Apache removes GIT_TRACE from the environment before running
git-http-backend. This can make it hard to debug the server
side of an http session. Let's let it through.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
you may get test failures, because some tests capture and
check the stderr output from git commands (and with
GIT_TRACE set to 1, the trace output will be included
there).
When we see GIT_TRACE set like this, we print a warning to
the user. However, we can do even better than that by just
pointing it to descriptor 4, which all tests leave connected
to the test script's stderr. That's likely what the user
intended (and any scripts that do want to see GIT_TRACE
output will set GIT_TRACE themselves).
Not only does this avoid false negatives in the tests, but
it means the user will actually see trace output for git
calls that redirect their stderr (whereas before, it was
sometimes confusingly buried in a file).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now if a test script receives SIGINT (e.g., because a
test was hanging and the user hit ^C), the shell exits
immediately. This can be annoying if the test script did any
global setup, like starting apache or git-daemon, as it will
not have an opportunity to clean up after itself. A
subsequent run of the test won't be able to start its own
daemon, and will either fail or skip the tests.
Instead, let's trap SIGINT to make sure we do a clean
shutdown, and just chain it to a normal exit (which will
trigger any cleanup).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: do not check NULL return of lookup_unknown_object
We check whether the return value of lookup_unknown_object
is NULL, but some code paths dereference it before our
check. This turns out not to be capable of causing a
segfault, though. The lookup_unknown_object function will
never return NULL, since the whole point is to allocate an
object struct if it does not find an existing one. So the
code here is not wrong, it is just confusing. Let's just
drop the NULL check.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: fix transfer.hiderefs over smart-http
When upload-pack advertises the refs (either for a normal,
non-stateless request, or for the initial contact in a
stateless one), we call for_each_ref with the send_ref
function as its callback. send_ref, in turn, calls
mark_our_ref, which checks whether the ref is hidden, and
sets OUR_REF or HIDDEN_REF on the object as appropriate. If
it is hidden, mark_our_ref also returns "1" to signal
send_ref that the ref should not be advertised.
If we are not advertising refs, (i.e., the follow-up
invocation by an http client to send its "want" lines), we
use mark_our_ref directly as a callback to for_each_ref. Its
marking does the right thing, but when it then returns "1"
to for_each_ref, the latter interprets this as an error and
stops iterating. As a result, we skip marking all of the
refs that come lexicographically after it. Any "want" lines
from the client asking for those objects will fail, as they
were not properly marked with OUR_REF.
To solve this, we introduce a wrapper callback around
mark_our_ref which always returns 0 (even if the ref is
hidden, we want to keep iterating). We also tweak the
signature of mark_our_ref to exclude unnecessary parameters
that were present only to conform to the callback interface.
This should make it less likely for somebody to accidentally
use it as a callback in the future.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was one continue statement without an accompanying `free(ref)`.
Instead of adding that, replace all the free&&continue with a goto
just after writing the refs, where we'd do the free anyway and then
reloop.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect.c: do not leak "conn" after showing diagnosis
When git_connect() is called to see how the URL is parsed for
debugging purposes with CONNECT_DIAG_URL set, the variable conn is
leaked. At this point in the codeflow, it only has its memory and
no other resource is associated with it, so it is sufficient to
clean it up by just freeing it.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: "Mladen B." <mladen074@gmail.com> Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7510: do not fail when gpg warns about insecure memory
Depending on how gpg was built, it may issue the following
message to stderr when run:
Warning: using insecure memory!
When the test is collecting gpg output it is therefore not
enough to just match on a "gpg: " prefix it must also match
on a "Warning: " prefix wherever it needs to match lines
that have been produced by gpg.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Acked-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
which causes git to fail. To avoid this we simply break up the
expansion into two parts so that the whitespace which creates
two arguments instead of one is outside the ${...} like so:
git ${1:+-c} ${1:+push.default="$1"} push
This has the desired effect on all platforms allowing the test
to pass on FreeBSD.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send: use cURL automatically when NO_OPENSSL defined
If both USE_CURL_FOR_IMAP_SEND and NO_OPENSSL are defined do
not force the user to add --curl to get a working git imap-send
command.
Instead automatically select --curl and warn and ignore the
--no-curl option. And while we're in there, correct the
warning message when --curl is requested but not supported.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, log decorations do not indicate which branch is checked out
and whether HEAD is detached.
When branch foo is checked out, change the "HEAD, foo" part of the
decorations to "HEAD -> foo". This serves to indicate both ref
decorations (helped by the spacing) as well as their relationshsip.
As a consequence, "HEAD" without any " -> " denotes a detached HEAD now.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jc/decorate-leaky-separator-color' into HEAD
* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
thread-utils.c: detect CPU count on older BSD-like systems
Not all systems support using sysconf to detect the number
of available CPU cores. Older BSD and BSD-derived systems
only provide the information via the sysctl function.
If HAVE_BSD_SYSCTL is defined attempt to retrieve the number
of available CPU cores using the sysctl function.
If HAVE_BSD_SYSCTL is not defined or the sysctl function
fails, we still attempt to get the information via sysconf.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On BSD-compatible systems some information such as the number
of available CPUs may only be available via the sysctl function.
Add support for a HAVE_BSD_SYSCTL option complete with autoconf
support and include the sys/syctl.h header when the option is
enabled to make the sysctl function available.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-compat-util.h: move SHELL_PATH default into header
If SHELL_PATH is not defined we use "/bin/sh". However,
run-command.c is not the only file that needs to use
the default value so move it into a common header.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has configured a value for SHELL_PATH then
be sure to use it for any generated scripts instead of
hard-coding /bin/sh.
The first line of the script is handled specially, but
the embedded #!/bin/sh line in the here document will
not be automatically updated unless it uses @SHELL_PATH@.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various issues around "reflog expire", e.g. using --updateref when
expiring a reflog for a symbolic reference, have been corrected
and/or made saner.
* mh/expire-updateref-fixes:
reflog_expire(): never update a reference to null_sha1
reflog_expire(): ignore --updateref for symbolic references
reflog: improve and update documentation
struct ref_lock: delete the force_write member
lock_ref_sha1_basic(): do not set force_write for missing references
write_ref_sha1(): move write elision test to callers
write_ref_sha1(): remove check for lock == NULL
Move the variables related to the client-supplied hostname into its own
struct, let execute() own an instance of that instead of storing the
information in global variables and pass the struct to any function that
needs to access it as a parameter.
The lifetime of the variables is easier to see this way. Allocated
memory is released within execute(). The strbufs don't have to be reset
anymore because they are written to only once at most: parse_host_arg()
is only called once by execute() and lookup_hostname() guards against
being called twice using hostname_lookup_done.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert hostname, canon_hostname, ip_address and tcp_port to strbuf.
This allows to get rid of the helpers strbuf_addstr_or_null() and STRARG
because a strbuf always represents a valid (initially empty) string.
sanitize_client() is not needed anymore and sanitize_client_strbuf()
takes its place and name.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git: treat "git -C '<path>'" as a no-op when <path> is empty
'git -C ""' unhelpfully dies with error "Cannot change to ''",
whereas the shell treats `cd ""' as a no-op. Taking the shell's
behavior as a precedent, teach git to treat `-C ""' as a no-op, as
well.
Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prompt string "remove?" used when "git clean -i" asks the user
if a path should be removed was localizable, but the code always
expects a substring of "yes" to tell it to go ahead. Always show
[y/N] as part of this prompt to hint that the answer is not (yet)
localized.
* ja/clean-confirm-i18n:
Add hint interactive cleaning
"git diff --shortstat --dirstat=changes" showed a dirstat based on
lines that was never asked by the end user in addition to the
dirstat that the user asked for.
"git remote add" mentioned "--tags" and "--no-tags" and was not
clear that fetch from the remote in the future will use the default
behaviour when neither is given to override it.
* mg/doc-remote-tags-or-not:
git-remote.txt: describe behavior without --tags and --no-tags
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
Merge branch 'km/send-email-getopt-long-workarounds' into maint
Even though we officially haven't dropped Perl 5.8 support, the
Getopt::Long package that came with it does not support "--no-"
prefix to negate a boolean option; manually add support to help
people with older Getopt::Long package.
* km/send-email-getopt-long-workarounds:
git-send-email.perl: support no- prefix with older GetOptions
The __git_remotes() helper function lists the remotes from the config
file by processing the output of a 'git config' query. A simple 'git
remote' produces the exact same output, so run that instead.
Remotes under '$GIT_DIR/remotes' are still listed by running 'ls -1',
because 'git remote' unfortunately ignores them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
97f05f43 (Show number of TODO items for interactive rebase, 2014-12-10)
taught rebase-interactive to display an item count in the instruction
list comments:
# Rebase 46640c6..5568fd5 onto 46640c6 (4 TODO item(s))
#
# Commands:
# p, pick = use commit
# ...
However, with the exception of the --edit-todo option, "TODO" is a
one-off term, never presented to the user by rebase-interactive in
any other context. The item count is in fact the number of commands
("pick", "edit", etc.) remaining on the instruction sheet, and the
comment immediately following it talks about "Commands". Consequently,
replace "(# TODO item(s))" with the more accurate and meaningful
"(# command(s))".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
97f05f43 (Show number of TODO items for interactive rebase, 2014-12-10)
taught rebase-interactive to compute an item count with 'wc -l' and
display it in the instruction list comments:
'was_alias' variable does not need to store it's value on each
iteration in the loop; this variable gets assigned the result
of run_argv() every time in the loop before being used.
'done_help' variable does not need to be static variable too if
we move it out the loop.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" carefully names a detached HEAD "at" resp. "from" a rev or
ref depending on whether the detached HEAD has moved since. "git branch"
always uses "from", which can be confusing, because a status-aware user
would interpret this as moved detached HEAD.
Make "git branch" use the same logic and wording.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt_status_print() is the only caller of wt_status_get_detached_from().
The latter performs most of the analysis of a detached HEAD, including
finding state->detached_from; the caller checks whether the detached
HEAD is still at state->detached_from or has moved away.
Move that last bit of analysis to wt_status_get_detached_from(), too,
and store the boolean result in state->detached_at.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer calls "commit" with default options, which implies
"--cleanup=default" unless the user specified something else in their
config. This leads to cherry-picked commits getting a cleaned up commit
message, which is usually not an intended side-effect.
Make the sequencer use "--cleanup=verbatim" so that it preserves commit
messages independent of the default, unless the user has set config for "commit"
or the message is amended with -s or -x.
Reported-by: Christoph Anton Mitterer <calestyo@scientia.net> Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit/status: show the index-worktree diff with -v -v
git commit and git status in long format show the diff between HEAD
and the index when given -v. This allows previewing a commit to be made.
They also list tracked files with unstaged changes, but without a diff.
Introduce '-v -v' which shows the diff between the index and the
worktree in addition to the HEAD index diff. This allows a review of unstaged
changes which might be missing from the commit.
In the case of '-v -v', additonal header lines
Changes to be committed:
and
Changes not staged for commit:
are inserted before the diffs, which are equal to those in the status
part; the latter preceded by 50*"-" to make it stick out more.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
These files are used to observe the behaviour of the 'status'
command and if there weren't any such observer, the expected
output from 'status' wouldn't even mention them.
Place them in .gitignore to unclutter the output expected by the
tests. An added benefit is that future tests can add such files
that are purely for use by the observer, i.e. the tests themselves,
by naming them as expect-foo and/or output-bar.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the text flag for ZIP archive entries that look like text files so
that unzip -a can be used to perform end-of-line conversions. Info-ZIP
zip does the same.
Detect binary files the same way as git diff and git grep do, namely by
checking for the attribute "diff" and its negation "-diff", and if none
is found by falling back to checking for the presence of NUL bytes in
the first few bytes of the file contents.
7-Zip, Windows' built-in ZIP functionality and Info-ZIP unzip without
the switch -a are not affected by the change and still extract text
files without doing any end-of-line conversions.
NB: The actual end-of-line style used in the archive entries doesn't
matter to unzip -a, as it converts any CR, CRLF and LF to the line end
characters appropriate for the platform it is running on.
Suggested-by: Ulrike Fischer <luatex@nililand.de> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'es/squelch-openssl-warnings-on-macosx' into maint
An earlier workaround to squelch unhelpful deprecation warnings
from the complier on Mac OSX unnecessarily set minimum required
version of the OS, which the user might want to raise (or lower)
for other reasons.
* es/squelch-openssl-warnings-on-macosx:
git-compat-util: do not step on MAC_OS_X_VERSION_MIN_REQUIRED
Longstanding configuration variable naming rules has been added to
the documentation.
* jc/conf-var-doc:
CodingGuidelines: describe naming rules for configuration variables
config.txt: mark deprecated variables more prominently
config.txt: clarify that add.ignore-errors is deprecated
Clarify in the documentation that "remote.<nick>.pushURL" and
"remote.<nick>.URL" are there to name the same repository accessed
via different transports, not two separate repositories.
* jc/remote-set-url-doc:
Documentation/git-remote.txt: stress that set-url is not for triangular
The tests that wanted to see that file becomes unreadable after
running "chmod a-r file", and the tests that wanted to make sure it
is not run as root, we used "can we write into the / directory?" as
a cheap substitute, but on some platforms that is not a good
heuristics. The tests and their prerequisites have been updated to
check what they really require.
* jk/sanity:
test-lib.sh: set prerequisite SANITY by testing what we really need
tests: correct misuses of POSIXPERM
t/lib-httpd: switch SANITY check for NOT_ROOT
We did not parse username followed by literal IPv6 address in SSH
transport URLs, e.g. ssh://user@[2001:db8::1]:22/repo.git
correctly.
* tb/connect-ipv6-parse-fix:
t5500: show user name and host in diag-url
t5601: add more test cases for IPV6
connect.c: allow ssh://user@[2001:db8::1]/repo.git
* jc/diff-test-updates:
test_ln_s_add: refresh stat info of fake symbolic links
t4008: modernise style
t/diff-lib: check exact object names in compare_diff_raw
tests: do not borrow from COPYING and README from the real source
t4010: correct expected object names
t9300: correct expected object names
t4008: correct stale comments
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
Simplify the ref transaction API around how "the ref should be
pointing at this object" is specified.
* mh/refs-have-new:
refs.h: remove duplication in function docstrings
update_ref(): improve documentation
ref_transaction_verify(): new function to check a reference's value
ref_transaction_delete(): check that old_sha1 is not null_sha1
ref_transaction_create(): check that new_sha1 is valid
commit: avoid race when creating orphan commits
commit: add tests of commit races
ref_transaction_delete(): remove "have_old" parameter
ref_transaction_update(): remove "have_old" parameter
struct ref_update: move "have_old" into "flags"
refs.c: change some "flags" to "unsigned int"
refs: remove the gap in the REF_* constant values
refs: move REF_DELETING to refs.c
reflog_expire(): never update a reference to null_sha1
Currently, if --updateref is specified and the very last reflog entry
is expired or deleted, the reference's value is set to 0{40}. This is
an invalid state of the repository, and breaks, for example, "git
fsck" and "git for-each-ref".
The only place we use --updateref in our own code is when dropping
stash entries. In that code, the very next step is to check if the
reflog has been made empty, and if so, delete the "refs/stash"
reference entirely. Thus that code path ultimately leaves the
repository in a valid state.
But we don't want to the repository in an invalid state even
temporarily, and we don't want to leave an invalid state if other
callers of "git reflog expire|delete --updateref" don't think to do
the extra cleanup step.
So, if "git reflog expire|delete" leaves no more entries in the
reflog, just leave the reference unchanged.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog_expire(): ignore --updateref for symbolic references
If we are expiring reflog entries for a symbolic reference, then how
should --updateref be handled if the newest reflog entry is expired?
Option 1: Update the referred-to reference. (This is what the current
code does.) This doesn't make sense, because the referred-to reference
has its own reflog, which hasn't been rewritten.
Option 2: Update the symbolic reference itself (as in, REF_NODEREF).
This would convert the symbolic reference into a non-symbolic
reference (e.g., detaching HEAD), which is surely not what a user
would expect.
Option 3: Error out. This is plausible, but it would make the
following usage impossible:
git reflog expire ... --updateref --all
Option 4: Ignore --updateref for symbolic references.
We choose to implement option 4.
Note: another problem in this code will be fixed in a moment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revamp the "git reflog" usage documentation in the manpage and the
command help to match the current reality and improve its clarity:
* Add documentation for some options that had been left out.
* Group the subcommands and options more logically and move more
common subcommands/options higher.
* Improve some explanations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com> Edited-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
lock_ref_sha1_basic(): do not set force_write for missing references
If a reference is missing, its SHA-1 will be null_sha1, which can't
possibly match a new value that ref_transaction_commit() is trying to
update it to. So there is no need to set force_write in this scenario.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_ref_sha1(): move write elision test to callers
write_ref_sha1() previously skipped the write if the reference already
had the desired value, unless lock->force_write was set. Instead,
perform that test at the callers.
Two of the callers (in rename_ref()) unconditionally set force_write
just before calling write_ref_sha1(), so they don't need the extra
check at all. Nor do they need to set force_write anymore.
The last caller, in ref_transaction_commit(), still needs the test.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
None of the callers pass NULL to this function, and there doesn't seem
to be any usefulness to allowing them to do so.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
where "commit ... (" is painted in color.diff.commit, "HEAD" in
color.decorate.head, ", " in color.diff.commit, the branch name in
color.decorate.branch and then closing ")" in color.diff.commit.
If you wanted to paint the HEAD and local branch name in the same
color as the body text (perhaps because cyan and green are too faint
on a black-on-white terminal to be readable), you would not want to
have to say
[color "decorate"]
head = black
branch = black
because that you would not be able to reuse same configuration on a
white-on-black terminal. You would naively expect
[color "decorate"]
head = normal
branch = normal
to work, but unfortunately it does not. It paints the string "HEAD"
and the branch name in the same color as the opening parenthesis or
comma between the decoration elements. This is because the code
forgets to reset the color after printing the "prefix" in its own
color.
It theoretically is possible that some people were expecting and
relying on that the attribute set as the "diff.commit" color, which
is used to draw these opening parenthesis and inter-item comma, is
inherited by the drawing of branch names, but it is not how the
coloring works everywhere else.