More permissive "git-rm --cached" behavior without -f.
In the previous behavior, "git-rm --cached" (without -f) had the same
restriction as "git-rm". This forced the user to use the -f flag in
situations which weren't actually dangerous, like:
$ git add foo # oops, I didn't want this
$ git rm --cached foo # back to initial situation
Previously, the index had to match the file *and* the HEAD. With
--cached, the index must now match the file *or* the HEAD. The behavior
without --cached is unchanged, but provides better error messages.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make show_rfc2822_date() just another date output format.
These days, show_date() takes a date_mode parameter to specify
the output format, and a separate specialized function for dates
in E-mails does not make much sense anymore.
This retires show_rfc2822_date() function and make it just
another date output format.
make git-send-email.perl handle email addresses with no names when Email::Valid is present
When using git-send-email.perl on a changeset that has: Cc: <stable@kernel.org>
in the body of the description, and the Email::Valid perl module is
installed on the system, the email address will be deemed "invalid" for
some reason (Email::Valid isn't smart enough to handle this?) and
complain and not send the address the email.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When I added the "--" case to the code scanning the arguments, I missed
the fact that since the switch statement uses -regexp, the "--" case
will match any argument containing "--", e.g. "--all". This fixes it
by taking out the -regexp (since we don't actually need regular
expression matching) and adjusting the match strings.
A side effect of this is that previously any argument starting with
"-d" would be taken to indicate date mode; now the argument has to be
exactly "-d" if you want date mode.
Add "Configuration" section to describe merge.summary
configuration variable (which is mentioned in git-fmt-merge-msg(1)
man page, but it is a plumbing command), and merge.verbosity
configuration variable (so there is a place to make reference
from "Environment Variables" section of git(7) man page) to the
git-merge(1) man page. Also describe GIT_MERGE_VERBOSITY
environment.
The configuration variable merge.verbosity and environment variable
GIT_MERGE_VERBOSITY were introduced in commit 8c3275ab, which also
documented configuration variable but not environment variable.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Improve handling of -- and ambiguous arguments
gitk: Use git log and add support for --left-right
gitk: Fix bug causing "can't read commitrow(0,n)" error
[PATCH] gitk: Fix for tree view ending in nested directories
gitk: Remove the unused stopfindproc function
gitk: Fix bug in the anc_or_desc routine
gitk: Fix the find and highlight functions
Currently the only supported value is '--no-merges' for the 'rss', 'atom',
'log', 'shortlog' and 'history' actions, but it can be easily extended to allow
other parameters for other actions.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After vainly searching the Documentation for how to follow renames, I
finally broke down and grepped the source. It would appear that Linus
didn't add write and docs for this feature when he wrote it. The
following patch rectifies that, hopefully sparing future users from
resorting to the source code.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds an option (--window-memory=N) and configuration variable
(pack.windowMemory = N) to limit the memory size of the pack-objects
delta search window. This works by removing the oldest unpacked objects
whenever the total size goes above the limit. It will always leave
at least one object, though, so as not to completely eliminate the
possibility of computing deltas.
This is an extra limit on top of the normal window size (--window=N);
the window will not dynamically grow above the fixed number of entries
specified to fill the memory limit.
With this, repacking a repository with a mix of large and small objects
is possible even with a very large window.
Cleaner and correct circular buffer handling courtesy of Nicolas Pitre.
Signed-off-by: Brian Downing <bdowning@lavos.net> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add functions for parsing integers with size suffixes
Split out the nnn{k,m,g} parsing code from git_config_int into
git_parse_long, so command-line parameters can enjoy the same
functionality. Also add get_parse_ulong for unsigned values.
Make git_config_int use git_parse_long, and add get_config_ulong
as well.
Signed-off-by: Brian Downing <bdowning@lavos.net> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support fetching the memory usage of a delta index
Delta indices, at least on 64-bit platforms, tend to be larger than
the actual uncompressed data. As such, keeping track of this storage
is important if you want to successfully limit the memory size of your
pack window.
Squirrel away the total allocation size inside the delta_index struct,
and add an accessor "sizeof_delta_index" to access it.
Signed-off-by: Brian Downing <bdowning@lavos.net> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't try to delta if target is much smaller than source
Add a new try_delta heuristic. Don't bother trying to make a delta if
the target object size is much smaller (currently 1/32) than the source,
as it's very likely not going to get a match. Even if it does, you will
have to read at least 32x the size of the new file to reassemble it,
which isn't such a good deal. This leads to a considerable performance
improvement when deltifying a mix of small and large files with a very
large window, because you don't have to wait for the large files to
percolate out of the window before things start going fast again.
Signed-off-by: Brian Downing <bdowning@lavos.net> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply delta depth bias to already deltified objects
We already apply a bias on the initial delta attempt with max_size being
a function of the base object depth. This has the effect of favoring
shallower deltas even if deeper deltas could be smaller, and therefore
creating a wider delta tree (see commits 4e8da195 and c3b06a69).
This principle should also be applied to all delta attempts for the same
object and not only the first attempt. With this the criteria for the
best delta is not only its size but also its depth, so that a shallower
delta might be selected even if it is larger than a deeper one. Even if
some deltas get larger, they allow for wider delta trees making the
depth limit less quickly reached and therefore better deltas can be
subsequently found, keeping the resulting pack size even smaller.
Runtime access to the pack should also benefit from shallower deltas.
Testing on different repositories showed slighter faster repacks,
smaller resulting packs, and a much nicer curve for delta depth
distribution with no more peak at the maximum depth level.
Improvements are even more significant with smaller depth limits.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* commit 'git-gui/master': (36 commits)
git-gui: Change prior tree SHA-1 verification to use git_read
git-gui: Include a space in Cygwin shortcut command lines
git-gui: Use sh.exe in Cygwin shortcuts
git-gui: Paper bag fix for Cygwin shortcut creation
git-gui: Improve the Windows and Mac OS X shortcut creators
git-gui: Teach console widget to use git_read
git-gui: Perform our own magic shbang detection on Windows
git-gui: Treat `git version` as `git --version`
git-gui: Assume unfound commands are known by git wrapper
git-gui: Correct gitk installation location
git-gui: Always use absolute path to all git executables
git-gui: Show a progress meter for checking out files
git-gui: Change the main window progress bar to use status_bar
git-gui: Extract blame viewer status bar into mega-widget
git-gui: Allow double-click in checkout dialog to start checkout
git-gui: Default selection to first matching ref
git-gui: Unabbreviate commit SHA-1s prior to display
git-gui: Refactor branch switch to support detached head
git-gui: Refactor our ui_status_value update technique
git-gui: Better handling of detached HEAD
...
* maint:
GIT 1.5.2.4
Teach read-tree 2-way merge to ignore intermediate symlinks
git-gui: Work around bad interaction between Tcl and cmd.exe on ^{tree}
git-gui: Don't linewrap within console windows
git-gui: Correct ls-tree buffering problem in browser
git-gui: Skip nicknames when selecting author initials
git-gui: Ensure windows shortcuts always have .bat extension
git-gui: Include a Push action on the left toolbar
git-gui: Bind M1-P to push action
git-gui: Don't bind F5/M1-R in all windows
git-gui: Unlock the index when cancelling merge dialog
git-gui: properly popup error if gitk should be started but is not installed
gitk: Improve handling of -- and ambiguous arguments
This makes gitk more consistent with git rev-list and git log in its
handling of arguments that could be either a revision or a filename;
now gitk displays an error message and quits, rather than treating it
as a revision and getting an error in the underlying git log. Now
gitk always passes "--" to git log even if no filenames are being
specified.
It also makes gitk display errors in invoking git log in a window
rather than on stderr, and makes gitk stop looking for a -d flag
when it sees a "--" argument.
Teach read-tree 2-way merge to ignore intermediate symlinks
Earlier in 16a4c61, we taught "read-tree -m -u" not to be
confused when switching from a branch that has a path frotz/filfre
to another branch that has a symlink frotz that points at xyzzy/
directory. The fix was incomplete in that it was still confused
when coming back (i.e. switching from a branch with frotz -> xyzzy/
to another branch with frotz/filfre).
This fix is rather expensive in that for a path that is created
we would need to see if any of the leading component of that
path exists as a symbolic link in the filesystem (in which case,
we know that path itself does not exist, and the fact we already
decided to check it out tells us that in the index we already
know that symbolic link is going away as there is no D/F
conflict).
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Work around bad interaction between Tcl and cmd.exe on ^{tree}
git-gui: Don't linewrap within console windows
git-gui: Correct ls-tree buffering problem in browser
git-gui: Skip nicknames when selecting author initials
git-gui: Ensure windows shortcuts always have .bat extension
git-gui: Include a Push action on the left toolbar
git-gui: Bind M1-P to push action
git-gui: Don't bind F5/M1-R in all windows
git-gui: Unlock the index when cancelling merge dialog
git-gui: properly popup error if gitk should be started but is not installed
git-gui: Work around bad interaction between Tcl and cmd.exe on ^{tree}
From Johannes Sixt <J.Sixt@eudaptics.com>:
> It seems that MSYS's wish does some quoting for Bourne shells,
> in particular, escape the first '{' of the "^{tree}" suffix, but
> then it uses cmd.exe to run "git rev-parse". However, cmd.exe does
> not remove the backslash, so that the resulting rev expression
> ends up in git's guts as unrecognizable garbage: rev-parse fails,
> and git-gui hickups in a way that it must be restarted.
Johannes originally submitted a patch to this section of commit.tcl
to use `git rev-parse $PARENT:`, but not all versions of Git will
accept that format. So I'm just taking the really simple approach
here of scanning the first line of the commit to grab its tree.
About the same cost, but works everywhere.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Function stripspace now gets a buffer instead file descriptors.
An implementation easier to call from builtins. It is designed
to be used from the upcoming builtin-tag.c and builtin-commit.c,
because both need to remove unwanted spaces from messages.
Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch --track: code cleanup and saner handling of local branches
This patch cleans up some complicated code, and replaces it with a
cleaner version, using code from remote.[ch], which got extended a
little in the process. This also enables us to fix two cases:
The earlier "fix" to setup tracking only when the original ref started
with "refs/remotes" is wrong. You are absolutely allowed to use a
separate layout for your tracking branches. The correct fix, of course,
is to set up tracking information only when there is a matching
remote.<nick>.fetch line containing a colon.
Another corner case was not handled properly. If two remotes write to
the original ref, just warn the user and do not set up tracking.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add for_each_remote() function, and extend remote_find_tracking()
The function for_each_remote() does exactly what the name
suggests.
The function remote_find_tracking() was extended to be able to
search remote refs for a given local ref. The caller sets
either src or dst (but not both) in the refspec parameter, and
remote_find_tracking() will fill in the other and return 0.
Both changes are required for the next step: simplification of
git-branch's --track functionality.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you say --cherry-pick, you do not want to see patches which are
in the upstream. If you specify paths with that, what you usually
expect is that only those parts of the patches are looked at which
actually touch the given paths.
With this patch, that expectation is met.
Noticed by Sam Vilain.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
For compatibility reasons, "git init --shared=all" does not write
"all" into the config, but a number. In the shared setup, you
really have to support even older clients on the _same_ repository.
But git_config_perm() did not pick up on it.
Also, "git update-server-info" failed to pick up on the shared
permissions.
This patch fixes both issues, and adds a test to prove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: martin f krafft <madduck@madduck.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: configurable width for the projects list Description column
This allows gitweb users to set $projects_list_description_width
in their gitweb.conf to determine how many characters of a project
description are displayed before being truncated with an ellipsis.
Signed-off-by: Michael Hendricks <michael@ndrix.org> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions for managing ref lists were named based on their use in
match_refs (for push). For fetch, they will be used for other purposes, so
rename them as a separate patch to make the future code readable.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add allocation and freeing functions for struct refs
Instead of open-coding allocation wherever it happens, have a function.
Also, add a function to free a list of refs, which we currently never
actually do.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: rebuild git.o on version change, clean up git$X flags
Commit 334d28ae factored out git.o as an intermediate stage between
git.c and git$X. However:
- It left some no-longer-relevant flags in the rule for git$X.
- It failed to replace git$X with git.o in the list of files that
record GIT_VERSION. This broke incorporation of a changed
GIT_VERSION into git$X because, when GIT_VERSION changes, git.o isn't
remade and git$X is relinked from the git.o that still contains the
old GIT_VERSION.
This patch removes the irrelevant flags and fixes incorporation of a
changed GIT_VERSION into git$X.
Signed-off-by: Matt McCutchen <hashproduct@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rerere: record resolution even if file is not in merge base
Two-file merges were rare enough that they were dropped outside of the
radar. This fix is a trivial change to builtin-rerere.c::find_conflict().
It is still sane to insist that we do not do rerere for symlinks, and
require to have stages #2 and #3, but we can drop the requirement to have
stage #1. rerere does not use information from there anyway.
This fix is from Junio, together with two tests to verify that it works
as expected.
Acked-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support wholesale directory renames in fast-import
Some source material (e.g. Subversion dump files) perform directory
renames without telling us exactly which files in that subdirectory
were moved. This makes it hard for a frontend to convert such data
formats to a fast-import stream, as all the frontend has on hand
is "Rename a/ to b/" with no details about what files are in a/,
unless the frontend also kept track of all files.
The new 'R' subcommand within a commit allows the frontend to
rename either a file or an entire subdirectory, without needing to
know the object's SHA-1 or the specific files contained within it.
The rename is performed as efficiently as possible internally,
making it cheaper than a 'D'/'M' pair for a file rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Clarify documentation of fast-import's D subcommand
The 'D' subcommand within a commit can also delete a directory
recursively. This wasn't clear in the prior version of the
documentation, leading to a question on the mailing list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we get more than 80 characters of text in a single line odds
are it is output from git-fetch or git-push and its showing a
lot of detail off to the right edge that is not so important to
the average user. We still want to make sure we show everything
we need, but we can get away with that information being off to
the side with a horizontal scrollbar.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Correct ls-tree buffering problem in browser
Our file browser was showing bad output as it did not properly buffer
a partial record when read from `ls-tree -z`. This did not show up on
my Mac OS X system as most trees are small, the pipe buffers generally
big and `ls-tree -z` was generally fast enough that all data was ready
before Tcl started to read. However on my Cygwin system one of my
production repositories had a large enough tree and packfile that it
took a couple of pipe buffers for `ls-tree -z` to complete its dump.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
gitk: Use git log and add support for --left-right
This is based on patches from Linus Torvalds and Junio Hamano, so the
ideas here are theirs.
This makes gitk use "git log -z --pretty=raw" instead of "git rev-list"
to generate the list of commits, and also makes it grok the "<" and ">"
markers that git log (and git rev-list) output with the --left-right
flag to indicate which side of a symmetric diff a commit is reachable
from. Left-side commits are drawn with a triangle pointing leftwards
instead of a circle, and right-side commits are drawn with a triangle
pointing rightwards. The commitlisted list is used to store the
left/right information as well as the information about whether each
commit is on the boundary.
In commit 66e46f37de3ed3211a8ae0e8fc09c063bc3a1e08 I changed gitk to
store ids in rowrangelist and idrowranges rather than row numbers,
but I missed two places in the layouttail procedure. This resulted
in occasional errors such as the "can't read "commitrow(0,8572)":
no such element in array" error reported by Mark Levedahl. This fixes
it by using the id rather than the row number.
[PATCH] gitk: Fix for tree view ending in nested directories
Unroll the prefix stack when assigning treeheights when leaving
proc treeview. Previously, when the ls-tree output ended in
multiple nested directories (for instance in a repository with a
single file "foo/bar/baz"), $treeheight("foo/bar/") was assigned
twice, and $treeheight("foo/") was never assigned. This led to
an error when expanding the "foo" directory in the gitk treeview.
Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
git-gui: Improve the Windows and Mac OS X shortcut creators
We now embed any GIT_* and SSH_* environment variables as well as
the path to the git wrapper executable into the Mac OS X .app file.
This should allow us to restore the environment properly when
we restart.
We also try to use proper Bourne shell single quoting when we can,
as this avoids any sort of problems that might occur due to a path
containing shell metacharacters.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that we are pretty strict about setting up own absolute paths to
any git helper (saving a marginal runtime cost to resolve the tool)
we can do the same in our console widget by making sure all console
execs go through git_read if they are a git subcommand, and if not
make sure they at least try to use the Tcl 2>@1 IO redirection if
possible, as it should be faster than |& cat.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
pack-objects: Prefer shallower deltas if the size is equal
Change "try_delta" so that if it finds a delta that has the same size
but shallower depth than the existing delta, it will prefer the
shallower one. This makes certain delta trees vastly less deep.
Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: Perform our own magic shbang detection on Windows
If we cannot locate a .exe for a git tool that we want to run than
it may just be a Bourne shell script as these are popular in Git.
In such a case the first line of the file will say "#!/bin/sh" so
a UNIX kernel knows what program to start to parse and run that.
But Windows doesn't support shbang lines, and neither does the Tcl
that comes with Cygwin.
We can pass control off to the git wrapper as that is a real Cygwin
program and can therefore start the Bourne shell script, but that is
at least two fork+exec calls to get the program running. One to do
the fork+exec of the git wrapper and another to start the Bourne shell
script. If the program is run multiple times it is rather expensive
as the magic shbang detection won't be cached across executions.
On MinGW/MSYS we don't have the luxury of such magic detection. The
MSYS team has taught some of this magic to the git wrapper, but again
its slower than it needs to be as the git wrapper must still go and
run the Bourne shell after it is called.
We now attempt to guess the shbang line on Windows by reading the
first line of the file and building our own command line path from
it. Currently we support Bourne shell (sh), Perl and Python. That
is the entire set of shbang lines that appear in git.git today.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We know that the version subcommand of git is special. It does not
currently have an executable link installed into $gitexecdir and we
therefore would never match it with one of our file exists tests.
So we forward any invocations to it directly to the git wrapper, as
it is a builtin within that executable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
revision.c: remove duplicated parents after history simplification
When we simplify history due to path limits, the parents list
for a rewritten commit can end up having duplicates. Instead of
filtering them out in the output codepath like earlier commit 88494423 did, remove them much earlier, when the parent
information actually gets rewritten.
git-gui: Assume unfound commands are known by git wrapper
If we cannot locate a command in $gitexecdir on our own then it may
just be because we are supposed to run it by `git $name` rather than
by `git-$name`. Many commands are now builtins, more are likely to
go in that direction, and we may see the hardlinks in $gitexecdir go
away in future versions of git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The master Makefile in git.git installs gitk into bindir, not
gitexecdir, which means gitk is located as a sibling of the git
wrapper and not as though it were a git helper tool.
We can also avoid some Tcl concat operations by letting eval do
all of the heavy lifting; we have two proper Tcl lists ($cmd and
$revs) that we are joining together and $revs is currently never
an empty list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Always use absolute path to all git executables
Rather than making the C library search for git every time we want
to execute it we now search for the main git wrapper at startup, do
symlink resolution, and then always use the absolute path that we
found to execute the binary later on. This should save us some
cycles, especially on stat challenged systems like Cygwin/Win32.
While I was working on this change I also converted all of our
existing pipes ([open "| git ..."]) to use two new pipe wrapper
functions. These functions take additional options like --nice
and --stderr which instructs Tcl to take special action, like
running the underlying git program through `nice` (if available)
or redirect stderr to stdout for capture in Tcl.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Show a progress meter for checking out files
Sometimes switching between branches can take more than a second or
two, in which case `git checkout` would normally have shown a small
progress meter to the user on the terminal to let them know that we
are in fact working, and give them a reasonable idea of when we may
finish.
We now do obtain that progress meter from read-tree -v and include
it in our main window's status bar. This allows users to see how
many files we have checked out, how many remain, and what percentage
of the operation is completed. It should help to keep users from
getting bored during a large checkout operation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Change the main window progress bar to use status_bar
Now that we have a fancy status bar mega-widget we can reuse that
within our main window. This opens the door for implementating
future improvements like a progress bar.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Extract blame viewer status bar into mega-widget
Our blame viewer has had a very fancy progress bar at the bottom of
the window that shows the current status of the blame engine, which
includes the number of lines completed as both a text and a graphical
meter. I want to reuse this meter system in other places, such as
during a branch switch where read-tree -v can give us a progress
meter for any long-running operation.
This change extracts the code and refactors it as a widget that we
can take advantage of in locations other than in the blame viewer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Allow double-click in checkout dialog to start checkout
If the user double clicks a branch in the checkout dialog then they
probably want to start the checkout process on that branch. I found
myself doing this without realizing it, and of course it did nothing
as there was no action bound to the listbox's Double-Button-1 event
handler. Since I did it without thinking, others will probably also
try, and expect the same behavior.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we have specifications listed in our revision picker mega-widget
then we should default the selection within that widget to the first
ref available. This way the user does not need to use the spacebar
to activate the selection of a ref within the box; instead they can
navigate up/down with the arrow keys and be done with it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Unabbreviate commit SHA-1s prior to display
If the end-user feeds us an abbreviated SHA-1 on the command line for
`git gui browser` or `git gui blame` we now unabbreviate the value
through `git rev-parse` so that the title section of the blame or
browser window shows the user the complete SHA-1 as Git determined
it to be.
If the abbreviated value was ambiguous we now complain with the
standard error message(s) as reported by git-rev-parse --verify,
so that the user can understand what might be wrong and correct
their command line.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Refactor branch switch to support detached head
This is a major rewrite of the way we perform switching between
branches and the subsequent update of the working directory. Like
core Git we now use a single code path to perform all changes: our
new checkout_op class. We also use it for branch creation/update
as it integrates the tracking branch fetch process along with a
very basic merge (fast-forward and reset only currently).
Because some users have literally hundreds of local branches we
use the standard revision picker (with its branch filtering tool)
to select the local branch, rather than keeping all of the local
branches in the Branch menu. The branch menu listing out all of
the available branches is simply not sane for those types of huge
repositories.
Users can now checkout a detached head by ticking off the option
in the checkout dialog. This option is off by default for the
obvious reason, but it can be easily enabled for any local branch
by simply checking it. We also detach the head if any non local
branch was selected, or if a revision expression was entered.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
user-manual: fix directory name in git-archive example
user-manual: more explanation of push and pull usage
tutorial: Fix typo
user-manual: grammar and style fixes
It seems that not everybody expects a difference between keeping a "pick"
line, and deleting it. So be a bit more explicit about that, with all
capitals to get the attention.
Noticed by vmiklos on IRC.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: remember the settings of -v, -s and -p when interrupted
After interruption, be that an edit, or a conflicting commit, reset
the variables VERBOSE, STRATEGY and PRESERVE_MERGES, so that the
user does not have to respecify them with "rebase --continue".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: actually show the diffstat when being verbose
The "while" loop in the function do_rest is not supposed to ever be
exited. Instead, the function do_one checks if there is nothing left,
and cleans up and exits if that is the case. So the diffstat code
belongs there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: handle --continue more like non-interactive rebase
Non-interactive rebase requires the working tree to be clean, but
applies what is in the index without requiring the user to do it
herself. Imitate that, but (since we are interactive, after all)
fire up an editor with the commit message.
It also fixes a subtle bug: a forgotten "continue" was removed, which
led to an infinite loop when continuing without remaining patches.
Both issues noticed by Frank Lichtenheld.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7004: Skip tests for signed tags in an old version of gpg.
As said here: http://www.gnupg.org/documentation/faqs.html#q6.19
the gpg version 1.0.6 didn't parse trust packets correctly, so for
that version, creation of signed tags using the generated key fails.
Signed-off-by: Carlos Rica <jasampler@gmail.com> Acked-by: Sven Verdoolaege <skimo@kotnet.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix merge-one-file for our-side-added/our-side-removed cases
When commit ed93b449 changed the script so that it does not
touch untracked working tree file, we forgot that we still
needed to resolve the index entry (otherwise they are left
unmerged).
branch.autosetupmerge: allow boolean values, or "all"
Junio noticed that switching on autosetupmerge unilaterally started
cluttering the config for local branches. That is not the original
intention of branch.autosetupmerge, which was meant purely for
convenience when branching off of remote branches, but that semantics
got lost somewhere.
If you still want that "new" behavior, you can switch
branch.autosetupmerge to the value "all". Otherwise, it is interpreted
as a boolean, which triggers setting up defaults _only_ when branching
off of a remote branch, i.e. the originally intended behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-stash: try reusing cached stat info as much as possible
Earlier when we read a tree into a temporary index, we read it
from scratch. Start from the current index and use read-tree -m
to preserve cached stat information as much as possible, in
order to speed up "git add -u". This makes "git stash" usable
in a source tree of nontrivial size.
I'm really starting to dislike global variables. The ui_status_value
global varible is just one of those that seems to appear in a lot of
code and in many cases we didn't even declare it "global" within the
proc that updates it so we haven't always been getting all of the
updates we expected to see.
This change introduces two new global procs:
ui_status $msg; # Sets the status bar to show $msg.
ui_ready; # Changes the status bar to show "Ready."
The second (special) form is used because we often update the area
with this message once we are done processing a block of work and
want the user to know we have completed it.
I'm not fixing the cases that appear in lib/branch.tcl right now
as I'm actually in the middle of a huge refactoring of that code
to support making a detached HEAD checkout.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the current branch is not a symbolic-ref that points to a
name in the refs/heads/ namespace we now just assume that the
head is a detached head. In this case we return the special
branch name of HEAD rather than empty string, as HEAD is a
valid revision specification and the empty string is not.
I have also slightly improved the current-branch function by
using string functions to parse the symbolic-ref data. This
should be slightly faster than using a regsub. I think the
code is clearer too.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Automatically refresh tracking branches when needed
If the user is creating a new local branch and has selected to use
a tracking branch as the starting revision they probably want to
make sure they are using the absolute latest version available of
that branch.
We now offer a checkbox "Fetch Tracking Branch" (on by default)
that instructs git-gui to run git-fetch on just that one branch
before resolving the branch name into a commit SHA-1 and making
(or updating) the local branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Option to default new branches to match tracking branches
In some workflows users will want to almost always just create a new
local branch that matches a remote branch. In this type of workflow
it is handy to have the new branch dialog default to "Match Tracking
Branch" and "Starting Revision"-Tracking Branch", with the focus in
the branch filter field. This can save users working on this type
of workflow at least two mouse clicks every time they create a new
local branch or switch to one with a fast-forward.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>