If we want to use a hashfile on the temporary file for a lockfile, then
we need finalize_hashfile() to fully write the trailing hash but also keep
the file descriptor open.
Do this by adding a new CSUM_HASH_IN_STREAM flag along with a functional
change that checks this flag before writing the checksum to the stream.
This differs from previous behavior since it would be written if either
CSUM_CLOSE or CSUM_FSYNC is provided.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was an undocumented debugging aid that does not seem to
have come in handy in the past decade, judging from its lack
of mentions on the mailing list.
Let's drop it in the name of simplicity. This is morally a
revert of 3131b71301 (Add "--show-all" revision walker flag
for debugging, 2008-02-09), but note that I did leave in the
mapping of UNINTERESTING to "^" in get_revision_mark(). I
don't think this would be possible to trigger with the
current code, but it's the only sensible marker.
We'll skip the usual deprecation period because this was
explicitly a debugging aid that was never documented.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--show-all" revision option shows UNINTERESTING
commits. Some of these commits may be unparsed when we try
to show them (since we may or may not need to walk their
parents to fulfill the request).
Commit 3131b71301 (Add "--show-all" revision walker flag for
debugging, 2008-02-09) resolved this by just skipping
pretty-printing for commits without their object contents
cached, saying:
Because we now end up listing commits we may not even have been parsed
at all "show_log" and "show_commit" need to protect against commits
that don't have a commit buffer entry.
That was the easy fix to avoid the pretty-printer segfaulting,
but:
1. It doesn't work for all formats. E.g., --oneline
prints the oid for each such commit but not a trailing
newline, leading to jumbled output.
2. It only affects some commits, depending on whether we
happened to parse them or not (so if they were at the
tip of an UNINTERESTING starting point, or if we
happened to traverse over them, you'd see more data).
3. It unncessarily ties the decision to show the verbose
header to whether the commit buffer was cached. That
makes it harder to change the logic around caching
(e.g., if we could traverse without actually loading
the full commit objects).
These days it's safe to feed such a commit to the
pretty-print code. Since be5c9fb904 (logmsg_reencode: lazily
load missing commit buffers, 2013-01-26), we'll load it on
demand in such a case. So let's just always show the verbose
headers.
This does change the behavior of plumbing, but:
a. The --show-all option was explicitly introduced as a
debugging aid, and was never documented (and has rarely
even been mentioned on the list by git devs).
b. Avoiding the commits was already not deterministic due
to (2) above. So the caller might have seen full
headers for these commits anyway, and would need to be
prepared for it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/abort-clone-with-existing-dest' into maint
"git clone $there $here" is allowed even when here directory exists
as long as it is an empty directory, but the command incorrectly
removed it upon a failure of the operation.
* jk/abort-clone-with-existing-dest:
clone: do not clean up directories we didn't create
clone: factor out dir_exists() helper
t5600: modernize style
t5600: fix outdated comment about unborn HEAD
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
Merge branch 'jm/svn-pushmergeinfo-fix' into maint
"git svn dcommit" did not take into account the fact that a
svn+ssh:// URL with a username@ (typically used for pushing) refers
to the same SVN repository without the username@ and failed when
svn.pushmergeinfo option is set.
* jm/svn-pushmergeinfo-fix:
git-svn: fix svn.pushmergeinfo handling of svn+ssh usernames.
More abstraction of hash function from the codepath.
* bc/hash-algo:
hash: update obsolete reference to SHA1_HEADER
bulk-checkin: abstract SHA-1 usage
csum-file: abstract uses of SHA-1
csum-file: rename sha1file to hashfile
read-cache: abstract away uses of SHA-1
pack-write: switch various SHA-1 values to abstract forms
pack-check: convert various uses of SHA-1 to abstract forms
fast-import: switch various uses of SHA-1 to the_hash_algo
sha1_file: switch uses of SHA-1 to the_hash_algo
builtin/unpack-objects: switch uses of SHA-1 to the_hash_algo
builtin/index-pack: improve hash function abstraction
hash: create union for hash context allocation
hash: move SHA-1 macros to hash.h
The way "git reset --hard" reports the commit the updated HEAD
points at is made consistent with the way how the commit title is
generated by the other parts of the system. This matters when the
title is spread across physically multiple lines.
* tg/reset-hard-show-head-with-pretty:
reset --hard: make use of the pretty machinery
* ab/wildmatch-tests:
wildmatch test: mark test as EXPENSIVE_ON_WINDOWS
test-lib: add an EXPENSIVE_ON_WINDOWS prerequisite
wildmatch test: create & test files on disk in addition to in-memory
wildmatch test: perform all tests under all wildmatch() modes
wildmatch test: use test_must_fail, not ! for test-wildmatch
wildmatch test: remove dead fnmatch() test code
wildmatch test: use a paranoia pattern from nul_match()
wildmatch test: don't try to vertically align our output
wildmatch test: use more standard shell style
wildmatch test: indent with tabs, not spaces
Avoid mmapping small files while using packed refs (especially ones
with zero size, which would cause later munmap() to fail).
* kg/packed-ref-cache-fix:
packed_ref_cache: don't use mmap() for small files
load_contents(): don't try to mmap an empty file
packed_ref_iterator_begin(): make optimization more general
find_reference_location(): make function safe for empty snapshots
create_snapshot(): use `xmemdupz()` rather than a strbuf
struct snapshot: store `start` rather than `header_len`
* en/merge-recursive-fixes:
merge-recursive: add explanation for src_entry and dst_entry
merge-recursive: fix logic ordering issue
Tighten and correct a few testcases for merging and cherry-picking
Push the submodule version of collision-detecting SHA-1 hash
implementation a bit harder on builders.
* ab/sha1dc-build:
sha1dc_git.h: re-arrange an ifdef chain for a subsequent change
Makefile: under "make dist", include the sha1collisiondetection submodule
Makefile: don't error out under DC_SHA1_EXTERNAL if DC_SHA1_SUBMODULE=auto
Subsequent patches will introduce file formats that make use of a fanout
array and a sorted table containing hashes, just like packfiles.
Refactor the hash search in packfile.c into its own function, so that
those patches can make use of it as well.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 628522ec1439 ("sha1-lookup: more memory efficient search in
sorted list of SHA-1", 2008-04-09), a different algorithm for searching
a sorted list was introduced, together with a set of log statements
guarded by GIT_DEBUG_LOOKUP that are invoked both when using that
algorithm and when using the existing binary search. Those log
statements was meant for experiments and debugging, but with the removal
of the aforementioned different algorithm in commit f1068efefe6d
("sha1_file: drop experimental GIT_USE_LOOKUP search", 2017-08-09),
those log statements are probably no longer necessary.
Remove those statements.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sg/travis-linux32-sanity:
travis-ci: don't fail if user already exists on 32 bit Linux build job
travis-ci: don't run the test suite as root in the 32 bit Linux build
travis-ci: don't repeat the path of the cache directory
travis-ci: use 'set -e' in the 32 bit Linux build job
travis-ci: use 'set -x' for the commands under 'su' in the 32 bit Linux build
The sequencer infrastructure is shared across "git cherry-pick",
"git rebase -i", etc., and has always spawned "git commit" when it
needs to create a commit. It has been taught to do so internally,
when able, by reusing the codepath "git commit" itself uses, which
gives performance boost for a few tens of percents in some sample
scenarios.
* pw/sequencer-in-process-commit:
sequencer: run 'prepare-commit-msg' hook
t7505: add tests for cherry-pick and rebase -i/-p
t7505: style fixes
sequencer: assign only free()able strings to gpg_sign
sequencer: improve config handling
t3512/t3513: remove KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1
sequencer: try to commit without forking 'git commit'
sequencer: load commit related config
sequencer: simplify adding Signed-off-by: trailer
commit: move print_commit_summary() to libgit
commit: move post-rewrite code to libgit
Add a function to update HEAD after creating a commit
commit: move empty message checks to libgit
t3404: check intermediate squash messages
* nd/shared-index-fix:
read-cache: don't write index twice if we can't write shared index
read-cache.c: move tempfile creation/cleanup out of write_shared_index
read-cache.c: change type of "temp" in write_shared_index()
The split-index mode had a few corner case bugs fixed.
* tg/split-index-fixes:
travis: run tests with GIT_TEST_SPLIT_INDEX
split-index: don't write cache tree with null oid entries
read-cache: fix reading the shared index for other repos
The http tracing code, often used to debug connection issues,
learned to redact potentially sensitive information from its output
so that it can be more safely sharable.
* jt/http-redact-cookies:
http: support omitting data from traces
http: support cookie redaction when tracing
The tracing machinery learned to report tweaking of environment
variables as well.
* nd/trace-with-env:
run-command.c: print new cwd in trace_run_command()
run-command.c: print env vars in trace_run_command()
run-command.c: print program 'git' when tracing git_cmd mode
run-command.c: introduce trace_run_command()
trace.c: move strbuf_release() out of print_trace_line()
trace: avoid unnecessary quoting
sq_quote_argv: drop maxlen parameter
* ks/submodule-doc-updates:
Doc/git-submodule: improve readability and grammar of a sentence
Doc/gitsubmodules: make some changes to improve readability and syntax
The machinery to clone & fetch, which in turn involves packing and
unpacking objects, have been told how to omit certain objects using
the filtering mechanism introduced by the jh/object-filtering
topic, and also mark the resulting pack as a promisor pack to
tolerate missing objects, taking advantage of the mechanism
introduced by the jh/fsck-promisors topic.
* jh/partial-clone:
t5616: test bulk prefetch after partial fetch
fetch: inherit filter-spec from partial clone
t5616: end-to-end tests for partial clone
fetch-pack: restore save_commit_buffer after use
unpack-trees: batch fetching of missing blobs
clone: partial clone
partial-clone: define partial clone settings in config
fetch: support filters
fetch: refactor calculation of remote list
fetch-pack: test support excluding large blobs
fetch-pack: add --no-filter
fetch-pack, index-pack, transport: partial clone
upload-pack: add object filtering for partial clone
In preparation for implementing narrow/partial clone, the machinery
for checking object connectivity used by gc and fsck has been
taught that a missing object is OK when it is referenced by a
packfile specially marked as coming from trusted repository that
promises to make them available on-demand and lazily.
* jh/fsck-promisors:
gc: do not repack promisor packfiles
rev-list: support termination at promisor objects
sha1_file: support lazily fetching missing objects
introduce fetch-object: fetch one promisor object
index-pack: refactor writing of .keep files
fsck: support promisor objects as CLI argument
fsck: support referenced promisor objects
fsck: support refs pointing to promisor objects
fsck: introduce partialclone extension
extension.partialclone: introduce partial clone extension
The build procedure for perl/ part has been greatly simplified by
weaning ourselves off of MakeMaker.
* ab/simplify-perl-makefile:
perl: treat PERLLIB_EXTRA as an extra path again
perl: avoid *.pmc and fix Error.pm further
Makefile: replace perl/Makefile.PL with simple make rules
We moved away from SHA1_HEADER to a preprocessor if chain, but didn't
update the comment discussing the platform defines. Update this comment
so it reflects the current state of our codebase.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
353d84c537 (coccicheck: make transformation for strbuf_addf(sb, "...")
more precise) added a check to avoid transforming calls with format
strings which contain percent signs, as that would change the result.
It uses embedded Python code for that. Simplify this rule by using the
regular expression matching operator instead.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reset --hard currently uses its own logic for printing the first line of
the commit message in its output. Instead of just using the first line,
use the pretty machinery to create the output.
In addition to the easier to follow code, this makes the output more
consistent with other commands that print the title of the commit, such
as 'git commit --oneline' or 'git checkout', which both use
'pp_commit_easy()' with the CMIT_FMT_ONELINE modifier.
It is a slight change of the output if the second line of the commit
message is not a blank line, i.e. if the commit message is
foo
bar
previously we would print "HEAD is now at 000000 foo", while after
this change we print "HEAD is now at 000000 foo bar", same as 'git log
--oneline' shows "000000 foo bar".
So this does make the output more consistent with other commands, and
'reset' is a porcelain command, so nobody should be parsing the output
in scripts.
The current behaviour dates back to 0e5a7faa3a ("Make "git reset" a
builtin.", 2007-09-11), so I assume (without digging into the old
codebase too much) that the logic was implemented because there was
no convenience function such as 'pp_commit_easy' that would do this
already.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is much easier to diff the output against a previous
one when the fields are sorted.
Helped-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to use the aggregate script
on the command line when one wants to get the
"environment" fields set in the codespeed output.
Previously setting GIT_REPO_NAME was needed
for this purpose.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert various uses of direct calls to SHA-1 and 20- and 40-based
constants to use the_hash_algo instead. Don't yet convert the on-disk
data structures, which will be handled in a future commit.
Adjust some comments so as not to refer explicitly to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-write: switch various SHA-1 values to abstract forms
Convert various uses of hardcoded 20- and 40-based numbers to use
the_hash_algo, along with direct calls to SHA-1. Adjust the names of
variables to refer to "hash" instead of "sha1".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-check: convert various uses of SHA-1 to abstract forms
Convert various explicit calls to use SHA-1 functions and constants to
references to the_hash_algo. Make several strings more generic with
respect to the hash algorithm used.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/index-pack: improve hash function abstraction
Convert several uses of unsigned char [20] to struct object_id and
convert various hard-coded constants and uses of SHA-1 functions to use
the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In various parts of our code, we want to allocate a structure
representing the internal state of a hash algorithm. The original
implementation of the hash algorithm abstraction assumed we would do
that using heap allocations, and added a context size element to struct
git_hash_algo. However, most of the existing code uses stack
allocations and conversion would needlessly complicate various parts of
the code. Add a union for the purpose of allocating hash contexts on
the stack and a typedef for ease of use. Use this union for defining
the init, update, and final functions to avoid casts. Remove the ctxsz
element for struct git_hash_algo, which is no longer very useful.
This does mean that stack allocations will grow slightly as additional
hash functions are added, but this should not be a significant problem,
since we don't allocate many hash contexts. The improved usability and
benefits from avoiding dynamic allocation outweigh this small downside.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the other code dealing with SHA-1 and other hashes is located in
hash.h, which is in turn loaded by cache.h. Move the SHA-1 macros to
hash.h as well, so we can use them in additional hash-related items in
the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace: measure where the time is spent in the index-heavy operations
All the known heavy code blocks are measured (except object database
access). This should help identify if an optimization is effective or
not. An unoptimized git-status would give something like below:
`fnmatch(3)` is a great mention if the intended audience is
programmers. For normal users it's probably better to spell out what
a shell glob is.
This paragraph is updated to roughly tell (or remind) what the main
wildcards are supposed to do. All the details are still hidden away
behind the `fnmatch(3)` wall because bringing the whole specification
here may be too much.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the newly added test which creates test files on-disk as
EXPENSIVE_ON_WINDOWS. According to [1] it takes almost ten minutes to
run this test file on Windows after this recent change, but just a few
seconds on Linux as noted in my [2].
This could be done faster by exiting earlier, however by using this
pattern we'll emit "skip" lines for each skipped test, making it clear
we're not running a lot of them in the TAP output, at the cost of some
overhead.
test-lib: add an EXPENSIVE_ON_WINDOWS prerequisite
Add an EXPENSIVE_ON_WINDOWS prerequisite to mark those tests which are
very expensive to run on Windows, but cheap elsewhere.
Certain tests that heavily stress the filesystem or run a lot of shell
commands are disproportionately expensive on Windows, this
prerequisite will later be used by a tests that runs in 4-8 seconds on
a modern Linux system, but takes almost 10 minutes on Windows.
There's no reason to skip such tests by default on other platforms,
but Windows users shouldn't need to wait around while they finish.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wildmatch test: create & test files on disk in addition to in-memory
There has never been any full roundtrip testing of what git-ls-files
and other commands that use wildmatch() actually do, rather we've been
satisfied with just testing the underlying C function.
Due to git-ls-files and friends having their own codepaths before they
call wildmatch() there's sometimes differences in the behavior between
the two. Even when we test for those (as with [1]), there was no one
place where you can review how these two modes differ.
Now there is. We now attempt to create a file called $haystack and
match $needle against it for each pair of $needle and $haystack that
we were passing to test-wildmatch.
If we can't create the file we skip the test. This ensures that we can
run this on all platforms and not maintain some infinitely growing
whitelist of e.g. platforms that don't support certain characters in
filenames.
A notable exception to this is Windows, where due to the reasons
explained in [2] the shellscript emulation layer might fake the
creation of a file such as "*", and "test -e" for it will succeed
since it just got created with some character that maps to "*", but
git ls-files won't be fooled by this.
Thus we need to skip creating certain filenames entirely on Windows,
the list here might be overly aggressive. I don't have access to a
Windows system to test this.
As a result of doing these tests we can now see the cases where these
two ways of testing wildmatch differ:
* Creating a file called 'a[]b' and running ls-files 'a[]b' will show
that file, but wildmatch("a[]b", "a[]b") will not match
* wildmatch() won't match a file called \ against \, but ls-files
will.
* `git --glob-pathspecs ls-files 'foo**'` will match a file
'foo/bba/arr', but wildmatch won't, however pathmatch will.
This seems like a bug to me, the two are otherwise equivalent as
these tests show.
This also reveals the case discussed in [1], since 2.16.0 '' is now an
error as far as ls-files is concerned, but wildmatch() itself happily
accepts it.
1. 9e4e8a64c2 ("pathspec: die on empty strings as pathspec",
2017-06-06)
wildmatch test: perform all tests under all wildmatch() modes
Rewrite the wildmatch() test suite so that each test now tests all
combinations of the wildmatch() WM_CASEFOLD and WM_PATHNAME flags.
Before this change some test inputs were not tested on
e.g. WM_PATHNAME. Now the function is stress tested on all possible
inputs, and for each input we declare what the result should be if the
mode is case-insensitive, or pathname matching, or case-sensitive or
not matching pathnames.
Also before this change, nothing was testing case-insensitive
non-pathname matching, so I've added that to test-wildmatch.c and made
use of it.
This yields a rather scary patch, but there are no functional changes
here, just more test coverage. Some now-redundant tests were deleted
as a result of this change, since they were now duplicating an earlier
test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wildmatch test: use test_must_fail, not ! for test-wildmatch
Use of ! should be reserved for non-git programs that are assumed not
to fail, see README. With this change only
t/t0110-urlmatch-normalization.sh is still using this anti-pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the unused fnmatch() test parameter from the wildmatch
test. The code that used to test this was removed in 70a8fc999d ("stop
using fnmatch (either native or compat)", 2014-02-15).
As a --word-diff shows the only change to the body of the tests is the
removal of the second out of four parameters passed to match().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wildmatch test: use a paranoia pattern from nul_match()
Use a pattern from the nul_match() function in t7008-grep-binary.sh to
make sure that we don't just fall through to the "else" if there's an
unknown parameter.
This is something I added in commit 77f6f4406f ("grep: add a test
helper function for less verbose -f \0 tests", 2017-05-20) to grep
tests, which were modeled on these wildmatch tests, and I'm now
porting back to the original wildmatch tests.
I am not using the "say '...'; exit 1" pattern from t0000-basic.sh
because if I fail I want to run the rest of the tests (unless under
-i), and doing this makes sure we do that and don't exit right away
without fully reporting our errors.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wildmatch test: don't try to vertically align our output
Don't try to vertically align the test output, which is futile anyway
under the TAP output where we're going to be emitting a number for
each test without aligning the test count.
This makes subsequent changes of mine where I'm not going to be
aligning this output as I add new tests easier.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: don't fail if user already exists on 32 bit Linux build job
The 32 bit Linux build job runs in a Docker container, which lends
itself to running and debugging locally, too. Especially during
debugging one usually doesn't want to start with a fresh container
every time, to save time spent on installing a bunch of dependencies.
However, that doesn't work quite smootly, because the script running
in the container always creates a new user, which then must be removed
every time before subsequent executions, or the build script fails.
Make this process more convenient and don't try to create that user if
it already exists and has the right user ID in the container, so
developers don't have to bother with running a 'userdel' each time
before they run the build script.
The build job on Travis CI always starts with a fresh Docker
container, so this change doesn't make a difference there.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: don't run the test suite as root in the 32 bit Linux build
Travis CI runs the 32 bit Linux build job in a Docker container, where
all commands are executed as root by default. Therefore, ever since
we added this build job in 88dedd5e7 (Travis: also test on 32-bit
Linux, 2017-03-05), we have a bit of code to create a user in the
container matching the ID of the host user and then to run the test
suite as this user. Matching the host user ID is important, because
otherwise the host user would have no access to any files written by
processes running in the container, notably the logs of failed tests
couldn't be included in the build job's trace log.
Alas, this piece of code never worked, because it sets the variable
holding the user name ($CI_USER) in a subshell, meaning it doesn't
have any effect by the time we get to the point to actually use the
variable to switch users with 'su'. So all this time we were running
the test suite as root.
Reorganize that piece of code in 'ci/run-linux32-build.sh' a bit to
avoid that problematic subshell and to ensure that we switch to the
right user. Furthermore, make the script's optional host user ID
option mandatory, so running the build accidentally as root will
become harder when debugging locally. If someone really wants to run
the test suite as root, whatever the reasons might be, it'll still be
possible to do so by explicitly passing '0' as host user ID.
Finally, one last catch: since commit 7e72cfcee (travis-ci: save prove
state for the 32 bit Linux build, 2017-12-27) the 'prove' test harness
has been writing its state to the Travis CI cache directory from
within the Docker container while running as root. After this patch
'prove' will run as a regular user, so in future build jobs it won't
be able overwrite a previously written, still root-owned state file,
resulting in build job failures. To resolve this we should manually
delete caches containing such root-owned files, but that would be a
hassle. Instead, work this around by changing the owner of the whole
contents of the cache directory to the host user ID.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: don't repeat the path of the cache directory
Some of our 'ci/*' scripts repeat the name or full path of the Travis
CI cache directory, and the following patches will add new places
using that path.
Use a variable to refer to the path of the cache directory instead, so
it's hard-coded only in a single place.
Pay extra attention to the 32 bit Linux build: it runs in a Docker
container, so pass the path of the cache directory from the host to
the container in an environment variable. Note that an environment
variable passed this way is exported inside the container, therefore
its value is directly available in the 'su' snippet even though that
snippet is single quoted. Furthermore, use the variable in the
container only if it's been assigned a non-empty value, to prevent
errors when someone is running or debugging the Docker build locally,
because in that case the variable won't be set as there won't be any
Travis CI cache.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: use 'set -e' in the 32 bit Linux build job
The script 'ci/run-linux32-build.sh' running inside the Docker
container of the 32 bit Linux build job uses an && chain to break the
build if one of the commands fails. This is problematic for two
reasons:
- The && chain is broken, because there is this in the middle:
Luckily it is broken in a way that it didn't lead to false
successes. If installing dependencies fails, then the rest of the
first && chain is skipped and execution resumes after the ||
operator. At that point $HOST_UID is still unset, causing
'useradd' to error out with "invalid user ID 'ci'", which in turn
causes the second && chain to abort the script and thus break the
build.
- All other 'ci/*' scripts use 'set -e' to break the build if one of
the commands fails. This inconsistency among these scripts is
asking for trouble: I forgot about the && chain more than once
while working on this patch series.
Enable 'set -e' for the whole script and for the commands executed
under 'su' as well.
While touching every line in the 'su' command block anyway, change
their indentation to use a tab instead of spaces.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>