Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-mediawiki: more efficient 'pull' in the best case
The only way to fetch new revisions from a wiki before this patch was to
query each page for new revisions. This is good when tracking a small set
of pages on a large wiki, but very inefficient when tracking many pages
on a wiki with little activity.
Implement a new strategy that queries the wiki for its last global
revision, queries each new revision, and filter out pages that are not
tracked.
Signed-off-by: Simon Perrat <simon.perrat@ensimag.imag.fr> Signed-off-by: Simon CATHEBRAS <Simon.Cathebras@ensimag.imag.fr> Signed-off-by: Julien KHAYAT <Julien.Khayat@ensimag.imag.fr> Signed-off-by: Charles ROUSSEL <Charles.Roussel@ensimag.imag.fr> Signed-off-by: Guillaume SASDY <Guillaume.Sasdy@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-mediawiki: refactor loop over revision ids
Without changing the behavior, we turn the foreach loop on an array of
revisions into a loop on an array of integer. It will be easier to
implement other strategies as they will only need to produce an array of
integer instead of a more complex data-structure.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-mediawiki: change return type of get_mw_pages
The previous version was returning the list of pages to be fetched, but
we are going to need an efficient membership test (i.e. is the page
$title tracked), hence exposing a hash will be more convenient.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-mediawiki (t9363): test 'File:' import and export
Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr> Signed-off-by: NGUYEN Kim Thuat <Kim-Thuat.Nguyen@ensimag.imag.fr> Signed-off-by: ROUCHER IGLESIAS Javier <roucherj@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-mediawiki (t9361): test git-remote-mediawiki pull and push
This patch provides a set of tests for the pull and push fonctionnality
of git-remote-mediawiki. The actual tests are kept in a separate function
to allow further tests to re-run the same set of commands with different
push and pull strategies.
Signed-off-by: Simon CATHEBRAS <Simon.Cathebras@ensimag.imag.fr> Signed-off-by: Julien KHAYAT <Julien.Khayat@ensimag.imag.fr> Signed-off-by: Simon Perrat <simon.perrat@ensimag.imag.fr> Signed-off-by: Charles ROUSSEL <Charles.Roussel@ensimag.imag.fr> Signed-off-by: Guillaume SASDY <Guillaume.Sasdy@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-mediawiki: test environment of git-remote-mediawiki
In order to test git-remote-mediawiki, a set of functions is needed to
manage a MediaWiki: edit a page, remove a page, fetch a page, fetch all
pages on a given wiki.
A few helper function are also provided to check the content of
directories.
In addition, this patch provides Makefiles to execute tests.
See the README file for more details.
Signed-off-by: Simon CATHEBRAS <Simon.Cathebras@ensimag.imag.fr> Signed-off-by: Julien KHAYAT <Julien.Khayat@ensimag.imag.fr> Signed-off-by: Simon Perrat <simon.perrat@ensimag.imag.fr> Signed-off-by: Charles ROUSSEL <Charles.Roussel@ensimag.imag.fr> Signed-off-by: Guillaume SASDY <Guillaume.Sasdy@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-mediawiki: scripts to install, delete and clear a MediaWiki
install_wiki.sh allows the user to install a MediaWiki instance in a
single shell command. Like "git instaweb", it configures and launches
lighttpd without requiring root priviledges. To simplify database
management, it uses SQLite, which doesn't require a running daemon, and
allows reseting the database by simply replacing a single file. This
allows install_wiki to also defines a function wiki_reset which clear all
content of the previously created wiki, which will be very useful to run
several indepenant tests on the same wiki.
Note those functionnalities are made to be used from the user command
line in the directory git/contrib/mw-to-git/t/
Signed-off-by: Simon CATHEBRAS <Simon.Cathebras@ensimag.imag.fr> Signed-off-by: Julien KHAYAT <Julien.Khayat@ensimag.imag.fr> Signed-off-by: Simon Perrat <simon.perrat@ensimag.imag.fr> Signed-off-by: Charles ROUSSEL <Charles.Roussel@ensimag.imag.fr> Signed-off-by: Guillaume SASDY <Guillaume.Sasdy@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid recalculating the same diffOpts for each commit, move it
out of applyCommit() and into the top-level run(). Also fix a bug
in that code which interpreted the value of detectRenames as a
string rather than as a boolean.
[pw: fix documentation, rearrange code a bit]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com> Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
P4 has a feature called "jobs" that allows linking changes
to a bug tracking system or other tasks. When submitting
code, a job name can be specified to mark that this change
is associated with a particular job.
Teach git-p4 to find an optional "Jobs:" line in git commit
messages and use them to make a Jobs section in the p4
change specifitation.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be useful in future tests. Move it to
the git-p4 test library. Let it accept an optional argument
to pick a certain marshaled object out of the input stream.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the vcs-svn/ library only pays attention to the presence of
the Prop-Content-Length field and doesn't care about its value, but
some day we might care about the value. Parse it as an off_t instead
of arbitrarily limiting to 32 bits for intuitiveness.
So now you can import from a dump with more than 2 GiB of properties
for a node. In practice that isn't likely to happen often, and this
is mostly meant as a cleanup.
Based-on-patch-by: David Barr <davidbarr@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
vcs-svn: suppress a signed/unsigned comparison warning
All callers pass a nonnegative delta_len, so the code is already safe.
Add an assertion to ensure that remains so and add a cast to keep
clang and gcc -Wsign-compare from worrying.
Reported-by: David Barr <davidbarr@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
These are already safe because both sides of the comparison are
nonnegative.
This would normally not be important because Git is not -Wsign-compare
clean anyway, but we like to keep the vcs-svn/ lib to a higher
standard for convenience using it in other projects.
Signed-off-by: David Barr <davidbarr@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Avoiding it makes the code clearer and makes it easier for projects
that don't share git's compat/ code, such as the standalone
svn-dump-fast-export project, to reuse the vcs-svn/ library.
Signed-off-by: David Barr <davidbarr@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Since the length of t is already known, we can simplify a little by
using memcmp() instead of strncmp() to carry out a prefix comparison.
All nearby code already does this.
Noticed in the standalone svn-dump-fast-export project which has not
needed to implement prefixcmp() yet.
Signed-off-by: David Barr <davidbarr@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
vcs-svn: avoid self-assignment in dummy initialization of pre_off
Without this change, clang complains:
vcs-svn/svndiff.c:298:3: warning: Assigned value is garbage or undefined
off_t pre_off = pre_off; /* stupid GCC... */
^ ~~~~~~~
This code uses an old and common idiom for suppressing an
"uninitialized variable" warning, and clang is wrong to warn about it.
The idiom tells the compiler to leave the variable uninitialized,
which saves a few bytes of code size, and, more importantly, allows
valgrind to check at runtime that the variable is properly initialized
by the time it is used.
But MSVC and clang do not know that idiom, so let's avoid it in
vcs-svn/ code.
Initialize pre_off to -1, a recognizably meaningless value, to allow
future code changes that cause pre_off to be used before it is
initialized to be caught early.
Signed-off-by: David Barr <davidbarr@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
works only for some shells (such as bash) but not others (such as dash)
because VAR=value does not end up in the environment for command when it
is called by the shell function test_must_fail. That is why we explicitly
set and export variable in a subshell, i.e.
(
VAR=value &&
export VAR &&
test_must_fail command args
)
in most places already, bar the newly introduced 57 from b64b7fe
(Add tests for rebase -i --root without --onto, 2012-06-26).
Make test 57 use that construct also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tip tree is the one of major subsystem tree in the
Linux kernel project. On the tip tree, the Link: (or
similar Buglink:) tag is used for tracking the original
discussion or context. Since it's ususally in the S-o-b
area, it'd be better using same style with others.
Also as it tends to contain a message-id sent from git
send-email, a part of the line would set a wrong hyperlink
like [1]. Fix it by not using format_log_line_html().
gitweb: Handle other types of tag in git_print_log
There are many types of tags used in S-o-b area [1].
Update the regex to handle them properly. It requires
the tag should be started by a capital letter and ended
by '-by: ' or '-By: '. The only exception is 'Cc: '.
[1] http://lwn.net/Articles/503829/
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a signed-off-by line (and its friends), we set $signoff
to true, but then we process the next line after we are done without
giving control to the rest of the loop. And when the line we saw is
not a signed-off-by line, we reset $signoff to false before running
the remainder of the loop.
Hence, the check for $signoff that attempts to remove an extra empty
line between two signed-off-by line was not doing anything useful.
Rename $empty to a more explicit name $skip_blank_line to tell us to
skip a blank line when we see one, set it after we see and emit a
blank line (to avoid showing more than one empty lines in a raw) or
after we handle a signed-off-by line (to avoid empty lines after
such a line), to fix this bug, and get rid of the $signoff variable
that is not useful.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get disconnected while expecting a response from the remote
side because authentication failed, we issued an error message "The
remote side hung up unexpectedly."
Give hint that it may be a permission problem in the message when we
can reasonably suspect it.
* hv/remote-end-hung-up:
remove the impression of unexpectedness when access is denied
push: don't guess at qualifying remote refs on deletion
When we try to push a ref and the right-hand side of the
refspec does not find a match, we try to create it. If it is
not fully qualified, we try to guess where it would go in
the refs hierarchy based on the left-hand source side. If
the source side is not a ref, then we give up and give a
long explanatory message.
For deletions, however, this doesn't make any sense. We
would never want to create on the remote side, and if an
unqualified ref can't be matched, it is simply an error. The
current code handles this already because the left-hand side
is empty, and therefore does not give us a hint as to where
the right-hand side should go, and we properly error out.
Unfortunately, the error message is the long "we tried to
qualify this, but the source side didn't let us guess"
message, which is quite confusing.
Instead, we can just be more succinct and say "we can't
delete this because we couldn't find it". So before:
$ git push origin :bogus
error: unable to push to unqualified destination: bogus
The destination refspec neither matches an existing ref on the remote nor
begins with refs/, and we are unable to guess a prefix based on the source ref.
error: failed to push some refs to '$URL'
and now:
$ git push origin :bogus
error: unable to delete 'bogus': remote ref does not exist
error: failed to push some refs to '$URL'
It is tempting to also catch a fully-qualified ref like
"refs/heads/bogus" and generate the same error message.
However, that currently does not error out at all, and
instead gets sent to the remote side, which typically
generates a warning:
$ git push origin:refs/heads/bogus
remote: warning: Deleting a non-existent ref.
To $URL
- [deleted] bogus
While it would be nice to catch this error early, a
client-side error would mean aborting the push entirely and
changing push's exit code. For example, right now you can
do:
$ git push origin refs/heads/foo refs/heads/bar
and end up in a state where "foo" and "bar" are deleted,
whether both of them currently exist or not (and see an
error only if we actually failed to contact the server).
Generating an error would cause a regression for this use
case.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes two formatting bugs in the git-config documentation:
- in the column.ui entry don't indent the last paragraph so that it isn't
formatted as a literal paragraph
- in the push.default entry separate the last paragraph from the
nested list.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_name.c: teach get_short_sha1() a commit-only option
When the caller knows that the parameter is meant to name a commit,
e.g. "56789a" in describe name "v1.2.3-4-g56789a", pass that as a
hint so that lower level can use it to disambiguate objects when
there is only one commit whose name begins with 56789a even if there
are objects of other types whose names share the same prefix.
sha1_name.c: allow get_short_sha1() to take other flags
Instead of a separate "int quietly" argument, make it take "unsigned
flags" so that we can pass other options to it.
The bit assignment of this flag word is exposed in cache.h because
the mechanism will be exposed to callers of the higher layer in
later commits in this series.
In finish_object_disambiguation(), if the candidate hasn't been
checked, there are two cases:
- It is the first and only object that match the prefix; or
- It replaced another object that matched the prefix but that
object did not satisfy ds->fn() callback.
And the former case we set ds->candidate_ok to true without doing
anything else, while for the latter we check the candidate, which
may set ds->candidate_ok to false.
At this point in the code, ds->candidate_ok can be false only if
this last-round check found that the candidate does not pass the
check, because the state after update_candidates() returns cannot
satisfy
Hence, when we execute this "return", we know we have seen more than
one object that match the prefix (and none of them satisfied ds->fn),
meaning that we should say "the short name is ambiguous", not "there
is no object that matches the prefix".
sha1_name.c: restructure disambiguation of short names
We try to find zero, one or more matches from loose objects and
packed objects independently and then decide if the given short
object name is unique across them.
Instead, introduce a "struct disambiguate_state" that keeps track of
what we have found so far, that can be one of:
- We have seen one object that _could_ be what we are looking for;
- We have also checked that object for additional constraints (if any),
and found that the object satisfies it;
- We have also checked that object for additional constraints (if any),
and found that the object does not satisfy it; or
- We have seen more than one objects that satisfy the constraints.
and pass it to the enumeration functions for loose and packed
objects. The disambiguation state can optionally take a callback
function that takes a candidate object name and reports if the
object satisifies additional criteria (e.g. when the caller knows
that the short name must refer to a commit, this mechanism can be
used to check the type of the given object).
Compared to the earlier attempt, this round avoids the optional
check if there is only one candidate that matches the short name in
the first place.
sha1_name.c: correct misnamed "canonical" and "res"
These are hexadecimal and binary representation of the short object
name given to the callchain as its input. Rename them with _pfx
suffix to make it clear they are prefixes, and call them hex and bin
respectively.
There are only two callers, and they will benefit from being able to
pass disambiguation hints to underlying get_sha1_with_context() API
once it happens.
The only external caller is setup.c that tries to give a nicer error
message when an object name is misspelt (e.g. "HEAD:cashe.h").
Retire it and give the caller a dedicated and more intuitive API
function maybe_die_on_misspelt_object_name().
blame: compute abbreviation width that ensures uniqueness
Julia Lawall noticed that in linux-next repository the commit object 60d5c9f5 (shown with the default abbreviation width baked into "git
blame") in output from
diff-index.c: "git diff" has no need to read blob from the standard input
Only "diff --no-index -" does. Bolting the logic into the low-level
function diff_populate_filespec() was a layering violation from day
one. Move populate_from_stdin() function out of the generic diff.c
to its only user, diff-index.c.
Also make sure "-" from the command line stays a special token "read
from the standard input", even if we later decide to sanitize the
result from prefix_filename() function in a few obvious ways,
e.g. removing unnecessary "./" prefix, duplicated slashes "//" in
the middle, etc.
diff-index.c: unify handling of command line paths
Regardless of where in the directory hierarchy you are, "-" on the
command line means the standard input. The old code knew too much
about how the low level machinery uses paths to read from the
working tree and did not bother to have the same check for "-" when
the command is run from the top-level.
Unify the codepaths for subdirectory case and toplevel case into one
and make it clearer.
"git diff --no-index" takes exactly two paths, not pathspecs, and
has its own way queue_diff() to populate the diff_queue. Do not
call diff_tree_setup_paths(), pretending as it takes pathspecs.
Split a rather heavy-ish "git completion" script out to create a
separate "git prompting" script, to help lazy-autoloading of the
completion part while making prompting part always available.
Teach "git submodule" deal with nested submodule structure where a
module is contained within a module whose origin is specified as a
relative URL to its superproject's origin.
When "--simplify-merges/by-decoration" is given together with
"--first-parent" to "git log", the combination of these options
makes the simplification logic to use in-core commit objects that
haven't been examined for relevance, either producing incorrect
result or taking too long to produce any output. Teach the
simplification logic to ignore commits that the first-parent
traversal logic ignored when both are in effect to work around the
issue.
"git add" allows adding a regular file to the path where a submodule
used to exist, but "git update-index" does not allow an equivalent
operation to Porcelain writers.
Attempt to optimize matching with an exclude pattern with a deep
directory hierarchy by taking the part that specifies leading path
without wildcard literally.
Setting this to a URL prefix instead of a path to a local directory allows
git-help --web to work even when HTML docs aren't locally installed, by
pointing the browser at a copy accessible on the web. For example,
[help]
format = html
htmlpath = http://git-scm.com/docs
will use the publicly available documentation on the git homepage.
Signed-off-by: Chris Webb <chris@arachsys.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add config variable to set HTML path for git-help --web
If set in git-config, help.htmlpath overrides system_path(GIT_HTML_PATH)
which was compiled in. This allows users to repoint system-wide git at
their own copy of the documentation without recompiling.
Signed-off-by: Chris Webb <chris@arachsys.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct used to get the return code was flawed, in that
errors in the &&-chain before the semicolon were not caught. Use
the standard test_expect_code instead.
Set PATH in a subshell instead of relying on the bashism of
setting it just for a single command.
And fix the grep line so it doesn't worry about grep segfaults,
and doesn't fail for i18n issues.
Reported-by: Johannes Sixt <j.sixt@viscovery.net> Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original t9800 test code has a mix of assorted topics, some
of which are big enough to deserve their own homes.
Interdependencies between the topics make it confusing when
trying to study one in isolation. And it takes so long to run
that debugging an individual test is difficult.
Split out three big chunks of tests into their own files:
t9812-git-p4-wildcards.sh gets the 8 p4 wildcard tests
t9813-git-p4-preserve-users.sh gets the 4 --preserve-user tests
t9814-git-p4-rename.sh gets the 2 copy and rename tests
Test 9800 execution time drops from 29 sec to 9 sec. The
sequential time to run all tests is a slower due to the three
extra p4d startup/shutdown sequences, but the overall parallel
execution time is about the same, at 52 sec.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Msysgit testing showed that the source file found by copy
detection is indeterminate when there are multiple sources
to choose from. This appears to be valid. Adjust the test
so that it passes if it finds any of the potential copy sources.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git p4 test: use real_path to resolve p4 client symlinks
The p4 program is finicky about making sure the recorded client Root
matches the current working directory. The way it discovers the latter
seems to be to inspect shell variable $PWD. This could involve symlinks,
that while leading to the same place as the client Root, look different,
and cause p4 to fail.
Resolve all client paths using "test-path-utils real_path $path". This
removes ".." and resolves all symlinks.
Discovered while running with --root=/dev/shm, which is a link to
/run/shm.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git p4 test: wait longer for p4d to start and test its pid
Running tests at high parallelism on a slow machine, 5 sec is
not enough to wait for p4d to start. Change it to 5 minutes,
adding an environment variable P4D_START_PATIENCE to shrink
that if needed in automated test environments.
Also check if the pid of the p4d that we started is still
around. If not, quit waiting for it immediately.
Remove all the confusing && chaining and simplify the code.
Thanks-to: Junio C Hamano <gitster@pobox.com> Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A path containing a space must be quoted when used as an
argument to either the copy or rename commands (because
unlike other commands, the path is not the final thing on
the line for those commands).
Commit 6280dfdc3b (fast-export: quote paths in output,
2011-08-05) previously attempted to fix fast-export's
quoting by passing all paths through quote_c_style().
However, that function does not consider the space to be a
character which requires quoting, so let's special-case the
space inside print_path(). This will cause space-containing
paths to also be quoted in other commands where such quoting
is not strictly necessary, but it does not hurt to do so.
The test from 6280dfdc3b did not detect this because, while
it does introduce renames in the export stream, it does not
actually turn on rename detection, so they were presented as
pairs of deletions/adds. Using "-M" reveals the bug.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the symmetrical feature to the "File:" export support in the previous
patch. Download files from the wiki as needed, and feed them into the
fast-import stream. Import both the file itself, and the corresponding
description page.
Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr> Signed-off-by: NGUYEN Kim Thuat <Kim-Thuat.Nguyen@ensimag.imag.fr> Signed-off-by: ROUCHER IGLESIAS Javier <roucherj@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-mediawiki: send "File:" attachments to a remote wiki
The current version of the git-remote-mediawiki supports only import and
export of plain wiki pages. This patch adds the functionality to export
file attachments (i.e. the content of the File: MediaWiki namespace),
which are also exposed by MediaWiki API.
This requires a recent version of MediaWiki::API (Version 0.37 works.
Version 0.34 doesn't).
Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr> Signed-off-by: NGUYEN Kim Thuat <Kim-Thuat.Nguyen@ensimag.imag.fr> Signed-off-by: ROUCHER IGLESIAS Javier <roucherj@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The use of this statement is generally discouraged, and is too intrusive
for us: it forces the HTTP requests made by the API to contain only valid
UTF-8 characters. This would break the upload of binary files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-mediawiki: don't compute the diff when getting commit message
While we're there, simplify the code a bit: since log --format=%s anyway
shows the subject line as a single line, no need to split to take the
first line.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test for likely breakages in t3404, including successful reordering of
non-conflicting changes with a new root, correct preservation of commit
message and author in a root commit when it is squashed with the
sentinel, and presence of the sentinel following a conflicting
cherry-pick of a new root.
Remove test_must_fail for git rebase --root without --onto from t3412 as
this case will now be successfully handled by an implicit git rebase -i.
Signed-off-by: Chris Webb <chris@arachsys.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow --root to be specified to rebase -i without --onto, making it
possible to edit and re-order all commits right back to the root(s).
If there is a conflict to be resolved when applying the first change,
the user will expect a sane index and working tree to get sensible
behaviour from git-diff and friends, so create a sentinel commit with an
empty tree to rebase onto. Automatically squash the sentinel with any
commits rebased directly onto it, so they end up as root commits in
their own right and retain their authorship and commit message.
Implicitly use rebase -i for non-interactive rebase of --root without
an --onto argument now that rebase -i can correctly do this.
Signed-off-by: Chris Webb <chris@arachsys.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Cygwin implementation of pread() is not thread-safe since, just
like the emulation provided by compat/pread.c, it uses a sequence of
seek-read-seek calls. In order to avoid failues due to thread-safety
issues, commit b038a61 disables threading when NO_PREAD is defined.
(ie when using the emulation code in compat/pread.c).
We introduce a new build variable, NO_THREAD_SAFE_PREAD, which allows
use to disable the threaded index-pack code on cygwin, in addition to
the above NO_PREAD case.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5e835ca (rebase: do not munge commit log message, 2008-04-16),
'git am --rebasing' no longer gets the commit log message from the
patch, but reads it from the commit identified by the "From " header
line. From 43c2325 (am: use get_author_ident_from_commit instead of
mailinfo when rebasing, 2010-06-16), it also gets the author name,
email and date from the commit. Now that the final part of the patch
-- the patch body itself -- is also read from the commit, there is no
longer a need to call 'git mailinfo' to extract any of these parts
while --rebasing.
Sugested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
am --rebasing: get patch body from commit, not from mailbox
Rebasing a commit that contains a diff in the commit message results
in a failure with output such as
First, rewinding head to replay your work on top of it...
Applying: My cool patch.
fatal: sha1 information is lacking or useless
(app/controllers/settings_controller.rb).
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001 My cool patch.
The reason is that 'git rebase' without -p/-i/-m internally calls 'git
format-patch' and pipes the output to 'git am --rebasing', which has
no way of knowing what is a real patch and what is a commit message
that contains a patch.
Make 'git am' while in --rebasing mode get the patch body from the
commit object instead of extracting it from the mailbox.
Patch by Junio, test case and commit log message by Martin.
Reported-by: anikey <arty.anikey@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>