receive-pack: release pack files before garbage-collecting

Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

merge: release pack files before garbage-collecting

Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

am: release pack files before garbage-collecting

Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

fetch: release pack files before garbage-collecting

Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.

This fixes https://github.com/git-for-windows/git/issues/500

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

config.mak.uname: supporting 64-bit MSys2

This just makes things compile, the test suite needs extra tender loving
care in addition to this change. We will address these issues in later
commits.

While at it, also allow building MSys2 Git (i.e. a Git that uses MSys2's
POSIX emulation layer).

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

config.mak.uname: support MSys2

For a long time, Git for Windows lagged behind Git's 2.x releases because
the Git for Windows developers wanted to let that big jump coincide with
a well-needed jump away from MSys to MSys2.

To understand why this is such a big issue, it needs to be noted that
many parts of Git are not written in portable C, but instead Git relies
on a POSIX shell and Perl to be available.

To support the scripts, Git for Windows has to ship a minimal POSIX
emulation layer with Bash and Perl thrown in, and when the Git for
Windows effort started in August 2007, this developer settled on using
MSys, a stripped down version of Cygwin. Consequently, the original name
of the project was "msysGit" (which, sadly, caused a *lot* of confusion
because few Windows users know about MSys, and even less care).

To compile the C code of Git for Windows, MSys was used, too: it sports
two versions of the GNU C Compiler: one that links implicitly to the
POSIX emulation layer, and another one that targets the plain Win32 API
(with a few convenience functions thrown in). Git for Windows'
executables are built using the latter, and therefore they are really
just Win32 programs. To discern executables requiring the POSIX
emulation layer from the ones that do not, the latter are called MinGW
(Minimal GNU for Windows) when the former are called MSys executables.

This reliance on MSys incurred challenges, too, though: some of our
changes to the MSys runtime -- necessary to support Git for Windows
better -- were not accepted upstream, so we had to maintain our own
fork. Also, the MSys runtime was not developed further to support e.g.
UTF-8 or 64-bit, and apart from lacking a package management system
until much later (when mingw-get was introduced), many packages provided
by the MSys/MinGW project lag behind the respective source code
versions, in particular Bash and OpenSSL. For a while, the Git for
Windows project tried to remedy the situation by trying to build newer
versions of those packages, but the situation quickly became untenable,
especially with problems like the Heartbleed bug requiring swift action
that has nothing to do with developing Git for Windows further.

Happily, in the meantime the MSys2 project (https://msys2.github.io/)
emerged, and was chosen to be the base of the Git for Windows 2.x. Just
like MSys, MSys2 is a stripped down version of Cygwin, but it is
actively kept up-to-date with Cygwin's source code. Thereby, it already
supports Unicode internally, and it also offers the 64-bit support that
we yearned for since the beginning of the Git for Windows project.

MSys2 also ported the Pacman package management system from Arch Linux
and uses it heavily. This brings the same convenience to which Linux
users are used to from `yum` or `apt-get`, and to which MacOSX users are
used to from Homebrew or MacPorts, or BSD users from the Ports system,
to MSys2: a simple `pacman -Syu` will update all installed packages to
the newest versions currently available.

MSys2 is also *very* active, typically providing package updates
multiple times per week.

It still required a two-month effort to bring everything to a state
where Git's test suite passes, many more months until the first official
Git for Windows 2.x was released, and a couple of patches still await
their submission to the respective upstream projects. Yet without MSys2,
the modernization of Git for Windows would simply not have happened.

This commit lays the ground work to supporting MSys2-based Git builds.

Assisted-by: Waldek Maleska <weakcamel@users.github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

format-patch: introduce format.outputDirectory configuration

We can pass -o/--output-directory to the format-patch command to store
patches in some place other than the working directory. This patch
introduces format.outputDirectory configuration option for same
purpose.

The case of usage of this configuration option can be convenience
to not pass every time -o/--output-directory if an user has pattern
to store all patches in the /patches directory for example.

The format.outputDirectory has lower priority than command line
option, so if user will set format.outputDirectory and pass the
command line option, a result will be stored in a directory that
passed to command line option.

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-p4.py: add support for filetype change

After changing the type of a file in the git repository, it is not possible to
"git p4 publish" the commit to perforce. This is due to the fact that the git
"T" status is not handled in git-p4.py. This can typically occur when replacing
an existing file with a symbolic link.

The "T" modifier is now supported in git-p4.py. When a file type has changed,
inform perforce with the "p4 edit -f auto" command.

Signed-off-by: Romain Picard <romain.picard@oakbits.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

lock_ref_sha1_basic: handle REF_NODEREF with invalid refs

We sometimes call lock_ref_sha1_basic with REF_NODEREF
to operate directly on a symbolic ref. This is used, for
example, to move to a detached HEAD, or when updating
the contents of HEAD via checkout or symbolic-ref.

However, the first step of the function is to resolve the
refname to get the "old" sha1, and we do so without telling
resolve_ref_unsafe() that we are only interested in the
symref. As a result, we may detect a problem there not with
the symref itself, but with something it points to.

The real-world example I found (and what is used in the test
suite) is a HEAD pointing to a ref that cannot exist,
because it would cause a directory/file conflict with other
existing refs. This situation is somewhat broken, of
course, as trying to _commit_ on that HEAD would fail. But
it's not explicitly forbidden, and we should be able to move
away from it. However, neither "git checkout" nor "git
symbolic-ref" can do so. We try to take the lock on HEAD,
which is pointing to a non-existent ref. We bail from
resolve_ref_unsafe() with errno set to EISDIR, and the lock
code thinks we are attempting to create a d/f conflict.

Of course we're not. The problem is that the lock code has
no idea what level we were at when we got EISDIR, so trying
to diagnose or remove empty directories for HEAD is not
useful.

To make things even more complicated, we only get EISDIR in
the loose-ref case. If the refs are packed, the resolution
may "succeed", giving us the pointed-to ref in "refname",
but a null oid. Later, we say "ah, the null oid means we are
creating; let's make sure there is room for it", but
mistakenly check against the _resolved_ refname, not the
original.

We can fix this by making two tweaks:

1. Call resolve_ref_unsafe() with RESOLVE_REF_NO_RECURSE
when REF_NODEREF is set. This means any errors
we get will be from the orig_refname, and we can act
accordingly.

We already do this in the REF_DELETING case, but we
should do it for update, too.

2. If we do get a "refname" return from
resolve_ref_unsafe(), even with RESOLVE_REF_NO_RECURSE
it may be the name of the ref pointed-to by a symref.
We already normalize this back to orig_refname before
taking the lockfile, but we need to do so before the
null_oid check.

While we're rearranging the REF_NODEREF handling, we can
also bump the initialization of lflags to the top of the
function, where we are setting up other flags. This saves us
from having yet another conditional block on REF_NODEREF
just to set it later.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

lock_ref_sha1_basic: always fill old_oid while holding lock

Our basic strategy for taking a ref lock is:

1. Create $ref.lock to take the lock

2. Read the ref again while holding the lock (during which
time we know that nobody else can be updating it).

3. Compare the value we read to the expected "old_sha1"

The value we read in step (2) is returned to the caller via
the lock->old_oid field, who may use it for other purposes
(such as writing a reflog).

If we have no "old_sha1" (i.e., we are unconditionally
taking the lock), then we obviously must omit step 3. But we
_also_ omit step 2. This seems like a nice optimization, but
it means that the caller sees only whatever was left in
lock->old_oid from previous calls to resolve_ref_unsafe(),
which happened outside of the lock.

We can demonstrate this race pretty easily. Imagine you have
three commits, $one, $two, and $three. One script just flips
between $one and $two, without providing an old-sha1:

while true; do
git update-ref -m one refs/heads/foo $one
git update-ref -m two refs/heads/foo $two
done

Meanwhile, another script tries to set the value to $three,
also not using an old-sha1:

while true; do
git update-ref -m three refs/heads/foo $three
done

If these run simultaneously, we'll see a lot of lock
contention, but each of the writes will succeed some of the
time. The reflog may record movements between any of the
three refs, but we would expect it to provide a consistent
log: the "from" field of each log entry should be the same
as the "to" field of the previous one.

But if we check this:

perl -alne '
print "mismatch on line $."
if defined $last && $F[0] ne $last;
$last = $F[1];
' .git/logs/refs/heads/foo

we'll see many mismatches. Why?

Because sometimes, in the time between lock_ref_sha1_basic
filling lock->old_oid via resolve_ref_unsafe() and it taking
the lock, there may be a complete write by another process.
And the "from" field in our reflog entry will be wrong, and
will refer to an older value.

This is probably quite rare in practice. It requires writers
which do not provide an old-sha1 value, and it is a very
quick race. However, it is easy to fix: we simply perform
step (2), the read-under-lock, whether we have an old-sha1
or not. Then the value we hand back to the caller is always
atomic.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Sync with maint

* maint:
l10n: ko.po: Add Korean translation

First batch for post 2.7 cycle

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Merge branch 'vl/grep-configurable-threads'

"git grep" can now be configured (or told from the command line)
how many threads to use when searching in the working tree files.

* vl/grep-configurable-threads:
grep: add --threads=<num> option and grep.threads configuration
grep: slight refactoring to the code that disables threading
grep: allow threading even on a single-core machine

Merge branch 'ea/blame-progress'

"git blame" learned to produce the progress eye-candy when it takes
too much time before emitting the first line of the result.

* ea/blame-progress:
blame: add support for --[no-]progress option

Merge branch 'sb/submodule-parallel-fetch'

Add a framework to spawn a group of processes in parallel, and use
it to run "git fetch --recurse-submodules" in parallel.

Rerolled and this seems to be a lot cleaner. The merge of the
earlier one to 'next' has been reverted.

* sb/submodule-parallel-fetch:
submodules: allow parallel fetching, add tests and documentation
fetch_populated_submodules: use new parallel job processing
run-command: add an asynchronous parallel child processor
sigchain: add command to pop all common signals
strbuf: add strbuf_read_once to read without blocking
xread: poll on non blocking fds
submodule.c: write "Fetching submodule <foo>" to stderr

Merge branch 'ps/push-delete-option'

"branch --delete" has "branch -d" but "push --delete" does not.

* ps/push-delete-option:
push: add '-d' as shorthand for '--delete'
push: add '--delete' flag to synopsis

Merge branch 'ep/make-phoney'

A slight update to the Makefile.

* ep/make-phoney:
Makefile: add missing phony target

Merge branch 'nd/stop-setenv-work-tree'

An earlier change in 2.5.x-era broke users' hooks and aliases by
exporting GIT_WORK_TREE to point at the root of the working tree,
interfering when they tried to use a different working tree without
setting GIT_WORK_TREE environment themselves.

* nd/stop-setenv-work-tree:
Revert "setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR"

notes: allow treeish expressions as notes ref

init_notes() is the main point of entry to the notes API. It ensures
that the input can be used as ref, because it needs a ref to update to
store notes tree after modifying it.

There however are many use cases where notes tree is only read, e.g.
"git log --notes=...". Any notes-shaped treeish could be used for such
purpose, but it is not allowed due to existing restriction.

Allow treeish expressions to be used in the case the notes tree is going
to be used without write "permissions". Add a flag to distinguish
whether the notes tree is intended to be used read-only, or will be
updated.

With this change, operations that use notes read-only can be fed any
notes-shaped tree-ish can be used, e.g. git log --notes=notes@{1}.

Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Merge branch 'maint' of git://github.com/git-l10n/git-po into maint

* 'maint' of git://github.com/git-l10n/git-po:
l10n: ko.po: Add Korean translation

gitweb: squelch "uninitialized value" warning

git_object() chomps $type that is read from "cat-file -t", but
it does so before checking if $type is defined, resulting in
a Perl warning in the server error log:

gitweb.cgi: Use of uninitialized value $type in scalar chomp at
[...]/gitweb.cgi line 7579., referer: [...]

when trying to access a non-existing commit, for example:

http://HOST/?p=PROJECT.git;a=commit;h=NON_EXISTING_COMMIT

Check the value in $type before chomping. This will cause us to
call href with its action parameter set to undef when formulating
the URL to redirect to, but that is harmless, as the function treats
a parameter that set to undef as if it does not exist.

Signed-off-by: Øyvind A. Holm <sunny@sunbase.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9901-git-web--browse.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9501-gitweb-standalone-http-status.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9350-fast-export.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9300-fast-import.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9150-svk-mergetickets.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9145-git-svn-master-branch.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9138-git-svn-authors-prog.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9137-git-svn-dcommit-clobber-series.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9132-git-svn-broken-symlink.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9130-git-svn-authors-file.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9129-git-svn-i18n-commitencoding.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9119-git-svn-info.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9118-git-svn-funky-branch-names.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9114-git-svn-dcommit-merge.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9110-git-svn-use-svm-props.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9109-git-svn-multi-glob.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9108-git-svn-glob.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9107-git-svn-migrate.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9105-git-svn-commit-diff.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9104-git-svn-follow-parent.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9101-git-svn-props.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t9100-git-svn-basic.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

checkout,clone: check return value of create_symref

It's unlikely that we would fail to create or update a
symbolic ref (especially HEAD), but if we do, we should
notice and complain. Note that there's no need to give more
details in our error message; create_symref will already
have done so.

While we're here, let's also fix a minor memory leak in
clone.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

builtin/grep: add grep.fallbackToNoIndex config

Currently when git grep is used outside of a git repository without the
--no-index option git simply dies. For convenience, add a
grep.fallbackToNoIndex configuration variable. If set to true, git grep
behaves like git grep --no-index if it is run outside of a git
repository. It defaults to false, preserving the current behavior.

Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Handle more file writes correctly in shared repos

In shared repositories, we have to be careful when writing files whose
permissions do not allow users other than the owner to write them.

In particular, we force the marks file of fast-export and the FETCH_HEAD
when fetching to be rewritten from scratch.

This commit does not touch other calls to fopen() that want to
write files:

- commands that write to working tree files (core.sharedRepository
does not affect permission bits of working tree files),
e.g. .rej file created by "apply --reject", result of applying a
previous conflict resolution by "rerere", "git merge-file".

- git am, when splitting mails (git-am correctly cleans up its directory
after finishing, so there is no need to share those files between users)

- git submodule clone, when writing the .git file, because the file
will not be overwritten

- git_terminal_prompt() in compat/terminal.c, because it is not writing to
a file at all

- git diff --output, because the output file is clearly not intended to be
shared between the users of the current repository

- git fast-import, when writing a crash report, because the reports' file
names are unique due to an embedded process ID

- mailinfo() in mailinfo.c, because the output is clearly not intended to
be shared between the users of the current repository

- check_or_regenerate_marks() in remote-testsvn.c, because this is only
used for Git's internal testing

- git fsck, when writing lost&found blobs (this should probably be
changed, but left as a low-hanging fruit for future contributors).

Note that this patch does not touch callers of write_file() and
write_file_gently(), which would benefit from the same scrutiny as
to usage in shared repositories. Most notable users are branch,
daemon, submodule & worktree, and a worrisome call in transport.c
when updating one ref (which ignores the shared flag).

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t7810: correct --no-index test

GIT_CEILING_DIRECTORIES doesn't prevent chdir up into another directory
while looking for a repository directory if it is equal to the current
directory. Because of this, the test which claims to test the git grep
--no-index command outside of a repository actually tests it inside of a
repository. The test_must_fail assertions still pass because the git
grep only looks at untracked files and therefore no file matches, but
not because it's run outside of a repository as it was originally
intended.

Set the GIT_CEILING_DIRECTORIES environment variable to the parent
directory of the directory in which the git grep command is executed, to
make sure it is actually run outside of a git repository.

In addition, the && chain was broken in a couple of places in the same
test, fix that.

Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t9001-send-email.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t8003-blame-corner-cases.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7700-repack.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7602-merge-octopus-many.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7505-prepare-commit-msg-hook.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7504-commit-msg-hook.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7408-submodule-reference.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7406-submodule-update.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7103-reset-bare.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

docs: clarify that --depth for git-fetch works with newly initialized repos

The original wording sounded as if --depth could only be used to deepen or
shorten the history of existing repos. However, that is not the case. In a
workflow like

$ git init
$ git remote add origin https://github.com/git/git.git
$ git fetch --depth=1

The newly initialized repo is properly created as a shallow repo.

Signed-off-by: Junio C Hamano <gitster@pobox.com>

docs: say "commits" in the --depth option wording for git-clone

It is not wrong to talk about "revisions" here, but in this context
revisions are always commits, and that is how we already name it in the
git-fetch docs. So align the docs by always referring to "commits".

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"

This reverts commit 57534ee77d22e725d971ee89c77dc6aad61c573f. The
feature added in that commit requires that patterns behave the same way
from anywhere. But some patterns can behave differently depending on
current "working" directory. The conditions to catch and avoid these
patterns are too loose. The untracked listing[1] and sparse-checkout
selection[2] can become incorrect as a result.

[1] http://article.gmane.org/gmane.comp.version-control.git/283520
[2] http://article.gmane.org/gmane.comp.version-control.git/283532

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7006-pager.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7004-tag.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7003-filter-branch.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t7001-mv.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t6132-pathspec-exclude.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t6032-merge-large-rename.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t6015-rev-list-show-all-parents.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t6002-rev-list-bisect.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t6001-rev-list-graft.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t5900-repo-selection.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

commit: allow editing the commit message even in shared repos

It was pointed out by Yaroslav Halchenko that the file containing the
commit message is writable only by the owner, which means that we have
to rewrite it from scratch in a shared repository.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

docs: clarify that passing --depth to git-clone implies --single-branch

It is confusing to document how --depth behaves as part of the
--single-branch docs. Better move that part to the --depth docs, saying
that it implies --single-branch by default.

Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Expand documentation describing --signoff

Modify various document (man page) files to explain
in more detail what --signoff means.

This was inspired by https://lwn.net/Articles/669976/ where
paulj noted, "adding [the] '-s' argument to [a] git commit
doesn't really mean you have even heard of the DCO...".
Extending git's documentation will make it easier to argue
that developers understood --signoff when they use it.

Signed-off-by: David A. Wheeler <dwheeler@dwheeler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

reflog-walk: don't segfault on non-commit sha1's in the reflog

git reflog (ab)uses the log machinery to display its list of log
entries. To do so it must fake commit parent information for the log
walker.

For refs in refs/heads this is no problem, as they should only ever
point to commits. Tags and other refs however can point to anything,
thus their reflog may contain non-commit objects.

To avoid segfaulting, we check whether reflog entries are commits before
feeding them to the log walker and skip any non-commits. This means that
git reflog output will be incomplete for such refs, but that's one step
up from segfaulting. A more complete solution would be to decouple git
reflog from the log walker machinery.

Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t6050-replace: make failing editor test more robust

'git replace --edit' should error out when the invoked editor fails,
but the test checking this behavior would not notice if this weren't
the case.

The test in question, ever since it was added in 85f98fc037ae
(replace: add tests for --edit, 2014-05-17), has simulated a failing
editor in an unconventional way:

test_must_fail env GIT_EDITOR='./fakeeditor;false' git replace --edit

I presume the reason for this unconventional editor was the fact that
'git replace --edit' requires the edited object to be different from
the original, but a mere 'false' as editor would leave the object
unchanged and 'git replace --edit' would error out anyway complaining
about the new and the original object files being the same. Running
'fakeeditor' before 'false' was supposed to ensure that the object
file is modified and thus 'git replace --edit' errors out because of
the failed editor.

However, this editor doesn't actually modify the edited object,
because start_command() turns this editor into:

/bin/sh -c './fakeeditor;false "$@"' './fakeeditor;false' \
'.../.git/REPLACE_EDITOBJ'

This means that the test's fakeeditor script doesn't even get the path
of the object to be edited as argument, triggering error messages from
the commands executed inside the script ('sed' and 'mv'), and
ultimately leaving the object file unchanged.

If a patch were to remove the die() from the error path after
launch_editor(), the test would not catch it, because 'git replace'
would continue execution past launch_editor() and would error out a
bit later due to the unchanged edited object. Though 'git replace'
would error out for the wrong reason, this would satisfy
'test_must_fail' just as well, and the test would succeed leaving the
undesired change unnoticed.

Create a proper failing fake editor script for this test to ensure
that the edited object is in fact modified and 'git replace --edit'
won't error out because the new and original object files are the
same.

Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

for-each-ref: document `creatordate` and `creator` fields

These were introduced back in 2006 at 3175aa1ec28c but
never documented.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Git 2.7

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Sync with 2.6.5

Git 2.6.5

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Merge branch 'jk/pending-keep-tag-name' into maint

History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.

* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array

Merge branch 'jk/symbolic-ref-maint' into maint

"git symbolic-ref" forgot to report a failure with its exit status.

* jk/symbolic-ref-maint:
t1401: test reflog creation for git-symbolic-ref
symbolic-ref: propagate error code from create_symref()

Merge branch 'jk/ident-loosen-getpwuid' into maint

When getpwuid() on the system returned NULL (e.g. the user is not
in the /etc/passwd file or other uid-to-name mappings), the
codepath to find who the user is to record it in the reflog barfed
and died. Loosen the check in this codepath, which already accepts
questionable ident string (e.g. host part of the e-mail address is
obviously bogus), and in general when we operate fmt_ident() function
in non-strict mode.

* jk/ident-loosen-getpwuid:
ident: loosen getpwuid error in non-strict mode
ident: keep a flag for bogus default_email
ident: make xgetpwuid_self() a static local helper

Merge branch 'jk/send-email-ssl-errors' into maint

Improve error reporting when SMTP TLS fails.

* jk/send-email-ssl-errors:
send-email: enable SSL level 1 debug output

Merge branch 'sg/completion-no-column' into maint

The completion script (in contrib/) used to list "git column"
(which is not an end-user facing command) as one of the choices

* sg/completion-no-column:
completion: remove 'git column' from porcelain commands

t/t5710-info-alternate.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t5700-clone-reference.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t5601-clone.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t5570-git-daemon.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t5550-http-fetch-dumb.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t5538-push-shallow.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t5537-fetch-shallow.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t5532-fetch-proxy.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t5530-upload-pack-error.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t/t5522-pull-symlink.sh: use the $( ... ) construct for command substitution

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-send-email: do not double-escape quotes from mutt

mutt saves aliases with escaped quotes in the form of:

alias dot \"Dot U. Sir\" <somebody@example.org>

When we pass through our sanitize_address routine,
we end up with double-escaping:

To: "\\\"Dot U. Sir\\\" <somebody@example.org>

Remove the escaping in mutt only for now, as I am not sure
if other mailers can do this or if this is better fixed in
sanitize_address.

Cc: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Cc: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

bswap: add NO_UNALIGNED_LOADS define

The byte-swapping code automatically decides, based on the
platform, whether it is sensible to cast and do a potentially
unaligned ntohl(), or to pick individual bytes out of an
array.

It can be handy to override this decision, though, when
turning on compiler flags that will complain about unaligned
loads (such as -fsanitize=undefined). This patch adds a
macro check to make this possible.

There's no nice Makefile knob here; this is for prodding at
Git's internals, and anybody using it can set
"-DNO_UNALIGNED_LOADS" in the same place they are setting up
"-fsanitize".

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

avoid shifting signed integers 31 bits

We sometimes use 32-bit unsigned integers as bit-fields.
It's fine to access the MSB, because it's unsigned. However,
doing so as "1 << 31" is wrong, because the constant "1" is
a signed int, and we shift into the sign bit, causing
undefined behavior.

We can fix this by using "1U" as the constant.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

l10n: ko.po: Add Korean translation

Signed-off-by: Changwoo Ryu <cwryu@debian.org>
Signed-off-by: Hyunjun Kim <yoloseem@users.noreply.github.com>

Merge tag 'l10n-2.7.0-rnd2+de' of git://github.com/git-l10n/git-po

l10n-2.7.0-rnd2+de

* tag 'l10n-2.7.0-rnd2+de' of git://github.com/git-l10n/git-po:
l10n: de.po: translate 68 new messages
l10n: de.po: improve some translations

user-manual: add addition gitweb information

Rework the section on gitweb to add information about the cgi script
and the instaweb command.

Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

user-manual: add section documenting shallow clones

Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>