use strbuf_add_unique_abbrev() for adding short hashes, part 2
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
The command accesses default_abbrev (defined in environment.c and is
updated via core.abbrev configuration), but never makes any call to
git_config(). The output from "worktree list" ignores the abbrev
setting for this reason.
Make a call to git_config() to read the default set of configuration
variables at the beginning of the command.
When opening a loose object file, we often do this sequence:
- prepare a short buffer for the object header (on stack)
- call unpack_sha1_header() and have early part of the object data
inflated, enough to fill the buffer
- parse that data in the short buffer, assuming that the first part
of the object is <typename> SP <length> NUL
Because the parsing function parse_sha1_header_extended() is not
given the number of bytes inflated into the header buffer, it you
craft a file whose early part inflates a garbage sequence without SP
or NUL, and replace a loose object with it, it will end up reading
past the end of the inflated data.
To correct this, do the following four things:
- rename unpack_sha1_header() to unpack_sha1_short_header() and
have unpack_sha1_header_to_strbuf() keep calling that as its
helper function. This will detect and report zlib errors, but is
not aware of the format of a loose object (as before).
- introduce unpack_sha1_header() that calls the same helper
function, and when zlib reports it inflated OK into the buffer,
check if the inflated data has NUL. This would ensure that
parsing function will terminate within the buffer that holds the
inflated header.
- update unpack_sha1_header_to_strbuf() to check if the resulting
buffer has NUL for the same effect.
- update parse_sha1_header_extended() to make sure that its loop to
find the SP that terminates the <typename> stops at NUL.
Essentially, this makes unpack_*() functions that are asked to
unpack a loose object header to be a bit more strict and detect an
input that cannot possibly be a valid object header, even before the
parsing function kicks in.
Reported-by: Gustavo Grieco <gustavo.grieco@imag.fr> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with v2.5.0 git merge can handle FETCH_HEAD internally and
warns when it's called like 'git merge <message> HEAD <commit>' because
that syntax is deprecated. Use this feature in git-gui and get rid of
that warning.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Tested-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for converting certain calls of memcpy(3) to
COPY_ARRAY() and apply that transformation to the code base. The result
is
shorter and safer code. For now only consider calls where source and
destination have the same type, or in other words: easy cases.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add COPY_ARRAY, a safe and convenient helper for copying arrays,
complementing ALLOC_ARRAY and REALLOC_ARRAY. Users just specify source,
destination and the number of elements; the size of an element is
inferred automatically.
It checks if the multiplication of size and element count overflows.
The inferred size is passed first to st_mult, which allows the division
there to be done at compilation time.
As a basic type safety check it makes sure the sizes of source and
destination elements are the same. That's evaluated at compilation time
as well.
COPY_ARRAY is safe to use with NULL as source pointer iff 0 elements are
to be copied. That convention is used in some cases for initializing
arrays. Raw memcpy(3) does not support it -- compilers are allowed to
assume that only valid pointers are passed to it and can optimize away
NULL checks after such a call.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch-pack: do not reset in_vain on non-novel acks
The MAX_IN_VAIN mechanism was introduced in commit f061e5f ("fetch-pack:
give up after getting too many "ack continue"", 2006-05-24) to stop ref
negotiation if a number of consecutive "have"s have been sent with no
corresponding new acks. This is to stop the client from digging too deep
in an irrelevant side branch in vain without ever finding a common
ancestor. A use case (as described in that commit) is the scenario in
which the local repository has more roots than the remote repository.
However, during a negotiation in which stateless RPCs are used,
MAX_IN_VAIN will (almost) never trigger (in the more-roots scenario
above and others) because in each new request, the client has to inform
the server of objects it already has and knows the server has (to remind
the server of the state), which the server then acks.
Make fetch-pack only consider, as new acks for the purpose of
MAX_IN_VAIN, acks for objects for which the client has never received an
ack before in this session.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call getaddrinfo() to try to convert a short hostname
into a fully-qualified one (to use it as an email domain).
If there isn't a canonical name, getaddrinfo() will
generally return either a NULL addrinfo list, or one in
which ai->ai_canonname is a copy of the original name.
However, if the result of gethostname() looks like an IP
address, then getaddrinfo() behaves differently on some
systems. On OS X, it will return a "struct addrinfo" with a
NULL ai_canonname, and we segfault feeding it to strchr().
This is hard to test reliably because it involves not only a
system where we we have to fallback to gethostname() to come
up with an ident, but also where the hostname is a number
with no dots. But I was able to replicate the bug by faking
a hostname, like:
and running "git var GIT_AUTHOR_IDENT" on an OS X system.
Before this patch it segfaults, and after we correctly
complain of the bogus "user@1.(none)" address (though this
bogus address would be suitable for non-object uses like
writing reflogs).
Reported-by: Jonas Thiel <jonas.lierschied@gmx.de> Diagnosed-by: John Keeping <john@keeping.me.uk> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when this guide was written, cvsimport was the only
game in town. These days it is probably not the best option.
Rather than go into details, let's point people to the note
at the top of cvsimport which gives other options.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs/cvsimport: prefer cvs-fast-export to parsecvs
parsecvs maintenance was taken over by ESR, and the name
changed to cvs-fast-export as it learned to support that
output format. Let's point to cvs-fast-export, as it should
have additional bug-fixes and be more convenient to use.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify_packfile: check pack validity before accessing data
The verify_packfile() does not explicitly open the packfile;
instead, it starts with a sha1 checksum over the whole pack,
and relies on use_pack() to open the packfile as a side
effect.
If the pack cannot be opened for whatever reason (either
because its header information is corrupted, or perhaps
because a simultaneous repack deleted it), then use_pack()
will die(), as it has no way to return an error. This is not
ideal, as verify_packfile() otherwise tries to gently return
an error (this lets programs like git-fsck go on to check
other packs).
Instead, let's check is_pack_valid() up front, and return an
error if it fails. This will open the pack as a side effect,
and then use_pack() will later rely on our cached
descriptor, and avoid calling die().
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: ask homebrew for its path instead of hardcoding it
The TravisCI macOS build is broken because homebrew (a macOS dependency
manager) changed its internal directory structure [1]. This is a problem
because we modify the Perforce dependencies in the homebrew repository
before installing them.
Fix it by asking homebrew for its path instead of hardcoding it.
t3700-add: do not check working tree file mode without POSIXPERM
A recently introduced test checks the result of 'git status' after
setting the executable bit on a file. This check does not yield the
expected result when the filesystem does not support the executable
bit.
What we care about is that a file added with "--chmod=+x" has
executable bit in the index and that "--chmod=+x" (or any other
options for that matter) does not muck with working tree files.
The former is tested by other existing tests, so let's check the
latter more explicitly and only under POSIXPERM prerequisite.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new regexec_buf() function operates on buffers with an explicitly
specified length, rather than NUL-terminated strings.
We need to use this function whenever the buffer we want to pass to
regexec(3) may have been mmap(2)ed (and is hence not NUL-terminated).
Note: the original motivation for this patch was to fix a bug where
`git diff -G <regex>` would crash. This patch converts more callers,
though, some of which allocated to construct NUL-terminated strings,
or worse, modified buffers to temporarily insert NULs while calling
regexec(3). By converting them to use regexec_buf(), the code has
become much cleaner.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
regex: add regexec_buf() that can work on a non NUL-terminated string
We just introduced a test that demonstrates that our sloppy use of
regexec() on a mmap()ed area can result in incorrect results or even
hard crashes.
So what we need to fix this is a function that calls regexec() on a
length-delimited, rather than a NUL-terminated, string.
Happily, there is an extension to regexec() introduced by the NetBSD
project and present in all major regex implementation including
Linux', MacOSX' and the one Git includes in compat/regex/: by using
the (non-POSIX) REG_STARTEND flag, it is possible to tell the
regexec() function that it should only look at the offsets between
pmatch[0].rm_so and pmatch[0].rm_eo.
That is exactly what we need.
Since support for REG_STARTEND is so widespread by now, let's just
introduce a helper function that always uses it, and tell people
on a platform whose regex library does not support it to use the
one from our compat/regex/ directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
When our pickaxe code feeds file contents to regexec(), it implicitly
assumes that the file contents are read into implicitly NUL-terminated
buffers (i.e. that we overallocate by 1, appending a single '\0').
This is not so.
In particular when the file contents are simply mmap()ed, we can be
virtually certain that the buffer is preceding uninitialized bytes, or
invalid pages.
Note that the test we add here is known to be flakey: we simply cannot
know whether the byte following the mmap()ed ones is a NUL or not.
Typically, on Linux the test passes. On Windows, it fails virtually
every time due to an access violation (that's a segmentation fault for
you Unix-y people out there). And Windows would be correct: the
regexec() call wants to operate on a regular, NUL-terminated string,
there is no NUL in the mmap()ed memory range, and it is undefined
whether the next byte is even legal to access.
When run with --valgrind it demonstrates quite clearly the breakage, of
course.
Being marked with `test_expect_failure`, this test will sometimes be
declare "TODO fixed", even if it only passes by mistake.
This test case represents a Minimal, Complete and Verifiable Example of
a breakage reported by Chris Sidi.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The subdirectory 'sub' is created early in the test file. Later, a test
case removes it during its clean-up actions. However, this test case is
protected by POSIXPERM. Consequently, 'sub' remains when the POSIXPERM
prerequisite is not satisfied. Later, a recently introduced test case
creates 'sub' again. Use -p with mkdir so that it does not fail if 'sub'
already exists.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two functions in parse_branchname_arg(), verify_non_filename and
check_filename, need correct prefix in order to reconstruct the paths
and check for their existence. With NULL prefix, they just check paths
at top dir instead.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout.txt: document a common case that ignores ambiguation rules
Normally we err on the safe side: if something can be seen as both an
SHA1 and a pathspec, we stop and scream. In checkout, there is one
exception added in 859fdab (git-checkout: improve error messages, detect
ambiguities. - 2008-07-23), to allow the common case "git checkout
branch". Let's document this exception.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ah/misc-message-fixes:
unpack-trees: do not capitalize "working"
git-merge-octopus: do not capitalize "octopus"
git-rebase--interactive: fix English grammar
cat-file: put spaces around pipes in usage string
am: put spaces around pipe in usage string
Merge branch 'ep/use-git-trace-curl-in-tests' into maint
Update a few tests that used to use GIT_CURL_VERBOSE to use the
newer GIT_TRACE_CURL.
* ep/use-git-trace-curl-in-tests:
t5551-http-fetch-smart.sh: use the GIT_TRACE_CURL environment var
t5550-http-fetch-dumb.sh: use the GIT_TRACE_CURL environment var
test-lib.sh: preserve GIT_TRACE_CURL from the environment
t5541-http-push-smart.sh: use the GIT_TRACE_CURL environment var
A test spawned a short-lived background process, which sometimes
prevented the test directory from getting removed at the end of the
script on some platforms.
* js/t6026-clean-up:
t6026-merge-attr: clean up background process at end of test case
Merge branch 'jc/forbid-symbolic-ref-d-HEAD' into maint
"git symbolic-ref -d HEAD" happily removes the symbolic ref, but
the resulting repository becomes an invalid one. Teach the command
to forbid removal of HEAD.
* jc/forbid-symbolic-ref-d-HEAD:
symbolic-ref -d: do not allow removal of HEAD
Merge branch 'jk/test-lib-drop-pid-from-results' into maint
The test framework left the number of tests and success/failure
count in the t/test-results directory, keyed by the name of the
test script plus the process ID. The latter however turned out not
to serve any useful purpose. The process ID part of the filename
has been removed.
* jk/test-lib-drop-pid-from-results:
test-lib: drop PID from test-results/*.count
Clarify various ways to specify the "revision ranges" in the
documentation.
* po/range-doc:
doc: revisions: sort examples and fix alignment of the unchanged
doc: revisions: show revision expansion in examples
doc: revisions - clarify reachability examples
doc: revisions - define `reachable`
doc: gitrevisions - clarify 'latter case' is revision walk
doc: gitrevisions - use 'reachable' in page description
doc: revisions: single vs multi-parent notation comparison
doc: revisions: extra clarification of <rev>^! notation effects
doc: revisions: give headings for the two and three dot notations
doc: show the actual left, right, and boundary marks
doc: revisions - name the left and right sides
doc: use 'symmetric difference' consistently
Reset colors and attributes upon %C(auto) to enable full automatic
control over them; otherwise attributes like bold or reverse could
still be in effect from previous %C placeholders.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/config: default for color.* is color.ui
Since 4c7f181 (make color.ui default to 'auto', 2013-06-10), the
default for color.* when nothing is set is 'auto' and we still claimed
that the default was 'false'. Be more precise by saying explicitly
that the default is to follow color.ui, and recall that the default is
'auto' to avoid one indirection for the reader.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/perf/run: copy config.mak.autogen & friends to build area
Otherwise for people who use autotools-based configure in main worktree,
the performance testing results will be inconsistent as work and build
trees could be using e.g. different optimization levels.
NOTE config.status has to be copied because otherwise without it the build
would want to run reconfigure this way loosing just copied config.mak.autogen.
Signed-off-by: Kirill Smelkov <kirr@nexedi.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
use strbuf_addstr() for adding constant strings to a strbuf, part 2
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls. This makes the intent clearer and avoids
potential issues with printf format specifiers.
Provide a simple way to run Coccinelle against all source files, in the
form of a Makefile target. Running "make coccicheck" applies each
.cocci file in contrib/coccinelle/ on all source files. It generates
a .patch file for each .cocci file, containing the actual changes for
effecting the transformations described by the semantic patches.
Non-empty .patch files are reported. They can be applied to the work
tree using "patch -p0", but should be checked to e.g. make sure they
don't screw up formatting or create circular references.
Coccinelle's diagnostic output (stderr) is piped into .log files.
Linux has a much more elaborate make target of the same name; let's
start nice and easy.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
Both sha1_to_hex_r() and oid_to_hex_r() take two parameters, so use two
expressions in the semantic patch for transforming calls of the former
to the latter one.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add: modify already added files when --chmod is given
When the chmod option was added to git add, it was hooked up to the diff
machinery, meaning that it only works when the version in the index
differs from the version on disk.
As the option was supposed to mirror the chmod option in update-index,
which always changes the mode in the index, regardless of the status of
the file, make sure the option behaves the same way in git add.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As there are chmod options for both add and update-index, introduce a
new chmod_index_entry function to do the work. Use it in update-index,
while it will be used in add in the next patch.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch: show base info before email signature
Any text below the "-- " for the email signature gets treated as part of
the signature, and many mail clients will trim it from the quoted text
for a reply. Move it above the signature, so people can reply to it
more easily.
Similarly, when producing the patch as a MIME attachment, the
original code placed the base info after the attached part, which
would be discarded. Move the base info to the end of the part,
still inside the part boundary.
Add tests for the exact format of the email signature, and add tests
to ensure that the base info appears before the email signature when
producing a plain-text output, and that it appears before the part
boundary when producing a MIME attachment.
Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdiff: fix merging of hunks with -W context and -u context
If the function context for a hunk (with -W) reaches the beginning of
the next hunk then we need to merge these two -- otherwise we'd show
some lines twice, which looks strange and even confuses git apply. We
already do this checking and merging in xdl_emit_diff(), but forget to
consider regular context (with -u or -U).
Fix that by merging hunks already if function context of the first one
touches or overlaps regular context of the second one.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently there is no test checking the expected behaviour when multiple
chmod flags with different arguments are passed. As argument handling
is not in line with other git commands it's easy to miss and
accidentally change the current behaviour.
While there, fix the argument type of chmod_path, which takes an int,
but had a char passed in.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ib/t3700-add-chmod-x-updates' into tg/add-chmod+x-fix
Newly added tests to this topic uses helper functions that did not
exist back when the bug being fixed by the topic was introduced.
* ib/t3700-add-chmod-x-updates:
t3700: add a test_mode_in_index helper function
t3700: merge two tests into one
t3700: remove unwanted leftover files before running new tests
unpack-trees: pass checkout state explicitly to check_updates()
Add a parameter for the struct checkout variable to check_updates()
instead of using a static global variable. Passing it explicitly makes
object ownership and usage more easily apparent. And we get rid of a
static variable; those can be problematic in library-like code.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few functions were removed in 5a76aff1 ("add: convert to use
parse_pathspec", 2013-07-14), but we forgot to remove their external
declarations from pathspec.h while doing so.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fourth argument of strbuf_splice() is passed to memcpy(3), which is
not supposed to handle NULL pointers. Let's be extra careful and use a
valid empty string instead. It even shortens the source code. :)
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: always remove curl easy from curlm session on release
We must call curl_multi_remove_handle when releasing the slot to
prevent subsequent calls to curl_multi_add_handle from failing
with CURLM_ADDED_ALREADY (in curl 7.32.1+; older versions
returned CURLM_BAD_EASY_HANDLE)
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: consolidate #ifdefs for curl_multi_remove_handle
I find #ifdefs makes code difficult-to-follow.
An early version of this patch had error checking for
curl_multi_remove_handle calls, but caused some tests (e.g.
t5541) to fail under curl 7.26.0 on old Debian wheezy.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git add --chmod option was introduced in 4e55ed3 ("add: add
--chmod=+x / --chmod=-x options", 2016-05-31), but was never
documented. Document the feature.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
patch-ids: refuse to compute patch-id for merge commit
The patch-id code which powers "log --cherry-pick" doesn't
look at whether each commit is a merge or not. It just feeds
the commit's first parent to the diff, and ignores any
additional parents.
In theory, this might be useful if you wanted to find
equivalence between, say, a merge commit and a squash-merge
that does the same thing. But it also promotes a false
equivalence between distinct merges. For example, every
"merge -s ours" would look identical to an empty commit
(which is true in a sense, but presumably there was a value
in merging in the discarded history). Since patch-ids are
meant for throwing away duplicates, we should err on the
side of _not_ matching such merges.
Moreover, we may spend a lot of extra time computing these
merge diffs. In the case that inspired this patch, a "git
format-patch --cherry-pick" dropped from over 3 minutes to
less than 3 seconds.
This seems pretty drastic, but is easily explained. The
command was invoked by a "git rebase" of an older topic
branch; there had been tens of thousands of commits on the
upstream branch in the meantime. In addition, this project
used a topic-branch workflow with occasional "back-merges"
from "master" to each topic (to resolve conflicts on the
topics rather than in the merge commits). So there were not
only extra merges, but the diffs for these back-merges were
generally quite large (because they represented _everything_
that had been merged to master since the topic branched).
This patch treats a merge fed to commit_patch_id() or
add_commit_patch_id() as an error, and a lookup for such a
merge via has_commit_patch_id() will always return NULL.
An earlier version of the patch tried to distinguish between
"error" and "patch id for merges not defined", but that
becomes unnecessarily complicated. The only callers are:
1. revision traversals which want to do --cherry-pick;
they call add_commit_patch_id(), but do not care if it
fails. They only want to add what we can, look it up
later with has_commit_patch_id(), and err on the side
of not-matching.
2. format-patch --base, which calls commit_patch_id().
This _does_ notice errors, but should never feed a
merge in the first place (and if it were to do so
accidentally, then this patch is a strict improvement;
we notice the bug rather than generating a bogus
patch-id).
So in both cases, this does the right thing.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch-id code may be running inside another porcelain
like "git log" or "git format-patch", and therefore may have
set diff_detect_rename_default, either via the diff-ui
config, or by default since 5404c11 (diff: activate
diff.renames by default, 2016-02-25). This is the case even
if a command is run with `--no-renames`, as that is applied
only to the diff-options used by the command itself.
Rename detection doesn't help the patch-id results. It
_may_ actually hurt, as minor differences in the files that
would be overlooked by patch-id's canonicalization might
result in different renames (though I'd doubt that it ever
comes up in practice).
But mostly it is just a waste of CPU to compute these
renames.
Note that this does have one user-visible impact: the
prerequisite patches listed by "format-patch --base". There
may be some confusion between different versions of git as
older ones will enable renames, but newer ones will not.
However, this was already a problem, as people with
different settings for the "diff.renames" config would get
different results. After this patch, everyone should get the
same results, regardless of their config.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'hv/doc-commit-reference-style' into maint
A small doc update.
* hv/doc-commit-reference-style:
SubmittingPatches: use gitk's "Copy commit summary" format
SubmittingPatches: document how to reference previous commits
Merge branch 'bw/mingw-avoid-inheriting-fd-to-lockfile' into maint
The tempfile (hence its user lockfile) API lets the caller to open
a file descriptor to a temporary file, write into it and then
finalize it by first closing the filehandle and then either
removing or renaming the temporary file. When the process spawns a
subprocess after obtaining the file descriptor, and if the
subprocess has not exited when the attempt to remove or rename is
made, the last step fails on Windows, because the subprocess has
the file descriptor still open. Open tempfile with O_CLOEXEC flag
to avoid this (on Windows, this is mapped to O_NOINHERIT).
* bw/mingw-avoid-inheriting-fd-to-lockfile:
mingw: ensure temporary file handles are not inherited by child processes
t6026-merge-attr: child processes must not inherit index.lock handles
Merge branch 'dg/document-git-c-in-git-config-doc' into maint
The "git -c var[=val] cmd" facility to append a configuration
variable definition at the end of the search order was described in
git(1) manual page, but not in git-config(1), which was more likely
place for people to look for when they ask "can I make a one-shot
override, and if so how?"
* dg/document-git-c-in-git-config-doc:
doc: mention `git -c` in git-config(1)
Merge branch 'jk/difftool-command-not-found' into maint
"git difftool" by default ignores the error exit from the backend
commands it spawns, because often they signal that they found
differences by exiting with a non-zero status code just like "diff"
does; the exit status codes 126 and above however are special in
that they are used to signal that the command is not executable,
does not exist, or killed by a signal. "git difftool" has been
taught to notice these exit status codes.
Merge branch 'sb/checkout-explit-detach-no-advice' into maint
"git checkout --detach <branch>" used to give the same advice
message as that is issued when "git checkout <tag>" (or anything
that is not a branch name) is given, but asking with "--detach" is
an explicit enough sign that the user knows what is going on. The
advice message has been squelched in this case.
* sb/checkout-explit-detach-no-advice:
checkout: do not mention detach advice for explicit --detach option
When "git merge-recursive" works on history with many criss-cross
merges in "verbose" mode, the names the command assigns to the
virtual merge bases could have overwritten each other by unintended
reuse of the same piece of memory.
* rs/pull-signed-tag:
commit: use FLEX_ARRAY in struct merge_remote_desc
merge-recursive: fix verbose output for multiple base trees
commit: factor out set_merge_remote_desc()
commit: use xstrdup() in get_merge_parent()
The "t/" hierarchy is prone to get an unusual pathname; "make test"
has been taught to make sure they do not contain paths that cannot
be checked out on Windows (and the mechanism can be reusable to
catch pathnames that are not portable to other platforms as need
arises).
* js/test-lint-pathname:
t/Makefile: ensure that paths are valid on platforms we care
Merge branch 'js/mv-dir-to-new-directory' into maint
"git mv dir non-existing-dir/" did not work in some environments
the same way as existing mainstream platforms. The code now moves
"dir" to "non-existing-dir", without relying on rename("A", "B/")
that strips the trailing slash of '/'.
* js/mv-dir-to-new-directory:
git mv: do not keep slash in `git mv dir non-existing-dir/`
Merge branch 'js/import-tars-hardlinks' into maint
"import-tars" fast-import script (in contrib/) used to ignore a
hardlink target and replaced it with an empty file, which has been
corrected to record the same blob as the other file the hardlink is
shared with.
* js/import-tars-hardlinks:
import-tars: support hard links
Merge branch 'jk/push-force-with-lease-creation' into maint
"git push --force-with-lease" already had enough logic to allow
ensuring that such a push results in creation of a ref (i.e. the
receiving end did not have another push from sideways that would be
discarded by our force-pushing), but didn't expose this possibility
to the users. It does so now.
* jk/push-force-with-lease-creation:
t5533: make it pass on case-sensitive filesystems
push: allow pushing new branches with --force-with-lease
push: add shorthand for --force-with-lease branch creation
Documentation/git-push: fix placeholder formatting
There are certain house-keeping tasks that need to be performed at
the very beginning of any Git program, and programs that are not
built-in commands had to do them exactly the same way as "git"
potty does. It was easy to make mistakes in one-off standalone
programs (like test helpers). A common "main()" function that
calls cmd_main() of individual program has been introduced to
make it harder to make mistakes.
* jk/common-main:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
When `len < 1`, len has to be 0 or negative, emit_line will then remove the
first character and by then `len` would be negative. As this doesn't
happen, it is safe to assume it is dead code.
This continues to simplify the code, which was started in b8d9c1a66b
(2009-09-03, diff.c: the builtin_diff() deals with only two-file
comparison).
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>