* tr/maint-no-index-fixes:
diff --no-index -q: fix endless loop
diff --no-index: test for pager after option parsing
diff: accept -- when using --no-index
* am/maint-push-doc:
Documentation: avoid using undefined parameters
Documentation: mention branches rather than heads
Documentation: remove a redundant elaboration
Documentation: git push repository can also be a remote
Cloning an empty repository manually (that is, doing 'git init' and
then doing all configuration by hand) can be a lot of work. Save the
user this work by allowing the cloning of empty repositories.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git-describe says the default abbreviation is 8
hexadecimal digits while cache.c clearly shows DEFAULT_ABBREV set to 7.
This patch corrects the documentation.
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ea27a18 (spawn pager via run_command interface), the
original git process actually does git work, and the pager
is a child process (actually, on Windows it has always been
that way, since Windows lacks fork). After spawning the
pager, we register an atexit() handler that waits for the
pager to finish.
Unfortunately, that handler does not always run. In
particular, if git is killed by a signal, then we exit
immediately. The calling shell then thinks that git is done;
however, the pager is still trying to run and impact the
terminal. The result can be seen by running a long git
process with a pager (e.g., "git log -p") and hitting ^C.
Depending on your config, you should see the shell prompt,
but pressing a key causes the pager to do any terminal
de-initialization sequence.
This patch just intercepts any death-dealing signals and
waits for the pager before dying. Under typical less
configuration, that means hitting ^C will cause git to stop
generating output, but the pager will keep running.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code is very inconsistent about which signals
are caught for doing cleanup of temporary files and lock
files. Some callsites checked only SIGINT, while others
checked a variety of death-dealing signals.
This patch factors out those signals to a single function,
and then calls it everywhere. For some sites, that means
this is a simple clean up. For others, it is an improvement
in that they will now properly clean themselves up after a
larger variety of signals.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a piece of code wanted to do some cleanup before exiting
(e.g., cleaning up a lockfile or a tempfile), our usual
strategy was to install a signal handler that did something
like this:
do_cleanup(); /* actual work */
signal(signo, SIG_DFL); /* restore previous behavior */
raise(signo); /* deliver signal, killing ourselves */
For a single handler, this works fine. However, if we want
to clean up two _different_ things, we run into a problem.
The most recently installed handler will run, but when it
removes itself as a handler, it doesn't put back the first
handler.
This patch introduces sigchain, a tiny library for handling
a stack of signal handlers. You sigchain_push each handler,
and use sigchain_pop to restore whoever was before you in
the stack.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two pieces of code that create tempfiles for diff:
run_external_diff and run_textconv. The former cleans up its
tempfiles in the face of premature death (i.e., by die() or
by signal), but the latter does not. After this patch, they
will both use the same cleanup routines.
To make clear what the change is, let me first explain what
happens now:
- run_external_diff uses a static global array of 2
diff_tempfile structs (since it knows it will always
need exactly 2 tempfiles). It calls prepare_temp_file
(which doesn't know anything about the global array) on
each of the structs, creating the tempfiles that need to
be cleaned up. It then registers atexit and signal
handlers to look through the global array and remove the
tempfiles. If it succeeds, it calls the handler manually
(which marks the tempfile structs as unused).
- textconv has its own tempfile struct, which it allocates
using prepare_temp_file and cleans up manually. No
signal or atexit handlers.
The new code moves the installation of cleanup handlers into
the prepare_temp_file function. Which means that that
function now has to understand that there is static tempfile
storage. So what happens now is:
- run_external_diff calls prepare_temp_file
- prepare_temp_file calls claim_diff_tempfile, which
allocates an unused slot from our global array
- prepare_temp_file installs (if they have not already
been installed) atexit and signal handlers for cleanup
- prepare_temp_file sets up the tempfile as usual
- prepare_temp_file returns a pointer to the allocated
tempfile
The advantage being that run_external_diff no longer has to
care about setting up cleanup handlers. Now by virtue of
calling prepare_temp_file, run_textconv gets the same
benefit, as will any future users of prepare_temp_file.
There are also a few side benefits to the specific
implementation:
- we now install cleanup handlers _before_ allocating the
tempfile, closing a race which could leave temp cruft
- when allocating a slot in the global array, we will now
detect a situation where the old slots were not properly
vacated (i.e., somebody forgot to call remove upon
leaving the function). In the old code, such a situation
would silently overwrite the tempfile names, meaning we
would forget to clean them up. The new code dies with a
bug warning.
- we make sure only to install the signal handler once.
This isn't a big deal, since we are just overwriting the
old handler, but will become an issue when a later patch
converts the code to use sigchain
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had defined some SIG_FOO macros that appear in the code, but that are
not supported on Windows, in order to make the code compile. But a
subsequent change will assert that a signal number is non-zero. We now
use the signal numbers that are commonly used on POSIX systems.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* am/maint-push-doc:
Documentation: avoid using undefined parameters
Documentation: mention branches rather than heads
Documentation: remove a redundant elaboration
Documentation: git push repository can also be a remote
* sb/hook-cleanup:
run_hook(): allow more than 9 hook arguments
run_hook(): check the executability of the hook before filling argv
api-run-command.txt: talk about run_hook()
Move run_hook() from builtin-commit.c into run-command.c (libgit)
checkout: don't crash on file checkout before running post-checkout hook
bash completion: add 'rename' subcommand to git-remote
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diff is invoked with --color-words (w/o =regex), use the regular
expression the user has configured as diff.wordregex.
diff drivers configured via attributes take precedence over the
diff.wordregex-words setting. If the user wants to change them, they have
their own configuration variables.
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify parsing branch switching events in reflog
We only accept "checkout: moving from A to B" newer style reflog entries,
in order to pick up A. There is no point computing where B begins at
after running strstr to locate " to ", nor adding 4 and then subtracting 4
from the same pointer.
tutorial-2: Update with the new "git commit" ouput
An earlier commit c5ee71f (commit: more compact summary and without extra
quotes, 2009-01-19) changed the "git commit" output when creating a
commit. This patch updates the example session in the tutorial to match
the new output.
Signed-off-by: Santi Béjar <santi@agolina.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename detection: Avoid repeated filespec population
In diffcore_rename, we assume that the blob contents in the filespec
aren't required anymore after estimate_similarity has been called and thus
we free it. But estimate_similarity might return early when the file sizes
differ too much. In that case, cnt_data is never set and the next call to
estimate_similarity will populate the filespec again, eventually rereading
the same blob over and over again.
To fix that, we first get the blob sizes and only when the blob contents
are actually required, and when cnt_data will be set, the full filespec is
populated, once.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to be cached, configure variables need to contain the
string '_cv_', and they should begin with a package-specific
prefix in order to avoid interfering with third-party macros.
Rename ld_dashr, ld_wl_rpath, ld_rpath to git_cv_ld_dashr etc.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: use shell for-loop rather than Make's foreach loop during install
The install target uses a foreach loop to generate a single long shell
command line to handle installation of the built-in git commands. The
maximum length of the argument list varies by platform, and this use of
foreach quickly grows the length of the argument list. Current git can
exceed the default maximum argument list length on IRIX 6.5 of 20480
depending on the installation path.
Rather than using make's foreach loop to pre-generate the shell command
line, use a shell for-loop and allow the shell to iterate through each of
the built-in commands.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
use uppercase POSIX compliant signals for the 'trap' command
In 'man 1p trap' there is written:
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So change the lowercase signals to uppercase, which is POSIX compliant
instead of being an extension.
There wasn't anybody claiming that it doesn't work, but there was a bug
with using a signal with the SIG prefix, which is an extension as well.
So let's play it safe and change it, since it doesn't hurt anyone.
While at it, also convert 8 indentation spaces to 1 tab character.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/difftool: remove distracting 'echo' in the SIGINT handler
When interrupting git-difftool with Ctrl-C, the output of this echo
command led to having the cursor at the beginning of the line below the
shell prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/difftool: change trap condition from SIGINT to INT
git-difftool worked for me on an up-to-date Gentoo Linux at home, but
didn't work on a somewhat older Ubuntu Linux 7.10 at work and failed
with the following error, where 'Makefile' was locally modified:
trap: 244: SIGINT: bad trap
external diff died, stopping at Makefile.
In 'man 1p trap' there is written:
"The condition can be EXIT, 0 (equivalent to EXIT), or a signal
specified using a symbolic name, without the SIG prefix, [...]"
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So now we do it the POSIX compliant way instead of using an extension.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: more compact summary and without extra quotes
Update the report format again to save the screen real estates, while
avoiding from enclosing the one-line summary of the commit log inside
double quotes pair, which looks awkward when the message begins or ends
with a double quote. The old format looked like this:
This can be used to scan only the last few kilobytes of a reflog, as a
cheap optimization when the data you are looking for is likely to be
found near the end of it. The caller is expected to fall back to the
full scan if that is not the case.
Commit 5ef8d77a implemented color_parse_mem, a function for
parsing colors from a non-NUL-terminated string, by simply
allocating a new NUL-terminated string and calling
color_parse. This had a small but measurable speed impact on
a user format that used the advanced color parsing. E.g.,
# uses quick parsing
$ time ./git log --pretty=tformat:'%Credfoo%Creset' >/dev/null
real 0m0.673s
user 0m0.652s
sys 0m0.016s
# uses color_parse_mem
$ time ./git log --pretty=tformat:'%C(red)foo%C(reset)' >/dev/null
real 0m0.692s
user 0m0.660s
sys 0m0.032s
This patch implements color_parse_mem as the primary
function, with color_parse as a wrapper for strings. This
gives comparable timings to the first case above.
Original patch by René. Commit message and debugging by Jeff
King.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test more combinations of ignore-whitespace options to diff
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
To do that, Git no longer looks forward for the '@{' corresponding to the
closing '}' but backward, and dwim_ref() as well as dwim_log() learnt
about the @{-<N>} notation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
interpret_nth_last_branch(): avoid traversing the reflog twice
You can have quite a many reflog entries, but you typically won't recall
which branch you were on after switching branches for more than several
times.
Instead of reading the reflog twice, this reads the branch switching event
and keeps as many entries as the user asked from the latest such entries,
which is the minimum required to be able to switch back to the branch we
were recently on.
difftool: put the cursor on the editable file for Vim
You only need to edit worktree files when comparing against
the worktree. Put the cursor automatically into its window for
vimdiff and gvimdiff to avoid doing <C-w>l every time.
Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes the difftool docs always refer to the
git-difftool script using the dashed form of the name.
Only command examples use the non-dashed form now.
Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: Show UUID in svn info for added directories with svn 1.5.5
In svn 1.5.5 the output of "svn info" for added directories was changed
and now shows the repository UUID. This patch implements the same
behavior for "git svn info" and makes t9119-git-svn-info.17 pass if
svn 1.5.5 is used.
Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de> Acked-by: Eric Wong <normalperson@yhbt.net>
The $FIRSTLINE variable is from the user's commit and can contain
arbitrary backslash escapes that may be (mis)interpreted when given to
"echo", depending on the implementation. Use "printf" to work around the
issue.
Some SVN repositories contain git repositories within them
(hopefully accidentally checked in). Since git refuses to track
nested ".git" repositories, this can be a problem when fetching
updates from SVN.
Thanks to Morgan Christiansson for the report and testing.
The get_log() function in the Perl SVN API introduced the limit
parameter in 1.2.0. However, this got discarded in our SVN::Ra
compatibility layer when used with SVN 1.1.x. We now emulate
the limit functionality in older SVN versions by preventing the
original callback from being called if the given limit has been
reached. This emulation is less bandwidth efficient, but SVN
1.1.x is becoming rarer now.
Additionally, the --limit parameter in svn(1) uses the
aforementioned get_log() functionality change in SVN 1.2.x.
t9129 no longer depends on --limit to work and instead uses
Perl to parse out the commit message.
By default git-svn stores timestamps of fetched commits in
Subversion's UTC format. Passing --localtime to fetch will convert
them to the timezone of the server on which git-svn is run.
This makes the timestamps of a resulting "git log" agree with what
"svn log" shows for the same repository.
Signed-off-by: Pete Harlan <pgit@pcharlan.com> Acked-by: Eric Wong <normalperson@yhbt.net>
Since broken SVN clients can commit svn:special files without
the magic "link " prefix, this can affect delta application
when we update the broken svn:special file. So now we fall
back and retry the delta application on symlinks if having
a "link " prefix fails.
Our behavior differs from svn(1) (v1.5.1) slightly:
When a svn:special file is created w/o a "link " prefix, svn
will create a regular file (mode 100644 to git) with the
contents of the blob as-is.
Our behavior is to continue creating the symlink (mode 120000
to git) with the contents of the blob as-is. While this
differs from current svn(1) behavior, this is easier and more
efficient to implement (and the correctness of the svn(1) is
debatable, since it's a workaround for a bug in the first
place).
More information on this SVN bug is described here:
http://subversion.tigris.org/issues/show_bug.cgi?id=2692
git-svn: handle empty files marked as symlinks in SVN
Broken SVN clients generate empty files with the svn:special set
to '*'. This attempts to denote a symlink pointing to a file
with an empty path (""), which cannot be generated on a POSIX
system.
Thus, we mimic the behavior of svn(1) and create a zero-byte
file in our tree.
The "matching refs" semantics works only on matching branches these days.
Instead of using "heads" which traditionally has been used more or less
interchangeably with "refs", say "branch" explicitly here.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
lstat_cache(): introduce invalidate_lstat_cache() function
In some cases it could maybe be necessary to say to the cache that
"Hey, I deleted/changed the type of this pathname and if you currently
have it inside your cache, you should deleted it".
This patch introduce a function which support this.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
lstat_cache(): introduce has_dirs_only_path() function
The create_directories() function in entry.c currently calls stat()
or lstat() for each path component of the pathname 'path' each and every
time. For the 'git checkout' command, this function is called on each
file for which we must do an update (ce->ce_flags & CE_UPDATE), so we get
lots and lots of calls.
To fix this, we make a new wrapper to the lstat_cache() function, and
call the wrapper function instead of the calls to the stat() or the
lstat() functions. Since the paths given to the create_directories()
function, is sorted alphabetically, the new wrapper would be very
cache effective in this situation.
To support it we must update the lstat_cache() function to be able to
say that "please test the complete length of 'name'", and also to give
it the length of a prefix, where the cache should use the stat()
function instead of the lstat() function to test each path component.
Thanks to Junio C Hamano, Linus Torvalds and Rene Scharfe for valuable
comments to this patch!
Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
lstat_cache(): introduce has_symlink_or_noent_leading_path() function
In some cases, especially inside the unpack-trees.c file, and inside
the verify_absent() function, we can avoid some unnecessary calls to
lstat(), if the lstat_cache() function can also be told to keep track
of non-existing directories.
So we update the lstat_cache() function to handle this new fact,
introduce a new wrapper function, and the result is that we save lots
of lstat() calls for a removed directory which previously contained
lots of files, when we call this new wrapper of lstat_cache() instead
of the old one.
We do similar changes inside the unlink_entry() function, since if we
can already say that the leading directory component of a pathname
does not exist, it is not necessary to try to remove a pathname below
it!
Thanks to Junio C Hamano, Linus Torvalds and Rene Scharfe for valuable
comments to this patch!
Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
lstat_cache(): more cache effective symlink/directory detection
Make the cache functionality more effective. Previously when A/B/C/D
was in the cache and A/B/C/E/file.c was called for, there was no match
at all from the cache. Now we use the fact that the paths "A", "A/B"
and "A/B/C" are already tested, and we only need to do an lstat() call
on "A/B/C/E".
We only cache/store the last path regardless of its type. Since the
cache functionality is always used with alphabetically sorted names
(at least it seems so for me), there is no need to store both the last
symlink-leading path and the last real-directory path. Note that if
the cache is not called with (mostly) alphabetically sorted names,
neither the old, nor this new one, would be very effective.
Previously, when symlink A/B/C/S was cached/stored in the symlink-
leading path, and A/B/C/file.c was called for, it was not easy to use
the fact that we already knew that the paths "A", "A/B" and "A/B/C"
are real directories.
Avoid copying the first path components of the name 2 zillion times
when we test new path components. Since we always cache/store the
last path, we can copy each component as we test those directly into
the cache. Previously we ended up doing a memcpy() for the full
path/name right before each lstat() call, and when updating the cache
for each time we have tested a new path component.
We also use less memory, that is, PATH_MAX bytes less memory on the
stack and PATH_MAX bytes less memory on the heap.
Thanks to Junio C Hamano, Linus Torvalds and Rene Scharfe for valuable
comments to this patch!
Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mergetool: put the cursor on the editable file for Vim
When resolving conflicts, you only need to edit the $MERGED file. Put
the cursor automatically into its window for vimdiff and gvimdiff to
avoid doing <C-w>l every time.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Tested-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7700: demonstrate misbehavior of 'repack -a' when local packs exist
The ability to "...fatten [the] local repository by packing everything that
is needed by the local ref into a single new pack, including things that are
borrowed from alternates"[1] is supposed to be provided by the '-a' or '-A'
options to repack when '-l' is not used, but there is a flaw. For each
pack in the local repository without a .keep file, repack supplies a
--unpacked=<pack> argument to pack-objects.
The --unpacked option to pack-objects, with or without an argument, causes
pack-objects to ignore any object which is packed in a pack not mentioned
in an argument to --unpacked=. So, if there are local packs, and
'repack -a' is called, then any objects which reside in packs accessible
through alternates will _not_ be packed. If there are no local packs, then
no --unpacked argument will be supplied, and repack will behave as expected.
test more combinations of ignore-whitespace options to diff
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/rebase-root:
rebase: update documentation for --root
rebase -i: learn to rebase root commit
rebase: learn to rebase root commit
rebase -i: execute hook only after argument checking
* tr/maint-no-index-fixes:
diff --no-index -q: fix endless loop
diff --no-index: test for pager after option parsing
diff: accept -- when using --no-index
* maint:
Update draft release notes for 1.6.1.1
builtin-fsck: fix off by one head count
t5540: clarify that http-push does not handle packed-refs on the remote
http-push: when making directories, have a trailing slash in the path name
http-push: fix off-by-path_len
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
bundle: allow the same ref to be given more than once
"git bundle create x master master" used to create a bundle that lists
the same branch (master) twice. Cloning from such a bundle resulted in
a needless warning "warning: Duplicated ref: refs/remotes/origin/master".
* maint-1.6.0:
builtin-fsck: fix off by one head count
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
According to the man page, if "git fsck" is passed one or more heads, it
should verify connectivity and validity of only objects reachable from the
heads it is passed.
However, since 5ac0a20 (Make builtin-fsck.c use parse_options.,
2007-10-15) the command behaved as if no heads were passed, when given
only one argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When HEAD is detached, --all should list it, too, logically, as a
detached HEAD is by definition a temporary, unnamed branch.
It is especially necessary to list it when garbage collecting, as
the detached HEAD would be trashed.
Noticed by Thomas Rast.
Note that this affects creating bundles with --all; I contend that it
is a good change to add the HEAD, so that cloning from such a bundle
will give you a current branch. However, I had to fix t5701 as it
assumed that --all does not imply HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current working directory is a subdirectory of the gitdir (e.g.
<repo>/.git/refs/), then setup_git_directory_gently() will climb its
parent directories until it finds itself in a gitdir. However, no
matter how many parent directories it climbs, it sets
'GIT_DIR_ENVIRONMENT' to ".", which is obviously wrong.
This behaviour affected at least 'git rev-parse --git-dir' and hence
caused some errors in bash completion (e.g. customized command prompt
when on a detached head and completion of refs).
To fix this, we set the absolute path of the found gitdir instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-am fails it's not always easy to see which patch failed,
since it's often hidden by a lot of error messages.
Add an extra line which prints the name of the failed patch just
before the resolve message to make it easier to find.
Signed-off-by: Jonas Flodén <jonas@floden.nu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib: add 'git difftool' for launching common merge tools
'git difftool' is a git command that allows you to compare and edit files
between revisions using common merge tools. 'git difftool' does what
'git mergetool' does but its use is for non-merge situations such as
when preparing commits or comparing changes against the index.
It uses the same configuration variables as 'git mergetool' and
provides the same command-line interface as 'git diff'.
Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>