* rs/strbuf-expand:
remove the unused files interpolate.c and interpolate.h
daemon: deglobalize variable 'directory'
daemon: inline fill_in_extra_table_entries()
daemon: use strbuf_expand() instead of interpolate()
merge-recursive: use strbuf_expand() instead of interpolate()
add strbuf_expand_dict_cb(), a helper for simple cases
* mv/clone-strbuf:
builtin_clone: use strbuf in cmd_clone()
builtin-clone: use strbuf in clone_local() and copy_or_link_directory()
builtin-clone: use strbuf in guess_dir_name()
* ph/send-email:
git send-email: ask less questions when --compose is used.
git send-email: add --annotate option
git send-email: interpret unknown files as revision lists
git send-email: make the message file name more specific.
* maint:
sha1_file.c: resolve confusion EACCES vs EPERM
sha1_file: avoid bogus "file exists" error message
git checkout: don't warn about unborn branch if -f is already passed
bash: offer refs instead of filenames for 'git revert'
bash: remove dashed command leftovers
git-p4: fix keyword-expansion regex
fast-export: use an unsorted string list for extra_refs
Add new testcase to show fast-export does not always exports all tags
An earlier commit 916d081 (Nicer error messages in case saving an object
to db goes wrong, 2006-11-09) confused EACCES with EPERM, the latter of
which is an unlikely error from mkstemp().
This avoids the following misleading error message:
error: unable to create temporary sha1 filename ./objects/15: File exists
mkstemp can fail for many reasons, one of which, ENOENT, can occur if
the directory for the temp file doesn't exist. create_tmpfile tried to
handle this case by always trying to mkdir the directory, even if it
already existed. This caused errno to be clobbered, so one cannot tell
why mkstemp really failed, and it truncated the buffer to just the
directory name, resulting in the strange error message shown above.
Note that in both occasions that I've seen this failure, it has not been
due to a missing directory, or bad permissions, but some other, unknown
mkstemp failure mode that did not occur when I ran git again. This code
could perhaps be made more robust by retrying mkstemp, in case it was a
transient failure.
Signed-off-by: Joey Hess <joey@kitenet.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout: don't warn about unborn branch if -f is already passed
I think it's unnecessary to warn that the checkout has been forced due to an
unborn current branch if -f has been explicitly passed. For one project, I am
using git-new-workdir to create workdirs from a bare repository whose HEAD is
set to an unborn branch, and this warning started to irritate me.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash: offer refs instead of filenames for 'git revert'
The completion script for 'git revert' currently offers options and
filenames. However, 'git revert' doesn't take any filenames from the
command line, but a single commit. Therefore, it's more sane to offer
refs instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it's handy to complete full refs, e.g. the user has some
refs outside of refs/{heads,remotes,tags} or the user wants to
complete some git command's special refs (like 'git show
refs/bisect/bad').
To do that, we check whether the ref to be completed starts with
'refs/' or is 'refs' (to reduce the risk of matching 'refs-'). If it
does, then we offer full refs for completion; otherwise everything
works as usual.
This way the impact on the common case is fairly small (hopefully not
many users have branches or tags starting with 'refs'), and in the
special case the cost of typing out 'refs' is bearable.
While at it, also remove the unused 'cmd' variable from '__git_refs'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5a625b07 (bash: remove fetch, push, pull dashed form leftovers,
2008-10-03) did that already, but there were still some git-cmd left
here and there.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
I figured the sections might as well be in some order, so I chose alphabetical
but with "core" at the beginning. This should help people add new variables
in the right places.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9129-git-svn-i18n-commitencoding: Make compare_svn_head_with() compatible with OSX sed
The sed call used in compare_svn_head_with() uses the + quantifier, which
is not supported in the OSX version of sed. It is replaced by the
equivalent \{1,\}.
Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original intention of 72909be (Add diff-option --ext-diff, 2007-06-30)
was to optionally allow the use of external diff viewer in "git log"
family (while keeping them disabled by default). It exposed the "allow
external diff" bit to the UI, but forgot to adjust the "git diff" codepath
that was set up to always allow use of the external diff viewer.
Noticed by Nazri Ramliy; tests by René Scharfe squashed in.
Merge branch 'for-junio' of git://source.winehq.org/~julliard/git/git
* 'for-junio' of git://source.winehq.org/~julliard/git/git:
git.el: Allow to commit even if there are no marked files.
git.el: Add possibility to mark files directly in git-update-status-files.
git.el: Add an insert file command.
git.el: Never clear the status buffer, only update the files.
git.el: Fix git-amend-commit to support amending an initial commit.
git.el: Properly handle merge commits in git-amend-commit.
git.el: Simplify handling of merge heads in the commit log-edit buffer.
git.el: Remove the env parameter in git-call-process and git-call-process-string.
git.el: Improve error handling for commits.
bisect: teach "skip" to accept special arguments like "A..B"
The current "git bisect skip" syntax is "git bisect skip [<rev>...]"
so it's already possible to skip a range of revisions using
something like:
$ git bisect skip $(git rev-list A..B)
where A and B are the bounds of the range we want to skip.
This patch teaches "git bisect skip" to accept:
$ git bisect skip A..B
as an abbreviation for the former command.
This is done by checking each argument to see if it contains two
dots one after the other ('..'), and by expending it using
"git rev-list" if that is the case.
Note that this patch will not make "git bisect skip" accept all
that "git rev-list" accepts, as things like "^A B" for exemple
will not work. But things like "A B..C D E F.. ..G H...I" should
work as expected.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the global variable 'directory' and pass it as a parameter of
the two functions that use it instead, (almost) restoring their
interface to how it was before 49ba83fb67d9e447b86953965ce5f949c6a93b81.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having fill_in_extra_table_entries() as a separate function has no
advantage -- a function with no parameters and return values might as
well be an anonymous block of code. Its name still refers to the table
of interpolate() which has been removed earlier, so it's better to
inline it at its only call site.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add strbuf_expand_dict_cb(), a helper for simple cases
The new callback function strbuf_expand_dict_cb() can be used together
with strbuf_expand() if there is only a small number of placeholders
for static replacement texts. It expects its dictionary as an array of
placeholder+value pairs as context parameter, terminated by an entry
with the placeholder member set to NULL.
The new helper is intended to aid converting the remaining calls of
interpolate(). strbuf_expand() is smaller, more flexible and can be
used to go faster than interpolate(), so it should replace the latter.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-export: use an unsorted string list for extra_refs
The list extra_refs contains tags and the objects referenced by them,
so that they can be handled at the end. When a tag references a
commit, that commit is added to the list using the same name.
Also, the function handle_tags_and_duplicates() relies on the order
the items were added to extra_refs, so clearly we do not want to
use a sorted list here.
Noticed by Miklos Vajna.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids the following misleading error message:
error: unable to create temporary sha1 filename ./objects/15: File exists
mkstemp can fail for many reasons, one of which, ENOENT, can occur if
the directory for the temp file doesn't exist. create_tmpfile tried to
handle this case by always trying to mkdir the directory, even if it
already existed. This caused errno to be clobbered, so one cannot tell
why mkstemp really failed, and it truncated the buffer to just the
directory name, resulting in the strange error message shown above.
Note that in both occasions that I've seen this failure, it has not been
due to a missing directory, or bad permissions, but some other, unknown
mkstemp failure mode that did not occur when I ran git again. This code
could perhaps be made more robust by retrying mkstemp, in case it was a
transient failure.
Signed-off-by: Joey Hess <joey@kitenet.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
compat/mingw.c: Teach mingw_rename() to replace read-only files
On POSIX, rename() can replace files that are not writable. On Windows,
however, read-only files cannot be replaced without additional efforts:
We have to make the destination writable first.
Since the situations where the destination is read-only are rare, we do not
make the destination writable on every invocation, but only if the first
try to rename a file failed with an "access denied" error.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix deletion of last character in levenshtein distance
Without this change, "git tags" will not suggest "git tag"
(it will only suggest "git status"), and "git statusx" will
not suggest anything.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git.el: Simplify handling of merge heads in the commit log-edit buffer.
Use a single Merge: header instead of one Parent: header for each
parent, and don't list the current HEAD as a merged head. Support
symbolic references too.
Pass the verbose mode parameter to the underlying fetch command.
$ ./git remote -v update
Updating origin
From git://git.kernel.org/pub/scm/git/git
= [up to date] html -> origin/html
= [up to date] maint -> origin/maint
= [up to date] man -> origin/man
= [up to date] master -> origin/master
= [up to date] next -> origin/next
= [up to date] pu -> origin/pu
= [up to date] todo -> origin/todo
Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the threaded index preloading case, we must be sure to always use the
CE_MATCH_RACY_IS_DIRTY flag when calling ie_match_stat(), in order to make
sure that we only ever look at the stat() data, and don't try to do
anything fancy.
Because most of git internals are not thread-safe, and must not be called
in parallel.
Otherwise, what happens is that if the timestamps indicate that an entry
_might_ be dirty, we might start actually comparing filesystem data with
the object database. And we mustn't do that, because that would involve
looking up and creating the object structure, and that whole code sequence
with read_sha1_file() where we look up and add objects to the hashes is
definitely not thread-safe.
Nor do we want to add locking, because the whole point of the preload was
to be simple and not affect anything else. With CE_MATCH_RACY_IS_DIRTY, we
get what we wanted, and we'll just leave the hard cases well alone, to be
done later in the much simpler serial case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: tutorial: add information about "git help" at the beginning
Talking about "git help" is useful because it has a few more
features (like when using it without arguments or with "-a") and
it may work on non unix like platforms.
Also add a few links to git-help(1) in "See also" sections.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: user-manual: add information about "git help" at the beginning
Talking about "git help" is useful because it has a few more
features (like when using it without arguments or with "-a") and
it may work on non unix like platforms.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-remote.c: plug a small memory leak in get_one_remote_for_updates()
We know that the string pointed at by remote->name won't change. It can
be borrowed as the key in the string_list without copying. Other parts of
existing code such as get_one_entry() already rely on this fact.
* git://repo.or.cz/git-gui:
git-gui: Fix the search bar destruction handler.
Update the po template
git-gui: Implement automatic rescan after Tool execution.
git-gui: Allow Tools request arguments from the user.
git-gui: Add a Tools menu for arbitrary commands.
git-gui: Fix the after callback execution in rescan.
git-gui: Implement system-wide configuration handling.
git-gui: try to provide a window icon under X
Since delete_this is an ordinary function, it
should not be passed to cb; otherwise it produces
errors when blame windows are closed. Unfortunately,
it is not noticeable when blame is shown in the
master window, so I missed this bug.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Implement automatic rescan after Tool execution.
The Tools menu is generally intended for commands that
affect the working directory or repository state. Thus,
the user would usually want to initiate rescan after
execution of a tool. This commit implements it.
In case somebody would want to avoid rescanning after
certain tools, it also adds an option that controls it,
although it is not made available through the Add dialog.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Allow Tools request arguments from the user.
While static commands are already useful, some tools need
additional parameters to reach maximum usability. This
commit adds support for passing them one revision name
parameter, and one arbitrary string. With this addition,
the tools menu becomes flexible enough to implement basic
rebase support:
[core]
editor = kwrite
[guitool "Rebase/Abort"]
cmd = git rebase --abort
confirm = yes
[guitool "Rebase/Continue"]
cmd = git rebase --continue
[guitool "Rebase/Skip Commit"]
cmd = git rebase --skip
confirm = yes
[guitool "Rebase/Start..."]
cmd = git rebase $ARGS $REVISION $CUR_BRANCH
title = Start Rebase
prompt = Rebase Current Branch
argprompt = Flags
revprompt = New Base
revunmerged = yes
Some of the options, like title or prompt, are intentionally
not included in the Add dialog to avoid clutter. Also, the
dialog handles argprompt and revprompt as boolean vars.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Due to the emphasis on scriptability in the git
design, it is impossible to provide 100% complete
GUI. Currently unaccounted areas include git-svn
and other source control system interfaces, TopGit,
all custom scripts.
This problem can be mitigated by providing basic
customization capabilities in Git Gui. This commit
adds a new Tools menu, which can be configured
to contain items invoking arbitrary shell commands.
The interface is powerful enough to allow calling
both batch text programs like git-svn, and GUI editors.
To support the latter use, the commands have access
to the name of the currently selected file through
the environment.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Fix the after callback execution in rescan.
The rescan function receives a callback command
as its parameter, which is supposed to be executed
after the scan finishes. It is generally used to
update status. However, rescan may initiate a
loading of a diff, which always calls ui_ready after
completion. If the after handler is called before
that, ui_ready will override the new status.
This commit ensures that the after callback is
properly threaded through the diff machinery.
Since it uncovered the fact that force_first_diff
actually didn't work due to an undeclared global
variable, and the desired effects appeared only
because of the race condition between the diff
system and the rescan callback, I also reimplement
this function to make it behave as originally
intended.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Implement system-wide configuration handling.
With the old implementation any system-wide options appear
to be set locally in the current repository. This commit
adds explicit handling of system options, essentially
interpreting them as customized default_config.
The difficulty in interpreting system options stems from
the fact that simple 'git config' lists all values, while
'git config --global' only values set in ~/.gitconfig,
excluding both local and system options.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When running under X, we try to set up a window icon by providing a
hand-crafted 16x16 Tk photo image equivalent to the .ico. Wrap in a
catch because the earlier Tcl/Tk 8.4 releases didn't provide the 'wm
iconphoto' command.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The space between the commit and the source attribute is not easily
machine-parseable: if we combine --source with --parents and give a SHA1
as a starting point, it's unnecessarily hard to see where the list of
parents ends and the source decoration begins.
Example:
git show --parents --source $(git rev-list HEAD)
which is admittedly contrived, but can easily happen in scripting.
So use a <tab> instead of a space as the source separator.
The other decorations didn't have this issue, because they were surrounded
by parenthesis, so it's obvious that they aren't parent SHA1's.
It so happens that _visually_ this makes no difference for "git log
--source", since "commit <40-char SHA1>" is 47 characters, so both a space
and a <tab> will end up showing as a single commit. Of course, with
'--pretty=oneline' or '--parents' or '--abbrev-commit' you'll see the
difference.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach ls-files --with-tree=<tree> to work with options other than -c
Originally --with-tree=<tree> was designed for the sole purpose of
checking if a given pathspec makes sense as a parameter to git-commit
using it in conjunction with --error-unmatch. It had logic to avoid
showing the same entry (one came from the original index, another from the
overlayed tree) twice so that it works with -c (i.e. "show-cached"), but
otherwise it was not designed to work with the flags such as -m, -d, etc.
This teaches the same logic to cover the codepath for -m and -d.
* maint:
Documentation: git-svn: fix example for centralized SVN clone
Documentation: fix links to "everyday.html"
revision.c: use proper data type in call to sizeof() within xrealloc
Documentation: git-svn: fix example for centralized SVN clone
The example that tells users how to centralize the effort of the initial
git svn clone operation doesn't work properly. It uses rebase but that
only works if HEAD exists. This adds one extra command to create a
somewhat sensible HEAD that should work in all cases.
Signed-off-by: Jan Krüger <jk@jk.gs> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
repack: only unpack-unreachable if we are deleting redundant packs
The -A option calls pack-objects with the --unpack-unreachable option so
that the unreachable objects in local packs are left in the local object
store loose. But if the -d option to repack was _not_ used, then these
unpacked loose objects are redundant and unnecessary.
Update tests in t7701.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can do the lstat() storm in parallel, giving potentially much
improved performance for cold-cache cases or things like NFS that have
weak metadata caching.
Just use "read_cache_preload()" instead of "read_cache()" to force an
optimistic preload of the index stat data. The function takes a
pathspec as its argument, allowing us to preload only the relevant
portion of the index.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: Update git-svn to use the ability to place temporary files within repository directory
Git.pm: Make _temp_cache use the repository directory
git-svn: proper detection of bare repositories
git-svn: respect i18n.commitencoding config
git-svn: don't escape tilde ('~') for http(s) URLs