Oh, I hate to do this but I ended up merging big usage string
cleanups from Fredrik, git-am enhancements that made a lot of
sense for non mbox users from HPA, and rebase changes (done
independently by me and Lukas) among other things, so git is
still in perpetual state of 1.0rc. 1.0 will probably be next
Wednesday, but who knows.
git rebase loses author name/email if given bad email address
If GIT_AUTHOR_EMAIL is of a certain form, `git rebase master' will blow
away the author name and email when fast-forward merging commits. I
have not tracked it down, but here is a testcase that demonstrates the
behavior.
Signed-off-by: Amos Waterland <apw@us.ibm.com> Acked-by: Michal Ostrowski <mostrows@watson.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix bugs in git-rebase wrt rebasing another branch than
the current HEAD, rebasing with a dirty working dir,
and rebasing a proper decendant of the target branch.
[jc: with a bit of hand-merging]
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
An isolated developer could have a local-only e-mail, which will
be stripped out by mailinfo because it lacks '@'. Define a
fallback parser to accomodate that.
At the same time, reject authorless patch in git-am.
rebase: do not get confused in fast-forward situation.
When switching to another branch and rebasing it in a one-go, it
failed to update the variable that holds the branch head, and
did not detect fast-forward situation correctly.
Recommend git over ssh direct to master.kernel.org, instead of
going over rsync to public machines, since this is meant to be a
procedure for kernel subsystem maintainers.
There were some problems with the usage message clean-up patch
series. I hadn't realised that subdirectory aware scripts can't source
git-sh-setup. I propose that we change this and let the scripts which
are subdirectory aware set a variable, SUBDIRECTORY_OK, before they
source git-sh-setup.
The scripts will also set USAGE and possibly LONG_USAGE before they
source git-sh-setup. If LONG_USAGE isn't set it defaults to USAGE.
If we go this way it's easy to catch --help in git-sh-setup, print the
(long) usage message to stdout and exit cleanly. git-sh-setup can
define a 'usage' shell function which can be called by the scripts to
print the short usage string to stderr and exit non-cleanly. It will
also be easy to change $0 to basename $0 or something else, if would
like to do that sometime in the future.
What follows is a patch to convert a couple of the commands to this
style. If it's ok with everyone to do it this way I will convert the
rest of the scripts too.
[jc: thrown in to proposed updates queue for comments.]
This allows git-am to accept single-message files as well as mboxes.
Unlike the previous version, this one doesn't need to be explicitly told
which one it is; rather, it looks to see if the first line is a From
line and uses it to select mbox mode or not.
I moved the logic to do all this into git-mailsplit, which got a new
user interface as result, although the old interface is still available
for backwards compatibility.
[jc: applied with two obvious fixes.]
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
* git fetch --tags
* Use of "git push" as a one-man distributed development vehicle.
* Show example of remotes file for pulling and pushing.
* Annotate git-shell setup.
* Using Carl's update hook in a CVS-style shared repository.
Make git-send-pack exit with error when some refs couldn't be pushed out
In case some refs couldn't be pushed out due to an error (mostly the
not-a-proper-subset error), make git-send-pack exit with non-zero status
after the push is over (that is, it still tries to push out the rest
of the refs).
[jc: I adjusted a test for this change.]
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Although "git-merge" is advertised as the end-user level command
(instead of being a "git-pull" backend), it was not prepared to
take tag objects that point at commits and barfed when fed one.
Sanitize the input while we validate them, for which we already
have a loop.
git-clone: tell the user a bit more about clone-pack failure.
When clone-pack has trouble with the remote, it dies unfriendly
"EOF" error message. We cannot tell the reason why it failed
from the local end; it could be that the repository did not
exist, or configured not to serve over git-daemon, or a network
failure. At least, saying clone-pack failed makes it a bit more
meaningful.
I am not convinced yet that removing the newly created directory
is the right thing to do, so this commit leaves the new
directory behind.
The initial section of tutorial was too heavy on internal
workings for the first-time readers, so rewrite the introductory
section of git(7) to start with "not learning core git commands"
section and refer them to README to grasp the basic concepts,
then Everyday to give overview with task/role oriented examples
for minimum set of commands, and finally the tutorial.
Also add to existing note in the tutorial that many too
technical descriptions can be skipped by a casual reader.
I initially started to review the tutorial, with the objective
of ripping out the detailed technical information altogether,
but I found that the level of details in the initial couple of
sections that talk about refs and the object database in a
hands-on fashion was about rigth, and left all of them there. I
feel that reading about fsck-index and repack is too abstract
without being aware of these directories and files.
Delta computation with an empty blob used to punt and returned NULL.
This commit allows creation with empty blob; all combination of
empty->empty, empty->something, and something->empty are allowed.
This adds a couple of tests to cover the following renaming
merge cases:
- one side renames and the other side does not, with and without
content conflicts.
- both side rename to the same path, with and without content
conflicts.
The test setup also prepares a case in which both side rename to
different destination, but currently the code collapses these
destination paths and removes the original path, which may be
wrong. The outcome of this case is not checked by the tests in
this round.
Fredrik points out there is a useful wrapper runProgram() used
everywhere that we can use to feed input into subprocess. Use
it to catch errors from the subprocess; it is a good cleanup as
well.
merge-recursive: leave unmerged entries in the index.
This does two things.
- When one branch renamed and the other branch did not, the
resulting half-merged file in the working tree used to swap
branches around and showed as if renaming side was "ours".
This was confusing and inconsistent (even though the conflict
markers were marked with branch names, it was not a good
enough excuse). This changes the order of arguments to
mergeFile in such a case to make sure we always see "our"
change between <<< and ===, and "their" change between ===
and >>>.
- When both branches renamed to the same path, and when one
branch renamed and the other branch did not, we attempt
mergeFile. When this automerge conflicted, we used to
collapse the index. Now we use update-index --index-info
to inject higher stage entries to leave the index in unmerged
state for these two cases.
What this still does _not_ do is to inject unmerged state into
the index when the structural changes conflict. I have not
thought things through what to do in each case yet, but the
cases this commit cover are the most common ones, so this would
be a good start.
People seem to be getting test failure from t6021 not becuase
git is faulty but because they forgot to install "merge". Check
this and other trivial pilot errors in the first test.
use safe_pipe_capture() or system() over backticks where
shellquoting may have been necessary.
More changes planned, so I'm not touching the parts I'm
planning on replacing entirely.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
This is to catch an error where tests are run without first
building what are being tested. Relying on prefixing $PATH with
the build directory and expect that the PATH mechanism would
find what we just built would silently run an already installed
binaries from the PATH.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-prune: never lose objects reachable from our refs.
Explicit <head> arguments to git-prune replaces, instead of
extends, the list of heads used for reachability analysis by
fsck-objects. By giving a subset of heads by mistake, objects
reachable only from other heads can be removed, resulting in a
corrupted repository.
This commit stops replacing the list of heads, and makes the
command line arguments to add to them instead for safety.
This is a companion patch to e23eff8be92a2a2cb66b53deef020063cff285ed
commit. The same logic, the same rationale that a comparison
function that returns an int should not just compute a ptrdiff_t
and return it.
Not replacing but always including our own refs may be more
desirable (and unarguably much safer), but at the same time I
have a suspicion that that might be forbidding a useful usage I
haven't thought of, so...
Documentation/git-format-patch.txt: Add --signoff, --check, and long option-names.
The documentation was lacking descriptions for the --signoff and --check
options to git-format-patch. It was also missing the following long
option-names: --output-directory (-o), --numbered (-n), --keep-subject
(-k), --author (-a), --date (-d), and --mbox (-m).
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
Add documentation for git-revert and git-cherry-pick.
* Added the -e option to the documentation of git-cherry-pick.
* Added the -e and --no-commit option to git-revert.
* Removed redundant case expression for -n as --no-edit (already taken by
--no-commit).
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitk: Work around Tcl's non-standard names for encodings
This uses a table of encoding names and aliases distilled from
http://www.iana.org/assignments/character-sets plus some heuristics
to convert standard encoding names to ones that Tcl recognizes.
update-index: allow --index-info to add higher stages.
The new merge world order tells the merge strategies to leave
the cache unmerged and store the automerge result in the working
tree if automerge is not clean. This was done for the resolve
strategy and recursive strategy when no rename is involved, but
recording a conflicting merge in the rename case could not
easily be done by the recursive strategy.
This commit adds a new input format, in addition to the exsting
two, to "update-index --index-info".
(1) mode SP sha1 TAB path
The first format is what "git-apply --index-info"
reports, and used to reconstruct a partial tree
that is used for phony merge base tree when falling
back on 3-way merge.
(2) mode SP type SP sha1 TAB path
The second format is to stuff git-ls-tree output
into the index file.
(3) mode SP sha1 SP stage TAB path
This format is to put higher order stages into the
index file and matches git-ls-files --stage output.
To place a higher stage entry to the index, the path should
first be removed by feeding a mode=0 entry for the path, and
then feeding necessary input lines in the (3) format.
The first line of the input feeds 0 as the mode to remove the
path; the SHA1 does not matter as long as it is well formatted.
Then the second and third line feeds stage 1 and stage 2 entries
for that path. After the above, we would end up with this:
On AIX, there is no -n option to the system's echo. Instead,
it needs the '\c' control character. We could replace
echo -n "foo"
with
echo -e "foo\c"
but printf is recommended by most man pages. Tested on AIX
5.3, Solaris 8, and Debian.
[jc: futureproofed two instances that uses variable with '%s'
so later feeding different messages would not break things too
easily; others are emitting literal so whoever changes the
literal ought to notice more easily so they are safe.]
Signed-off-by: E. Jason Riedy <ejr@cs.berkeley.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
> The code looks wrong. It assumes that pointers are no larger than ints.
> If pointers are larger than ints, the code does not necessarily compute
> a consistent ordering and qsort is allowed to do whatever it wants.
>
> Morten
>
> static int compare_object_pointers(const void *a, const void *b)
> {
> const struct object * const *pa = a;
> const struct object * const *pb = b;
> return *pa - *pb;
> }
Added an AIX clause in the Makefile; that clause likely
will be wrong for any AIX pre-5.2, but I can only test
on 5.3. mailinfo.c was missing the compat header file,
and convert-objects.c needs to define a specific
_XOPEN_SOURCE as well as _XOPEN_SOURCE_EXTENDED.
Signed-off-by: E. Jason Riedy <ejr@cs.berkeley.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-merge-one-file: resurrect leading path creation.
Since we do not use git-update-index followed by
git-checkout-index -u to create the half-merged file on
conflicting case anymore, we need to make sure the leading
directories are created here.
Maybe a better solution would be to allow update-index to add to
higher stage, and checkout-index to extract from such, but that
is a change slightly bigger than I would like to have so close
to 1.0, so this should do for now.