* sb/leaks:
http: release the memory of a http pack request as well
read-cache: fix memleak
add_to_index(): free unused cache-entry
commit.c: fix a memory leak
http-push: remove unneeded cleanup
merge-recursive: fix memleaks
merge-blobs.c: fix a memleak
builtin/apply.c: fix a memleak
update-index: fix a memleak
read-cache: free cache entry in add_to_index in case of early return
Merge branch 'js/completion-ctags-pattern-substitution-fix' into maint
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
The run-command interface was easy to abuse and make a pipe for us
to read from the process, wait for the process to finish and then
attempt to read its output, which is a pattern that lead to a
deadlock. Fix such uses by introducing a helper to do this
correctly (i.e. we need to read first and then wait the process to
finish) and also add code to prevent such abuse in the run-command
helper.
* jk/run-command-capture:
run-command: forbid using run_command with piped output
trailer: use capture_command
submodule: use capture_command
wt-status: use capture_command
run-command: introduce capture_command helper
wt_status: fix signedness mismatch in strbuf_read call
wt-status: don't flush before running "submodule status"
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
The split-index mode introduced at v2.3.0-rc0~41 was broken in the
codepath to protect us against a broken reimplementation of Git
that writes an invalid index with duplicated index entries, etc.
* tg/fix-check-order-with-split-index:
read-cache: fix reading of split index
"git fetch" that fetches a commit using the allow-tip-sha1-in-want
extension could have failed to fetch all the requested refs.
* jk/fetch-pack:
fetch-pack: remove dead assignment to ref->new_sha1
fetch_refs_via_pack: free extra copy of refs
filter_ref: make a copy of extra "sought" entries
filter_ref: avoid overwriting ref->old_sha1 with garbage
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
"git log --graph --no-walk A B..." is a otcnflicting request that
asks nonsense; no-walk tells us show discrete points in the
history, while graph asks to draw connections between these
discrete points. Forbid the combination.
* dj/log-graph-with-no-walk:
revision: forbid combining --graph and --no-walk
"git rev-list --bisect --first-parent" does not work (yet) and can
even cause SEGV; forbid it. "git log --bisect --first-parent"
would not be useful until "git bisect --first-parent" materializes,
so it is also forbidden for now.
* kd/rev-list-bisect-first-parent:
rev-list: refuse --first-parent combined with --bisect
The idea of this helper is that we want to save the current
value of a config variable and then restore it again after
the test completes. However, there's no point in actually
saving the value; it should always be restored to the string
"never" (which you can confirm by instrumenting
save_confirm to print the value it finds).
Let's just replace it with a single test_when_finished call.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0020: use test_* helpers instead of hand-rolled messages
These tests are not wrong, but it is much shorter and more
idiomatic to say "verbose" or "test_must_fail" rather than
printing our own messages on failure. Likewise, there is no
need to say "happy" at the end of a test; the test suite
takes care of that.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since shell loops may drop the exit code of failed commands
inside the loop, some tests try to keep track of the status
by setting a variable. This can end up cumbersome and hard
to read; it is much simpler to just exit directly from the
loop using "return 1" (since each case is either in a helper
function or inside a test snippet).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t: fix some trivial cases of ignored exit codes in loops
These are all cases where we do a setup step of the form:
for i in $foo; do
set_up $i || break
done &&
more_setup
would not notice a failure in set_up (because break always
returns a 0 exit code). These are just setup steps that we
do not expect to fail, but it does not hurt to be defensive.
Most can be fixed by converting the "break" to a "return 1"
(since we eval our tests inside a function for just this
purpose). A few of the loops are inside subshells, so we can
use just "exit 1" to break out of the subshell. And a few
can actually be made shorter by just unrolling the loop.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking a list of file mtimes, we use a loop and break
out early from the loop if any entry does not match.
However, the exit code of a loop exited via break is always
0, meaning that the test will fail to notice we had a
mismatch. Since the loop is inside a function, we can fix
this by doing an early "return 1".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we test deleting notes, we run "git notes remove" in a
loop. However, the exit value of the loop will only reflect
the final note we process. We should break out of the loop
with a failing exit code as soon as we see a problem.
Note that we can call "exit 1" here without explicitly
creating a subshell, because the while loop on the
right-hand side of a pipe executes in its own implicit
subshell.
Note also that the "break" above does not suffer the same
problem; it is meant to exit the loop early at a certain
number of iterations. We can bump it into the conditional of
the loop to make this more obvious.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
will correctly break out of the loop when we see a failure
of one item, but the resulting exit code will always be
zero. We can fix that by putting the loop into a function or
subshell, but in this case it is simpler still to just
unroll the loop. We do add a helper function, which
hopefully makes the end result even more readable (in
addition to being shorter).
Reported-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When copying the test repository, we try to detect whether
the copy succeeded. However, most of the heavy lifting is
done inside a for loop, where our "break" will lose the exit
code of the failing "cp". We can take advantage of the fact
that we are in a subshell, and just "exit 1" to break out
with a code.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'master' of git://ozlabs.org/~paulus/gitk
* 'master' of git://ozlabs.org/~paulus/gitk:
gitk: Update .po files
gitk: l10n: Add Catalan translation
gitk: Fix typo in Russian translation
gitk: Remove tcl-format flag from a message that shouldn't have it
gitk: Pass --invert-grep option down to "git log"
gitk: Synchronize config file writes
gitk: Report errors in saving config file
gitk: Only write changed configuration variables
gitk: Enable mouse horizontal scrolling in diff pane
gitk: Default wrcomcmd to use --pretty=email
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
At the first look, a user may think the default version is "23". Even
with UNIX background, there's no reference anywhere close that may
indicate this is glob or regex.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
* jk/test-annoyances:
t5551: make EXPENSIVE test cheaper
t5541: move run_with_cmdline_limit to test-lib.sh
t: pass GIT_TRACE through Apache
t: redirect stderr GIT_TRACE to descriptor 4
t: translate SIGINT to an exit
Merge branch 'jc/decorate-leaky-separator-color' into maint
"git log --decorate" did not reset colors correctly around the
branch names.
* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
Merge branch 'km/imap-send-libcurl-options' into maint
"git imap-send" learned to optionally talk with an IMAP server via
libcURL; because there is no other option when Git is built with
NO_OPENSSL option, use that codepath by default under such
configuration.
* km/imap-send-libcurl-options:
imap-send: use cURL automatically when NO_OPENSSL defined
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
Merge branch 'tb/connect-ipv6-parse-fix' into maint
We did not parse username followed by literal IPv6 address in SSH
transport URLs, e.g. ssh://user@[2001:db8::1]:22/repo.git
correctly.
* tb/connect-ipv6-parse-fix:
t5500: show user name and host in diag-url
t5601: add more test cases for IPV6
connect.c: allow ssh://user@[2001:db8::1]/repo.git
`ce` is allocated in make_cache_entry and should be freed if it is not
used any more. refresh_cache_entry as a wrapper around refresh_cache_ent
will either return
- the `ce` given as the parameter, when it was up-to-date;
- a new updated cache entry which is allocated to new memory; or
- a NULL when refreshing failed.
In the latter two cases, the original cache-entry `ce` is not used
and needs to be freed. The rule can be expressed as "if the return
value from refresh is different from the original ce, ce is no
longer used."
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allocate a cache-entry pretty early in the function and then
decide either not to do anything when we are pretending to add, or
add it and then get an error (another possibility is obviously to
succeed).
When pretending or failing to add, we forgot to free the
cache-entry.
Noticed during a discussion on Stefan's patch to change the coding
style without fixing the issue ;-)
These string_list instances were allocated by get_renames() and
get_unmerged for the sole use of this caller, and the function is
responsible for freeing them, not just their contents.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run-command: forbid using run_command with piped output
Because run_command both spawns and wait()s for the command
before returning control to the caller, any reads from the
pipes we open must necessarily happen after wait() returns.
This can lead to deadlock, as the child process may block
on writing to us while we are blocked waiting for it to
exit.
Worse, it only happens when the child fills the pipe
buffer, which means that the problem may come and go
depending on the platform and the size of the output
produced by the child.
Let's detect and flag this dangerous construct so that we
can catch potential bugs early in the test suite rather than
having them happen in the field.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read from a trailer.*.command sub-program, the
current code uses run_command followed by a pipe read, which
can result in deadlock (though in practice you would have to
have a large trailer for this to be a problem). The current
code also leaks the file descriptor for the pipe to the
sub-command.
Instead, let's use capture_command, which makes this simpler
(and we can get rid of our custom helper).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In is_submodule_commit_present, we call run_command followed
by a pipe read, which is prone to deadlock. It is unlikely
to happen in this case, as rev-list should never produce
more than a single line of output, but it does not hurt to
avoid an anti-pattern (and using the helper simplifies the
setup and cleanup).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we spawn "git submodule status" to read its output, we
use run_command() followed by strbuf_read() read from the
pipe. This can deadlock if the subprocess output is larger
than the system pipe buffer.
Furthermore, if start_command() fails, we'll try to read
from a bogus descriptor (probably "-1" or a descriptor we
just closed, but it is a bad idea for us to make assumptions
about how start_command implements its error handling). And
if start_command succeeds, we leak the file descriptor for
the pipe to the child.
All of these can be solved by using the capture_command
helper.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
But that is not quite right either. We are examining cmd.out
and running finish_command whether start_command succeeded
or not, which is wrong. Moreover, these snippets do not do
any error handling. If our read() fails, we must make sure
to still call finish_command (to reap the child process).
And both snippets failed to close the cmd.out descriptor,
which they must do (provided start_command succeeded).
Let's introduce a run-command helper that can make this a
bit simpler for callers to get right.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: use __gitcomp_nl() for completing refs
We do that almost everywhere, because it's faster for large number of
refs, see a31e62629 (completion: optimize refs completion, 2011-10-15).
These were the last two places where we still used __gitcomp() for
completing refs.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt_status: fix signedness mismatch in strbuf_read call
We call strbuf_read(), and want to know whether we got any
output. To do so, we assign the result to a size_t, and
check whether it is non-zero.
But strbuf_read returns a signed ssize_t. If it encounters
an error, it will return -1, and we'll end up treating this
the same as if we had gotten output. Instead, we can just
check whether our buffer has anything in it (which is what
we care about anyway, and is the same thing since we know
the buffer was empty to begin with).
Note that the "len" variable actually has two roles in this
function. Now that we've eliminated the first, we can push the
declaration closer to the point of use for the second one.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status: don't flush before running "submodule status"
This is a holdover from the original implementation in ac8d5af (builtin-status: submodule summary support,
2008-04-12), which just had the sub-process output to our
descriptor; we had to make sure we had flushed any data that
we produced before it started writing.
Since 3ba7407 (submodule summary: ignore --for-status
option, 2013-09-06), however, we pipe the sub-process output
back to ourselves. So there's no longer any need to flush
(it does not hurt, but it may leave readers wondering why we
do it).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-cache: free cache entry in add_to_index in case of early return
This frees `ce` would be leaking in the error path.
Additionally a free is moved towards the return. This helps code
readability as we often have this pattern of freeing resources just
before return/exit and not in between the code.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The split index extension uses ewah bitmaps to mark index entries as
deleted, instead of removing them from the index directly. This can
result in an on-disk index, in which entries of stage #0 and higher
stages appear, which are removed later when the index bases are merged.
15999d0 read_index_from(): catch out of order entries when reading an
index file introduces a check which checks if the entries are in order
after each index entry is read in do_read_index. This check may however
fail when a split index is read.
Fix this by moving checking the index after we know there is no split
index or after the split index bases are successfully merged instead.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --decorate" did not reset colors correctly around the
branch names.
* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
"git imap-send" learned to optionally talk with an IMAP server via
libcURL; because there is no other option when Git is built with
NO_OPENSSL option, use that codepath by default under such
configuration.
* km/imap-send-libcurl-options:
imap-send: use cURL automatically when NO_OPENSSL defined
Portability fixes and workarounds for shell scripts have been added
to help BSD-derived systems.
* km/bsd-shells:
t5528: do not fail with FreeBSD shell
help.c: use SHELL_PATH instead of hard-coded "/bin/sh"
git-compat-util.h: move SHELL_PATH default into header
git-instaweb: use @SHELL_PATH@ instead of /bin/sh
git-instaweb: allow running in a working tree subdirectory
"git branch" on a detached HEAD always said "(detached from xyz)",
even when "git status" would report "detached at xyz". The HEAD is
actually at xyz and haven't been moved since it was detached in
such a case, but the user cannot read what the current value of
HEAD is when "detached from" is used.
* mg/detached-head-report:
branch: name detached HEAD analogous to status
wt-status: refactor detached HEAD analysis
When we delete a ref, we have to rewrite the entire
packed-refs file. We take this opportunity to "curate" the
packed-refs file and drop any entries that are crufty or
broken.
Dropping broken entries (e.g., with bogus names, or ones
that point to missing objects) is actively a bad idea, as it
means that we lose any notion that the data was there in the
first place. Aside from the general hackiness that we might
lose any information about ref "foo" while deleting an
unrelated ref "bar", this may seriously hamper any attempts
by the user at recovering from the corruption in "foo".
They will lose the sha1 and name of "foo"; the exact pointer
may still be useful even if they recover missing objects
from a different copy of the repository. But worse, once the
ref is gone, there is no trace of the corruption. A
follow-up "git prune" may delete objects, even though it
would otherwise bail when seeing corruption.
We could just drop the "broken" bits from
curate_packed_refs, and continue to drop the "crufty" bits:
refs whose loose counterpart exists in the filesystem. This
is not wrong to do, and it does have the advantage that we
may write out a slightly smaller packed-refs file. But it
has two disadvantages:
1. It is a potential source of races or mistakes with
respect to these refs that are otherwise unrelated to
the operation. To my knowledge, there aren't any active
problems in this area, but it seems like an unnecessary
risk.
2. We have to spend time looking up the matching loose
refs for every item in the packed-refs file. If you
have a large number of packed refs that do not change,
that outweighs the benefit from writing out a smaller
packed-refs file (it doesn't get smaller, and you do a
bunch of directory traversal to find that out).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
repack: turn on "ref paranoia" when doing a destructive repack
If we are repacking with "-ad", we will drop any unreachable
objects. Likewise, using "-Ad --unpack-unreachable=<time>"
will drop any old, unreachable objects. In these cases, we
want to make sure the reachability we compute with "--all"
is complete. We can do this by passing GIT_REF_PARANOIA=1 in
the environment to pack-objects.
Note that "-Ad" is safe already, because it only loosens
unreachable objects. It is up to "git prune" to avoid
deleting them.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prune should know about broken objects at the tips of refs,
so that we can feed them to our traversal rather than
ignoring them. It's better for us to abort the operation on
the broken object than it is to start deleting objects with
an incomplete view of the reachability namespace.
Note that for missing objects, aborting is the best we can
do. For a badly-named ref, we technically could use its sha1
as a reachability tip. However, the iteration code just
feeds us a null sha1, so there would be a reasonable amount
of code involved to pass down our wishes. It's not really
worth trying to do better, because this is a case that
should happen extremely rarely, and the message we provide:
fatal: unable to parse object: refs/heads/bogus:name
is probably enough to point the user in the right direction.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most operations that iterate over refs are happy to ignore
broken cruft. However, some operations should be performed
with knowledge of these broken refs, because it is better
for the operation to choke on a missing object than it is to
silently pretend that the ref did not exist (e.g., if we are
computing the set of reachable tips in order to prune
objects).
These processes could just call for_each_rawref, except that
ref iteration is often hidden behind other interfaces. For
instance, for a destructive "repack -ad", we would have to
inform "pack-objects" that we are destructive, and then it
would in turn have to tell the revision code that our
"--all" should include broken refs.
It's much simpler to just set a global for "dangerous"
operations that includes broken refs in all iterations.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5312: test object deletion code paths in a corrupted repository
When we are doing a destructive operation like "git prune",
we want to be extra careful that the set of reachable tips
we compute is valid. If there is any corruption or oddity,
we are better off aborting the operation and letting the
user figure things out rather than plowing ahead and
possibly deleting some data that cannot be recovered.
The tests here include:
1. Pruning objects mentioned only be refs with invalid
names. This used to abort prior to d0f810f (refs.c:
allow listing and deleting badly named refs,
2014-09-03), but since then we silently ignore the tip.
Likewise, we test repacking that can drop objects
(either "-ad", which drops anything unreachable,
or "-Ad --unpack-unreachable=<time>", which tries to
optimize out a loose object write that would be
directly pruned).
2. Pruning objects when some refs point to missing
objects. We don't know whether any dangling objects
would have been reachable from the missing objects. We
are better to keep them around, as they are better than
nothing for helping the user recover history.
3. Packed refs that point to missing objects can sometimes
be dropped. By itself, this is more of an annoyance
(you do not have the object anyway; even if you can
recover it from elsewhere, all you are losing is a
placeholder for your state at the time of corruption).
But coupled with (2), if we drop the ref and then go
on to prune, we may lose unrecoverable objects.
Note that we use test_might_fail for some of the operations.
In some cases, it would be appropriate to abort the
operation, and in others, it might be acceptable to continue
but taking the information into account. The tests don't
care either way, and check only for data loss.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The different index versions have different sha-1 checksums. Those
checksums are checked in t1700, which makes it fail when the test suite
is run with TEST_GIT_INDEX_VERSION=4. Fix it.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9158, t9161: fix broken &&-chain in git-svn tests
All of these cases are moderate since they would most probably not
lead to missed failing tests; either they would fail otherwise, or
fail a rm in test_when_finished only.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is special for several reasons:
It ends with a "true" statement, which should be a no-op.
It is not because the &&-chain is broken right before it.
Also, looking at what the test intended to test according to 7f578c5 (git-svn: --follow-parent now works on sub-directories of larger
branches, 2007-01-24)
it is not clear how it would achieve that with the given steps.
Amend the test to include the second svn id to be tested for, and
change the tested refs to the ones which are to be expected, and which
make the test pass.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This use of "||" fools --chain-lint into thinking the
&&-chain is broken (and indeed, it is somewhat broken; a
failure of update-index in these tests would show the patch
file, even if we never got to the part of the test where we
fed the patch to git-apply).
The extra blocks were there to include more debugging
output, but it hardly seems worth it; the user should know
which command failed (because git-apply will produce error
messages) and can look in the trash directory themselves.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>