Merge branch 'jc/maint-checkout-fileglob-doc' into maint-1.7.11
* jc/maint-checkout-fileglob-doc:
gitcli: contrast wildcard given to shell and to git
gitcli: formatting fix
Document file-glob for "git checkout -- '*.c'"
log --grep/--author: honor --all-match honored for multiple --grep patterns
When we have both header expression (which has to be an OR node by
construction) and a pattern expression (which could be anything), we
create a new top-level OR node to bind them together, and the
resulting expression structure looks like this:
OR
/ \
/ \
pattern OR
/ \ / \
..... committer OR
/ \
author TRUE
The three elements on the top-level backbone that are inspected by
the "all-match" logic are "pattern", "committer" and "author". When
there are more than one elements in the "pattern", the top-level
node of the "pattern" part of the subtree is an OR, and that node is
inspected by "all-match".
The result ends up ignoring the "--all-match" given from the command
line. A match on either side of the pattern is considered a match,
hence:
git log --grep=A --grep=B --author=C --all-match
shows the same "authored by C and has either A or B" that is correct
only when run without "--all-match".
Fix this by turning the resulting expression around when "--all-match"
is in effect, like this:
OR
/ \
/ \
/ OR
committer / \
author \
pattern
The set of nodes on the top-level backbone in the resulting
expression becomes "committer", "author", and the nodes that are on
the top-level backbone of the "pattern" subexpression. This makes
the "all-match" logic inspect the same nodes in "pattern" as the
case without the author and/or the committer restriction, and makes
the earlier "log" example to show "authored by C and has A and has
B", which is what the command line expects.
When threaded grep is in effect, the patterns are duplicated and
recompiled for each thread. Avoid "--debug" output during the
recompilation so that the output is given once instead of "1+nthreads"
times.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our "grep" allows complex boolean expressions to be formed to match
each individual line with operators like --and, '(', ')' and --not.
Introduce the "--debug" option to show the parse tree to help people
who want to debug and enhance it.
Also "log" learns "--grep-debug" option to do the same. The command
line parser to the log family is a lot more limited than the general
"git grep" parser, but it has special handling for header matching
(e.g. "--author"), and a parse tree is valuable when working on it.
Note that "--all-match" is *not* any individual node in the parse
tree. It is an instruction to the evaluator to check all the nodes
in the top-level backbone have matched and reject a document as
non-matching otherwise.
This reverts the i18n part of 7f81463 (Use correct grammar in diffstat
summary line - 2012-02-01) but still keeps the grammar correctness for
English. It also reverts b354f11 (Fix tests under GETTEXT_POISON on
diffstat - 2012-08-27). The result is diffstat always in English
for all commands.
This helps stop users from accidentally sending localized
format-patch'd patches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
attr: failure to open a .gitattributes file is OK with ENOTDIR
Often we consult an in-tree .gitattributes file that exists per
directory. Majority of directories do not usually have such a file,
and it is perfectly fine if we cannot open it because there is no
such file, but we do want to know when there is an I/O or permission
error. Earlier, we made the codepath warn when we fail to open it
for reasons other than ENOENT for that reason.
We however sometimes have to attempt to open the .gitattributes file
from a directory that does not exist in the commit that is currently
checked out. "git pack-objects" wants to know if a path is marked
with "-delta" attributes, and "git archive" wants to know about
export-ignore and export-subst attributes. Both commands may and do
need to ask the attributes system about paths in an arbitrary
commit. "git diff", after removing an entire directory, may want to
know textconv on paths that used to be in that directory.
Make sure we also ignore a failure to open per-directory attributes
file due to ENOTDIR.
The discussion of email subject throughout the documentation is
misleading; it indicates that the first line will always become
the subject. In fact, the subject is generally all lines up until
the first full blank line.
This patch refines that, and makes more use of the concept of a
commit title, with the title being all text up to the first blank line.
Signed-off-by: Jeremy White <jwhite@codeweavers.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jc/apply-binary-p0' into maint-1.7.11
"git apply -p0" did not parse pathnames on "diff --git" line
correctly. This caused patches that had pathnames in no other
places to be mistakenly rejected (most notably, binary patch that
does not rename nor change mode). Textual patches, renames or mode
changes have preimage and postimage pathnames in different places in
a form that can be parsed unambiguously and did not suffer from this
problem.
* jc/apply-binary-p0:
apply: compute patch->def_name correctly under -p0
Merge branch 'jc/dotdot-is-parent-directory' into maint-1.7.11
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
Merge branch 'jc/maint-doc-checkout-b-always-takes-branch-name' into maint-1.7.11
The synopsis said "checkout [-B branch]" to make it clear the
branch name is a parameter to the option, but the heading for the
option description was "-B::", not "-B branch::", making the
documentation misleading.
* jc/maint-doc-checkout-b-always-takes-branch-name:
doc: "git checkout -b/-B/--orphan" always takes a branch name
Merge branch 'jk/maint-http-half-auth-push' into maint-1.7.11
Pushing to smart HTTP server with recent Git fails without having
the username in the URL to force authentication, if the server is
configured to allow GET anonymously, while requiring authentication
for POST.
* jk/maint-http-half-auth-push:
http: prompt for credentials on failed POST
http: factor out http error code handling
t: test http access to "half-auth" repositories
t: test basic smart-http authentication
t/lib-httpd: recognize */smart/* repos as smart-http
t/lib-httpd: only route auth/dumb to dumb repos
t5550: factor out http auth setup
t5550: put auth-required repo in auth/dumb
ll-merge: warn about inability to merge binary files only when we can't
When a path being merged is auto detected to be a binary file, we
warned "Cannot merge binary files" before switching to activate the
binary ll-merge driver. When we are merging with the -Xours/theirs
option, however, we know what the "clean" merge result is, and the
warning is inappropriate.
In addition, when the path is explicitly marked as a binary file,
this warning was not issued, even though without -Xours/theirs, we
cannot cleanly automerge such a path, which was inconsistent.
Move the warning code from ll_xdl_merge() to ll_binary_merge(), and
issue the message only when we cannot cleanly automerge.
blame: allow "blame file" in the middle of a conflicted merge
"git blame file" has always meant "find the origin of each line of
the file in the history leading to HEAD, oh by the way, blame the
lines that are modified locally to the working tree".
This teaches "git blame" that during a conflicted merge, some
uncommitted changes may have come from the other history that is
being merged.
The verify_working_tree_path() function introduced in the previous
patch to notice a typo in the filename (primarily on case insensitive
filesystems) has been updated to allow a filename that does not exist
in HEAD (i.e. the tip of our history) as long as it exists one of the
commits being merged, so that a "we deleted, the other side modified"
case tracks the history of the file in the history of the other side.
* jc/capabilities:
fetch-pack: mention server version with verbose output
parse_feature_request: make it easier to see feature values
fetch-pack: do not ask for unadvertised capabilities
do not send client agent unless server does first
send-pack: fix capability-sending logic
include agent identifier in capability string
* jk/check-docs-update:
check-docs: get documented command list from Makefile
check-docs: drop git-help special-case
check-docs: list git-gui as a command
check-docs: factor out command-list
command-list: mention git-credential-* helpers
command-list: add git-sh-i18n
check-docs: update non-command documentation list
check-docs: mention gitweb specially
* jc/test-prereq:
t3910: use the UTF8_NFD_TO_NFC test prereq
test-lib: provide UTF8 behaviour as a prerequisite
t0050: use the SYMLINKS test prereq
t0050: use the CASE_INSENSITIVE_FS test prereq
test-lib: provide case insensitivity as a prerequisite
test: allow prerequisite to be evaluated lazily
test: rename $satisfied to $satisfied_prereq
run-command.c: fix broken list iteration in clear_child_for_cleanup
Iterate through children_to_clean using 'next' fields but with an
extra level of indirection. This allows us to update the chain when
we remove a child and saves us managing several variables around
the loop mechanism.
Signed-off-by: David Gould <david@optimisefitness.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
blame $path: avoid getting fooled by case insensitive filesystems
"git blame MAKEFILE" run in a history that has "Makefile" but not
MAKEFILE can get confused on a case insensitive filesystem, because
the check we run to see if there is a corresponding file in the
working tree with lstat("MAKEFILE") succeeds. In addition to that
check, we have to make sure that the given path also exists in the
commit we start digging history from (i.e. "HEAD").
Note that this reveals the breakage in a test added in cd8ae20
(git-blame shouldn't crash if run in an unmerged tree, 2007-10-18),
which expects the entire merge-in-progress path to be blamed to the
working tree when it did not exist in our tree. As it is clear in
the log message of that commit, the old breakage was that it was
causing an internal error and the fix was about avoiding it.
Just check that the command does not die an uncontrolled death. For
this particular case, the blame should fail, as the history for the
file in that contents has not been committed yet at the point in the
test.
* maint-1.7.11:
Almost 1.7.11.6
gitweb: URL-decode $my_url/$my_uri when stripping PATH_INFO
rebase -i: use full onto sha1 in reflog
sh-setup: protect from exported IFS
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
setup: clarify error messages for file/revisions ambiguity
send-email: improve RFC2047 quote parsing
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
Merge branch 'jc/maint-protect-sh-from-ifs' into maint-1.7.11
When the user exports a non-default IFS without HT, scripts that
rely on being able to parse "ls-files -s | while read a b c..."
start to fail. Protect them from such a misconfiguration.
* jc/maint-protect-sh-from-ifs:
sh-setup: protect from exported IFS
Merge branch 'bc/receive-pack-stdout-protection' into maint-1.7.11
When "git push" triggered the automatic gc on the receiving end, a
message from "git prune" that said it was removing cruft leaked to
the standard output, breaking the communication protocol.
* bc/receive-pack-stdout-protection:
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
Merge branch 'jk/maint-null-in-trees' into maint-1.7.11
"git diff" had a confusion between taking data from a path in the
working tree and taking data from an object that happens to have
name 0{40} recorded in a tree.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
Merge branch 'mm/die-with-dashdash-help' into maint-1.7.11
When the user gives an argument that can be taken as both a
revision name and a pathname without disambiguating with "--", we
used to give a help message "Use '--' to separate". The message
has been clarified to show where that '--' goes on the command
line.
* mm/die-with-dashdash-help:
setup: clarify error messages for file/revisions ambiguity
gitcli: contrast wildcard given to shell and to git
People who are not used to working with shell may intellectually
understand how the command line argument is massaged by the shell
but still have a hard time visualizing the difference between
letting the shell expand fileglobs and having Git see the fileglob
to use as a pathspec.
The paragraph to encourage use of "--" in scripts belongs to the
bullet point that describes the behaviour for a command line without
the explicit "--" disambiguation; it is not a supporting explanation
for the entire bulletted list, and it is wrong to make it a separate
paragraph outside the list.
attr: "binary" attribute should choose built-in "binary" merge driver
The built-in "binary" attribute macro expands to "-diff -text", so
that textual diff is not produced, and the contents will not go
through any CR/LF conversion ever. During a merge, it should also
choose the "binary" low-level merge driver, but it didn't.
merge: teach -Xours/-Xtheirs to binary ll-merge driver
The (discouraged) -Xours/-Xtheirs modes of merge are supposed to
give a quick and dirty way to come up with a random mixture of
cleanly merged parts and punted conflict resolution to take contents
from one side in conflicting parts. These options however were only
passed down to the low level merge driver for text.
Teach the built-in binary merge driver to notice them as well.
Tag contents, once read, are forever cached in memory.
This makes gitk unable to notice when tag contents change.
Allow users to cause a reload of the tag contents by using
the "File->Reread references" action.
Reported-by: Tim McCormack <cortex@brainonfire.net> Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
While looking for a way to expand the URL of a remote
that uses a 'url.<name>.insteadOf' config option I stumbled
over the undocumented '--get-url' option of 'git ls-remote'.
This adds some minimum documentation for that option.
And while at it, also add that option to the '-h' output.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch --all: pass --tags/--no-tags through to each remote
When fetch is invoked with --all, we need to pass the tag-following
preference to each individual fetch; without this, we will always
auto-follow tags, preventing us from fetching the remote tags into a
remote-specific namespace, for example.
Reported-by: Oswald Buddenhagen <ossi@kde.org> Signed-off-by: Dan Johnson <ComputerDruid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: initial_to and initial_reply_to are both optional
We may pick up additional recipients from the format-patch output
files we are sending, in which case it is perfectly valid to leave
the @initial_to empty when the prompt asks. We may want to start
a new discussion thread without replying to anything, and it is
valid to leave $initial_reply_to empty.
An earlier update to avoid y@example.com stuffed in address fields
did not take these two cases into account.
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: move rev-list option -<n> from git-log.txt to rev-list-options.txt
rev-list-options.txt is included in git-rev-list.txt. This makes sure
rev-list man page also shows that, and at one place, together with
equivalent options -n and --max-count.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
All remote subcommands are spelled out words except 'rm'. 'rm', being a
popular UNIX command name, may mislead users that there are also 'ls' or
'mv'. Use 'remove' to fit with the rest of subcommands.
'rm' is still supported and used in the test suite. It's just not
widely advertised.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule: use argv_array instead of hand-building arrays
fetch_populated_submodules() allocates the full argv array it uses to
recurse into the submodules from the number of given options plus the six
argv values it is going to add. It then initializes it with those values
which won't change during the iteration and copies the given options into
it. Inside the loop the two argv values different for each submodule get
replaced with those currently valid.
However, this technique is brittle and error-prone (as the comment to
explain the magic number 6 indicates), so let's replace it with an
argv_array. Instead of replacing the argv values, push them to the
argv_array just before the run_command() call (including the option
separating them) and pop them from the argv_array right after that.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: use argv_array instead of hand-building arrays
Fetch invokes itself recursively when recursing into
submodules or handling "fetch --multiple". In both cases, it
builds the child's command line by pushing options onto a
statically-sized array. In both cases, the array is
currently just big enough to handle the largest possible
case. However, this technique is brittle and error-prone, so
let's replace it with a dynamic argv_array.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the array struct stores a "const char **" argv member
(for compatibility with most of our argv-taking functions),
we have to cast away the const-ness when freeing its
elements.
However, we used the wrong type when doing so. It doesn't
make a difference since free() take a void pointer anyway,
but it can be slightly confusing to a reader.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes we build a set of similar command lines, differing
only in the final arguments (e.g., "fetch --multiple"). To
use argv_array for this, you have to either push the same
set of elements repeatedly, or break the abstraction by
manually manipulating the array's internal members.
Instead, let's provide a sanctioned "pop" function to remove
elements from the end.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When fed such a commit, --format='%ci' fails to parse it, and gives
back an empty string. Update the split_ident_line() to be a bit
more lenient when parsing, but make sure the caller that wants to
pick up sane value from its return value does its own validation.
cherry-pick/revert: respect order of revisions to pick
When giving multiple individual revisions to cherry-pick or revert, as
in 'git cherry-pick A B' or 'git revert B A', one would expect them to
be picked/reverted in the order given on the command line. They are
instead ordered by their commit timestamp -- in chronological order
for "cherry-pick" and in reverse chronological order for
"revert". This matches the order in which one would usually give them
on the command line, making this bug somewhat hard to notice. Still,
it has been reported at least once before [1].
It seems like the chronological sorting happened by accident because
the revision walker has traditionally always sorted commits in reverse
chronological order when rev_info.no_walk was enabled. In the case of
'git revert B A' where B is newer than A, this sorting is a no-op. For
'git cherry-pick A B', the sorting would reverse the arguments, but
because the sequencer also flips the rev_info.reverse flag when
picking (as opposed to reverting), the end result is a chronological
order. The rev_info.reverse flag was probably flipped so that the
revision walker emits B before C in 'git cherry-pick A..C'; that it
happened to effectively undo the unexpected sorting done when not
walking, was probably a coincidence that allowed this bug to happen at
all.
Fix the bug by telling the revision walker not to sort the commits
when not walking. The only case we want to reverse the order is now
when cherry-picking and walking revisions (rev_info.no_walk = 0).
teach log --no-walk=unsorted, which avoids sorting
When 'git log' is passed the --no-walk option, no revision walk takes
place, naturally. Perhaps somewhat surprisingly, however, the provided
revisions still get sorted by commit date. So e.g 'git log --no-walk
HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result
(unless the two revisions share the commit date, in which case they
will retain the order given on the command line). As the commit that
introduced --no-walk (8e64006 (Teach revision machinery about
--no-walk, 2007-07-24)) points out, the sorting is intentional, to
allow things like
To accomodate both cases, leave the decision of whether or not to sort
up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting
to 'sorted' for backward-compatibility reasons.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally the "--quiet" option was parsed by the
diff-option parser into the internal QUICK option. This had
the effect of silencing diff output from the log (which was
not intended, but happened to work and people started to
use it). But it also had other odd side effects at the diff
level (for example, it would suppress the second commit in
"git show A B").
To fix this, commit 1c40c36 converted log to parse-options
and handled the "quiet" option separately, not passing it
on to the diff code. However, it simply ignored the option,
which was a regression for people using it as a synonym for
"-s". Commit 01771a8 then fixed that by interpreting the
option to add DIFF_FORMAT_NO_OUTPUT to the list of output
formats.
However, that commit did not fix it in all cases. It sets
the flag after setup_revisions is called. Naively, this
makes sense because you would expect the setup_revisions
parser to overwrite our output format flag if "-p" or
another output format flag is seen.
However, that is not how the NO_OUTPUT flag works. We
actually store it in the bit-field as just another format.
At the end of setup_revisions, we call diff_setup_done,
which post-processes the bitfield and clears any other
formats if we have set NO_OUTPUT. By setting the flag after
setup_revisions is done, diff_setup_done does not have a
chance to make this tweak, and we end up with other format
options still set.
As a result, the flag would have no effect in "git log -p
--quiet" or "git show --quiet". Fix it by setting the
format flag before the call to setup_revisions.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the smart-http GET requests go through the http_get_*
functions, which will prompt for credentials and retry if we
see an HTTP 401.
POST requests, however, do not go through any central point.
Moreover, it is difficult to retry in the general case; we
cannot assume the request body fits in memory or is even
seekable, and we don't know how much of it was consumed
during the attempt.
Most of the time, this is not a big deal; for both fetching
and pushing, we make a GET request before doing any POSTs,
so typically we figure out the credentials during the first
request, then reuse them during the POST. However, some
servers may allow a client to get the list of refs from
receive-pack without authentication, and then require
authentication when the client actually tries to POST the
pack.
This is not ideal, as the client may do a non-trivial amount
of work to generate the pack (e.g., delta-compressing
objects). However, for a long time it has been the
recommended example configuration in git-http-backend(1) for
setting up a repository with anonymous fetch and
authenticated push. This setup has always been broken
without putting a username into the URL. Prior to commit 986bbc0, it did work with a username in the URL, because git
would prompt for credentials before making any requests at
all. However, post-986bbc0, it is totally broken. Since it
has been advertised in the manpage for some time, we should
make sure it works.
Unfortunately, it is not as easy as simply calling post_rpc
again when it fails, due to the input issue mentioned above.
However, we can still make this specific case work by
retrying in two specific instances:
1. If the request is large (bigger than LARGE_PACKET_MAX),
we will first send a probe request with a single flush
packet. Since this request is static, we can freely
retry it.
2. If the request is small and we are not using gzip, then
we have the whole thing in-core, and we can freely
retry.
That means we will not retry in some instances, including:
1. If we are using gzip. However, we only do so when
calling git-upload-pack, so it does not apply to
pushes.
2. If we have a large request, the probe succeeds, but
then the real POST wants authentication. This is an
extremely unlikely configuration and not worth worrying
about.
While it might be nice to cover those instances, doing so
would be significantly more complex for very little
real-world gain. In the long run, we will be much better off
when curl learns to internally handle authentication as a
callback, and we can cleanly handle all cases that way.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of our http requests go through the http_request()
interface, which does some nice post-processing on the
results. In particular, it handles prompting for missing
credentials as well as approving and rejecting valid or
invalid credentials. Unfortunately, it only handles GET
requests. Making it handle POSTs would be quite complex, so
let's pull result handling code into its own function so
that it can be reused from the POST code paths.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some sites set up http access to repositories such that
fetching is anonymous and unauthenticated, but pushing is
authenticated. While there are multiple ways to do this, the
technique advertised in the git-http-backend manpage is to
block access to locations matching "/git-receive-pack$".
Let's emulate that advice in our test setup, which makes it
clear that this advice does not actually work.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not currently test authentication over smart-http at
all. In theory, it should work exactly as it does for dumb
http (which we do test). It does indeed work for these
simple tests, but this patch lays the groundwork for more
complex tests in future patches.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-httpd: recognize */smart/* repos as smart-http
We do not currently test authentication for smart-http repos
at all. Part of the infrastructure to do this is recognizing
that auth/smart is indeed a smart-http repo.
The current apache config recognizes only "^/smart/*" as
smart-http. Let's instead treat anything with /smart/ in the
URL as smart-http. This is obviously a stupid thing to do
for a real production site, but for our test suite we know
that our repositories will not have this magic string in the
name.
Note that we will route /foo/smart/bar.git directly to
git-http-backend/bar.git; in other words, everything before
the "/smart/" is irrelevant to finding the repo on disk (but
may impact apache config, for example by triggering auth
checks).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our test apache config points all of auth/ directly to the
on-disk repositories via an Alias directive. This works fine
because everything authenticated is currently in auth/dumb,
which is a subset. However, this would conflict with a
ScriptAlias for auth/smart (which will come in future
patches), so let's narrow the Alias.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t5550 script sets up a nice askpass helper for
simulating user input and checking what git prompted for.
Let's make it available to other http scripts by migrating
it to lib-httpd.
We can use this immediately in t5540 to make our tests more
robust (previously, we did not check at all that hitting the
password-protected repo actually involved a password).
Unfortunately, we end up failing the test because the
current code erroneously prompts twice (once for
git-remote-http, and then again when the former spawns
git-http-push).
More importantly, though, it will let us easily add
smart-http authentication tests in t5541 and t5551; we
currently do not test smart-http authentication at all.
As part of making it generic, let's always look for and
store auxiliary askpass files at the top-level trash
directory; this makes it compatible with t5540, which runs
some tests from sub-repositories. We can abstract away the
ugliness with a short helper function.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most of our tests, we put repos to be accessed by dumb
protocols in /dumb, and repos to be accessed by smart
protocols in /smart. In our test apache setup, the whole
/auth hierarchy requires authentication. However, we don't
bother to split it by smart and dumb here because we are not
currently testing smart-http authentication at all.
That will change in future patches, so let's be explicit
that we are interested in testing dumb access here. This
also happens to match what t5540 does for the push tests.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply: compute patch->def_name correctly under -p0
Back when "git apply" was written, we made sure that the user can
skip more than the default number of path components (i.e. 1) by
giving "-p<n>", but the logic for doing so was built around the
notion of "we skip N slashes and stop". This obviously does not
work well when running under -p0 where we do not want to skip any,
but still want to skip SP/HT that separates the pathnames of
preimage and postimage and want to reject absolute pathnames.
Stop using "stop_at_slash()", and instead introduce a new helper
"skip_tree_prefix()" with similar logic but works correctly even for
the -p0 case.
This is an ancient bug, but has been masked for a long time because
most of the patches are text and have other clues to tell us the
name of the preimage and the postimage.
* maint-1.7.11:
Prepare for 1.7.11.6
Make the ciabot scripts completely self-configuring in the normal case.
Improved documentation for the ciabot scripts.
man: git pull -r is a short for --rebase
gitcli: describe abbreviation of long options
rev-list docs: clarify --topo-order description
Documentation/CodingGuidelines: spell out more shell guidelines
Documentation: do not mention .git/refs/* directories
tests: Introduce test_seq
Merge branch 'jc/maint-abbrev-option-cli' into maint-1.7.11
We did not document that many commands take unique prefix
abbreviations of long options (e.g. "--option" may be the only flag
that the command accepts that begin with "--opt", in which case you
can give "--opt") anywhere easy to find for new people.
* jc/maint-abbrev-option-cli:
gitcli: describe abbreviation of long options
Merge branch 'jc/maint-rev-list-topo-doc' into maint-1.7.11
It was unclear what "--topo-order" was really about in the
documentation. It is not just about "children before parent", but
also about "don't mix lineages".
Merge branch 'hv/coding-guidelines' into maint-1.7.11
In earlier days, "imitate the style in the neibouring code" was
sufficient to keep the coherent style, but over time some parts of
the codebase have drifted enough to make it ineffective.
* hv/coding-guidelines:
Documentation/CodingGuidelines: spell out more shell guidelines
Our documentation used to assume having files in .git/refs/*
directories was the only to have branches and tags, but that is not
true for quite some time.
* jc/tag-doc:
Documentation: do not mention .git/refs/* directories