Replace unsetenv() and setenv() with older putenv().
Solaris 8 doesn't have the newer unsetenv() and setenv()
functions, so replace them with putenv(). The one use of
unsetenv() in fsck-cache.c now sets GIT_ALTERNATE_OBJECT_
DIRECTORIES to the empty string. Every place that var
is used, NULLs are also replaced with empty strings, so
it's ok.
Omitting the first branch in ?: is a GNU extension. Cute,
but not supported by other compilers. Replaced mostly
by explicit tests. Calls to getenv() simply are repeated
on non-GNU compilers.
This trivial patch makes "git-rev-list" able to handle not being in
the top-level directory. This magically also makes "git-whatchanged"
do the right thing.
Trivial scripting fix to make sure that "git log" also works.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
I have been feeling that the current behaviour of "git reset" is
not quite optimal, but so far could not express exactly what I
felt was wrong with it. This patch clarifies it.
There are at least two situations you may want to "reset" your
working tree.
1. You made a mess in your working tree. You want to switch
back to a known good state and start over. This mess may be
a result of your own editing, a merge that had too many
conflicting changes that you do not feel like to resolve by
hand at this moment, or a botched application of a patch you
received from somewhere.
In this case, you would want to have "git reset HEAD" reset
the index file to the tree read from the HEAD commit and the
files in the working tree to match index (i.e. "git status"
should say "Nothing to commit", without any "unrecorded
changes").
The current behaviour leaves the files in the working tree
intact, which requires you to run "git checkout -f". Also
you need to remember "rm -f" any files that the botched patch
may have left in the working tree if the purpose of this
"reset" is to attempt to apply it again; most likely the
patch would fail if such a file is left behind.
2. You have discovered that commits you made earlier need to be
reorganized. The simplest example is to undo the last
commit, re-edit some files, and redo the commit. Another
simple eample is to undo the last two commits, and commit the
changes in those two commits as a single commit.
In this case, you would want to have "git reset HEAD^" reset
the $GIT_DIR/HEAD to the commit object name of the parent
commit of the current commit (i.e. rewinding one commit),
leave the index file and the files in the working tree in a
state where you can easily make a commit that records a tree
that resembles what you have in the current index file and
the working tree.
The current behaviour is almost OK for this purpose, except
that you need to find which files you need to manually run
"git add" yourself. They are files that are in the original
HEAD commit and not in the commit you are resetting to.
The default without the type flag is to do "--mixed", which is
the current behaviour.
A hard reset would be used for 1 and works in this way:
(1) remember the set of paths that appear in the current
index file (which may even have unmerged entries) and
the current $GIT_DIR/HEAD commit.
(2) "read-tree --reset" the specified <commit-ish> (default
to HEAD), followed by "checkout-cache -f -u -a".
(3) remove any files that appear in (1) but not in
<commit-ish> from the working tree.
(4) backup $GIT_DIR/HEAD to $GIT_DIR/ORIG_HEAD and update
$GIT_DIR/HEAD with the specified <commit-ish>.
(5) remove leftover $GIT_DIR/MERGE_HEAD
A soft reset would be used for 2 and works in this way:
(1) Make sure that the index file is merged and we do not
have MERGE_HEAD; otherwise it does not make sense to do
soft reset.
(2) backup $GIT_DIR/HEAD to $GIT_DIR/ORIG_HEAD and update
$GIT_DIR/HEAD with the specified <commit-ish>.
Note that with the current behaviour, "git diff" is the way to
see what could be committed immediately after "git reset". With
the "soft reset" described here you would need to say "git diff
HEAD" to find that out.
I am not sure what mixed reset (the current behaviour) is good
for. If nobody comes up with a good use case it may not be a
bad idea to remove it.
Clean-up output from"git show-branch" and document it.
When showing only one branch a lot of default output becomes redundant,
so clean it up a bit, and document what is shown. Retire the earlier
implementation "git-show-branches-script".
The 'git show-branches' command turns out to be reasonably useful,
but painfully slow. So rewrite it in C, using ideas from merge-base
while enhancing it a bit more.
- Unlike show-branches, it can take --heads (show me all my
heads), --tags (show me all my tags), or --all (both).
- It can take --more=<number> to show beyond the merge-base.
- It shows the short name for each commit in the extended SHA1
syntax.
- It can find merge-base for more than two heads.
Examples:
$ git show-branch --more=6 HEAD
is almost the same as "git log --pretty=oneline --max-count=6".
$ git show-branch --merge-base master mhf misc
finds the merge base of the three given heads.
$ git show-branch master mhf misc
shows logs from the top of these three branch heads, up to their
common ancestor commit is shown.
$ git show-branch --all --more=10
is poor-man's gitk, showing all the tags and heads, and
going back 10 commits beyond the merge base of those refs.
[PATCH] Add a new extended SHA1 syntax <name>~<num>
The new notation is a short-hand for <name> followed by <num>
caret ('^') characters. E.g. "master~4" is the fourth
generation ancestor of the current "master" branch head,
following the first parents; same as "master^^^^" but a bit
more readable.
This will be used in the updated "git show-branch" command.
When "git-diff-script A..B" notation was introduced, it ended up breaking
the traditional two revisions notation.
[jc: there are other issues with the current "git diff" I would like to
address, but they would be left to later rounds. For example, -M and -p flags
should not be hardcoded default, and it shouldn't be too hard to rewrite
the script without using shell arrays.]
This generalizes the git "glob" string to be a lot more like the
git-diff-* pathspecs (but there are still differences: the diff family
doesn't do any globbing, and because the diff family always generates the
full native pathname, it doesn't have the issue with "..").
It does three things:
- it allows multiple matching strings, ie you can do things like
- the "matching" criteria is a combination of "exact path component
match" (the same as the git-diff-* family), and "fnmatch()". However,
you should be careful with the confusion between the git-ls-files
internal globbing and the standard shell globbing, ie
git-ls-files fs/*.c
does globbing in the shell, and does something totally different from
git-ls-files 'fs/*.c'
which does the globbing inside git-ls-files.
The latter has _one_ pathspec with a wildcard, and will match any .c
file anywhere under the fs/ directory, while the former has been
expanded by the shell into having _lots_ of pathspec entries, all of
which are just in the top-level fs/ subdirectory. They will happily
be matched exactly, but we will thus miss all the subdirectories under
fs/.
As a result, the first one will (on the current kernel) match 55 files,
while the second one will match 664 files!
- it uses the generic path prefixing, so that ".." and friends at the
beginning of the path spec work automatically
NOTE! When generating relative pathname output (the default), a
pathspec that causes the base to be outside the current working
directory will be rejected with an error message like:
[PATCH] Make "git-ls-files" work in subdirectories
This makes git-ls-files work inside a relative directory, and also adds
some rudimentary filename globbing support. For example, in the kernel you
can now do
cd arch/i386
git-ls-files
and it will show all files under that subdirectory (and it will have
removed the "arch/i386/" prefix unless you give it the "--full-name"
option, so that you can feed the result to "xargs grep" or similar).
The filename globbing is kind of strange: it does _not_ follow normal
globbing rules, although it does look "almost" like a normal file glob
(and it uses the POSIX.2 "fnmatch()" function).
The glob pattern (there can be only one) is always split into a "directory
part" and a "glob part", where the directory part is defined as any full
directory path without any '*' or '?' characters. The "glob" part is
whatever is left over.
For example, when doing
git-ls-files 'arch/i386/p*/*.c'
the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c".
The directory part will be added to the prefix, and handled efficiently
(ie we will not be searching outside of that subdirectory), while the glob
part (if anything is left over) will be used to trigger "fnmatch()"
matches.
This is efficient and very useful, but can result in somewhat
non-intuitive behaviour.
For example:
git-ls-files 'arch/i386/*.[ch]'
will find all .c and .h files under arch/i386/, _including_ things in
lower subdirectories (ie it will match "arch/i386/kernel/process.c",
because "kernel/process.c" will match the "*.c" specifier).
Also, while
git-ls-files arch/i386/
will show all files under that subdirectory, doing the same without the
final slash would try to show the file "i386" under the "arch/"
subdirectory, and since there is no such file (even if there is such a
_directory_) it will not match anything at all.
These semantics may not seem intuitive, but they are actually very
practical. In particular, it makes it very simple to do
git-ls-files fs/*.c | xargs grep some_pattern
and it does what you want.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
I think Linus did a cut & paste from an early JIT code while
developing the current extended SHA1 notation, and left it there as a
courtesy, but the directory does not deserve to be treated any more
specially than, say, .git/refs/bisect.
If the subdirectories under .git/refs proliferate, we may want to
switch to scanning that hierarchy at runtime, instead of the current
hard-coded set, although I think that would be overkill.
Signed-off-by: Junio C Hamano <junkio@cox.net>
From nobody Mon Sep 17 00:00:00 2001
Subject: [PATCH] Add a new extended SHA1 syntax <name>:<num>
From: Junio C Hamano <junkio@cox.net>
Date: 1124617434 -0700
The new notation is a short-hand for <name> followed by <num>
caret ('^') characters. E.g. "master:4" is the fourth
generation ancestor of the current "master" branch head,
following the first parents; same as "master^^^^" but a bit more
readable.
This will be used in the updated "git show-branch" command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
---
+static int get_nth_ancestor(const char *name, int len,
+ unsigned char *result, int generation)
+{
+ unsigned char sha1[20];
+ int ret = get_sha1_1(name, len, sha1);
+ if (ret)
+ return ret;
+
+ while (generation--) {
+ struct commit *commit = lookup_commit_reference(sha1);
+
+ if (!commit || parse_commit(commit) || !commit->parents)
+ return -1;
+ memcpy(sha1, commit->parents->item->object.sha1, 20);
+ }
+ memcpy(result, sha1, 20);
+ return 0;
+}
+
static int get_sha1_1(const char *name, int len, unsigned char *sha1)
{
int parent, ret;
+ const char *cp;
/* foo^[0-9] or foo^ (== foo^1); we do not do more than 9 parents. */
if (len > 2 && name[len-2] == '^' &&
@@ -210,6 +230,27 @@ static int get_sha1_1(const char *name,
if (parent >= 0)
return get_parent(name, len, sha1, parent);
+ /* name:3 is name^^^,
+ * name:12 is name^^^^^^^^^^^^, and
+ * name: is name
+ */
+ parent = 0;
+ for (cp = name + len - 1; name <= cp; cp--) {
+ int ch = *cp;
+ if ('0' <= ch && ch <= '9')
+ continue;
+ if (ch != ':')
+ parent = -1;
+ break;
+ }
+ if (!parent && *cp == ':') {
+ int len1 = cp - name;
+ cp++;
+ while (cp < name + len)
+ parent = parent * 10 + *cp++ - '0';
+ return get_nth_ancestor(name, len1, sha1, parent);
+ }
+
ret = get_sha1_basic(name, len, sha1);
if (!ret)
return 0;
[PATCH] Fix git-commit-script to output on stderr when -v fails
When git-commit-script is called with -v option and
verify test fails result is print on stdout
instead of stderr.
[jc: The original patch from Marco updated git-commit-script that
still had the piece of code in question, which has been moved to
an example hook script on its own, so I transplanted the patch to
that new file instead.]
Signed-off-by: Marco Costalba <mcostalba@yahoo.it> Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] Allow file removal when "git commit --all" is used.
After you deleted files from your working tree, automatic
git-update-cache used when the "--all" flag is given to "git
commit" barfs because it lacks the --remove flag.
It can be argued that this is a feature; people should be
careful and something with a grave consequence like removing
files should be done manually, in which case the current
behaviour may be OK.
The patch is for people who thinks the user who uses the "--all"
flag deserves the danger that comes with the convenience.
[PATCH] Fix git-format-patch-script to handle empty messages
In case of a commit with an empty message there is no
mandatory empty line between headers and body
[jc: This makes --mbox output valid even when the commit message does
not have anything but its first line, which the one I wrote botched.
One side-effect is that it adds an extra blank line at the end even if
it has more than one lines, which will be eaten by the receiving end.
As Marco says, this is a stop-gap measure. This script needs to be
split into two, one that gets the format specifier and a commit ID to
write to its standard output, and another that drives that one reading
from rev-list. I'll fix things properly when that happens by
rewriting the former part in Perl or something more reasonable than
the current shell, sed and grep mishmash.]
Signed-off-by: Marco Costalba <mcostalba@yahoo.it> Signed-off-by: Junio C Hamano <junkio@cox.net>
Display the contents of a tag when the user clicks on it.
This just displays the result of git-cat-file on the tag in the
details pane. If the tag is a "direct" tag (the tag file contains
the SHA1 ID of a commit rather than a tag), we show the tag name
and SHA1 ID.
These are features requested by Junio. Any plain file under .git/refs
whose contents start with 40 hex characters is taken as a reference
and displayed like a head but with a light blue background (unless it
is in .git/refs/tags or .git/refs/heads, in which case it is displayed
as before). There is now a "Reread references" menu item in the File
menu which re-reads all the plain files under .git/refs and redisplays
any references that have changed.
This makes git-applymbox verify that the index matches the current HEAD
before it starts applying patches.
Otherwise, you might have updated the index with unrelated changes, and
the first patch will commit not just the patch from the mbox, but also any
changes you had in your index.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
With --parents, git-rev-list gives us the list of parents on the
first line of each commit. We use that rather than looking for
the parent: lines in the commit body, since this way we get to
know about the grafts for free.
Based on the discussion on the git list, here are some important changes
to the glossary. (There is no cache, but an index. Use "object name"
rather than "SHA1". Reorder. Clarify.)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
When the graph gets too wide (as defined by the maxwidth variable,
which can be set in ~/.gitk), we can now terminate graph lines with
an arrow pointing downwards, and reintroduce them later with an
arrow pointing upwards when we need them. This makes the graph much
less cluttered on large repositories such as the linux kernel.
Unfortunately this has made it slower; it takes about 10 seconds
user time on the linux-2.6 repository on my machine now, compared
to 6 seconds before. I'll have to work on optimizing that. Also
on the todo list are making the arrow heads active (so if you click
on them you jump to the other end) and improving the placement of
the null entry.
It did not check to see if the working tree was clean and matched
the commit we were starting out as, resulting in the initial rebased
commit including whatever dirty state the working tree has had.
Make sure alternates are carried over from the original repository.
When we create a cheap local clone by pointing at the object databse
of the original repository, we forgot to take the alternates the original
repository might have had into account.
The earlier one to grab output from diff-files --name-only has a grave
bug that when no paths are given it ended up doing the equivalent of
"git-commit --all", which was not what I intended.
[PATCH] Export relative path handling "prefix_path()" function
Not all programs necessarily have a pathspec array of pathnames, some of
them (like git-update-cache) want to do things one file at a time. So
export the single-path interface too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Added -m and -M flags for git-cvsimport to detect merge commits in cvs.
While this trusts the commit message, in repositories where merge commits
indicate 'merged from FOOBRANCH' the import works surprisingly well.
Even if some merges from CVS are bogus or incomplete, the resulting
branches are in better state to go forward (and merge) than without any
merge detection.
Signed-off-by: Martin Langhoff <martin.langhoff@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: This is the version without asciidoc cross references;
Johannes says that the cross referenced one is generated from
this file using a Perl script, so I am placing this as the
source, and expecting to later receive the script and a Makefile
entry or two to massage this file into the final HTML or
whatever form.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] use it's and its correctly in documentation
At one place in Documentation/tutorial.txt and several in the base
README, its was wrongly used in place of it's or vice versa. One
instance remains somewhere in Documentation/howto/, which I didn't
correct because it's in a quotation.
Signed-off-by: Greg Louis <glouis@dynamicro.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] Also handle CVS branches with a '/' in their name
I track a CVS project which has a branch with a '/' in the branch name.
Since git wants the branch name to be a file name at the same time,
substitute that character to a '-' by default (override with "-s <subst>").
This should work well, despite the fact that a division and a difference
are completely different :-)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
When running "git commit" with explicit path arguments, allow it to
take directory name. This makes "git commit Documentation/" to commit
everything that is changed under Documentation/ directory.
This corresponds to the -k flag to git format-patch --mbox
option. The option should probably not be used when applying a
real e-mail patch, but is needed when format-patch and applymbox
pair is used for cherrypicking.
Use LF and allow comments in objects/info/alternates file.
Yes, using the same format for the file and the environment variable
was a big mistake. This uses LF as the path separator, and allows
lines that begin with '#' to be comments. ':' is no longer a separator
in objects/info/alternates file.
Introduces --keep-subjects flag to tell it not to munge the
first line of the commit message. Running "git applymbox" on
the output from "git format-patch -m -k" would preserve the
original commit information better this way.
[PATCH] Improve handling of "." and ".." in git-diff-*
This fixes up usage of ".." (without an ending slash) and "." (with or
without the ending slash) in the git diff family.
It also fixes pathspec matching for the case of an empty pathspec, since a
"." in the top-level directory (or enough ".." under subdirectories) will
result in an empty pathspec. We used to not match it against anything, but
it should in fact match everything.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] Make "git diff" work inside relative subdirectories
We always show the diff as an absolute path, but pathnames to diff are
taken relative to the current working directory (and if no pathnames are
given, the default ends up being all of the current working directory).
Note that "../xyz" also works, so you can do
cd linux/drivers/char
git diff ../block
and it will generate a diff of the linux/drivers/block changes.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] Add a bit more links to the commands to the main git(7) page.
There are many programs like git-add not described at all, and the
organization of the list of commands may be suboptimal, but we have to
start somewhere.
Because there is no reason not to, and this makes things a bit
safer when running "git prune".
[jc: I do not necessarily agree with the reasoning of the
original author that it is a good way to keep "git prune" from
stomping on objects to have a symlink that points at .git/refs
of the repository A in the .git/refs of the repository B when
repository A borrows object database from repository B. For one
thing, the object database that everybody borrows objects from
may not even have its own .git/refs hierarchy. Come to think of
it, maybe we should disallow symlink inside .git/refs hierarchy;
we update the files there by creat/rename pair, so having
symlinks would not work anyway when you do anything that would
update them.]
Early versions of git-cvsimport defaulted to using preexisting keyword
expansion settings. This change preserves compatibility with existing cvs
imports and allows new repository migrations to kill keyword expansion.
After exploration of the different -k modes in the cvs protocol, we use -kk
which kills keyword expansion wherever possible. Against the protocol
spec, -ko and -kb will sometimes expand keywords.
Should improve our chances of detecting merges and reduce imported
repository size.
Signed-off: Martin Langhoff <martin.langhoff@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
The patch mixed up the sha1 for the object being pulled, and the
sha1 the pull engine internally use to represent the name of the
pack that contains the object being pulled.
[PATCH] cvsgit fixes: spaces in filenames and CVS server dialog woes
Problems found while importing dasher's CVS:
* Allow spaces in filenames.
* cvsps may create unnamed branches with revisions that don't really
exist, which causes the CVS server to return something we haven't
hitherto expected.
* Report deleted files when being verbose.
* Also, report the commit date. Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] Make git-format-patch's signoff option more consistent
Since git-commit-script has a "--signoff" option, use that in
git-format-patch-script, too (and since partial option names are
supported,"--sign" is still valid).
Also, if the message already contains the S-O-B line, silently ignore the
"--signoff" request.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
The recent change to give the multiple commit message source was not
carrying over the authorship information from -C/-c commits correctly.
The export of the environment variable happens only in the subprocess,
not the main process that eventually runs git-commit-tree.
The right fix might be to teach git-commit-script to grok the From:
and Date: lines at the beginning of the commit message just like
git-applymbox knows how, but this has to do until that enhancement
happens.
[PATCH] Add documentation for git repack and git-prune-packed.
[jc: the patch forgot to update the main git.txt documentation,
making all these new documentation practically no-op, so I added
a minimum attempt linking them from there.]
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Makes git work with a pure POSIX shell (tested with bash --posix and ash).
Right now git causes ash to choke on the redundant shift on line two.
Reduces the number of system calls git makes just to do a usage
statement from 22610 to 1122, and the runtime for same from 349ms to
29ms on my x86 Linux box.
Presents a standard usage statement, and pretty prints the available
commands in a form that does not scroll off small terminals.
[jc: while shifting when $# was zero was a bug, the original
patch failed to shift when it needs to, which I fixed up.]
Signed-off-by: Amos Waterland <apw@rossby.metr.ou.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
Keep excellent tutorial for using topic branches by Tony Luck
I would eventually like to move this to become a part of the tutorial,
but anyway, this was an excellent post that describes how topic
branches can be used to keep track of local changes.
Often I find myself wanting to do quick branches check when I am
not in the windowing environment and cannot run gitk.
This stupid script shows commits leading to the heads of
interesting branches with indication which ones belong to which
branches, so that fork point is somewhat discernible without
using gitk.
[PATCH] Add some simple howtos, culled from the mailing list.
I think these are useful, and I think putting them in a new "howto"
directory might help some users until we get to the point of splitting
up the tutorial to be easier to read.
Given the authorship, I think it's safe to put these in the repository.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Add sample code to distinguish --force rebased head and simple
fast-forward. At the same time fixes a real bug; the "new ref"
path was using a wrong parameter.
Add cheap local clone '-s' flag to git-clone-script
Using the $GIT_OBJECT_DIRECTORY/info/alternates mechanism,
create a new repository that borrows objects from the original
repository when --shared flag is given in addition to --local.
It is worth pointing out that the "cloned" repository depends on
the original repository, so this should be used only when you
can reasonably trust that the original repository would not
disappear without your knowing.
It was a mistake to use GIT_ALTERNATE_OBJECT_DIRECTORIES
environment variable to specify what alternate object pools to
look for missing objects when working with an object database.
It is not a property of the process running the git commands,
but a property of the object database that is partial and needs
other object pools to complete the set of objects it lacks.
This patch allows you to have $GIT_OBJECT_DIRECTORY/info/alternates
whose contents is in exactly the same format as the environment
variable, to let an object database name alternate object pools
it depends on.
Linus brought up that documentation for many commands have
incorrect attribution. I started counting lines again, but
ended up adding a handful of missing manual pages.
[PATCH] plug memory leak in diff.c::diff_free_filepair()
When I run git-diff-tree on big change, it seems the command eats so
much memory. so I just put git under valgrind to see what's going on.
diff_free_filespec_data() doesn't free diff_filespec itself.
[jc: I ended up doing things slightly differently from Yasushi's
patch. The original idea was to use free_filespec_data() only to
free the data portion and keep useing the filespec itself, but
no existing code seems to do things that way, so I just yanked
that part out.]
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
It seems that the localtime() libc routine doesn't care for finding a TZ
that's empty. It's ok with TZ not being set. Setting the TZ to GMT allowed
these tests to pass.
$ uname -v
Darwin Kernel Version 7.9.0: Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
Signed-off-by: Brad Roberts <braddr@puremagic.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
The index cleanup code is executed via atexit() which is *after* main
has completed, so the stack allocated cache_file has gone out of scope.
Parisc seems to use stack in the destructor functions, so cache_file
gets partially overwritten leading to the predictable disastrous
consequences.
[jc: Just to make sure, I audited other users of the function
hold_index_file_for_update() to make sure they do not have this
problem; everybody else uses non-stack cache_file structure and
is fine. Thanks, James.]
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
The "get_sha1_hex()" function is designed to work with SHA1 hex strings
that may be followed by arbitrary crud. However, that's not acceptable for
"get_sha1()" which is used for command line arguments etc: we don't want
to silently allow random characters after the end of the SHA1.
So verify that the hex string is all we have.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] Make sure git-resolve-script always works on commits
You can resolve a tag, and it does the right thing except that it might
end up writing the tag itself into the resulting HEAD, which will confuse
subsequent operations no end.
This makes sure that when we resolve two heads, we will have turned them
into proper commits before we start acting on them.
This also fixes the parsing of "treeish^0", which would incorrectly
resolve to "treeish" instead of causing an error.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>