetsky@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fsck_options->name_objects is initialized, and if it already has
name(s) for the object(s) that are to be the starting point(s) for
fsck_walk(), then that function will now add names for the objects
that were walked.
This will be highly useful for teaching git-fsck to identify root causes
for broken links, which is the task for the next patch in this series.
Note that this patch opts for decorating the objects with plain strings
instead of full-blown structs (à la `struct rev_name` in the code of
the `git name-rev` command), for several reasons:
- the code is much simpler than if it had to work with structs that
describe arbitrarily long names such as "master~14^2~5:builtin/am.c",
- the string processing is actually quite light-weight compared to the
rest of fsck's operation,
- the caller of fsck_walk() is expected to provide names for the
starting points, and using plain and simple strings is just the
easiest way to do that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many places, we refer to objects via their SHA-1s. Let's abstract
that into a function.
For the moment, it does nothing else than what we did previously: print
out the 40-digit hex string. But that will change over the course of the
next patches.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to test linkage of pthread_create and pthread_join,
as pthread_mutex_* and pthread_key_* functions do not need
extra linkage under FreeBSD 10.3, leading to a false-positive
of the empty case.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
archive-tar: huge offset and future timestamps would not work on 32-bit
As we are not yet moving everything to size_t but still using ulong
internally when talking about the size of object, platforms with
32-bit long will not be able to produce tar archive with 4GB+ file,
and cannot grok 077777777777UL as a constant. Disable the extended
header feature and do not test it on them.
t0006: skip "far in the future" test when unsigned long is not long enough
Git's source code refers to timestamps as unsigned longs. On 32-bit
platforms, as well as on Windows, unsigned long is not large enough
to capture dates that are "absurdly far in the future".
While we can fix this issue properly by replacing unsigned long with
a larger type, we want to be a bit more conservative and just skip
those tests on the maint track.
Signed-off-by: Jeff King <peff@peff.net> Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In v1.8.5 days, 7f2ea5f0 (diff: allow lowercase letter to specify
what change class to exclude, 2013-07-17) taught the "--diff-filter"
mechanism to take lowercase letters as exclusion, but we forgot to
document it.
When we tried to fix in 58461bd (t1308: do not get fooled by symbolic
links to the source tree, 2016-06-02) an obscure case where the user
cd's into Git's source code via a symbolic link, a regression was
introduced that affects all test runs on Windows.
The original patch introducing the test case in question was careful to
use `$(pwd)` instead of `$PWD`.
This was done to account for the fact that Git's test suite uses shell
scripting even on Windows, where the shell's Unix-y paths are
incompatible with the main Git executable's idea of paths: it only
accepts Windows paths.
It is an awkward but necessary thing, then, to use `$(pwd)` (which gives
us a Windows path) when interacting with the Git executable and `$PWD`
(which gives the shell's idea of the current working directory in Unix-y
form) for shell scripts, including the test suite itself.
Obviously this broke the use case of the Git maintainer when changing
the working directory into Git's source code directory via a symlink,
i.e. when `$(pwd)` does not agree with `$PWD`.
However, we must not fix that use case at the expense of regressing
another use case.
Let's special-case Windows here, even if it is ugly, for lack of a more
elegant solution.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 47abd85 (fetch: Strip usernames from url's before
storing them, 2009-04-17) taught fetch to anonymize URLs.
The primary purpose there was to avoid sticking passwords in
merge-commit messages, but as a side effect, we also avoid
printing them to stderr.
The push side does not have the merge-commit problem, but it
probably should avoid printing them to stderr. We can reuse
the same anonymizing function.
Note that for this to come up, the credentials would have to
appear either on the command line or in a git config file,
neither of which is particularly secure. So people _should_
be switching to using credential helpers instead, which
makes this problem go away. But that's no excuse not to
improve the situation for people who for whatever reason end
up using credentials embedded in the URL.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git archive" learned to handle files that are larger than 8GB and
commits far in the future than expressible by the traditional US-TAR
format.
* jk/big-and-future-archive-tar:
archive-tar: drop return value
archive-tar: write extended headers for far-future mtime
archive-tar: write extended headers for file sizes >= 8GB
t5000: test tar files that overflow ustar headers
t9300: factor out portable "head -c" replacement
Git does not know what the contents in the index should be for a
path added with "git add -N" yet, so "git grep --cached" should not
show hits (or show lack of hits, with -L) in such a path, but that
logic does not apply to "git grep", i.e. searching in the working
tree files. But we did so by mistake, which has been corrected.
* nd/ita-cleanup:
grep: fix grepping for "intent to add" files
t7810-grep.sh: fix a whitespace inconsistency
t7810-grep.sh: fix duplicated test name
"git commit --amend --allow-empty-message -S" for a commit without
any message body could have misidentified where the header of the
commit object ends.
* js/sign-empty-commit-fix:
commit -S: avoid invalid pointer with empty message
More mark-up updates to typeset strings that are expected to
literally typed by the end user in fixed-width font.
* mm/doc-tt:
doc: typeset HEAD and variants as literal
CodingGuidelines: formatting HEAD in documentation
doc: typeset long options with argument as literal
doc: typeset '--' as literal
doc: typeset long command-line options as literal
doc: typeset short command-line options as literal
Documentation/git-mv.txt: fix whitespace indentation
More markings of messages for i18n, with updates to various tests
to pass GETTEXT_POISON tests.
One patch from the original submission dropped due to conflicts
with jk/upload-pack-hook, which is still in flux.
* va/i18n-even-more: (38 commits)
t5541: become resilient to GETTEXT_POISON
i18n: branch: mark comment when editing branch description for translation
i18n: unmark die messages for translation
i18n: submodule: escape shell variables inside eval_gettext
i18n: submodule: join strings marked for translation
i18n: init-db: join message pieces
i18n: remote: allow translations to reorder message
i18n: remote: mark URL fallback text for translation
i18n: standardise messages
i18n: sequencer: add period to error message
i18n: merge: change command option help to lowercase
i18n: merge: mark messages for translation
i18n: notes: mark options for translation
i18n: notes: mark strings for translation
i18n: transport-helper.c: change N_() call to _()
i18n: bisect: mark strings for translation
t5523: use test_i18ngrep for negation
t4153: fix negated test_i18ngrep call
t9003: become resilient to GETTEXT_POISON
tests: unpack-trees: update to use test_i18n* functions
...
fsck: use streaming interface for large blobs in pack
For blobs, we want to make sure the on-disk data is not corrupted
(i.e. can be inflated and produce the expected SHA-1). Blob content is
opaque, there's nothing else inside to check for.
For really large blobs, we may want to avoid unpacking the entire blob
in memory, just to check whether it produces the same SHA-1. On 32-bit
systems, we may not have enough virtual address space for such memory
allocation. And even on 64-bit where it's not a problem, allocating a
lot more memory could result in kicking other parts of systems to swap
file, generating lots of I/O and slowing everything down.
For this particular operation, not unpacking the blob and letting
check_sha1_signature, which supports streaming interface, do the job
is sufficient. check_sha1_signature() is not shown in the diff,
unfortunately. But if will be called when "data_valid && !data" is
false.
We will call the callback function "fn" with NULL as "data". The only
callback of this function is fsck_obj_buffer(), which does not touch
"data" at all if it's a blob.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: do not truncate result in-pack object size on 32-bit systems
A typical diff will not show what's going on and you need to see full
functions. The core code is like this, at the end of of write_one()
e->idx.offset = *offset;
size = write_object(f, e, *offset);
if (!size) {
e->idx.offset = recursing;
return WRITE_ONE_BREAK;
}
written_list[nr_written++] = &e->idx;
/* make sure off_t is sufficiently large not to wrap */
if (signed_add_overflows(*offset, size))
die("pack too large for current definition of off_t");
*offset += size;
Here we can see that the in-pack object size is returned by
write_object (or indirectly by write_reuse_object). And it's used to
calculate object offsets, which end up in the pack index file,
generated at the end.
If "size" overflows (on 32-bit sytems, unsigned long is 32-bit while
off_t can be 64-bit), we got wrong offsets and produce incorrect .idx
file, which may make it look like the .pack file is corrupted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: correct "offset" type in unpack_entry_data()
unpack_entry_data() receives an off_t value from unpack_raw_entry(),
which could be larger than unsigned long on 32-bit systems with large
file support. Correct the type so truncation does not happen. This
only affects bad object reporting though.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: report correct bad object offsets even if they are large
Use the right type for offsets in this case, off_t, which makes a
difference on 32-bit systems with large file support, and change
formatting code accordingly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_file.c: use type off_t* for object_info->disk_sizep
This field, filled by sha1_object_info() contains the on-disk size of
an object, which could go over 4GB limit of unsigned long on 32-bit
systems. Use off_t for it instead and update all callers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
absolute_path() is a wrapper for strbuf_add_absolute_path(). Call the
latter directly for adding absolute paths to a strbuf. That's shorter
and avoids an extra string copy.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge: avoid "safer crlf" during recording of merge results
When merge_recursive() decides what the correct blob object merge
result for a path should be, it uses update_file_flags() helper
function to write it out to a working tree file and then calls
add_cacheinfo(). The add_cacheinfo() function in turn calls
make_cache_entry() to create a new cache entry to replace the
higher-stage entries for the path that represents the conflict.
The make_cache_entry() function calls refresh_cache_entry() to fill
in the cached stat information. To mark a cache entry as
up-to-date, the data is re-read from the file in the working tree,
and goes through convert_to_git() conversion to be compared with the
blob object name the new cache entry records.
It is important to note that this happens while the higher-stage
entries, which are going to be replaced with the new entry, are
still in the index. Unfortunately, the convert_to_git() conversion
has a misguided "safer crlf" mechanism baked in, and looks at the
existing cache entry for the path to decide how to convert the
contents in the working tree file. If our side (i.e. stage#2)
records a text blob with CRLF in it, even when the system is
configured to record LF in blobs and convert them to CRLF upon
checkout (and back to LF upon checkin), the "safer crlf" mechanism
stops us doing so.
This especially poses a problem during a renormalizing merge, where
the merge result for the path is computed by first "normalizing" the
blobs involved in the merge by using convert_to_working_tree()
followed by convert_to_git() with "safer crlf" disabled. The merge
result that is computed correctly and fed to add_cacheinfo() via
update_file_flags() does _not_ match what refresh_cache_entry() sees
by converting the working tree file via convert_to_git().
We can work this around by not refreshing the new cache entry in
make_cache_entry() called by add_cacheinfo(). After add_cacheinfo()
adds the new entry, we can call refresh_cache_entry() on that,
knowing that addition of this new cache entry would have removed the
stale cache entries that had CRLF in stage #2 that were carried over
before the renormalizing merge started and will not interfere with
the correct recording of the result.
The test update was taken from a series by Torsten Bögershausen
that attempted to fix this with a different approach.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Torsten Bögershausen <tboegi@web.de>
pack-objects: pass length to check_pack_crc() without truncation
On 32 bit systems with large file support, unsigned long is 32-bit
while the two offsets in the subtraction expression (pack-objects has
the exact same expression as in sha1_file.c but not shown in diff) are
in 64-bit. If an in-pack object is larger than 2^32 len/datalen is
truncated and we get a misleading "error: bad packed object CRC for
..." as a result.
Use off_t for len and datalen. check_pack_crc() already accepts this
argument as off_t and can deal with 4+ GB.
Noticed-by: Christoph Michelbach <michelbach94@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Install the "apache" package to run the Git web server tests on
Travis-CI Linux build machines. The tests are already executed on OS X
build machines since the apache web server is installed by default.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust t4201 to pass on Windows; a couple of test cases need to be
skipped on Windows which leads to a different shortlog than on Linux.
Let's just fix that by limiting the shortlog's commit range to traverse
only one commit: that guarantees that it does not matter how many test
cases were skipped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to adjust this code path after moving the test helpers to
t/helper/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: fix a double off-by-one with --ignore-space-at-eol
When comparing two lines, ignoring any whitespace at the end, we first
try to match as many bytes as possible and break out of the loop only
upon mismatch, to let the remainder be handled by the code shared with
the other whitespace-ignoring code paths.
When comparing the bytes, however, we incremented the counters always,
even if the bytes did not match. And because we fall through to the
space-at-eol handling at that point, it is as if that mismatch never
happened.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.mak.uname: define NEEDS_LIBRT under Linux, for now
My Debian wheezy LTS system is still on glibc 2.13; and LTS
distros may use older glibc, still, so lets not unnecessarily
break things out-of-the-box.
We seem to assume Linux is using glibc in our Makefiles anyways,
so I don't think this will introduce new breakage for users of
alternative libc implementations.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top level documentation "git help git" still pointed at the
documentation set hosted at now-defunct google-code repository.
Update it to point to https://git.github.io/htmldocs/git.html
instead.
* jn/preformatted-doc-url:
doc: git-htmldocs.googlecode.com is no more
Merge branch 'ao/p4-has-branch-prefix-fix' into maint
A bug, which caused "git p4" while running under verbose mode to
report paths that are omitted due to branch prefix incorrectly, has
been fixed; the command said "Ignoring file outside of prefix" for
paths that are _inside_.