tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use 'test_must_be_empty' instead of 'test ! -s'
Using 'test_must_be_empty' is preferable to 'test ! -s', because it
gives a helpful error message if the given file is unexpectedly no
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was created by:
sed -i -e 's/test ! -s/test_must_be_empty/' t[0-9]*.sh
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use 'test_must_be_empty' instead of '! test -s'
Using 'test_must_be_empty' is preferable to '! test -s', because it
gives a helpful error message if the given file is unexpectedly not
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was basically created by:
sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh
with the following notable exceptions:
- The '! test -s' check in '.gitmodules ignore=dirty suppresses
submodules with untracked content' in 't7508-status.sh' is left
as-is, because it's bogus and, therefore, it's subject of a
dedicated patch.
- The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and
't9135-git-svn-moved-branch-empty-file.sh' are immediately
preceeded by a 'test -f' to ensure that the files exist in the
first place. 'test_must_be_empty' ensures that as well, so those
'test -f' commands are removed as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Group the possible values using a pair of parentheses and don't mark
them for translation, as they are literal strings that have to be used
as-is in any locale.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Spell out all alternatives and avoid using a numerical range operator,
as it is not mentioned in CodingGuidelines and the resulting string is
still concise. Wrap them in parentheses to document clearly that the
"--stage=" part is common among them.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
generate-cmdlist.sh: collect config from all config.txt files
This script uses Documentation/config.txt as input for "git help
--config" and "git config" completion but it misses the fact that
config.txt includes other txt files. Include all *config.txt as input
when scanning for config keys. This could produce false positives, but
as long as we stick to the blah-config.txt naming convention, we
should be ok.
While at there, move diff.* from config.txt to diff-config.txt where
all other diff config keys are.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git pack-objects --local', we want to avoid packing
objects that are in an alternate. Currently, we check for these
objects using the packed_git_mru list, which excludes the pack-files
covered by a multi-pack-index.
Add a new iteration over the multi-pack-indexes to find these
copies and mark them as unwanted.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new get_all_packs() method exposed the packfiles coverede by
a multi-pack-index. Before, the 'git cat-file --batch' and
'git count-objects' commands would skip objects in an environment
with a multi-pack-index.
Further, a reachability bitmap would be ignored if its pack-file
was covered by a multi-pack-index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many places in the codebase that want to iterate over
all packfiles known to Git. The purposes are wide-ranging, and
those that can take advantage of the multi-pack-index already
do. So, use get_all_packs() instead of get_packed_git() to be
sure we are iterating over all packfiles.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a repo contains a multi-pack-index, then the packed_git list
does not contain the packfiles that are covered by the multi-pack-index.
This is important for doing object lookups, abbreviations, and
approximating object count. However, there are many operations that
really want to iterate over all packfiles.
Create a new 'all_packs' linked list that contains this list, starting
with the packfiles in the multi-pack-index and then continuing along
the packed_git linked list.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for constructing the linked list of multi-pack-indexes
in the object store is incorrect. If the local object store has
a multi-pack-index, but an alternate does not, then the list is
dropped.
Add tests that would have revealed this bug.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When prepare_packed_git is called with the report_garbage method
initialized, we report unexpected files in the objects directory
as garbage. Stop reporting the multi-pack-index and the pack-files
it covers as garbage.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an object fails to decompress from a pack-file, we mark the object
as 'bad' so we can retry with a different copy of the object (if such a
copy exists).
Before now, the multi-pack-index did not update the bad objects list for
the pack-files it contains, and we did not check the bad objects list
when reading an object. Now, do both.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pack-file is 'local' if it is stored within the usual object
directory. If it is stored in an alternate, it is non-local.
Pack-files are stored using a 'pack_local' member in the packed_git
struct. Add a similar 'local' member to the multi_pack_index struct
and 'local' parameters to the methods that load and prepare multi-
pack-indexes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack-index builtin has a very simple command-line
interface. Instead of simply reporting usage, give the user a
hint to why the arguments failed.
Reported-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ds/multi-pack-index: (23 commits)
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
midx: sort and deduplicate objects from packfiles
midx: read pack names into array
multi-pack-index: write pack names in chunk
multi-pack-index: read packfile list
packfile: generalize pack directory list
t5319: expand test data
multi-pack-index: load into memory
midx: write header information to lockfile
multi-pack-index: add 'write' verb
...
The range-diff coloring is a bit fuzzy when it comes to special lines of
a diff, such as indicating new and old files with +++ and ---, as it
would pickup the first character and interpret it for its coloring, which
seems annoying as in regular diffs, these lines are colored bold via
DIFF_METAINFO.
By indenting these lines by a white space, they will be treated as context
which is much more useful, an example [1] on the range diff series itself:
The first lines that introduce the new file for the man page will have the
'+' sign colored and the rest of the line will be bold.
The later lines that indicate a change to the Makefile will be treated as
context both in the outer and inner diff, such that those lines stay
regular color.
[1] ./git-range-diff pr-1/dscho/branch-diff-v3...pr-1/dscho/branch-diff-v4
These tags are found at https://github.com/gitgitgadget/git
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-diff: make use of different output indicators
This change itself only changes the internal communication and should
have no visible effect to the user. We instruct the diff code that
produces the inner diffs to use other markers instead of the
usual markers for new, old and context lines.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will prove useful in range-diff in a later patch as we will be able to
differentiate between adding a new file (that line is starting with +++
and then the file name) and regular new lines.
It could also be useful for experimentation in new patch formats, i.e.
we could teach git to emit moved lines with lines other than +/-.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/perf: add perf tests for fetches from a bitmapped server
A server with bitmapped packs can serve a clone very
quickly. However, fetches are not necessarily made any
faster, because we spend a lot less time in object traversal
(which is what bitmaps help with) and more time finding
deltas (because we may have to throw out on-disk deltas if
the client does not have the base).
As a first step to making this faster, this patch introduces
a new perf script to measure fetches into a repo of various
ages from a fully-bitmapped server.
We separately measure the work done by the server (in
pack-objects) and that done by the client (in index-pack).
Furthermore, we measure the size of the resulting pack.
Breaking it down like this (instead of just doing a regular
"git fetch") lets us see how much each side benefits from
any changes. And since we know the pack size, if we estimate
the network speed, then one could calculate a complete
wall-clock time for the operation (though the script does
not do this automatically).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main objective of scripts in the perf framework is to
run "test_perf", which measures the time it takes to run
some operation. However, it can also be interesting to see
the change in the output size of certain operations.
This patch introduces test_size, which records a single
numeric output from the test and shows it in the aggregated
output (with pretty printing and relative size comparison).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
About half of test_perf() is boilerplate preparing to run
_any_ test, and the other half is specifically running a
timing test. Let's split it into two functions, so that we
can reuse the boilerplate in future commits.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick --quit" failed to remove CHERRY_PICK_HEAD even
though we won't be in a cherry-pick session after it returns, which
has been corrected.
* nd/cherry-pick-quit-fix:
cherry-pick: fix --quit not deleting CHERRY_PICK_HEAD
When "git rebase -i" is told to squash two or more commits into
one, it labeled the log message for each commit with its number.
It correctly called the first one "1st commit", but the next one
was "commit #1", which was off-by-one. This has been corrected.
* pw/rebase-i-squash-number-fix:
rebase -i: fix numbering in squash message
Recent update to "git config" broke updating variable in a
subsection, which has been corrected.
* sb/config-write-fix:
git-config: document accidental multi-line setting in deprecated syntax
config: fix case sensitive subsection names on writing
t1300: document current behavior of setting options
* en/incl-forward-decl:
Remove forward declaration of an enum
compat/precompose_utf8.h: use more common include guard style
urlmatch.h: fix include guard
Move definition of enum branch_track from cache.h to branch.h
alloc: make allocate_alloc_state and clear_alloc_state more consistent
Add missing includes and forward declarations
After a partial clone, repeated fetches from promisor remote would
have accumulated many packfiles marked with .promisor bit without
getting them coalesced into fewer packfiles, hurting performance.
"git repack" now learned to repack them.
* jt/repack-promisor-packs:
repack: repack promisor objects if -a or -A is set
repack: refactor setup of pack-objects cmd
A test prerequisite defined by various test scripts with slightly
different semantics has been consolidated into a single copy and
made into a lazily defined one.
* wc/make-funnynames-shared-lazy-prereq:
t: factor out FUNNYNAMES as shared lazy prereq
"git pull --rebase -v" in a repository with a submodule barfed as
an intermediate process did not understand what "-v(erbose)" flag
meant, which has been fixed.
* sb/pull-rebase-submodule:
git-submodule.sh: accept verbose flag in cmd_update to be non-quiet
"git tbdiff" that lets us compare individual patches in two
iterations of a topic has been rewritten and made into a built-in
command.
* js/range-diff: (21 commits)
range-diff: use dim/bold cues to improve dual color mode
range-diff: make --dual-color the default mode
range-diff: left-pad patch numbers
completion: support `git range-diff`
range-diff: populate the man page
range-diff --dual-color: skip white-space warnings
range-diff: offer to dual-color the diffs
diff: add an internal option to dual-color diffs of diffs
color: add the meta color GIT_COLOR_REVERSE
range-diff: use color for the commit pairs
range-diff: add tests
range-diff: do not show "function names" in hunk headers
range-diff: adjust the output of the commit pairs
range-diff: suppress the diff headers
range-diff: indent the diffs just like tbdiff
range-diff: right-trim commit messages
range-diff: also show the diff between patches
range-diff: improve the order of the shown commits
range-diff: first rudimentary implementation
Introduce `range-diff` to compare iterations of a topic branch
...
The more library-ish parts of the codebase learned to work on the
in-core index-state instance that is passed in by their callers,
instead of always working on the singleton "the_index" instance.
* nd/no-the-index: (24 commits)
blame.c: remove implicit dependency on the_index
apply.c: remove implicit dependency on the_index
apply.c: make init_apply_state() take a struct repository
apply.c: pass struct apply_state to more functions
resolve-undo.c: use the right index instead of the_index
archive-*.c: use the right repository
archive.c: avoid access to the_index
grep: use the right index instead of the_index
attr: remove index from git_attr_set_direction()
entry.c: use the right index instead of the_index
submodule.c: use the right index instead of the_index
pathspec.c: use the right index instead of the_index
unpack-trees: avoid the_index in verify_absent()
unpack-trees: convert clear_ce_flags* to avoid the_index
unpack-trees: don't shadow global var the_index
unpack-trees: add a note about path invalidation
unpack-trees: remove 'extern' on function declaration
ls-files: correct index argument to get_convert_attr_ascii()
preload-index.c: use the right index instead of the_index
dir.c: remove an implicit dependency on the_index in pathspec code
...
Improve built-in facility to catch broken &&-chain in the tests.
* es/chain-lint-more:
chainlint: add test of pathological case which triggered false positive
chainlint: recognize multi-line quoted strings more robustly
chainlint: let here-doc and multi-line string commence on same line
chainlint: recognize multi-line $(...) when command cuddled with "$("
chainlint: match 'quoted' here-doc tags
chainlint: match arbitrary here-docs tags rather than hard-coded names
Among the three codepaths we use O_APPEND to open a file for
appending, one used for writing GIT_TRACE output requires O_APPEND
implementation that behaves sensibly when multiple processes are
writing to the same file. POSIX emulation used in the Windows port
has been updated to improve in this area.
The API to iterate over all objects learned to optionally list
objects in the order they appear in packfiles, which helps locality
of access if the caller accesses these objects while as objects are
enumerated.
* jk/for-each-object-iteration:
for_each_*_object: move declarations to object-store.h
cat-file: use a single strbuf for all output
cat-file: split batch "buf" into two variables
cat-file: use oidset check-and-insert
cat-file: support "unordered" output for --batch-all-objects
cat-file: rename batch_{loose,packed}_object callbacks
t1006: test cat-file --batch-all-objects with duplicates
for_each_packed_object: support iterating in pack-order
for_each_*_object: give more comprehensive docstrings
for_each_*_object: take flag arguments as enum
for_each_*_object: store flag definitions in a single location
"git verify-tag" and "git verify-commit" have been taught to use
the exit status of underlying "gpg --verify" to signal bad or
untrusted signature they found.
* jc/gpg-status:
gpg-interface: propagate exit status from gpg back to the callers
* en/t7406-fixes:
t7406: avoid using test_must_fail for commands other than git
t7406: prefer test_* helper functions to test -[feds]
t7406: avoid having git commands upstream of a pipe
t7406: simplify by using diff --name-only instead of diff --raw
t7406: fix call that was failing for the wrong reason
cache-tree: verify valid cache-tree in the test suite
This makes sure that cache-tree is consistent with the index. The main
purpose is to catch potential problems by saving the index in
unpack_trees() but the line in write_index() would also help spot
missing invalidation in other code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any changes to the output index should be (confusingly) marked in the
source index with invalidate_ce_path(). This is used to make sure we
still have valid untracked cache and cache-tree extensions in the end.
We do a pretty good job of invalidating except in two places.
verify_clean_subdirectory() is part of verify_absent() and
verify_absent_sparse(). The former is usually called by merged_entry()
or directly in threeway_merge(). The latter is obviously used by
sparse checkout.
In these three call sites, only merged_entry() follows up with
invalidate_ce_path(). The other two don't, but they should not trigger
this ce removal because this is about D/F conflicts [1]. But let's be
safe and invalidate_ce_path() here as well.
The second place is keep_entry() which is also used by threeway_merge()
to keep higher stage entries. In order to reuse cache-tree we need to
invalidate these paths as well. It's not a problem in the past because
whenever a higher stage entry is present, cache-tree will not be
created [2]. Now we salvage cache-tree even when higher stage entries
are present, we need more invalidation.
[1] c81935348b (Fix switching to a branch with D/F when current branch
has file D. - 2007-03-15)
[2] This is probably too strict. We should be able to create and save
cache-tree for the directories that do not have conflict entries
in cache_tree_update(). And this becomes more important when
cache-tree plays bigger role in terms of performance.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack-trees: reuse (still valid) cache-tree from src_index
We do n-way merge by walking the source index and n trees at the same
time and add merge results to a new temporary index called o->result.
The merge result for any given path could be either
- keep_entry(): same old index entry in o->src_index is reused
- merged_entry(): either a new entry is added, or an existing one updated
- deleted_entry(): one entry from o->src_index is removed
For some reason [1] we keep making sure that the source index's
cache-tree is still valid if used by o->result: for all those
merged/deleted entries, we invalidate the same path in o->src_index,
so only cache-trees covering the "keep_entry" parts remain good.
Because of this, the cache-tree from o->src_index can be perfectly
reused in o->result. And in fact we already rely on this logic to
reuse untracked cache in edf3b90553 (unpack-trees: preserve index
extensions - 2017-05-08). Move the cache-tree to o->result before
doing cache_tree_update() to reduce hashing cost.
Since cache_tree_update() has risen up as one of the most expensive
parts in unpack_trees() after the last few patches. This does help
reduce unpack_trees() time significantly (on webkit.git):
[1] I'm pretty sure the reason is an oversight in 34110cd4e3 (Make
'unpack_trees()' have a separate source and destination index -
2008-03-06). That patch aims to _not_ update the source index at
all. The invalidation should have been done on o->result in that
patch. But then there was no cache-tree on o->result even then so
it's pointless to do so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a micro optimization that probably only shines on repos with
deep directory structure. Instead of allocating and freeing a new
cache_entry in every iteration, we reuse the last one and only update
the parts that are new each iteration.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack-trees: optimize walking same trees with cache-tree
In order to merge one or many trees with the index, unpack-trees code
walks multiple trees in parallel with the index and performs n-way
merge. If we find out at start of a directory that all trees are the
same (by comparing OID) and cache-tree happens to be available for
that directory as well, we could avoid walking the trees because we
already know what these trees contain: it's flattened in what's called
"the index".
The upside is of course a lot less I/O since we can potentially skip
lots of trees (think subtrees). We also save CPU because we don't have
to inflate and apply the deltas. The downside is of course more
fragile code since the logic in some functions are now duplicated
elsewhere.
"checkout -" with this patch on webkit.git (275k files):
This command calls unpack_trees() twice, the first time on 2way merge
and the second 1way merge. In both times, "unpack trees" time is
reduced to one third. Overall time reduction is not that impressive of
course because index operations take a big chunk. And there's that
repair cache-tree line.
PS. A note about cache-tree invalidation and the use of it in this
code.
We do invalidate cache-tree in _source_ index when we add new entries
to the (temporary) "result" index. But we also use the cache-tree from
source index in this optimization. Does this mean we end up having no
cache-tree in the source index to activate this optimization?
The answer is twisted: the order of finding a good cache-tree and
invalidating it matters. In this case we check for a good cache-tree
first in all_trees_same_as_cache_tree(), then we start to merge things
and potentially invalidate that same cache-tree in the process. Since
cache-tree invalidation happens after the optimization kicks in, we're
still good. But we may lose that cache-tree at the very first
call_unpack_fn() call in traverse_by_cache_tree().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're going to optimize unpack_trees() a bit in the following
patches. Let's add some tracing to measure how long it takes before
and after. This is the baseline ("git checkout -" on webkit.git, 275k
files on worktree)
Performance measurements are listed right now as a flat list, which is
fine when we measure big blocks. But when we start adding more and
more measurements, some of them could be just part of a bigger
measurement and a flat list gives a wrong impression that they are
executed at the same level instead of nested.
Add trace_performance_enter() and trace_performance_leave() to allow
indent these nested measurements. For now it does not help much
because the only nested thing is (lazy) name hash initialization
(e.g. called in diff-index from "git status"). This will help more
because I'm going to add some more tracing that's actually nested.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t2024: mark test using "checkout -p" with PERL prerequisite
Checkout with the -p switch uses the "add interactive" framework which
is written in Perl.
One test added in 8d7b558bae ("checkout & worktree: introduce
checkout.defaultRemote", 2018-06-05) didn't declare the PERL
prerequisite, breaking the test when built with NO_PERL.
Reported-by: CB Bailey <cb@hashpling.org> Signed-off-by: CB Bailey <cb@hashpling.org> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller of maybe_colorize_sideband() gives a counted buffer
<src, n>, but the callee checked src[] as if it were a NUL terminated
buffer. If src[] had all isspace() bytes in it, we would have made
n negative, and then
(1) made number of strncasecmp() calls to see if the remaining
bytes in src[] matched keywords, reading beyond the end of the
array (this actually happens even if n does not go negative),
and/or
(2) called strbuf_add() with negative count, most likely triggering
the "you want to use way too much memory" error due to unsigned
integer overflow.
Fix both issues by making sure we do not go beyond &src[n].
In the longer term we may want to accept size_t as parameter for
clarity (even though we know that a sideband message we are painting
typically would fit on a line on a terminal and int is sufficient).
Write it down as a NEEDSWORK comment.
Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the '--quiet' option to git worktree, as for the other git
commands. 'add' is the only command affected by it since all other
commands, except 'list', are currently silent by default.
[jc: appiled trivial fix-up to keep the tests from touching outside
the scratch area]
Helped-by: Martin Ågren <martin.agren@gmail.com> Helped-by: Duy Nguyen <pclouds@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge --abort" etc. did not clean things up properly when
there were conflicted entries in the index in certain order that
are involved in D/F conflicts. This has been corrected.
The http-backend (used for smart-http transport) used to slurp the
whole input until EOF, without paying attention to CONTENT_LENGTH
that is supplied in the environment and instead expecting the Web
server to close the input stream. This has been fixed.
* mk/http-backend-content-length:
t5562: avoid non-portable "export FOO=bar" construct
http-backend: respect CONTENT_LENGTH for receive-pack
http-backend: respect CONTENT_LENGTH as specified by rfc3875
http-backend: cleanup writing to child process
A few atoms like %(objecttype) and %(objectsize) in the format
specifier of "for-each-ref --format=<format>" can be filled without
getting the full contents of the object, but just with the object
header. These cases have been optimized by calling
oid_object_info() API (instead of reading and inspecting the data).
* ot/ref-filter-object-info:
ref-filter: use oid_object_info() to get object
ref-filter: merge get_obj and get_object
ref-filter: initialize eaten variable
ref-filter: fill empty fields with empty values
ref-filter: add info_source to valid_atom
Noiseword "extern" has been removed from function decls in the
header files.
* nd/no-extern:
submodule.h: drop extern from function declaration
revision.h: drop extern from function declaration
repository.h: drop extern from function declaration
rerere.h: drop extern from function declaration
line-range.h: drop extern from function declaration
diff.h: remove extern from function declaration
diffcore.h: drop extern from function declaration
convert.h: drop 'extern' from function declaration
cache-tree.h: drop extern from function declaration
blame.h: drop extern on func declaration
attr.h: drop extern from function declaration
apply.h: drop extern on func declaration
The parse-options machinery learned to refrain from enclosing
placeholder string inside a "<bra" and "ket>" pair automatically
without PARSE_OPT_LITERAL_ARGHELP. Existing help text for option
arguments that are not formatted correctly have been identified and
fixed.
* rs/parse-opt-lithelp:
parse-options: automatically infer PARSE_OPT_LITERAL_ARGHELP
shortlog: correct option help for -w
send-pack: specify --force-with-lease argument help explicitly
pack-objects: specify --index-version argument help explicitly
difftool: remove angular brackets from argument help
add, update-index: fix --chmod argument help
push: use PARSE_OPT_LITERAL_ARGHELP instead of unbalanced brackets
"git fetch $there refs/heads/s" ought to fetch the tip of the
branch 's', but when "refs/heads/refs/heads/s", i.e. a branch whose
name is "refs/heads/s" exists at the same time, fetched that one
instead by mistake. This has been corrected to honor the usual
disambiguation rules for abbreviated refnames.
* jt/refspec-dwim-precedence-fix:
remote: make refspec follow the same disambiguation rule as local refs
The test performed at the receiving end of "git push" to prevent
bad objects from entering repository can be customized via
receive.fsck.* configuration variables; we now have gained a
counterpart to do the same on the "git fetch" side, with
fetch.fsck.* configuration variables.
* ab/fsck-transfer-updates:
fsck: test and document unknown fsck.<msg-id> values
fsck: add stress tests for fsck.skipList
fsck: test & document {fetch,receive}.fsck.* config fallback
fetch: implement fetch.fsck.*
transfer.fsckObjects tests: untangle confusing setup
config doc: elaborate on fetch.fsckObjects security
config doc: elaborate on what transfer.fsckObjects does
config doc: unify the description of fsck.* and receive.fsck.*
config doc: don't describe *.fetchObjects twice
receive.fsck.<msg-id> tests: remove dead code
clone: report duplicate entries on case-insensitive filesystems
Paths that only differ in case work fine in a case-sensitive
filesystems, but if those repos are cloned in a case-insensitive one,
you'll get problems. The first thing to notice is "git status" will
never be clean with no indication what exactly is "dirty".
This patch helps the situation a bit by pointing out the problem at
clone time. Even though this patch talks about case sensitivity, the
patch makes no assumption about folding rules by the filesystem. It
simply observes that if an entry has been already checked out at clone
time when we're about to write a new path, some folding rules are
behind this.
In the case that we can't rely on filesystem (via inode number) to do
this check, fall back to fspathcmp() which is not perfect but should
not give false positives.
This patch is tested with vim-colorschemes and Sublime-Gitignore
repositories on a JFS partition with case insensitive support on
Linux.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refactor various if (x) FREE_AND_NULL(x) to just FREE_AND_NULL(x)
Change the few conditional uses of FREE_AND_NULL(x) to be
unconditional. As noted in the standard[1] free(NULL) is perfectly
valid, so we might as well leave this check up to the C library.
The description of this key does not really tell what the 'minimal'
mode checks and does not check. The description for the 'default'
mode is not much better and just says 'all fields', which is unclear
and is not even correct (e.g. we do not look at 'atime').
Spell out what are and what are not checked under the 'minimal' mode
relative to the 'default' mode to help those who want to decide if
they want to use the 'minimal' mode, also taking information about
this mode from the commit message of c08e4d5b5c (Enable minimal stat
checking - 2013-01-22).
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skip merging the commit, updating the index and working directory if and
only if we are creating a new branch via "git checkout -b <new_branch>."
Any other checkout options will still go through the former code path.
If sparse_checkout is on, require the user to manually opt in to this
optimzed behavior by setting the config setting checkout.optimizeNewBranch
to true as we will no longer update the skip-worktree bit in the index, nor
add/remove files in the working directory to reflect the current sparse
checkout settings.
For comparison, running "git checkout -b <new_branch>" on a large repo takes:
14.6 seconds - without this patch
0.3 seconds - with this patch
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for configuring default sort ordering for git branches. Command
line option will override this configured value, using the exact same
syntax.
Signed-off-by: Samuel Maftoul <samuel.maftoul@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: move 'layer' into 'struct packing_data'
This reduces the size of 'struct object_entry' from 88 bytes
to 80 and therefore makes packing objects more efficient.
For example on a Linux repo with 12M objects,
`git pack-objects --all` needs extra 96MB memory even if the
layer feature is not used.
Helped-by: Jeff King <peff@peff.net> Helped-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>