git-gui: Support resolving conflicts via the diff context menu.
If the file has merge conflicts, show a special version of the
diff context menu, which includes conflict resolution commands
instead of Stage Hunk/Line. This patch only supports resolving
by discarding all sides except one.
Discarding is the only way to resolve conflicts involving symlinks
and/or deletion, excluding manual editing.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git <tab><tab> still shows way too many commands, some of them
are clearly plumbing. This patch hides the plumbing commands
liberally (that is, in special cases, users still might want to
call one of the hidden commands, a *normal* workflow should never
involve these, though - and if it does, we have a UI problem anyway).
Signed-off-by: Petr Baudis <pasky@suse.cz> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start 1.6.0.2 maintenance cycle
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
Fix passwd(5) ref and reflect that commit doens't use commit-tree
improve handling of sideband message display
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
checkout: fix message when leaving detached HEAD
clone: fix creation of explicitly named target directory
'git foo' program identifies itself without dash in die() messages
setup_git_directory(): fix move to worktree toplevel directory
update-index: fix worktree setup
Start conforming code to "git subcmd" style
read-tree: setup worktree if merge is required
grep: fix worktree setup
diff*: fix worktree setup
* ho/dashless:
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
'git foo' program identifies itself without dash in die() messages
Start conforming code to "git subcmd" style
Currently the code looks for line break characters in order to prepend
"remote: " to every line received as many lines can be sent in a single
chunk. However the opposite might happen too, i.e. a single message
line split amongst multiple chunks. This patch adds support for the
later case to avoid displays like:
Previous HEAD position was 1234abcd... commit subject line
when leaving a detached HEAD for another commit. Ths C
version attempted to implement this, but got the condition
wrong such that the behavior never triggered.
This patch simplifies the conditions for showing the message
to the ones used by the shell version: any time we are
leaving a detached HEAD and the new and old commits are not
the same (this suppresses it for the "git checkout -b new"
case recommended when you enter the detached state).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone: fix creation of explicitly named target directory
'git clone <repo> path/' (note the trailing slash) fails, because the
entire path is interpreted as leading directories. So when mkdir tries to
create the actual path, it already exists.
This makes sure trailing slashes are removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/filter-branch:
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
Documentation: rev-list-options: move --simplify-merges documentation
filter-branch: use --simplify-merges
filter-branch: fix ref rewriting with --subdirectory-filter
filter-branch: Extend test to show rewriting bug
Topo-sort before --simplify-merges
revision traversal: show full history with merge simplification
revision.c: whitespace fix
* np/maint-safer-pack:
fixup_pack_header_footer(): use nicely aligned buffer sizes
index-pack: use fixup_pack_header_footer()'s validation mode
pack-objects: use fixup_pack_header_footer()'s validation mode
improve reliability of fixup_pack_header_footer()
pack-objects: improve returned information from write_one()
This patch turns ref markers for tags and heads into links to
appropriate views for the ref name, depending on current context.
For annotated tags, we link to the tag view, unless that's the current
view, in which case we switch to shortlog. For other refs, we prefer the
current view if it's history or (short)log, and default to shortlog
otherwise.
Appropriate changes are made in the CSS to prevent ref markers from
being annoyingly blue and underlined, unless hovered. A visual
indication of the target view difference is also implemented by making
annotated tags show up in italic.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Petr Baudis <pasky@suse.cz> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Makefile: add merge_recursive.h to LIB_H
Improve documentation for --dirstat diff option
Bring local clone's origin URL in line with that of a remote clone
Documentation: minor cleanup in a use case in 'git stash' manual
Documentation: fix disappeared lines in 'git stash' manpage
Documentation: fix reference to a for-each-ref option
When modifying merge-recursive.h, for example builtin-merge-recursive.c
have to be recompiled which was not true till now, causing various
runtime errors using an incremental build.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring local clone's origin URL in line with that of a remote clone
On a local clone, "git clone" would use the fully DWIMmed path as the origin
URL in the resulting repo. This was slightly inconsistent with the case of a
remote clone where the _given_ URL was used as the origin URL (because the
DWIMming was done remotely, and was therefore not available to "git clone").
This behaviour caused problems when cloning a local non-bare repo with
relative submodule URLs, because these submodule URLs would then be resolved
against the DWIMmed URL (e.g. "/repo/.git") instead of the given URL (e.g.
"/repo").
This patch teaches "git clone" to use the _given_ URL - instead of the
DWIMmed path - as the origin URL. This causes relative submodule URLs to be
resolved correctly, as long the _given_ URL indicates the correct directory
against which the submodule URLs should be resolved.
The patch also updates a testcase that contained the old-style origin URLs.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: fix disappeared lines in 'git stash' manpage
Asciidoc removes lines starting with a dot when creating manpages.
Since those lines were comments in use case examples showing shell
commands, preceed those lines with a hash sign.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems (like e.g. OpenSolaris) define pid_t as long,
therefore all our sprintf that use %i/%d cause a compiler warning
beacuse of the implicit long->int cast. To make sure that
we fit the limits, we display pids as PRIuMAX and cast them explicitly
to uintmax_t.
Signed-off-by: David Soria Parra <dsp@php.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS section of gitattibutes and gitmodule fail to clearly
specify the name of the in tree files used. This patch brings in the
initial `.' and the fact that the `.gitmodules' file should reside at
the top-level of the working tree.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add help.autocorrect to enable/disable autocorrecting
It is off(0) by default, to avoid scaring people unless they asked to.
If set to a non-0 value, wait for that amount of deciseconds before
running the corrected command.
Suggested by Junio, so he has a chance to hit Ctrl-C.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a modified Damerau-Levenshtein algorithm into
Git's code base, and uses it with the following penalties to show some
similar commands when an unknown command was encountered:
$ git sm
git: 'sm' is not a git-command. See 'git --help'.
Did you mean one of these?
am
rm
The cut-off is at similarity rating 6, which was empirically determined
to give sensible results.
As a convenience, if there is only one candidate, Git continues under
the assumption that the user mistyped it. Example:
$ git reabse
WARNING: You called a Git program named 'reabse', which does
not exist.
Continuing under the assumption that you meant 'rebase'
[...]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_git_directory(): fix move to worktree toplevel directory
When setup_git_directory() returns successfully, it is supposed to move
current working directory to worktree toplevel directory.
However, the code recomputing prefix inside setup_git_directory() has
to move cwd back to original working directory, in order to get new
prefix. After that, it should move cwd back to worktree toplevel
directory as expected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git commit --author=$name: look $name up in existing commits
This allows "git commit --author=$name" to accept a name that is not in
the required "A U Thor <author@example.xz>" format, and use that to look
up an author name that matches from existing commits.
When using this feature, it is the user's responsibility to give a name
that uniquely matches the name s/he wants, as the logic returns the name
from the first matching commit.
When the tracked contents have CRLF line endings, colored diff output
shows "^M" at the end of output lines, which is distracting, even though
the pager we use by default ("less") knows to hide them.
The problem is that "less" hides a carriage-return only at the end of the
line, immediately before a line feed. The colored diff output does not
take this into account, and emits four element sequence for each line:
- force this color;
- the line up to but not including the terminating line feed;
- reset color
- line feed.
By including the carriage return at the end of the line in the second
item, we are breaking the smart our pager has in order not to show "^M".
This can be fixed by changing the sequence to:
- force this color;
- the line up to but not including the terminating end-of-line;
- reset color
- end-of-line.
where end-of-line is either a single linefeed or a CRLF pair. When the
output is not colored, "force this color" and "reset color" sequences are
both empty, so we won't have this problem with or without this patch.
* maint:
gitattributes: -crlf is not binary
git-apply: Loosen "match_beginning" logic
Fix example in git-name-rev documentation
shell: do not play duplicated definition games to shrink the executable
Fix use of hardlinks in "make install"
pack-objects: Allow missing base objects when creating thin packs
The description of crlf attribute incorrectly said that "-crlf" means
binary. It is true that for binary files you would want "-crlf", but
that is not the same thing.
We also have supported attribute macros and via that mechanism a handy
"binary" to specify "-crlf -diff" at the same time. It was not documented
anywhere as far as I can tell, even though the support was there from
the very beginning.
Merge branch 'jc/post-simplify' (early part) into tr/filter-branch
* 'jc/post-simplify' (early part):
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
Even after a handfle attempts, match_beginning logic still has corner
cases:
1bf1a85 (apply: treat EOF as proper context., 2006-05-23) 65aadb9 (apply: force matching at the beginning., 2006-05-24) 4be6096 (apply --unidiff-zero: loosen sanity checks ..., 2006-09-17) ee5a317 (Fix "git apply" to correctly enforce "match ..., 2008-04-06)
This is a tricky piece of code.
We still incorrectly enforce "match_beginning" for -U0 matches.
I noticed this while trying out an example sequence from Clemens Buchacher:
$ echo a >victim
$ git add victim
$ echo b >>victim
$ git diff -U0 >patch
$ cat patch
diff --git i/victim w/victim
index 7898192..422c2b7 100644
--- i/victim
+++ w/victim
@@ -1,0 +2 @@ a
+b
$ git apply --cached --unidiff-zero <patch
$ git show :victim
b
a
The change inserts a new line before the second line, but we insist it to
be applied at the beginning. As the result, the code refuses to apply it
at the original offset, and we end up adding the line at the beginning.
Updates to the test script are by Clemens Buchacher.
Since 59d3f54 (name-rev: avoid "^0" when unneeded, 2007-02-20), name-rev
stopped showing an unnecessary "^0" to dereference a tag down to a commit.
The patch should have made a matching update to the documentation, but we
forgot.
The code failed to filter-out git-add properly on platforms were $X is
not empty (ATM there is only one such a platform).
Than it tried to create a hardlink to the file ($execdir/git-add) it just
removed (because git-add is first in the BUILT_INS), so ln failed (but
because stderr was redirected into /dev/null the error was never seen), and
the whole install ended up using "ln -s" instead.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-list: fix --reverse interaction with --parents
--reverse did not interact well with --parents, as the included test
case shows: in a history like
A--B.
\ \
`C--M--D
the command
git rev-list --reverse --parents --full-history HEAD
erroneously lists D as having no parents at all. (Without --reverse,
it correctly lists M.)
This is caused by the machinery driving --reverse: it first grabs all
commits through the normal routines, then runs them through the same
routines again, effectively simplifying them twice.
Fix this by moving the --reverse one level up, into get_revision().
This way we can cleanly grab all commits via the normal calls, then
just pop them off the list one by one without interfering with
get_revision_internal().
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fixup_pack_header_footer(): use nicely aligned buffer sizes
It should be more efficient to use nicely aligned buffer sizes, either
for filesystem operations or SHA1 checksums. Also, using a relatively
small nominal size might allow for the data to remain in L1 cache
between both SHA1_Update() calls.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: use fixup_pack_header_footer()'s validation mode
When completing a thin pack, a new header has to be written to
the pack and a new SHA1 computed. Make sure that the SHA1 of what
is being read back matches the SHA1 of what was written for both:
the original pack and the appended objects.
To do so, a couple write_or_die() calls were converted to sha1write()
which has the advantage of doing some buffering as well as handling
SHA1 and CRC32 checksum already.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: use fixup_pack_header_footer()'s validation mode
When limiting the pack size, a new header has to be written to the
pack and a new SHA1 computed. Make sure that the SHA1 of what is being
read back matches the SHA1 of what was written.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, this function has the potential to read corrupted pack data
from disk and give it a valid SHA1 checksum. Let's add the ability to
validate SHA1 checksum of existing data along the way, including before
and after any arbitrary point in the pack.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: improve returned information from write_one()
This function returns 0 when the current object couldn't be written
due to the pack size limit, otherwise the current offset in the pack.
There is a problem with this approach however, since current object
could be a delta and its delta base might just have been written in
the same write_one() call, but those successfully written objects are
not accounted in the offset variable tracked by the caller. Currently
this is not an issue but a subsequent patch will need this.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-help: fallback to GIT_MAN_VIEWER before man
In some situations it is useful to be able to switch viewers via the
environment, e.g. in Emacs shell buffers. So check the GIT_MAN_VIEWER
environment variable and try it before falling back to "man".
Signed-off-by: Romain Francoise <romain@orebokech.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tutorial: gentler illustration of Alice/Bob workflow using gitk
pretty=format: respect date format options
make git-shell paranoid about closed stdin/stdout/stderr
Document gitk --argscmd flag.
Fix '--dirstat' with cross-directory renaming
for-each-ref: Allow a trailing slash in the patterns
git-p4: Fix checkout bug when using --import-local.
When this option is passed to git p4 clone, the checkout at the end would
previously fail. This patch fixes it by optionally creating the master branch
from refs/heads/p4/master, which is the correct one for this option.
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com> Acked-By: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
the date option was ignored. This patch causes it to use whatever
format was specified by --date (or by --relative-date, etc), just
as the non-user formats would do.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
make git-shell paranoid about closed stdin/stdout/stderr
It is in general unsafe to start a program with one or more of file
descriptors 0/1/2 closed. Karl Chen for example noticed that stat_command
does this in order to rename a pipe file descriptor to 0:
dup2(from, 0);
close(from);
... but if stdin was closed (for example) from == 0, so that
dup2(0, 0);
close(0);
just ends up closing the pipe. Another extremely rare but nasty problem
would occur if an "important" file ends up in file descriptor 2, and is
corrupted by a call to die().
Fixing this in git was considered to be overkill, so this patch works
around it only for git-shell. The fix is simply to open all the "low"
descriptors to /dev/null in main.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Acked-by: Stephen R. van den Berg <srb@cuci.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dirstat code depends on the fact that we always generate diffs with
the names sorted, since it then just does a single-pass walk-over of the
sorted list of names and how many changes there were. The sorting means
that all files are nicely grouped by directory.
That all works fine.
Except when we have rename detection, and suddenly the nicely sorted list
of pathnames isn't all that sorted at all. And now the single-pass dirstat
walk gets all confused, and you can get results like this:
Spot the difference. In case anybody wonders: it's because of a ton of
renames from {include/asm-blackfin => arch/blackfin/include/asm} that just
totally messed up the file ordering in between arch/arm and arch/powerpc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
for-each-ref: Allow a trailing slash in the patterns
More often than not, I end up using something like refs/remotes/ as the
pattern for for-each-ref, but that doesn't work, because it expects to see
the slash in the ref name right after the matched pattern. So teach it to
accept the slash as the final character in the pattern as well.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
is a c99 construct which some compilers do not support even though they
support other c99 constructs. This construct can be avoided by folding
these 'special' test cases into the sane_ctype array and making use of
the related infrastructure.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes "git diff", "git diff-files" and "git diff-index" to work
correctly under worktree setup. Because diff* family works in many modes
and not all of them require worktree, Junio made a nice summary
(with a little modification from me):
* diff-files is about comparing with work tree, so it obviously needs a
work tree;
* diff-index also does, except "diff-index --cached" or "diff --cached TREE"
* no-index is about random files outside git context, so it obviously
doesn't need any work tree;
* comparing two (or more) trees doesn't;
* comparing two blobs doesn't;
* comparing a blob with a random file doesn't;
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one good revision is not an ancestor of the bad revision, the
merge bases between the good and the bad revision should be checked
to make sure that they are also good revisions.
A previous patch takes care of that, but it may check the merge bases
more often than really needed. In fact the previous patch did not try
to optimize this as much as possible because it is not so simple. So
this is the purpose of this patch.
One may think that when all the merge bases have been checked then
we can save a flag, so that we don't need to check the merge bases
again during the bisect process.
The problem is that the user may choose to checkout and test
something completely different from what the bisect process
suggested. In this case we have to check the merge bases again,
because there may be new merge bases relevant to the bisect
process.
That's why, in this patch, when we detect that the user tested
something else than what the bisect process suggested, we remove
the flag that says that we don't need to check the merge bases
again.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: test merge base if good rev is not an ancestor of bad rev
Before this patch, "git bisect", when it was given some good revs that
are not ancestor of the bad rev, didn't check if the merge bases were
good. "git bisect" just supposed that the user knew what he was doing,
and that, when he said the revs were good, he knew that it meant that
all the revs in the history leading to the good revs were also
considered good.
But in pratice, the user may not know that a good rev is not an
ancestor of the bad rev, or he may not know/remember that all revs
leading to the good rev will be considered good. So he may give a good
rev that is a sibling, instead of an ancestor, of the bad rev, when in
fact there can be one rev becoming good in the branch of the good rev
(because the bug was already fixed there, for example) instead of one
rev becoming bad in the branch of the bad rev.
For example, if there is the following history:
A--B--C--D
\
E--F
and we launch "git bisect start D F" then only C and D would have been
considered as possible first bad commit before this patch. This could
invite user errors; F could be the commit that fixes the bug that exists
everywhere else.
The purpose of this patch is to detect when "git bisect" is passed
some good revs that are not ancestors of the bad rev, and then to first
ask the user to test the merge bases between the good and bad revs.
If the merge bases are good then all is fine, we can continue
bisecting. Otherwise, if one merge base is bad, it means that the
assumption that all revs leading to the good one are good too is
wrong and we error out. In the case where one merge base is skipped we
issue a warning and then continue bisecting anyway.
These checks will also catch the case where good and bad have been
mistaken. This means that we can remove the check that was done latter
on the output of "git rev-list --bisect-vars".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/merge-custom:
t7606: fix custom merge test
Fix "git-merge -s bogo" help text
Update .gitignore to ignore git-help
Builtin git-help.
builtin-help: always load_command_list() in cmd_help()
Add a second testcase for handling invalid strategies in git-merge
Add a new test for using a custom merge strategy
builtin-merge: allow using a custom strategy
builtin-help: make some internal functions available to other builtins
Some platforms contaminate the preprocessor token namespace with their own
definition of SS without being asked. Avoid getting hit by redefinition
warning messages by explicitly undef SS, AA and DD shorthand we use in this
table definition.
index-pack: be careful after fixing up the header/footer
The index-pack command, when processing a thin pack, fixed up the pack
after-the-fact. It forgets to fsync the result, because it only did that
in one path rather in all cases of fixup.
This moves the fsync_or_die() to the fix-up routine itself, rather than
doing it in one of the callers, so that all cases are covered.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to abort the submission of a change to Perforce
Currently it is not possible to skip the submission of a change to Perforce
when running git-p4 submit. This patch compares the modification time before
and after the submit editor invokation and offers a prompt for skipping if
the submit template file was not saved.
Signed-off-by: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>