gitweb.git
shortlog: remove range checkRené Scharfe Tue, 28 Nov 2006 21:49:17 +0000 (22:49 +0100)

shortlog: remove range check

Don't force the user to specify more than one revision parameter,
thus making git-shortlog behave more like git-log.
'git-shortlog master' will now produce the expected results; the
other end of the range simply is the (oldest) root commit.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-svn: update tests for recent changesEric Wong Tue, 28 Nov 2006 05:46:50 +0000 (21:46 -0800)

git-svn: update tests for recent changes

* Enable test for delta transfers in full-svn-test.

* Run tests against the root of the repository so we won't have
to revisit 308906fa6e98132cab839a4f42701386fba368ef and
efe4631def181d32f932672a7ea31e52ee0ab308 again.
The graft-branches test still runs as before.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-svn: enable delta transfers during fetches when... Eric Wong Tue, 28 Nov 2006 05:44:48 +0000 (21:44 -0800)

git-svn: enable delta transfers during fetches when using SVN:: libs

This should drastically reduce bandwidth used for network
transfers. This is not enabled for file:// repositories by
default because of the increased CPU usage and I/O needed.

GIT_SVN_DELTA_FETCH may be set to a true value to enable or
false (0) to disable delta transfers regardless of the
repository type.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

sha1_object_info(): be consistent with read_sha1_file()Johannes Schindelin Mon, 27 Nov 2006 23:18:55 +0000 (00:18 +0100)

sha1_object_info(): be consistent with read_sha1_file()

We used to try loose objects first with sha1_object_info(), but packed
objects first with read_sha1_file(). Now, prefer packed objects over loose
ones with sha1_object_info(), too.

Usually the old behaviour would pose no problem, but when you tried to fix
a fscked up repository by inserting a known-good pack,

git cat-file $(git cat-file -t <sha1>) <sha1>

could fail, even when

git cat-file blob <sha1>

would _not_ fail. Worse, a repack would fail, too.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

shortlog: use pagerJohannes Schindelin Mon, 27 Nov 2006 23:29:21 +0000 (00:29 +0100)

shortlog: use pager

On request of the kingpenguin, shortlog now uses the pager if output
goes to a tty.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

cvsimport: style fixup.Junio C Hamano Mon, 27 Nov 2006 22:21:30 +0000 (14:21 -0800)

cvsimport: style fixup.

This should not change any functionality, but just makes it readable by
having a space between syntactic construct keyword and open parenthesis
(e.g. "if (expr", not "if(expr") and between close parenthesis and open
brace (e.g. "if (expr) {" not "if (expr){").

Signed-off-by: Junio C Hamano <junkio@cox.net>

git-svn: use ~/.subversion config files when using... Eric Wong Mon, 27 Nov 2006 21:20:53 +0000 (13:20 -0800)

git-svn: use ~/.subversion config files when using SVN:: libraries

This allows users to use HTTP proxy information (among other settings)
from ~/.subversion/servers and ~/.subversion/config

--config-dir (as before) may be passed to git-svn to override the
default choice of '~/.subversion' for the configuration directory.

Thanks to tko on #git for pointing this out.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Teach bash about git-am/git-apply and their whitespace... Shawn O. Pearce Mon, 27 Nov 2006 20:12:03 +0000 (15:12 -0500)

Teach bash about git-am/git-apply and their whitespace options.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Cache the list of merge strategies and available comman... Shawn O. Pearce Mon, 27 Nov 2006 20:11:52 +0000 (15:11 -0500)

Cache the list of merge strategies and available commands during load.

Since the user's git installation is not likely to grow a new command
or merge strategy in the lifespan of the current shell process we can
save time during completion operations by caching these lists during
sourcing of the completion support.

If the git executable is not available or we run into errors while
caching at load time then we defer these to runtime and generate
the list on the fly. This might happen if the user doesn't put git
into their PATH until after the completion script gets sourced.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Support --strategy=x completion in addition to --strate... Shawn O. Pearce Mon, 27 Nov 2006 20:10:42 +0000 (15:10 -0500)

Support --strategy=x completion in addition to --strategy x.

Because git-merge and git-rebase both accept -s, --strategy or --strategy=
we should recognize all three formats in the bash completion functions and
issue back all merge strategies on demand.

I also moved the prior word testing to be before the current word testing,
as the current word cannot be completed with -- if the prior word was an
option which requires a parameter, such as -s or --strategy.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Teach bash about git-repo-config.Shawn O. Pearce Mon, 27 Nov 2006 09:44:47 +0000 (04:44 -0500)

Teach bash about git-repo-config.

This is a really ugly completion script for git-repo-config, but it has
some nice properties. I've added all of the documented configuration
parameters from Documentation/config.txt to the script, allowing the
user to complete any standard configuration parameter name.

We also have some intelligence for the remote.*.* and branch.*.* keys
by completing not only the key name (e.g. remote.origin) but also the
values (e.g. remote.*.fetch completes to the branches available on the
corresponding remote).

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Support bash completion of refs/remote.Shawn O. Pearce Mon, 27 Nov 2006 08:42:32 +0000 (03:42 -0500)

Support bash completion of refs/remote.

Now that people are really likely to start using separate remotes
(due to the default in git-clone changing) we should support ref
completion for these refs in as many commands as possible.

While we are working on this routine we should use for-each-ref
to obtain a list of local refs, as this should run faster than
peek-remote as it does not need to dereference tag objects in
order to produce the list of refs back to us. It should also
be more friendly to users of StGIT as we won't generate a list
of the StGIT metadata refs.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Teach bash about git log/show/whatchanged options.Shawn O. Pearce Mon, 27 Nov 2006 08:42:18 +0000 (03:42 -0500)

Teach bash about git log/show/whatchanged options.

Typing out options to git log/show/whatchanged can take a while, but
we can easily complete them with bash. So list the most common ones,
especially --pretty=online|short|medium|... so that users don't need
to type everything out.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Teach bash how to complete git-rebase.Shawn O. Pearce Mon, 27 Nov 2006 08:42:07 +0000 (03:42 -0500)

Teach bash how to complete git-rebase.

As git-rebase is a popular command bash should know how to complete
reference names and its long options. We only support completions
which make sense given the current state of the repository, that
way users don't get shown --continue/--skip/--abort on the first
execution.

Also added support for long option --strategy to git-merge, as I
missed that option earlier and just noticed it while implementing
git-rebase.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Teach bash how to complete git-cherry-pick.Shawn O. Pearce Mon, 27 Nov 2006 08:41:59 +0000 (03:41 -0500)

Teach bash how to complete git-cherry-pick.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Teach bash how to complete git-format-patch.Shawn O. Pearce Mon, 27 Nov 2006 08:41:43 +0000 (03:41 -0500)

Teach bash how to complete git-format-patch.

Provide completion for currently known long options supported by
git-format-patch as well as the revision list specification argument,
which is generally either a refname or in the form a..b.

Since _git_log was the only code that knew how to complete a..b, but
we want to start adding option support to _git_log also refactor the
a..b completion logic out into its own function.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Add current branch in PS1 support to git-completion... Shawn O. Pearce Mon, 27 Nov 2006 08:41:28 +0000 (03:41 -0500)

Add current branch in PS1 support to git-completion.bash.

Many users want to display the current branch name of the current git
repository as part of their PS1 prompt, much as their PS1 prompt might
also display the current working directory name.

We don't force our own PS1 onto the user. Instead we let them craft
their own PS1 string and offer them the function __git_ps1 which they
can invoke to obtain either "" (when not in a git repository) or
"(%s)" where %s is the name of the current branch, as read from HEAD,
with the leading refs/heads/ removed.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Teach bash how to complete options for git-name-rev.Shawn O. Pearce Mon, 27 Nov 2006 08:41:12 +0000 (03:41 -0500)

Teach bash how to complete options for git-name-rev.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Hide plumbing/transport commands from bash completion.Shawn O. Pearce Mon, 27 Nov 2006 08:41:01 +0000 (03:41 -0500)

Hide plumbing/transport commands from bash completion.

Users generally are not going to need to invoke plumbing-level commands
from within one line shell commands. If they are invoking these commands
then it is likely that they are glueing them together into a shell script
to perform an action, in which case bash completion for these commands is
of relatively little use.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Teach git-completion.bash how to complete git-merge.Shawn O. Pearce Mon, 27 Nov 2006 08:40:47 +0000 (03:40 -0500)

Teach git-completion.bash how to complete git-merge.

Now that git-merge is high-level Porcelain users are going to expect
to be able to use it from the command line, in which case we really
should also be able to complete ref names as parameters.

I'm also including completion support for the merge strategies
that are supported by git-merge.sh, should the user wish to use a
different strategy than their default.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Update documentation to remove incorrect GIT_DIFF_OPTS... Sean Mon, 27 Nov 2006 19:37:43 +0000 (14:37 -0500)

Update documentation to remove incorrect GIT_DIFF_OPTS example.

Git no longer calls an external diff program to generate patches.
Remove the documentation which suggests that you can pass
arbitrary diff options via the GIT_DIFF_OPTS environment variable.

Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Merge branch 'js/shortlog'Junio C Hamano Mon, 27 Nov 2006 06:51:38 +0000 (22:51 -0800)

Merge branch 'js/shortlog'

* js/shortlog:
git-shortlog: make common repository prefix configurable with .mailmap
git-shortlog: fix common repository prefix abbreviation.
builtin git-shortlog is broken
shortlog: fix "-n"
shortlog: handle email addresses case-insensitively
shortlog: read mailmap from ./.mailmap again
shortlog: do not crash on parsing "[PATCH"
Build in shortlog

Merge branch 'jc/push-delete-ref'Junio C Hamano Mon, 27 Nov 2006 06:51:17 +0000 (22:51 -0800)

Merge branch 'jc/push-delete-ref'

* jc/push-delete-ref:
Allow git push to delete remote ref.

Merge branch 'jc/merge'Junio C Hamano Mon, 27 Nov 2006 06:19:56 +0000 (22:19 -0800)

Merge branch 'jc/merge'

* branch 'jc/merge':
git-merge: do not leak rev-parse output used for checking internally.
git-merge: tighten error checking.
merge: allow merging into a yet-to-be-born branch.
git-merge: make it usable as the first class UI
remove merge-recursive-old

git-merge: do not leak rev-parse output used for checki... Junio C Hamano Mon, 27 Nov 2006 06:19:42 +0000 (22:19 -0800)

git-merge: do not leak rev-parse output used for checking internally.

Signed-off-by: Junio C Hamano <junkio@cox.net>

git-merge: tighten error checking.Junio C Hamano Mon, 27 Nov 2006 06:16:31 +0000 (22:16 -0800)

git-merge: tighten error checking.

If a branch name to be merged is misspelled, the command leaked error
messages from underlying plumbing commands, which were helpful only
to people who know how the command are implemented to diagnose the
breakage, but simply puzzling and unhelpful for the end users.

Signed-off-by: Junio C Hamano <junkio@cox.net>

Merge branch 'jc/pack-peeled'Junio C Hamano Mon, 27 Nov 2006 06:09:41 +0000 (22:09 -0800)

Merge branch 'jc/pack-peeled'

* jc/pack-peeled:
Store peeled refs in packed-refs (take 2).
Store peeled refs in packed-refs file.

grep: do not skip unmerged entries when grepping in... Junio C Hamano Sun, 26 Nov 2006 20:47:52 +0000 (12:47 -0800)

grep: do not skip unmerged entries when grepping in the working tree.

We used to skip unmerged entries, which made sense for grepping
in the cached copies, but not for grepping in the working tree.

Noticed by Johannes Sixt.

Signed-off-by: Junio C Hamano <junkio@cox.net>

git-tag: allow empty tag message if -m is given explicitly.Han-Wen Nienhuys Sun, 26 Nov 2006 16:42:49 +0000 (17:42 +0100)

git-tag: allow empty tag message if -m is given explicitly.

Signed-off-by: Han-Wen Nienhuys <hanwen@xs4all.nl>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Merge branch 'jn/web'Junio C Hamano Sun, 26 Nov 2006 06:54:45 +0000 (22:54 -0800)

Merge branch 'jn/web'

* jn/web:
gitweb: Make project description in projects list link to summary view
gitweb: Use author_epoch for pubdate in gitweb feeds
gitweb: Add author and contributor email to Atom feed
gitweb: Add author and committer email extraction to parse_commit
gitweb: Use git-show-ref instead of git-peek-remote
gitweb: Do not use esc_html in esc_path

Documentation: clarify tutorial pull/merge discussionJ. Bruce Fields Sun, 26 Nov 2006 03:45:02 +0000 (22:45 -0500)

Documentation: clarify tutorial pull/merge discussion

Attempt to clarify somewhat the difference between pull and merge,
and give a little more details on the pull syntax.

I'm still not happy with this section: the explanation of the origin
branch isn't great, but maybe that should be left alone pending the
use-separate-remotes change; and we need to explain how to set up a
public repository and push to it.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Make project description in projects list link... Jakub Narebski Sun, 26 Nov 2006 01:18:26 +0000 (02:18 +0100)

gitweb: Make project description in projects list link to summary view

Make (shortened) project description in the "projects list" view
hyperlink to the "summary" view of the project. Project names are
sometimes short; having project description be hyperling gives larger
are to click. While at it, display full description on mouseover via
'title' attribute to introduced link.

Additionally, fix whitespace usage in modified git_project_list_body
subroutine: tabs are for indent, spaces are for align.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-svn: allow SVN:: lib users to track the root of... Eric Wong Sun, 26 Nov 2006 01:38:41 +0000 (17:38 -0800)

git-svn: allow SVN:: lib users to track the root of the repository (again)

I broke this again in 747fa12cef73b6ca04fffaddaad7326cf546cdea.

Thanks to merlyn for pointing this out to me on IRC.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Use author_epoch for pubdate in gitweb feedsJakub Narebski Sat, 25 Nov 2006 14:54:34 +0000 (15:54 +0100)

gitweb: Use author_epoch for pubdate in gitweb feeds

Use creation date (author_epoch) instead of former commit date
(committer_epoch) as publish date in gitweb feeds (RSS, Atom).

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Add author and contributor email to Atom feedJakub Narebski Sat, 25 Nov 2006 14:54:33 +0000 (15:54 +0100)

gitweb: Add author and contributor email to Atom feed

Add author email (from 'author_email') and contributor email (from
'committer_email') to items in the Atom format gitweb feed.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Add author and committer email extraction to... Jakub Narebski Sat, 25 Nov 2006 14:54:32 +0000 (15:54 +0100)

gitweb: Add author and committer email extraction to parse_commit

Extract author email to 'author_email' key, and comitter mail to
'committer_mail' key; uniquify committer and author lines handling
by the way.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Use git-show-ref instead of git-peek-remoteJakub Narebski Sat, 25 Nov 2006 10:32:08 +0000 (11:32 +0100)

gitweb: Use git-show-ref instead of git-peek-remote

Use "git show-ref --dereference" instead of "git peek-remote
$projectroot/project" in git_get_references. git-show-ref is faster
than git-peek-remote (40ms vs 56ms user+sys for git.git repository);
even faster is reading info/refs file (if it exists), but the
information in info/refs can be stale; that and the fact that
info/refs is meant for dumb protocol transports, not for gitweb.

git-show-ref is available since v1.4.4; the output format is slightly
different than git-peek-remote output format, but we accept both.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Do not use esc_html in esc_pathJakub Narebski Sat, 25 Nov 2006 08:43:59 +0000 (09:43 +0100)

gitweb: Do not use esc_html in esc_path

Do not use esc_html in esc_path subroutine to avoid double quoting;
expand esc_html body (except quoting) in esc_path.

Move esc_path before quot_cec and quot_upr. Add some comments.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-fetch: exit with non-zero status when fast-forward... Junio C Hamano Sat, 25 Nov 2006 09:04:28 +0000 (01:04 -0800)

git-fetch: exit with non-zero status when fast-forward check fails

When update_local_ref() refuses to update a branch head due to
fast-forward check, it was not propagated properly in the call
chain and the command did not exit with non-zero status as a
result.

Signed-off-by: Junio C Hamano <junkio@cox.net>

git-shortlog: make common repository prefix configurabl... Junio C Hamano Sat, 25 Nov 2006 08:07:54 +0000 (00:07 -0800)

git-shortlog: make common repository prefix configurable with .mailmap

The code had "/pub/scm/linux/kernel/git/" hardcoded which was
too specific to the kernel project.

With this, a line in the .mailmap file:

# repo-abbrev: /pub/scm/linux/kernel/git/

can be used to cause the substring to be abbreviated to /.../
on the title line of the commit message.

Signed-off-by: Junio C Hamano <junkio@cox.net>

git-shortlog: fix common repository prefix abbreviation.Junio C Hamano Sat, 25 Nov 2006 08:01:27 +0000 (00:01 -0800)

git-shortlog: fix common repository prefix abbreviation.

The code to abbreviate the common repository prefix was totally
borked.

Signed-off-by: Junio C Hamano <junkio@cox.net>

git-svn: exit with status 1 for test failuresEric Wong Sat, 25 Nov 2006 06:38:18 +0000 (22:38 -0800)

git-svn: exit with status 1 for test failures

Some versions of the SVN libraries cause die() to exit with 255,
and 40cf043389ef4cdf3e56e7c4268d6f302e387fa0 tightened up
test_expect_failure to reject return values >128.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-svn: correctly access repos when only given partial... Eric Wong Sat, 25 Nov 2006 06:38:17 +0000 (22:38 -0800)

git-svn: correctly access repos when only given partial read permissions

Sometimes users are given only read access to a subtree inside a
repository, and git-svn could not read log information (and thus
fetch commits) when connecting a session to the root of the
repository. We now start an SVN::Ra session with the full URL
of what we're tracking, and not the repository root as before.

This change was made much easier with a cleanup of
repo_path_split() usage as well as improving the accounting of
authentication batons.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-branch -D: make it work even when on a yet-to-be... Junio C Hamano Sat, 25 Nov 2006 07:10:23 +0000 (23:10 -0800)

git-branch -D: make it work even when on a yet-to-be-born branch

This makes "git branch -D other_branch" work even when HEAD
points at a yet-to-be-born branch.

Earlier, we checked the HEAD ref for the purpose of "subset"
check even when the deletion was forced (i.e. not -d but -D).
Because of this, you cannot delete a branch even with -D while
on a yet-to-be-born branch.

With this change, the following sequence that now works:

mkdir newdir && cd newdir
git init-db
git fetch -k $other_repo refs/heads/master:refs/heads/othre
# oops, typo
git branch other othre
git branch -D othre

Signed-off-by: Junio C Hamano <junkio@cox.net>

Add -v and --abbrev options to git-branchLars Hjemli Fri, 24 Nov 2006 13:45:10 +0000 (14:45 +0100)

Add -v and --abbrev options to git-branch

The new -v option makes git-branch show the abbreviated sha1 + subjectline
for each branch.

Additionally, minimum abbreviation length can be specified with
--abbrev=<length>

Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-clone: stop dumb protocol from copying refs outside... Junio C Hamano Sat, 25 Nov 2006 03:07:24 +0000 (19:07 -0800)

git-clone: stop dumb protocol from copying refs outside heads/ and tags/.

Most notably, the original code first copied refs/remotes/ that
remote side had to local, and overwrote them by mapping refs/heads/
from the remote when a dumb protocol transport was used.

This makes the clone behaviour by dumb protocol in line with the
git native and rsync transports.

Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: (style) use chomp without parentheses consistently.Junio C Hamano Fri, 24 Nov 2006 22:04:01 +0000 (14:04 -0800)

gitweb: (style) use chomp without parentheses consistently.

It seems that gitweb tries to consistently use chomp without parentheses
around its operands, but there were two places that said "chomp($var);".

Let's be consistent.

Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Replace SPC with &nbsp; also in tag commentJakub Narebski Fri, 24 Nov 2006 21:25:50 +0000 (22:25 +0100)

gitweb: Replace SPC with &nbsp; also in tag comment

Commit messages had SPC replaced with &nbsp; entity;
make it so also in tag message (tag comment).

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Allow git push to delete remote ref.Junio C Hamano Fri, 24 Nov 2006 08:26:49 +0000 (00:26 -0800)

Allow git push to delete remote ref.

This allows you to say

git send-pack $URL :refs/heads/$branch

to delete the named remote branch. The refspec $src:$dst means
replace the destination ref with the object known as $src on the
local side, so this is a natural extension to make an empty $src
mean "No object" to delete the target.

Signed-off-by: Junio C Hamano <junkio@cox.net>

Merge branch 'jn/web'Junio C Hamano Fri, 24 Nov 2006 11:54:57 +0000 (03:54 -0800)

Merge branch 'jn/web'

* jn/web:
gitweb: Finish restoring "blob" links in git_difftree_body
gitweb: Refactor feed generation, make output prettier, add Atom feed
gitweb: Add an option to href() to return full URL
gitweb: New improved formatting of chunk header in diff
gitweb: Default to $hash_base or HEAD for $hash in "commit" and "commitdiff"
gitweb: Buffer diff header to deal with split patches + git_patchset_body refactoring
gitweb: Protect against possible warning in git_commitdiff

Merge branch 'pb/diffroot'Junio C Hamano Fri, 24 Nov 2006 11:49:57 +0000 (03:49 -0800)

Merge branch 'pb/diffroot'

* pb/diffroot:
config option log.showroot to show the diff of root commits

Merge branch 'jc/pack-heuristics'Junio C Hamano Fri, 24 Nov 2006 11:46:44 +0000 (03:46 -0800)

Merge branch 'jc/pack-heuristics'

* jc/pack-heuristics:
pack-objects: tweak "do not even attempt delta" heuristics

Merge branch 'jc/numstat'Junio C Hamano Fri, 24 Nov 2006 11:46:40 +0000 (03:46 -0800)

Merge branch 'jc/numstat'

* jc/numstat:
apply --numstat: mark binary diffstat with - -, not 0 0

Merge branch 'ap/branch-ref-display'Junio C Hamano Fri, 24 Nov 2006 11:43:46 +0000 (03:43 -0800)

Merge branch 'ap/branch-ref-display'

* ap/branch-ref-display:
Add support to git-branch to show local and remote branches

Merge branch 'ap/prune'Junio C Hamano Fri, 24 Nov 2006 11:42:36 +0000 (03:42 -0800)

Merge branch 'ap/prune'

* ap/prune:
Typefix builtin-prune.c::prune_object()
Improve git-prune -n output

Typefix builtin-prune.c::prune_object()Junio C Hamano Fri, 24 Nov 2006 10:54:37 +0000 (02:54 -0800)

Typefix builtin-prune.c::prune_object()

It passed (const char*) to a function that took a (char *); the
buffer itself was of course writable, so pass the buffer itself.

Signed-off-by: Junio C Hamano <junkio@cox.net>

config option log.showroot to show the diff of root... Peter Baumann Thu, 23 Nov 2006 09:36:33 +0000 (10:36 +0100)

config option log.showroot to show the diff of root commits

This allows one to see a root commit as a diff in commands like git-log,
git-show and git-whatchanged.

Signed-off-by: Peter Baumann <Peter.B.Baumannn@stud.informatik.uni-erlangen.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Merge branch 'jc/upload-pack'Junio C Hamano Fri, 24 Nov 2006 10:34:27 +0000 (02:34 -0800)

Merge branch 'jc/upload-pack'

* jc/upload-pack:
upload-pack: stop the other side when they have more roots than we do.

git-svn: handle authentication without relying on cache... Eric Wong Fri, 24 Nov 2006 09:38:04 +0000 (01:38 -0800)

git-svn: handle authentication without relying on cached tokens on disk

This is mostly gleaned off SVN::Mirror, with added support for
--no-auth-cache and --config-dir.

Even with this patch, git-svn does not yet support repositories
where the user only has partial read permissions.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-cvsimport: add support for CVS pserver method HTTP... Iñaki Arenaza Wed, 22 Nov 2006 22:26:57 +0000 (23:26 +0100)

git-cvsimport: add support for CVS pserver method HTTP/1.x proxying

This patch adds support for 'proxy' and 'proxyport' connection options
when using the pserver method for the CVS Root.

It has been tested with a Squid 2.5.x proxy server.

Quoting from the CVS info manual:

The `gserver' and `pserver' connection methods all accept optional
method options, specified as part of the METHOD string, like so:

:METHOD[;OPTION=ARG...]:

Currently, the only two valid connection options are `proxy', which
takes a hostname as an argument, and `proxyport', which takes a port
number as an argument. These options can be used to connect via an HTTP
tunnel style web proxy. For example, to connect pserver via a web proxy
at www.myproxy.net and port 8000, you would use a method of:

:pserver;proxy=www.myproxy.net;proxyport=8000:

*NOTE: The rest of the connection string is required to connect to
the server as noted in the upcoming sections on password authentication,
gserver and kserver. The example above would only modify the METHOD
portion of the repository name.*

PROXY must be supplied to connect to a CVS server via a proxy
server, but PROXYPORT will default to port 8080 if not supplied.
PROXYPORT may also be set via the CVS_PROXY_PORT environment variable.

Signed-off-by: Iñaki Arenaza <iarenuno@eteo.mondragon.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Make git-clone --use-separate-remote the defaultPetr Baudis Thu, 23 Nov 2006 22:58:35 +0000 (23:58 +0100)

Make git-clone --use-separate-remote the default

We've talked about this for quite some time on the list, and it
is a sane thing to do for a repository with an associcated
working tree.

For somebody who wants to use the traditional layout, there is a
backward compatibility option --use-immingled-remote, but it is
expected to be removed before the next major release.

Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>

refs outside refs/{heads,tags} match less strongly.Junio C Hamano Fri, 24 Nov 2006 05:52:18 +0000 (21:52 -0800)

refs outside refs/{heads,tags} match less strongly.

This changes the refname matching logic used to decide which ref
is updated with git-send-pack. We used to error out when
pushing 'master' when the other end has both 'master' branch and
a tracking branch 'remotes/$name/master' but with this, 'master'
matches only 'refs/heads/master' when both and no other 'master'
exist.

Pushing 'foo' when both heads/foo and tags/foo exist at the
remote end is still considered an error and you would need to
disambiguate between them by being more explicit.

When neither heads/foo nor tags/foo exists at the remote,
pushing 'foo' when there is only remotes/origin/foo is not
ambiguous, while it still is ambiguous when there are more than
one such weaker match (remotes/origin/foo and remotes/alt/foo,
for example).

Signed-off-by: Junio C Hamano <junkio@cox.net>

Increase length of function name bufferAndy Parkins Thu, 23 Nov 2006 10:05:17 +0000 (10:05 +0000)

Increase length of function name buffer

In xemit.c:xdl_emit_diff() a buffer for showing the function name as
commentary is allocated; this buffer was 40 characters. This is a bit
small; particularly for C++ function names where there is often an
identical prefix (like void LongNamespace::LongClassName) on multiple
functions, which makes the context the same everywhere. In other words
the context is useless. This patch increases that buffer to 80
characters - which may still not be enough, but is better

Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-svn: preserve uncommitted changes after dcommitEric Wong Thu, 23 Nov 2006 22:54:05 +0000 (14:54 -0800)

git-svn: preserve uncommitted changes after dcommit

Using dcommit could cause the user to lose uncommitted changes
during the reset --hard operation, so change it to reset --mixed.

If dcommit chooses the rebase path, then git-rebase will already
error out when local changes are made.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-svn: correctly handle revision 0 in SVN repositoriesEric Wong Thu, 23 Nov 2006 22:54:04 +0000 (14:54 -0800)

git-svn: correctly handle revision 0 in SVN repositories

some SVN repositories have a revision 0 (committed by no author
and no date) when created; so when we need to ensure that we
check any revision variables are defined, and not just
non-zero.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-svn: error out from dcommit on a parent-less commitEric Wong Thu, 23 Nov 2006 22:54:03 +0000 (14:54 -0800)

git-svn: error out from dcommit on a parent-less commit

dcommit would unconditionally append "~1" to a commit in order
to generate a diff. Now we generate a meaningful error message
if we try to generate an impossible diff.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

archive-zip: don't use sizeof(struct ...)René Scharfe Thu, 23 Nov 2006 22:02:37 +0000 (23:02 +0100)

archive-zip: don't use sizeof(struct ...)

We can't rely on sizeof(struct zip_*) returning the sum of
all struct members. At least on ARM padding is added at the
end, as Gerrit Pape reported. This fixes the problem but
still lets the compiler do the summing by introducing
explicit padding at the end of the structs and then taking
its offset as the combined size of the preceding members.

As Junio correctly notes, the _end[] marker array's size
must be greater than zero for compatibility with compilers
other than gcc. The space wasted by the markers can safely
be neglected because we only have one instance of each
struct, i.e. in sum 3 wasted bytes on i386, and 0 on ARM. :)

We still rely on the compiler to not add padding between the
struct members, but that's reasonable given that all of them
are unsigned char arrays.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>

GIT 1.4.4.1 v1.4.4.1Junio C Hamano Thu, 23 Nov 2006 00:57:34 +0000 (16:57 -0800)

GIT 1.4.4.1

Signed-off-by: Junio C Hamano <junkio@cox.net>

trust-executable-bit: fix breakage for symlinksJunio C Hamano Thu, 23 Nov 2006 00:33:32 +0000 (16:33 -0800)

trust-executable-bit: fix breakage for symlinks

An earlier commit f28b34a broke symlinks when trust-executable-bit
is not set because it incorrectly assumed that everything was a
regular file.

Reported by Juergen Ruehle.

Signed-off-by: Junio C Hamano <junkio@cox.net>

Move --pretty options into Documentation/pretty-formats.txtChris Riddoch Tue, 21 Nov 2006 23:49:15 +0000 (16:49 -0700)

Move --pretty options into Documentation/pretty-formats.txt

Asciidoc-include it into the manuals for programs that use the
--pretty command-line option, for consistency among the docs.

This describes all the pretty-formats currently listed in the cmit_fmt
enum in commit.h, and also briefly describes the presence and format
of the 'Merge: ' line in some pretty formats.

There's a hedge that limiting your view of history can affect what
goes in the Merge: line, and that --abbrev/--no-abbrev do nothing to
the 'raw' format.

Signed-off-by: Chris Riddoch <chris@syntacticsugar.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Store peeled refs in packed-refs (take 2).Junio C Hamano Wed, 22 Nov 2006 07:36:35 +0000 (23:36 -0800)

Store peeled refs in packed-refs (take 2).

This fixes the previous implementation which failed to optimize
repositories with tons of lightweight tags. The updated
packed-refs format begins with "# packed-refs with:" line that
lists the kind of extended data the file records. Currently,
there is only one such extension defined, "peeled". This stores
the "peeled tag" on a line that immediately follows a line for a
tag object itself in the format "^<sha-1>".

The header line itself and any extended data are ignored by
older implementation, so packed-refs file generated with this
version can still be used by older git. packed-refs made by
older git can of course be used with this version.

Signed-off-by: Junio C Hamano <junkio@cox.net>

Add support to git-branch to show local and remote... Andy Parkins Tue, 21 Nov 2006 19:31:24 +0000 (19:31 +0000)

Add support to git-branch to show local and remote branches

Instead of storing a list of refnames in append_ref, a list of
structures is created. Each of these stores the refname and a
symbolic constant representing its type.

The creation of the list is filtered based on a command line
switch; no switch means "local branches only", "-r" means "remote
branches only" (as they always did); but now "-a" means "local
branches or remote branches".

As a side effect, the list is now not global, but allocated in
print_ref_list() where it used.

Also a memory leak is plugged, the memory allocated during the
list creation was never freed.

It lays a groundwork to also display tags, but the command being
'git branch' it is not currently used.

Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

merge: allow merging into a yet-to-be-born branch.Junio C Hamano Wed, 22 Nov 2006 05:13:28 +0000 (21:13 -0800)

merge: allow merging into a yet-to-be-born branch.

Signed-off-by: Junio C Hamano <junkio@cox.net>

git-merge: make it usable as the first class UIJunio C Hamano Mon, 20 Nov 2006 09:06:09 +0000 (01:06 -0800)

git-merge: make it usable as the first class UI

This teaches the oft-requested syntax

git merge $commit

to implement merging the named commit to the current branch.
This hopefully would make "git merge" usable as the first class
UI instead of being a mere backend for "git pull".

Most notably, $commit above can be any committish, so you can
say for example:

git merge js/shortlog~2

to merge early part of a topic branch without merging the rest
of it.

A custom merge message can be given with the new --message=<msg>
parameter. The message is prepended in front of the usual
"Merge ..." message autogenerated with fmt-merge-message.

Signed-off-by: Junio C Hamano <junkio@cox.net>

remove merge-recursive-oldJunio C Hamano Mon, 20 Nov 2006 08:49:31 +0000 (00:49 -0800)

remove merge-recursive-old

This frees the Porcelain-ish that comes with the core Python-free.

Signed-off-by: Junio C Hamano <junkio@cox.net>

Improve git-prune -n outputAndy Parkins Thu, 2 Nov 2006 11:12:26 +0000 (12:12 +0100)

Improve git-prune -n output

prune_object() in show_only mode would previously just show the path to the
object that would be deleted. The path the object is stored in shouldn't be
shown to users, they only know about sha1 identifiers so show that instead.

Further, the sha1 alone isn't that useful for examining what is going to be
deleted. This patch also adds the object type to the output, which makes it
easy to pick out, say, the commits and use git-show to display them.

Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Doc: Make comment about merging in tutorial.txt more... Paolo Ciarrocchi Mon, 20 Nov 2006 20:29:41 +0000 (21:29 +0100)

Doc: Make comment about merging in tutorial.txt more clear

Rephrased a sentence in order to make more clear the concept of
pull . branch

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

archive: use setvbuf() instead of setlinebuf()Michal Rokos Tue, 21 Nov 2006 22:19:28 +0000 (23:19 +0100)

archive: use setvbuf() instead of setlinebuf()

This tiny patch makes GIT compile again on HP-UX 11i.

[jc: The setlinebuf() is described as unportable to BSD before
4.2; it's not even in POSIX, while setvbuf() is in ISO C.]

Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Finish restoring "blob" links in git_difftree_bodyJakub Narebski Sun, 19 Nov 2006 21:51:39 +0000 (22:51 +0100)

gitweb: Finish restoring "blob" links in git_difftree_body

This finishes work started by commit 4777b0141a4812177390da4b6ebc9d40ac3da4b5
"gitweb: Restore object-named links in item lists"
by Petr Baudis. It brings back rest of "blob" links in difftree-raw
like part of "commit" and "commitdiff" views, namely in
git_difftree_body subroutine.

Now the td.link table cell has the following links:
* link to diff ("blobdiff" view) in "commit" view, if applicable
(there is no link to uninteresting creation/deletion diff), or
link to patch anchor in "commitdiff" view.
* link to current version of file ("blob" view), with the obvious
exception of file deletion, where it is link to the parent
version.
* link to "blame" view, if it is enabled, and file was not just
created (i.e. it has any history).
* link to history of the file ("history" view), again with sole
exception of the case of new file.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Refactor feed generation, make output prettier... Jakub Narebski Sun, 19 Nov 2006 14:05:22 +0000 (15:05 +0100)

gitweb: Refactor feed generation, make output prettier, add Atom feed

Add support for more modern Atom web feed format. Both RSS and Atom
feeds are generated by git_feed subroutine to avoid code duplication;
git_rss and git_atom are thin wrappers around git_feed. Add links to
Atom feed in HTML header and in page footer (but not in OPML; we
should use APP, Atom Publishing Proptocol instead).

Allow for feed generation for branches other than current (HEAD)
branch, and for generation of feeds for file or directory history.

Do not use "pre ${\sub_returning_scalar(...)} post" trick, but join
strings instead: "pre " . sub_returning_scalar(...) . " post".
Use href(-full=>1, ...) instead of hand-crafting gitweb urls.

Make output prettier:
* Use title similar to the title of web page
* Use project description (if exists) for description/subtitle
* Do not add anything (committer name, commit date) to feed entry title
* Wrap the commit message in <pre>
* Make file names into an unordered list
* Add links (diff, conditional blame, history) to the file list.

In addition to the above points, the attached patch emits a
Last-Changed: HTTP response header field, and doesn't compute the feed
body if the HTTP request type was HEAD. This helps keep the web server
load down for well-behaved feed readers that check if the feed needs
updating.

If browser (feed reader) sent Accept: header, and it prefers 'text/xml' type
to 'application/rss+xml' (in the case of RSS feed) or 'application/atom+xml'
(in the case of Atom feed), then use 'text/xml' as content type.

Both RSS and Atom feeds validate at http://feedvalidator.org
and at http://validator.w3.org/feed/

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Andreas Fuchs <asf@boinkor.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Add an option to href() to return full URLJakub Narebski Sun, 19 Nov 2006 14:05:21 +0000 (15:05 +0100)

gitweb: Add an option to href() to return full URL

href subroutine by default generates absolute URL (generated using
CGI::url(-absolute=>1), and saved in $my_uri) using $my_uri as base;
add an option to generate full URL using $my_url as base.

New feature usage: href(..., -full=>1)

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: New improved formatting of chunk header in... Jakub Narebski Sat, 18 Nov 2006 22:35:40 +0000 (23:35 +0100)

gitweb: New improved formatting of chunk header in diff

If we have provided enough info, and diff is not combined diff,
and if provided diff line is chunk header, then:
* split chunk header into .chunk_info and .section span elements,
first containing proper chunk header, second section heading
(aka. which function), for separate styling: the proper chunk
header is on non-white background, section heading part uses
slightly lighter color.
* hyperlink from-file-range to starting line of from-file, if file
was not created.
* hyperlink to-file-range to starting line of to-file, if file
was not deleted.
Links are of invisible variety (and "list" class).

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Default to $hash_base or HEAD for $hash in... Jakub Narebski Sat, 18 Nov 2006 22:35:41 +0000 (23:35 +0100)

gitweb: Default to $hash_base or HEAD for $hash in "commit" and "commitdiff"

Set $hash parameter to $hash_base || "HEAD" if it is not set (if it is
not true to be more exact). This allows [hand-edited] URLs with 'action'
"commit" or "commitdiff" but without 'hash' parameter.

If there is 'h' (hash) parameter provided, then gitweb tries
to use this. HEAD is used _only_ if nether hash, nor hash_base
are provided, i.e. for URL like below
URL?p=project.git;a=commit
i.e. without neither 'h' nor 'hb'.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Buffer diff header to deal with split patches... Jakub Narebski Sat, 18 Nov 2006 22:35:39 +0000 (23:35 +0100)

gitweb: Buffer diff header to deal with split patches + git_patchset_body refactoring

There are some cases when one line from "raw" git-diff output (raw format)
corresponds to more than one patch in the patchset git-diff output. To deal
with this buffer git diff header and extended diff header (everything up to
actual patch) to check from information from "index <hash>..<hash>" extended
header line if the patch corresponds to the same or next difftree raw line.

This could also be used to gather information needed for hyperlinking, and
used for printing gitweb quoted filenames, from extended diff header instead
of raw git-diff output.

While at it, refactor git_patchset_body subroutine from the event-driven,
AWK-like state-machine parsing to sequential parsing: for each patch
parse (and output) git diff header, parse extended diff header, parse two-line
from-file/to-file diff header, parse patch itself; patch ends with the end
of input [file] or the line matching m/^diff /.

For better understanding the code, there were added assertions in the
comments a la Carp::Assert module. Just in case there is commented out code
dealing with unexpected end of input (should not happen, hence commented
out).

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

gitweb: Protect against possible warning in git_commitdiffJakub Narebski Sat, 18 Nov 2006 22:35:38 +0000 (23:35 +0100)

gitweb: Protect against possible warning in git_commitdiff

We may read an undef from <$fd> and unconditionally chomping it
would result in a warning.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

builtin git-shortlog is brokenNicolas Pitre Tue, 21 Nov 2006 20:49:45 +0000 (15:49 -0500)

builtin git-shortlog is broken

Another small patch to fix the output result to be conform with the
perl version.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

shortlog: fix "-n"Johannes Schindelin Tue, 21 Nov 2006 20:12:06 +0000 (21:12 +0100)

shortlog: fix "-n"

Since it is now a builtin optionally taking a range, we have to parse
the options before the rev machinery, to be able to shadow the short
hand "-n" for "--max-count".

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Teach SubmittingPatches about git-commit -sPaolo Ciarrocchi Tue, 21 Nov 2006 18:55:20 +0000 (19:55 +0100)

Teach SubmittingPatches about git-commit -s

As discussed on git mailing list let's teach the reader about
the possiblity to have automatically signed off the commit running
the git-commit -s command

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

shortlog: handle email addresses case-insensitivelyJohannes Schindelin Sun, 19 Nov 2006 16:29:14 +0000 (17:29 +0100)

shortlog: handle email addresses case-insensitively

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

shortlog: read mailmap from ./.mailmap againJohannes Schindelin Sun, 19 Nov 2006 16:28:51 +0000 (17:28 +0100)

shortlog: read mailmap from ./.mailmap again

While at it, remove the linux specific mailmap into
contrib/mailmap.linux.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

shortlog: do not crash on parsing "[PATCH"Johannes Schindelin Sun, 19 Nov 2006 16:28:25 +0000 (17:28 +0100)

shortlog: do not crash on parsing "[PATCH"

Annoyingly, it looked for the closing bracket in the author name
instead of in the message, and then accessed the NULL pointer.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Build in shortlogJohannes Schindelin Sun, 22 Oct 2006 11:23:31 +0000 (13:23 +0200)

Build in shortlog

[jc: with minimum squelching of compiler warning under "-pedantic"
compilation options.]

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Store peeled refs in packed-refs file.Junio C Hamano Sun, 19 Nov 2006 21:22:44 +0000 (13:22 -0800)

Store peeled refs in packed-refs file.

This would speed up "show-ref -d" in a repository with mostly
packed tags.

Signed-off-by: Junio C Hamano <junkio@cox.net>

do_for_each_ref: perform the same sanity check for... Junio C Hamano Sun, 19 Nov 2006 06:13:33 +0000 (22:13 -0800)

do_for_each_ref: perform the same sanity check for leftovers.

An earlier commit b37a562a added a check to see if the ref
points at a valid object (as a part of 'negative ref' support
which we currently do not use), but did so only while iterating
over both packed and loose refs, and forgot to apply the same
check while iterating over the remaining ones.

We might want to replace the "if null then omit it" check with
"eh --- what business does a 0{40} value have here?" complaint
later since we currently do not use negative refs, but that is
a separate issue.

Signed-off-by: Junio C Hamano <junkio@cox.net>

git-fetch: follow lightweit tags as well.Junio C Hamano Sun, 19 Nov 2006 05:39:17 +0000 (21:39 -0800)

git-fetch: follow lightweit tags as well.

This side-ports commit fd19f620 from Cogito, in which I fixed
exactly the same bug. Somehow nobody noticed this for a long
time in git.

Signed-off-by: Junio C Hamano <junkio@cox.net>

Documentation: Correct alternates documentation, docume... Petr Baudis Sat, 18 Nov 2006 23:30:15 +0000 (00:30 +0100)

Documentation: Correct alternates documentation, document http-alternates

For one, the documentation invalidly claimed that the paths have to be
absolute when that's not the case and in fact there is a very valid reason
not to use absolute paths (documented the reason as well).

Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Documentation: Define symref and update HEAD descriptionPetr Baudis Sat, 18 Nov 2006 19:44:08 +0000 (20:44 +0100)

Documentation: Define symref and update HEAD description

HEAD was still described as a symlink instead of a symref.

Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>

Document git-runstatusRene Scharfe Sat, 18 Nov 2006 14:15:49 +0000 (15:15 +0100)

Document git-runstatus

I copied most of the text from git-status.txt.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>

git-apply: slightly clean up bitfield usageRene Scharfe Sat, 18 Nov 2006 12:07:09 +0000 (13:07 +0100)

git-apply: slightly clean up bitfield usage

This patch fixes a sparse warning about inaccurate_eof being a
"dubious one-bit signed bitfield", makes three more binary
variables members of this (now unsigned) bitfield and adds a
short comment to indicate the nature of two ternary variables.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>

sparse fix: Using plain integer as NULL pointerRene Scharfe Sat, 18 Nov 2006 12:06:56 +0000 (13:06 +0100)

sparse fix: Using plain integer as NULL pointer

Z_NULL is defined as 0, use a proper NULL pointer in its stead.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>