gitweb.git
Merge branch 'md/list-lazy-objects-fix'Junio C Hamano Mon, 14 Jan 2019 23:29:28 +0000 (15:29 -0800)

Merge branch 'md/list-lazy-objects-fix'

"git rev-list --exclude-promisor-objects" had to take an object
that does not exist locally (and is lazily available) from the
command line without barfing, but the code dereferenced NULL.

* md/list-lazy-objects-fix:
list-objects.c: don't segfault for missing cmdline objects

read-cache.c: remove the_* from index_has_changes()Nguyễn Thái Ngọc Duy Sat, 12 Jan 2019 02:13:31 +0000 (09:13 +0700)

read-cache.c: remove the_* from index_has_changes()

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

merge-recursive.c: remove implicit dependency on the_re... Nguyễn Thái Ngọc Duy Sat, 12 Jan 2019 02:13:30 +0000 (09:13 +0700)

merge-recursive.c: remove implicit dependency on the_repository

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

merge-recursive.c: remove implicit dependency on the_indexNguyễn Thái Ngọc Duy Sat, 12 Jan 2019 02:13:29 +0000 (09:13 +0700)

merge-recursive.c: remove implicit dependency on the_index

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

sha1-name.c: remove implicit dependency on the_indexNguyễn Thái Ngọc Duy Sat, 12 Jan 2019 02:13:28 +0000 (09:13 +0700)

sha1-name.c: remove implicit dependency on the_index

This kills the_index dependency in get_oid_with_context() but for
get_oid() and friends, they still assume the_repository (which also
means the_index).

Unfortunately the widespread use of get_oid() will make it hard to
make the conversion now. We probably will add repo_get_oid() at some
point and limit the use of get_oid() in builtin/ instead of forcing
all get_oid() call sites to carry struct repository.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

read-cache.c: replace update_index_if_able with repo_&Nguyễn Thái Ngọc Duy Sat, 12 Jan 2019 02:13:27 +0000 (09:13 +0700)

read-cache.c: replace update_index_if_able with repo_&

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

read-cache.c: kill read_index()Nguyễn Thái Ngọc Duy Sat, 12 Jan 2019 02:13:26 +0000 (09:13 +0700)

read-cache.c: kill read_index()

read_index() shares the same problem as hold_locked_index(): it
assumes $GIT_DIR/index. Move all call sites to repo_read_index()
instead. read_index_preload() and read_index_unmerged() are also
killed as a consequence.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

checkout: avoid the_index when possibleNguyễn Thái Ngọc Duy Sat, 12 Jan 2019 02:13:25 +0000 (09:13 +0700)

checkout: avoid the_index when possible

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

repository.c: replace hold_locked_index() with repo_hol... Nguyễn Thái Ngọc Duy Sat, 12 Jan 2019 02:13:24 +0000 (09:13 +0700)

repository.c: replace hold_locked_index() with repo_hold_locked_index()

hold_locked_index() assumes the index path at $GIT_DIR/index. This is
not good for places that take an arbitrary index_state instead of
the_index, which is basically everywhere except builtin/.

Replace it with repo_hold_locked_index(). hold_locked_index() remains
as a wrapper around repo_hold_locked_index() to reduce changes in builtin/

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

notes-utils.c: remove the_repository referencesNguyễn Thái Ngọc Duy Sat, 12 Jan 2019 02:13:23 +0000 (09:13 +0700)

notes-utils.c: remove the_repository references

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

grep: use grep_opt->repo instead of explict repo argumentNguyễn Thái Ngọc Duy Sat, 12 Jan 2019 02:13:22 +0000 (09:13 +0700)

grep: use grep_opt->repo instead of explict repo argument

This command is probably the first one that operates on a repository
other than the_repository, in f9ee2fcdfa (grep: recurse in-process
using 'struct repository' - 2017-08-02). An explicit 'struct
repository *' was added in that commit to pass around the repository
that we're supposed to grep from.

Since 38bbc2ea39 (grep.c: remove implicit dependency on the_index -
2018-09-21). 'struct grep_opt *' carries in itself a repository
parameter for grepping. We should now be able to reuse grep_opt to
hold the submodule repo instead of a separate argument, which is just
room for mistakes.

While at there, use the right reference instead of the_repository and
the_index in this code. I was a bit careless in my attempt to kick
the_repository / the_index out of library code. It's normally safe to
just stick the_repository / the_index in bultin/ code, but it's not
the case for grep.

Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Merge branch 'ms/packet-err-check' into jt/fetch-v2... Junio C Hamano Mon, 14 Jan 2019 19:16:04 +0000 (11:16 -0800)

Merge branch 'ms/packet-err-check' into jt/fetch-v2-sideband

* ms/packet-err-check:
pack-protocol.txt: accept error packets in any context
Use packet_reader instead of packet_read_line

partial-clone: add missing 'is' in docChristian Couder Mon, 14 Jan 2019 06:10:52 +0000 (07:10 +0100)

partial-clone: add missing 'is' in doc

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

fetch: fix extensions.partialclone name in error messageChristian Couder Sun, 13 Jan 2019 08:52:19 +0000 (09:52 +0100)

fetch: fix extensions.partialclone name in error message

There is "extensions.partialclone" and "core.partialCloneFilter", but
not "core.partialclone". Only "extensions.partialclone" is meant to
contain a remote name.

While at it, let's wrap the relevant code lines to keep them at a
reasonable length.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

builtin_diff(): read $GIT_DIFF_OPTS closer to useJeff King Fri, 11 Jan 2019 22:17:22 +0000 (17:17 -0500)

builtin_diff(): read $GIT_DIFF_OPTS closer to use

The value returned by getenv() is not guaranteed to remain valid across
other environment function calls. But in between our call and using the
value, we run fill_textconv(), which may do quite a bit of work,
including spawning sub-processes.

We can make this safer by calling getenv() right before we actually look
at its value.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

merge-recursive: copy $GITHEAD stringsJeff King Fri, 11 Jan 2019 22:16:55 +0000 (17:16 -0500)

merge-recursive: copy $GITHEAD strings

If $GITHEAD_1234abcd is set in the environment, we use its value as a
"better branch name" in generating conflict markers. However, we pick
these better names early in the process, and the return value from
getenv() is not guaranteed to stay valid.

Let's make a copy of the returned string. And to make memory management
easier, let's just always return an allocated string from
better_branch_name(), so we know that it must always be freed.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

init: make a copy of $GIT_DIR stringJeff King Fri, 11 Jan 2019 22:16:31 +0000 (17:16 -0500)

init: make a copy of $GIT_DIR string

We pass the result of getenv("GIT_DIR") to init_db() and assume that the
string remains valid. But that's not guaranteed across calls to setenv()
or even getenv(), although it often works in practice. Let's make a copy
of the string so that we follow the rules.

Note that we need to mark it with UNLEAK(), since the value persists
until the end of program (but we have no opportunity to free it).

This patch also handles $GIT_WORK_TREE the same way. It actually doesn't
have as long a lifetime and is probably fine, but it's simpler to just
treat the two side-by-side variables the same.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

config: make a copy of $GIT_CONFIG stringJeff King Fri, 11 Jan 2019 22:15:54 +0000 (17:15 -0500)

config: make a copy of $GIT_CONFIG string

cmd_config() points our source filename pointer at the return value of
getenv(), but that value may be invalidated by further calls to
environment functions. Let's copy it to make sure it remains valid.

We don't need to bother freeing it, as it remains part of the
whole-process global state until we exit.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

commit: copy saved getenv() resultJeff King Fri, 11 Jan 2019 22:15:40 +0000 (17:15 -0500)

commit: copy saved getenv() result

We save the result of $GIT_INDEX_FILE so that we can restore it after
setting it to a new value and running add--interactive. However, the
pointer returned by getenv() is not guaranteed to be valid after calling
setenv(). This _usually_ works fine, but can fail if libc needs to
reallocate the environment block during the setenv().

Let's just duplicate the string, so we know that it remains valid.

In the long run it may be more robust to teach interactive_add() to take
a set of environment variables to pass along to run-command when it
execs add--interactive. And then we would not have to do this
save/restore dance at all. But this is an easy fix in the meantime.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

get_super_prefix(): copy getenv() resultJeff King Fri, 11 Jan 2019 22:15:00 +0000 (17:15 -0500)

get_super_prefix(): copy getenv() result

The return value of getenv() is not guaranteed to remain valid across
multiple calls (nor across calls to setenv()). Since this function
caches the result for the length of the program, we must make a copy to
ensure that it is still valid when we need it.

Reported-by: Yngve N. Pettersen <yngve@vivaldi.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

remote: check config validity before creating rewrite... Jeff King Thu, 22 Nov 2018 17:31:09 +0000 (12:31 -0500)

remote: check config validity before creating rewrite struct

When parsing url.foo.insteadOf, we call make_rewrite() and only then
check to make sure the config value is a string (and return an error if
it isn't). This isn't quite a leak, because the struct we allocate is
part of a global array, but it does leave a funny half-finished struct.

In practice, it doesn't make much difference because we exit soon after
due to the config error anyway. But let's flip the order here to avoid
leaving a trap for somebody in the future.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff: ensure correct lifetime of external_diff_cmdKim Gybels Fri, 11 Jan 2019 20:26:08 +0000 (21:26 +0100)

diff: ensure correct lifetime of external_diff_cmd

According to getenv(3)'s notes:

The implementation of getenv() is not required to be reentrant. The
string pointed to by the return value of getenv() may be statically
allocated, and can be modified by a subsequent call to getenv(),
putenv(3), setenv(3), or unsetenv(3).

Since strings returned by getenv() are allowed to change on subsequent
calls to getenv(), make sure to duplicate when caching external_diff_cmd
from environment.

This problem becomes apparent on Git for Windows since fe21c6b285df
(mingw: reencode environment variables on the fly (UTF-16 <-> UTF-8)),
when the getenv() implementation provided in compat/mingw.c was changed
to keep a certain amount of alloc'ed strings and freeing them on
subsequent calls.

This fixes https://github.com/git-for-windows/git/issues/2007:

$ yes n | git -c difftool.prompt=yes difftool fe21c6b285df fe21c6b285df~100

Viewing (1/404): '.gitignore'
Launch 'bc3' [Y/n]?
Viewing (2/404): 'Documentation/.gitignore'
Launch 'bc3' [Y/n]?
Viewing (3/404): 'Documentation/Makefile'
Launch 'bc3' [Y/n]?
Viewing (4/404): 'Documentation/RelNotes/2.14.5.txt'
Launch 'bc3' [Y/n]?
Viewing (5/404): 'Documentation/RelNotes/2.15.3.txt'
Launch 'bc3' [Y/n]?
Viewing (6/404): 'Documentation/RelNotes/2.16.5.txt'
Launch 'bc3' [Y/n]?
Viewing (7/404): 'Documentation/RelNotes/2.17.2.txt'
Launch 'bc3' [Y/n]?
Viewing (8/404): 'Documentation/RelNotes/2.18.1.txt'
Launch 'bc3' [Y/n]?
Viewing (9/404): 'Documentation/RelNotes/2.19.0.txt'
Launch 'bc3' [Y/n]? error: cannot spawn ¦?: No such file or directory
fatal: external diff died, stopping at Documentation/RelNotes/2.19.1.txt

Signed-off-by: Kim Gybels <kgybels@infogroep.be>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

log: add %S option (like --source) to log --formatIssac Trotts Fri, 11 Jan 2019 06:30:46 +0000 (22:30 -0800)

log: add %S option (like --source) to log --format

Make it possible to write for example

git log --format="%H,%S"

where the %S at the end is a new placeholder that prints out the ref
(tag/branch) for each commit.

Using %d might seem like an alternative but it only shows the ref for the last
commit in the branch.

Signed-off-by: Issac Trotts <issactrotts@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

gc/repack: release packs when neededJohannes Schindelin Sat, 15 Dec 2018 22:04:01 +0000 (14:04 -0800)

gc/repack: release packs when needed

On Windows, files cannot be removed nor renamed if there are still
handles held by a process. To remedy that, we introduced the
close_all_packs() function.

Earlier, we made sure that the packs are released just before `git gc`
is spawned, in case that gc wants to remove no-longer needed packs.

But this developer forgot that gc itself also needs to let go of packs,
e.g. when consolidating all packs via the --aggressive option.

Likewise, `git repack -d` wants to delete obsolete packs and therefore
needs to close all pack handles, too.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

test: test GIT_CURL_VERBOSE=1 shows an errorMasaya Suzuki Thu, 10 Jan 2019 19:33:50 +0000 (11:33 -0800)

test: test GIT_CURL_VERBOSE=1 shows an error

This tests GIT_CURL_VERBOSE shows an error when an URL returns 500. This
exercises the code in remote_curl.

Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

remote-curl: unset CURLOPT_FAILONERRORMasaya Suzuki Thu, 10 Jan 2019 19:33:49 +0000 (11:33 -0800)

remote-curl: unset CURLOPT_FAILONERROR

By not setting CURLOPT_FAILONERROR, curl parses the HTTP response
headers even if the response is an error. This makes GIT_CURL_VERBOSE to
show the HTTP headers, which is useful for debugging.

Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

remote-curl: define struct for CURLOPT_WRITEFUNCTIONMasaya Suzuki Thu, 10 Jan 2019 19:33:48 +0000 (11:33 -0800)

remote-curl: define struct for CURLOPT_WRITEFUNCTION

In order to pass more values for rpc_in, define a struct and pass it as
an additional value.

Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

http: enable keep_error for HTTP requestsMasaya Suzuki Thu, 10 Jan 2019 19:33:47 +0000 (11:33 -0800)

http: enable keep_error for HTTP requests

curl stops parsing a response when it sees a bad HTTP status code and it
has CURLOPT_FAILONERROR set. This prevents GIT_CURL_VERBOSE to show HTTP
headers on error.

keep_error is an option to receive the HTTP response body for those
error responses. By enabling this option, curl will process the HTTP
response headers, and they're shown if GIT_CURL_VERBOSE is set.

Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

http: support file handles for HTTP_KEEP_ERRORMasaya Suzuki Thu, 10 Jan 2019 19:33:46 +0000 (11:33 -0800)

http: support file handles for HTTP_KEEP_ERROR

HTTP_KEEP_ERROR makes it easy to debug HTTP transport errors. In order
to make HTTP_KEEP_ERROR enabled for all requests, file handles need to
be supported.

Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

upload-pack: teach deepen-relative in protocol v2Jonathan Tan Tue, 18 Dec 2018 21:24:35 +0000 (13:24 -0800)

upload-pack: teach deepen-relative in protocol v2

Commit 685fbd3291 ("fetch-pack: perform a fetch using v2", 2018-03-15)
attempted to teach Git deepen-relative in protocol v2 (among other
things), but it didn't work:

(1) fetch-pack.c needs to emit "deepen-relative".
(2) upload-pack.c needs to ensure that the correct deepen_relative
variable is passed to deepen() (there are two - the static variable
and the one in struct upload_pack_data).
(3) Before deepen() computes the list of reachable shallows, it first
needs to mark all "our" refs as OUR_REF. v2 currently does not do
this, because unlike v0, it is not needed otherwise.

Fix all this and include a test demonstrating that it works now. For
(2), the static variable deepen_relative is also eliminated, removing a
source of confusion.

Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

fetch-pack: do not take shallow lock unnecessarilyJonathan Tan Thu, 10 Jan 2019 19:36:45 +0000 (11:36 -0800)

fetch-pack: do not take shallow lock unnecessarily

When fetching using protocol v2, the remote may send a "shallow-info"
section if the client is shallow. If so, Git as the client currently
takes the shallow file lock, even if the "shallow-info" section is
empty.

This is not a problem except that Git does not support taking the
shallow file lock after modifying the shallow file, because
is_repository_shallow() stores information that is never cleared. And
this take-after-modify occurs when Git does a tag-following fetch from a
shallow repository on a transport that does not support tag following
(since in this case, 2 fetches are performed).

To solve this issue, take the shallow file lock (and perform all other
shallow processing) only if the "shallow-info" section is non-empty;
otherwise, behave as if it were empty.

A full solution (probably, ensuring that any action of committing
shallow file locks also includes clearing the information stored by
is_repository_shallow()) would solve the issue without need for this
patch, but this patch is independently useful (as an optimization to
prevent writing a file in an unnecessary case), hence why I wrote it. I
have included a NEEDSWORK outlining the full solution.

Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

fetch-pack: support protocol version 2Jonathan Tan Mon, 17 Dec 2018 22:40:54 +0000 (23:40 +0100)

fetch-pack: support protocol version 2

When the scaffolding for protocol version 2 was initially added in
8f6982b4e1 ("protocol: introduce enum protocol_version value
protocol_v2", 2018-03-14). As seen in:

git log -p -G'support for protocol v2 not implemented yet' --full-diff --reverse v2.17.0..v2.20.0

Many of those scaffolding "die" placeholders were removed, but we
hadn't gotten around to fetch-pack yet.

The test here for "fetch refs from cmdline" is very minimal. There's
much better coverage when running the entire test suite under the WIP
GIT_TEST_PROTOCOL_VERSION=2 mode[1], we should ideally have better
coverage without needing to invoke a special test mode.

1. https://public-inbox.org/git/20181213155817.27666-1-avarab@gmail.com/

Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

upload-pack: support hidden refs with protocol v2Jeff King Tue, 18 Dec 2018 12:47:50 +0000 (07:47 -0500)

upload-pack: support hidden refs with protocol v2

In the v2 protocol, upload-pack's advertisement has been moved to the
"ls-refs" command. That command does not respect hidden-ref config (like
transfer.hiderefs) at all, and advertises everything.

While there are some features that are not supported in v2 (e.g., v2
always allows fetching any sha1 without respect to advertisements), the
lack of this feature is not documented and is likely just a bug. Let's
make it work, as otherwise upgrading a server to a v2-capable git will
start exposing these refs that the repository admin has asked to remain
hidden.

Note that we assume we're operating on behalf of a fetch here, since
that's the only thing implemented in v2 at this point. See the in-code
comment. We'll have to figure out how this works when the v2 push
protocol is designed (both here in ls-refs, but also rejecting updates
to hidden refs).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --color-moved-ws: handle blank linesPhillip Wood Fri, 23 Nov 2018 11:16:58 +0000 (11:16 +0000)

diff --color-moved-ws: handle blank lines

When using --color-moved-ws=allow-indentation-change allow lines with
the same indentation change to be grouped across blank lines. For now
this only works if the blank lines have been moved as well, not for
blocks that have just had their indentation changed.

This completes the changes to the implementation of
--color-moved=allow-indentation-change. Running

git diff --color-moved=allow-indentation-change v2.18.0 v2.19.0

now takes 5.0s. This is a saving of 41% from 8.5s for the optimized
version of the previous implementation and 66% from the original which
took 14.6s.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --color-moved-ws: modify allow-indentation-changePhillip Wood Fri, 23 Nov 2018 11:16:57 +0000 (11:16 +0000)

diff --color-moved-ws: modify allow-indentation-change

Currently diff --color-moved-ws=allow-indentation-change does not
support indentation that contains a mix of tabs and spaces. For
example in commit 546f70f377 ("convert.h: drop 'extern' from function
declaration", 2018-06-30) the function parameters in the following
lines are not colored as moved [1].

-extern int stream_filter(struct stream_filter *,
- const char *input, size_t *isize_p,
- char *output, size_t *osize_p);
+int stream_filter(struct stream_filter *,
+ const char *input, size_t *isize_p,
+ char *output, size_t *osize_p);

This commit changes the way the indentation is handled to track the
visual size of the indentation rather than the characters in the
indentation. This has the benefit that any whitespace errors do not
interfer with the move detection (the whitespace errors will still be
highlighted according to --ws-error-highlight). During the discussion
of this feature there were concerns about the correct detection of
indentation for python. However those concerns apply whether or not
we're detecting moved lines so no attempt is made to determine if the
indentation is 'pythonic'.

[1] Note that before the commit to fix the erroneous coloring of moved
lines each line was colored as a different block, since that commit
they are uncolored.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --color-moved-ws: optimize allow-indentation-changePhillip Wood Fri, 23 Nov 2018 11:16:56 +0000 (11:16 +0000)

diff --color-moved-ws: optimize allow-indentation-change

When running

git diff --color-moved-ws=allow-indentation-change v2.18.0 v2.19.0

cmp_in_block_with_wsd() is called 694908327 times. Of those 42.7%
return after comparing a and b. By comparing the lengths first we can
return early in all but 0.03% of those cases without dereferencing the
string pointers. The comparison between a and c fails in 6.8% of
calls, by comparing the lengths first we reject all the failing calls
without dereferencing the string pointers.

This reduces the time to run the command above by by 42% from 14.6s to
8.5s. This is still much slower than the normal --color-moved which
takes ~0.6-0.7s to run but is a significant improvement.

The next commits will replace the current implementation with one that
works with mixed tabs and spaces in the indentation. I think it is
worth optimizing the current implementation first to enable a fair
comparison between the two implementations.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --color-moved=zebra: be stricter with color altern... Phillip Wood Fri, 23 Nov 2018 11:16:55 +0000 (11:16 +0000)

diff --color-moved=zebra: be stricter with color alternation

Currently when using --color-moved=zebra the color of moved blocks
depends on the number of lines separating them. This means that adding
an odd number of unmoved lines between blocks that are already separated
by one or more unmoved lines will change the color of subsequent moved
blocks. This does not make much sense as the blocks were already
separated by unmoved lines and causes problems when adding lines to test
cases.

Fix this by only using the alternate colors for adjacent moved blocks.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --color-moved-ws: fix false positivesPhillip Wood Fri, 23 Nov 2018 11:16:54 +0000 (11:16 +0000)

diff --color-moved-ws: fix false positives

'diff --color-moved-ws=allow-indentation-change' can color lines as
moved when they are in fact different. For example in commit
1a07e59c3e ("Update messages in preparation for i18n", 2018-07-21) the
lines

- die (_("must end with a color"));
+ die(_("must end with a color"));

are colored as moved even though they are different.

This is because if there is a fuzzy match for the first line of
a potential moved block the line is marked as moved before the
potential match is checked to see if it actually matches. The fix is
to delay marking the line as moved until after we have checked that
there really is at least one matching potential moved block.

Note that the test modified in the last commit still fails because
adding an unmoved line between two moved blocks that are already
separated by unmoved lines changes the color of the block following the
addition. This should not be the case and will be fixed in the next
commit.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --color-moved-ws: demonstrate false positivesPhillip Wood Fri, 23 Nov 2018 11:16:53 +0000 (11:16 +0000)

diff --color-moved-ws: demonstrate false positives

'diff --color-moved-ws=allow-indentation-change' can highlight lines
that have internal whitespace changes rather than indentation
changes. For example in commit 1a07e59c3e ("Update messages in
preparation for i18n", 2018-07-21) the lines

- die (_("must end with a color"));
+ die(_("must end with a color"));

are highlighted as moved when they should not be. Modify an existing
test to show the problem that will be fixed in the next commit.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff: allow --no-color-moved-wsPhillip Wood Fri, 23 Nov 2018 11:16:52 +0000 (11:16 +0000)

diff: allow --no-color-moved-ws

Allow --no-color-moved-ws and --color-moved-ws=no to cancel any previous
--color-moved-ws option.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Use "whitespace" consistentlyPhillip Wood Fri, 23 Nov 2018 11:16:51 +0000 (11:16 +0000)

Use "whitespace" consistently

Most of the messages and documentation use 'whitespace' rather than
'white space' or 'white spaces' convert to latter two to the former for
consistency.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff: document --no-color-movedPhillip Wood Fri, 23 Nov 2018 11:16:50 +0000 (11:16 +0000)

diff: document --no-color-moved

Add documentation for --no-color-moved.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-show-ref.txt: fix order of flagsElijah Newren Wed, 9 Jan 2019 19:58:47 +0000 (11:58 -0800)

git-show-ref.txt: fix order of flags

When the explanatory text uses the term "respectively", the order of
flags is important.

Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

ref-filter: give uintmax_t to format with %PRIuMAXJunio C Hamano Thu, 10 Jan 2019 18:15:49 +0000 (10:15 -0800)

ref-filter: give uintmax_t to format with %PRIuMAX

As long as we are casting to a wider type, we should cast to the one
with the correct signed-ness.

Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-gc.txt: fix typo about gc.writeCommitGraphDerrick Stolee Tue, 8 Jan 2019 16:52:20 +0000 (08:52 -0800)

git-gc.txt: fix typo about gc.writeCommitGraph

Reported-by: Stefan Haller <stefan@haller-berlin.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

object-store: retire odb_load_loose_cache()René Scharfe Mon, 7 Jan 2019 17:29:16 +0000 (18:29 +0100)

object-store: retire odb_load_loose_cache()

Inline odb_load_loose_cache() into its only remaining caller,
odb_loose_cache(). The latter offers a nicer interface for loading the
cache, as it doesn't require callers to deal with fanout directory
numbers directly.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

object-store: use one oid_array per subdirectory for... René Scharfe Sun, 6 Jan 2019 16:45:52 +0000 (17:45 +0100)

object-store: use one oid_array per subdirectory for loose cache

The loose objects cache is filled one subdirectory at a time as needed.
It is stored in an oid_array, which has to be resorted after each add
operation. So when querying a wide range of objects, the partially
filled array needs to be resorted up to 255 times, which takes over 100
times longer than sorting once.

Use one oid_array for each subdirectory. This ensures that entries have
to only be sorted a single time. It also avoids eight binary search
steps for each cache lookup as a small bonus.

The cache is used for collision checks for the log placeholders %h, %t
and %p, and we can see the change speeding them up in a repository with
ca. 100 objects per subdirectory:

$ git count-objects
26733 objects, 68808 kilobytes

Test HEAD^ HEAD
--------------------------------------------------------------------
4205.1: log with %H 0.51(0.47+0.04) 0.51(0.49+0.02) +0.0%
4205.2: log with %h 0.84(0.82+0.02) 0.60(0.57+0.03) -28.6%
4205.3: log with %T 0.53(0.49+0.04) 0.52(0.48+0.03) -1.9%
4205.4: log with %t 0.84(0.80+0.04) 0.60(0.59+0.01) -28.6%
4205.5: log with %P 0.52(0.48+0.03) 0.51(0.50+0.01) -1.9%
4205.6: log with %p 0.85(0.78+0.06) 0.61(0.56+0.05) -28.2%
4205.7: log with %h-%h-%h 0.96(0.92+0.03) 0.69(0.64+0.04) -28.1%

Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

object-store: factor out odb_clear_loose_cache()René Scharfe Sun, 6 Jan 2019 16:45:39 +0000 (17:45 +0100)

object-store: factor out odb_clear_loose_cache()

Add and use a function for emptying the loose object cache, so callers
don't have to know any of its implementation details.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

object-store: factor out odb_loose_cache()René Scharfe Sun, 6 Jan 2019 16:45:30 +0000 (17:45 +0100)

object-store: factor out odb_loose_cache()

Add and use a function for loading the entries of a loose object
subdirectory for a given object ID. It frees callers from deriving the
fanout key; they can use the returned oid_array reference for lookups or
forward range scans.

Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-quiltimport: add --keep-non-patch optionLaura Abbott Wed, 12 Dec 2018 22:32:27 +0000 (14:32 -0800)

git-quiltimport: add --keep-non-patch option

git-am has the --keep-non-patch option to pass -b to
git-mailinfo for keeping subject prefixes intact. Allow
this option to be used with quiltimport as well.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-p4: fix problem when p4 login is not necessaryPeter Osterlund Mon, 7 Jan 2019 20:51:38 +0000 (21:51 +0100)

git-p4: fix problem when p4 login is not necessary

In a perforce setup where login is not required, communication fails
because p4_check_access does not understand the response from the p4
client. Fixed by detecting and ignoring the "info" response.

Signed-off-by: Peter Osterlund <peterosterlund2@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Documentation/Makefile add optional targets for l10nJean-Noel Avila Mon, 7 Jan 2019 19:21:12 +0000 (20:21 +0100)

Documentation/Makefile add optional targets for l10n

The standard doc lists can be filtered to allow using the
compilation rules with translated manpages where all the pages of
the original version may not be present.

The install variable are reused in the secondary repo so that the
configured paths can be used for translated manpages too.

Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-multimail: update to release 1.5.0Matthieu Moy Mon, 7 Jan 2019 17:48:38 +0000 (18:48 +0100)

git-multimail: update to release 1.5.0

Changes are described in CHANGES.

Contributions-by: Matthieu Moy <git@matthieu-moy.fr>
Contributions-by: William Stewart <william.stewart@booking.com>
Contributions-by: Ville Skyttä <ville.skytta@iki.fi>
Contributions-by: Dirk Olmes <dirk.olmes@codedo.de>
Contributions-by: Björn Kautler <Bjoern@Kautler.net>
Contributions-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Contributions-by: Gareth Pye <garethp@gpsatsys.com.au>
Contributions-by: David Lazar <lazard@csail.mit.edu>
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

rebase: implement --merge via the interactive machineryElijah Newren Tue, 11 Dec 2018 16:11:39 +0000 (08:11 -0800)

rebase: implement --merge via the interactive machinery

As part of an ongoing effort to make rebase have more uniform behavior,
modify the merge backend to behave like the interactive one, by
re-implementing it on top of the latter.

Interactive rebases are implemented in terms of cherry-pick rather than
the merge-recursive builtin, but cherry-pick also calls into the
recursive merge machinery by default and can accept special merge
strategies and/or special strategy options. As such, there really is
not any need for having both git-rebase--merge and
git-rebase--interactive anymore. Delete git-rebase--merge.sh and
instead implement it in builtin/rebase.c.

This results in a few deliberate but small user-visible changes:
* The progress output is modified (see t3406 and t3420 for examples)
* A few known test failures are now fixed (see t3421)
* bash-prompt during a rebase --merge is now REBASE-i instead of
REBASE-m. Reason: The prompt is a reflection of the backend in use;
this allows users to report an issue to the git mailing list with
the appropriate backend information, and allows advanced users to
know where to search for relevant control files. (see t9903)

testcase modification notes:
t3406: --interactive and --merge had slightly different progress output
while running; adjust a test to match the new expectation
t3420: these test precise output while running, but rebase--am,
rebase--merge, and rebase--interactive all were built on very
different commands (am, merge-recursive, cherry-pick), so the
tests expected different output for each type. Now we expect
--merge and --interactive to have the same output.
t3421: --interactive fixes some bugs in --merge! Wahoo!
t9903: --merge uses the interactive backend so the prompt expected is
now REBASE-i.

Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

worktree: allow to (re)move worktrees with uninitialize... Nguyễn Thái Ngọc Duy Sat, 5 Jan 2019 05:08:40 +0000 (12:08 +0700)

worktree: allow to (re)move worktrees with uninitialized submodules

Uninitialized submodules have nothing valueable for us to be worried
about. They are just SHA-1. Let "worktree remove" and "worktree move"
continue in this case so that people can still use multiple worktrees
on repos with optional submodules that are never populated, like
sha1collisiondetection in git.git when checked out by doc-diff script.

Note that for "worktree remove", it is possible that a user
initializes a submodule (*), makes some commits (but not push), then
deinitializes it. At that point, the submodule is unpopulated, but the
precious new commits are still in

$GIT_COMMON_DIR/worktrees/<worktree>/modules/<submodule>

directory and we should not allow removing the worktree or we lose
those commits forever. The new directory check is added to prevent
this.

(*) yes they are screwed anyway by doing this since "git submodule"
would add submodule.* in $GIT_COMMON_DIR/config, which is shared
across multiple worktrees. But it does not mean we let them be
screwed even more.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

test-lib: add the '--stress' option to run a test repea... SZEDER Gábor Sat, 5 Jan 2019 01:08:59 +0000 (02:08 +0100)

test-lib: add the '--stress' option to run a test repeatedly under load

Unfortunately, we have a few flaky tests, whose failures tend to be
hard to reproduce. We've found that the best we can do to reproduce
such a failure is to run the test script repeatedly while the machine
is under load, and wait in the hope that the load creates enough
variance in the timing of the test's commands that a failure is
evenually triggered. I have a command to do that, and I noticed that
two other contributors have rolled their own scripts to do the same,
all choosing slightly different approaches.

To help reproduce failures in flaky tests, introduce the '--stress'
option to run a test script repeatedly in multiple parallel jobs until
one of them fails, thereby using the test script itself to increase
the load on the machine.

The number of parallel jobs is determined by, in order of precedence:
the number specified as '--stress=<N>', or the value of the
GIT_TEST_STRESS_LOAD environment variable, or twice the number of
available processors (as reported by the 'getconf' utility), or 8.

Make '--stress' imply '--verbose -x --immediate' to get the most
information about rare failures; there is really no point in spending
all the extra effort to reproduce such a failure, and then not know
which command failed and why.

To prevent the several parallel invocations of the same test from
interfering with each other:

- Include the parallel job's number in the name of the trash
directory and the various output files under 't/test-results/' as
a '.stress-<Nr>' suffix.

- Add the parallel job's number to the port number specified by the
user or to the test number, so even tests involving daemons
listening on a TCP socket can be stressed.

- Redirect each parallel test run's verbose output to
't/test-results/$TEST_NAME.stress-<nr>.out', because dumping the
output of several parallel running tests to the terminal would
create a big ugly mess.

For convenience, print the output of the failed test job at the end,
and rename its trash directory to end with the '.stress-failed'
suffix, so it's easy to find in a predictable path (OTOH, all absolute
paths recorded in the trash directory become invalid; we'll see
whether this causes any issues in practice). If, in an unlikely case,
more than one jobs were to fail nearly at the same time, then print
the output of all failed jobs, and rename the trash directory of only
the last one (i.e. with the highest job number), as it is the trash
directory of the test whose output will be at the bottom of the user's
terminal.

Based on Jeff King's 'stress' script.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

test-lib-functions: introduce the 'test_set_port' helpe... SZEDER Gábor Sat, 5 Jan 2019 01:08:58 +0000 (02:08 +0100)

test-lib-functions: introduce the 'test_set_port' helper function

Several test scripts run daemons like 'git-daemon' or Apache, and
communicate with them through TCP sockets. To have unique ports where
these daemons are accessible, the ports are usually the number of the
corresponding test scripts, unless the user overrides them via
environment variables, and thus all those tests and test libs contain
more or less the same bit of one-liner boilerplate code to find out
the port. The last patch in this series will make this a bit more
complicated.

Factor out finding the port for a daemon into the common helper
function 'test_set_port' to avoid repeating ourselves.

Take special care of test scripts with "low" numbers:

- Test numbers below 1024 would result in a port that's only usable
as root, so set their port to '10000 + test-nr' to make sure it
doesn't interfere with other tests in the test suite. This makes
the hardcoded port number in 't0410-partial-clone.sh' unnecessary,
remove it.

- The shell's arithmetic evaluation interprets numbers with leading
zeros as octal values, which means that test number below 1000 and
containing the digits 8 or 9 will trigger an error. Remove all
leading zeros from the test numbers to prevent this.

Note that the 'git p4' tests are unlike the other tests involving
daemons in that:

- 'lib-git-p4.sh' doesn't use the test's number for unique port as
is, but does a bit of additional arithmetic on top [1].

- The port is not overridable via an environment variable.

With this patch even 'git p4' tests will use the test's number as
default port, and it will be overridable via the P4DPORT environment
variable.

[1] Commit fc00233071 (git-p4 tests: refactor and cleanup, 2011-08-22)
introduced that "unusual" unique port computation without
explaining why it was necessary (as opposed to simply using the
test number as is). It seems to be just unnecessary complication,
and in any case that commit came way before the "test nr as unique
port" got "standardized" for other daemons in commits c44132fcf3
(tests: auto-set git-daemon port, 2014-02-10), 3bb486e439 (tests:
auto-set LIB_HTTPD_PORT from test name, 2014-02-10), and
bf9d7df950 (t/lib-git-svn.sh: improve svnserve tests with parallel
make test, 2017-12-01).

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

test-lib: set $TRASH_DIRECTORY earlierSZEDER Gábor Sat, 5 Jan 2019 01:08:57 +0000 (02:08 +0100)

test-lib: set $TRASH_DIRECTORY earlier

A later patch in this series will need to know the path to the trash
directory early in 'test-lib.sh', but $TRASH_DIRECTORY is set much
later.

Set $TRASH_DIRECTORY earlier, where the other test-specific path
variables are set.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

test-lib: consolidate naming of test-results pathsSZEDER Gábor Sat, 5 Jan 2019 01:08:56 +0000 (02:08 +0100)

test-lib: consolidate naming of test-results paths

There are two places where we strip off any leading path components
and the '.sh' suffix from the test script's pathname, and there are
four places where we construct the name of the 't/test-results'
directory or the name of various test-specific files in there. The
last patch in this series will add even more.

Factor these out into helper variables to avoid repeating ourselves.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

test-lib: parse command line options earlierSZEDER Gábor Sat, 5 Jan 2019 01:08:55 +0000 (02:08 +0100)

test-lib: parse command line options earlier

'test-lib.sh' looks for the presence of certain options like '--tee'
and '--verbose-log', so it can execute the test script again to save
its standard output and error. It looks for '--valgrind' as well, to
set up some Valgrind-specific stuff. These all happen before the
actual option parsing loop, and the conditions looking for these
options look a bit odd, too. They are not completely correct, either,
because in a bogus invocation like './t1234-foo.sh -r --tee' they
recognize '--tee', although it should be handled as the required
argument of the '-r' option. This patch series will add two more
options to look out for early, and, in addition, will have to extract
these options' stuck arguments (i.e. '--opt=arg') as well.

So let's move the option parsing loop and the couple of related
conditions following it earlier in 'test-lib.sh', before the place
where the test script is executed again for '--tee' and its friends.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

test-lib: parse options in a for loop to keep $@ intactSZEDER Gábor Sat, 5 Jan 2019 01:08:54 +0000 (02:08 +0100)

test-lib: parse options in a for loop to keep $@ intact

'test-lib.sh' looks for the presence of certain options like '--tee'
and '--verbose-log', so it can execute the test script again to save
its standard output and error, and to do so it needs the original
command line options the test was invoked with.

The next patch is about to move the option parsing loop earlier in
'test-lib.sh', but it is implemented using 'shift' in a while loop,
effecively destroying "$@" by the end of the option parsing. Not
good.

As a preparatory step, turn that option parsing loop into a 'for opt
in "$@"' loop to preserve "$@" intact while iterating over the
options, and taking extra care to handle the '-r' option's required
argument (or the lack thereof).

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

test-lib: extract Bash version check for '-x' tracingSZEDER Gábor Sat, 5 Jan 2019 01:08:53 +0000 (02:08 +0100)

test-lib: extract Bash version check for '-x' tracing

One of our test scripts, 't1510-repo-setup.sh' [1], still can't be
reliably run with '-x' tracing enabled, unless it's executed with a
Bash version supporting BASH_XTRACEFD (since v4.1). We have a lengthy
condition to check the version of the shell running the test script,
and disable tracing if it's not executed with a suitable Bash version
[2].

Move this check out from the option parsing loop, so other options can
imply '-x' by setting 'trace=t', without missing this Bash version
check.

[1] 5827506928 (t1510-repo-setup: mark as untraceable with '-x',
2018-02-24)
[2] 5fc98e79fc (t: add means to disable '-x' tracing for individual
test scripts, 2018-02-24)

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

config.mak.dev: add -Wall, primarily for -Wformat,... Thomas Gummerer Fri, 12 Oct 2018 18:40:37 +0000 (19:40 +0100)

config.mak.dev: add -Wall, primarily for -Wformat, to help autoconf users

801fa63a90 ("config.mak.dev: add -Wformat-security", 2018-09-08)
added the "-Wformat-security" to the flags set in config.mak.dev.
In the gcc man page this is documented as:

If -Wformat is specified, also warn about uses of format
functions that represent possible security problems. [...]

The commit did however not add the "-Wformat" flag, but instead
relied on the fact that "-Wall" is set in the Makefile by default
and that "-Wformat" is part of "-Wall".

Unfortunately, those who use config.mak.autogen generated with the
autoconf to configure toolchain do *not* get "-Wall" in their CFLAGS
and the added -Wformat-security had no effect. Worse yet, newer
versions of gcc (gcc 8.2.1 in this particular case) warn about the
lack of "-Wformat" and thus compilation fails only with this option
set.

We could fix it by adding "-Wformat", but in general we do want all
checks included in "-Wall", so let's add it to config.mak.dev to
cover more cases.

Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

sha1-file: close fd of empty file in map_sha1_file_1()René Scharfe Mon, 7 Jan 2019 16:48:02 +0000 (17:48 +0100)

sha1-file: close fd of empty file in map_sha1_file_1()

map_sha1_file_1() checks if the file it is about to mmap() is empty and
errors out in that case and explains the situation in an error message.
It leaks the private handle to that empty file, though.

Have the function clean up after itself and close the file descriptor
before exiting early.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t3506: validate '-m 1 -ff' is now accepted for non... Sergey Organov Fri, 14 Dec 2018 04:53:51 +0000 (07:53 +0300)

t3506: validate '-m 1 -ff' is now accepted for non-merge commits

Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t3502: validate '-m 1' argument is now accepted for... Sergey Organov Fri, 14 Dec 2018 04:53:51 +0000 (07:53 +0300)

t3502: validate '-m 1' argument is now accepted for non-merge commits

Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Revert "t/lib-git-daemon: record daemon log"Thomas Gummerer Sun, 6 Jan 2019 17:53:10 +0000 (17:53 +0000)

Revert "t/lib-git-daemon: record daemon log"

This reverts commit 314a73d658 (t/lib-git-daemon: record daemon log,
2018-01-25), which let tests use the output of git-daemon.

The previous commit removed the last user of deamon.log in the tests,
there's no good way to make checking for output in the log
race-proof. Revert this commit as well, to make sure others are not
tempted to use daemon.log in tests in the future, which would lead to
racy tests.

The original commit had one change that still makes sense, namely
switching read/echo for "read -r" and "printf", which relays the data
more faithfully. Don't revert that piece here, as it is still a
useful change.

Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

First batch after 2.20.1Junio C Hamano Fri, 4 Jan 2019 21:39:39 +0000 (13:39 -0800)

First batch after 2.20.1

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Merge branch 'mk/http-backend-kill-children-before... Junio C Hamano Fri, 4 Jan 2019 21:33:34 +0000 (13:33 -0800)

Merge branch 'mk/http-backend-kill-children-before-exit'

The http-backend CGI process did not correctly clean up the child
processes it spawns to run upload-pack etc. when it dies itself,
which has been corrected.

* mk/http-backend-kill-children-before-exit:
http-backend: enable cleaning up forked upload/receive-pack on exit

Merge branch 'sd/stash-wo-user-name'Junio C Hamano Fri, 4 Jan 2019 21:33:34 +0000 (13:33 -0800)

Merge branch 'sd/stash-wo-user-name'

A properly configured username/email is required under
user.useConfigOnly in order to create commits; now "git stash"
(even though it creates commit objects to represent stash entries)
command is exempt from the requirement.

* sd/stash-wo-user-name:
stash: tolerate missing user identity

Merge branch 'sg/clone-initial-fetch-configuration'Junio C Hamano Fri, 4 Jan 2019 21:33:34 +0000 (13:33 -0800)

Merge branch 'sg/clone-initial-fetch-configuration'

Refspecs configured with "git -c var=val clone" did not propagate
to the resulting repository, which has been corrected.

* sg/clone-initial-fetch-configuration:
Documentation/clone: document ignored configuration variables
clone: respect additional configured fetch refspecs during initial fetch
clone: use a more appropriate variable name for the default refspec

Merge branch 'nd/checkout-dwim-fix'Junio C Hamano Fri, 4 Jan 2019 21:33:34 +0000 (13:33 -0800)

Merge branch 'nd/checkout-dwim-fix'

"git checkout frotz" (without any double-dash) avoids ambiguity by
making sure 'frotz' cannot be interpreted as a revision and as a
path at the same time. This safety has been updated to check also
a unique remote-tracking branch 'frotz' in a remote, when dwimming
to create a local branch 'frotz' out of a remote-tracking branch
'frotz' from a remote.

* nd/checkout-dwim-fix:
checkout: disambiguate dwim tracking branches and local files

Merge branch 'ab/push-dwim-dst'Junio C Hamano Fri, 4 Jan 2019 21:33:33 +0000 (13:33 -0800)

Merge branch 'ab/push-dwim-dst'

"git push $there $src:$dst" rejects when $dst is not a fully
qualified refname and not clear what the end user meant. The
codepath has been taught to give a clearer error message, and also
guess where the push should go by taking the type of the pushed
object into account (e.g. a tag object would want to go under
refs/tags/).

* ab/push-dwim-dst:
push doc: document the DWYM behavior pushing to unqualified <dst>
push: test that <src> doesn't DWYM if <dst> is unqualified
push: add an advice on unqualified <dst> push
push: move unqualified refname error into a function
push: improve the error shown on unqualified <dst> push
i18n: remote.c: mark error(...) messages for translation
remote.c: add braces in anticipation of a follow-up change

Merge branch 'en/fast-export-import'Junio C Hamano Fri, 4 Jan 2019 21:33:33 +0000 (13:33 -0800)

Merge branch 'en/fast-export-import'

Small fixes and features for fast-export and fast-import, mostly on
the fast-export side.

* en/fast-export-import:
fast-export: add a --show-original-ids option to show original names
fast-import: remove unmaintained duplicate documentation
fast-export: add --reference-excluded-parents option
fast-export: ensure we export requested refs
fast-export: when using paths, avoid corrupt stream with non-existent mark
fast-export: move commit rewriting logic into a function for reuse
fast-export: avoid dying when filtering by paths and old tags exist
fast-export: use value from correct enum
git-fast-export.txt: clarify misleading documentation about rev-list args
git-fast-import.txt: fix documentation for --quiet option
fast-export: convert sha1 to oid

Merge branch 'nd/the-index'Junio C Hamano Fri, 4 Jan 2019 21:33:33 +0000 (13:33 -0800)

Merge branch 'nd/the-index'

More codepaths become aware of working with in-core repository
instance other than the default "the_repository".

* nd/the-index: (22 commits)
rebase-interactive.c: remove the_repository references
rerere.c: remove the_repository references
pack-*.c: remove the_repository references
pack-check.c: remove the_repository references
notes-cache.c: remove the_repository references
line-log.c: remove the_repository reference
diff-lib.c: remove the_repository references
delta-islands.c: remove the_repository references
cache-tree.c: remove the_repository references
bundle.c: remove the_repository references
branch.c: remove the_repository reference
bisect.c: remove the_repository reference
blame.c: remove implicit dependency the_repository
sequencer.c: remove implicit dependency on the_repository
sequencer.c: remove implicit dependency on the_index
transport.c: remove implicit dependency on the_index
notes-merge.c: remove implicit dependency the_repository
notes-merge.c: remove implicit dependency on the_index
list-objects.c: reduce the_repository references
list-objects-filter.c: remove implicit dependency on the_index
...

Merge branch 'jk/loose-object-cache'Junio C Hamano Fri, 4 Jan 2019 21:33:32 +0000 (13:33 -0800)

Merge branch 'jk/loose-object-cache'

Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.

* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs

Merge branch 'fc/http-version'Junio C Hamano Fri, 4 Jan 2019 21:33:32 +0000 (13:33 -0800)

Merge branch 'fc/http-version'

The "http.version" configuration variable can be used with recent
enough cURL library to force the version of HTTP used to talk when
fetching and pushing.

* fc/http-version:
http: add support selecting http version

Merge branch 'en/merge-path-collision'Junio C Hamano Fri, 4 Jan 2019 21:33:32 +0000 (13:33 -0800)

Merge branch 'en/merge-path-collision'

Updates for corner cases in merge-recursive.

* en/merge-path-collision:
t6036: avoid non-portable "cp -a"
merge-recursive: combine error handling
t6036, t6043: increase code coverage for file collision handling
merge-recursive: improve rename/rename(1to2)/add[/add] handling
merge-recursive: use handle_file_collision for add/add conflicts
merge-recursive: improve handling for rename/rename(2to1) conflicts
merge-recursive: fix rename/add conflict handling
merge-recursive: new function for better colliding conflict resolutions
merge-recursive: increase marker length with depth of recursion
t6036, t6042: testcases for rename collision of already conflicting files
t6042: add tests for consistency in file collision conflict handling

Merge branch 'nd/i18n'Junio C Hamano Fri, 4 Jan 2019 21:33:31 +0000 (13:33 -0800)

Merge branch 'nd/i18n'

More _("i18n") markings.

* nd/i18n:
fsck: mark strings for translation
fsck: reduce word legos to help i18n
parse-options.c: mark more strings for translation
parse-options.c: turn some die() to BUG()
parse-options: replace opterror() with optname()
repack: mark more strings for translation
remote.c: mark messages for translation
remote.c: turn some error() or die() to BUG()
reflog: mark strings for translation
read-cache.c: add missing colon separators
read-cache.c: mark more strings for translation
read-cache.c: turn die("internal error") to BUG()
attr.c: mark more string for translation
archive.c: mark more strings for translation
alias.c: mark split_cmdline_strerror() strings for translation
git.c: mark more strings for translation

test-lib: translate SIGTERM and SIGHUP to an exitSZEDER Gábor Sun, 30 Dec 2018 19:16:22 +0000 (20:16 +0100)

test-lib: translate SIGTERM and SIGHUP to an exit

Right now if a test script receives SIGTERM or SIGHUP (e.g., because a
test was hanging and the user 'kill'-ed it or simply closed the
terminal window the test was running in), the shell exits immediately.
This can be annoying if the test script did any global setup, like
starting apache or git-daemon, as it will not have an opportunity to
clean up after itself. A subsequent run of the test won't be able to
start its own daemon, and will either fail or skip the tests.

Instead, let's trap SIGTERM and SIGHUP as well to make sure we do a
clean shutdown, and just chain it to a normal exit (which will trigger
any cleanup).

This patch follows suit of da706545f7 (t: translate SIGINT to an exit,
2015-03-13), and even stole its commit message as well.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

compat/regex/regcomp.c: define intptr_t and uintptr_t... Randall S. Becker Thu, 3 Jan 2019 21:03:51 +0000 (16:03 -0500)

compat/regex/regcomp.c: define intptr_t and uintptr_t on NonStop

The system definition header files on HPE NonStop do not define
intptr_t and uintptr_t as do other platforms. These typedefs
are added specifically wrapped in a __TANDEM ifdef.

Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-compat-util.h: add FLOSS headers for HPE NonStopRandall S. Becker Thu, 3 Jan 2019 21:03:50 +0000 (16:03 -0500)

git-compat-util.h: add FLOSS headers for HPE NonStop

The HPE NonStop (a.k.a. __TANDEM) platform cannot build git without
using the FLOSS package supplied by HPE. The convenient location
for including the relevant headers is in this file.

The NSIG define is also not defined on __TANDEM, so we define it
here as 100 if it is not defined only for __TANDEM builds.

Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

config.mak.uname: support for modern HPE NonStop config.Randall S. Becker Thu, 3 Jan 2019 21:03:49 +0000 (16:03 -0500)

config.mak.uname: support for modern HPE NonStop config.

A number of configuration options are not automatically detected by
configure mechanisms, including the location of Perl and Python.

There was a problem at a specific set of operating system versions
that caused getopt to have compile errors. Account for this by
providing emulation defines for those versions.

Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

transport-helper: drop read/write errno checksJeff King Thu, 11 Jan 2018 06:31:10 +0000 (01:31 -0500)

transport-helper: drop read/write errno checks

Since we use xread() and xwrite() here, EINTR, EAGAIN, and
EWOULDBLOCK retries are already handled for us, and we will
never see these errno values ourselves. We can drop these
conditions entirely, making the code easier to follow.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

transport-helper: use xread instead of readRandall S. Becker Thu, 3 Jan 2019 21:03:48 +0000 (16:03 -0500)

transport-helper: use xread instead of read

This fix was needed on HPE NonStop NSE and NSX where SSIZE_MAX is less than
BUFFERSIZE resulting in EINVAL. The call to read in transport-helper.c
was the only place outside of wrapper.c where it is used instead of xread.

Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

completion: fix typo in git-completion.bashChayoung You Wed, 26 Dec 2018 16:22:16 +0000 (01:22 +0900)

completion: fix typo in git-completion.bash

Signed-off-by: Chayoung You <yousbe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Merge branch 'sg/test-bash-version-fix'Junio C Hamano Thu, 3 Jan 2019 21:18:55 +0000 (13:18 -0800)

Merge branch 'sg/test-bash-version-fix'

* sg/test-bash-version-fix:
test-lib: check Bash version for '-x' without using shell arrays

test-lib: check Bash version for '-x' without using... SZEDER Gábor Thu, 3 Jan 2019 11:43:17 +0000 (12:43 +0100)

test-lib: check Bash version for '-x' without using shell arrays

One of our test scripts, 't1510-repo-setup.sh' [1], still can't be
reliably run with '-x' tracing enabled, unless it's executed with a
Bash version supporting BASH_XTRACEFD (since v4.1). We have a lengthy
condition to check the version of the shell running the test script,
and disable tracing if it's not executed with a suitable Bash version
[2].

This condition uses non-portable shell array accesses to easily get
Bash's major and minor version number. This didn't seem to be
problematic, because the simple commands expanding those array
accesses are only executed when the test script is actually run with
Bash. When run with Dash, the only shell I have at hand that doesn't
support shell arrays, there are no issues, as it apparently skips
right over the non-executed simple commands without noticing the
non-supported constructs.

Alas, it has been reported that NetBSD's /bin/sh does complain about
them:

./test-lib.sh: 327: Syntax error: Bad substitution

where line 327 contains the first ${BASH_VERSINFO[0]} array access.

To my understanding both shells are right and conform to POSIX,
because the standard allows both behaviors by stating the following
under '2.8.1 Consequences of Shell Errors' [3]:

"An expansion error is one that occurs when the shell expansions
define in wordexp are carried out (for example, "${x!y}", because
'!' is not a valid operator); an implementation may treat these as
syntax errors if it is able to detect them during tokenization,
rather than during expansion."

Avoid this issue with NetBSD's /bin/sh (and potentially with other,
less common shells) by hiding the shell array syntax behind 'eval'
that is only executed with Bash.

[1] 5827506928 (t1510-repo-setup: mark as untraceable with '-x',
2018-02-24)
[2] 5fc98e79fc (t: add means to disable '-x' tracing for individual
test scripts, 2018-02-24)
[3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_08_01

Reported-by: Max Kirillov <max@max630.net>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

completion: treat results of git ls-tree as file pathsChayoung You Tue, 1 Jan 2019 14:05:09 +0000 (23:05 +0900)

completion: treat results of git ls-tree as file paths

Let's say there are files named 'foo bar.txt', and 'abc def/test.txt' in
repository. When following commands trigger a completion:

git show HEAD:fo<Tab>
git show HEAD:ab<Tab>

The completion results in bash/zsh:

git show HEAD:foo bar.txt
git show HEAD:abc def/

Where the both of them have an unescaped space in paths, so they'll be
misread by git. All entries of git ls-tree either a filename or a
directory, so __gitcomp_file() is proper rather than __gitcomp_nl().

Note the commit f12785a3, which handles quoted paths properly. Like this
case, we should dequote $cur_ for ?*:* case. For example, let's say
there is untracked directory 'abc deg', then trigger a completion:

git show HEAD:abc\ de<Tab>
git show HEAD:'abc de<Tab>
git show HEAD:"abc de<Tab>

should uniquely complete 'abc def', but bash completes 'abc def' and
'abc deg' instead. In zsh, triggering a completion:

git show HEAD:abc\ def/<Tab>

should complete 'test.txt', but nothing comes. The both problems will be
resolved by dequoting paths.

__git_complete_revlist_file() passes arguments to __gitcomp_nl() where
the first one is a list something like:

abc def/Z
foo bar.txt Z

where Z is the mark of the EOL.

- The trailing space of blob in __git ls-tree | sed.
It makes the completion results become:

git show HEAD:foo\ bar.txt\ <CURSOR>

So git will try to find a file named 'foo bar.txt ' instead.

- The trailing slash of tree in __git ls-tree | sed.
It makes the completion results on zsh become:

git show HEAD:abc\ def/ <CURSOR>

So that the last space on command like should be removed on zsh to
complete filenames under 'abc def/'.

Signed-off-by: Chayoung You <yousbe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

zsh: complete unquoted paths with spaces correctlyChayoung You Tue, 1 Jan 2019 14:05:08 +0000 (23:05 +0900)

zsh: complete unquoted paths with spaces correctly

The following is the description of -Q flag of zsh compadd [1]:

This flag instructs the completion code not to quote any
metacharacters in the words when inserting them into the command
line.

Let's say there is a file named 'foo bar.txt' in repository, but it's
not yet added to the repository. Then the following command triggers a
completion:

git add fo<Tab>
git add 'fo<Tab>
git add "fo<Tab>

The completion results in bash:

git add foo\ bar.txt
git add 'foo bar.txt'
git add "foo bar.txt"

While them in zsh:

git add foo bar.txt
git add 'foo bar.txt'
git add "foo bar.txt"

The first one, where the pathname is not enclosed in quotes, should
escape the space with a backslash, just like bash completion does.
Otherwise, this leads git to think there are two files; foo, and
bar.txt.

The main cause of this behavior is __gitcomp_file_direct(). The both
implementions of bash and zsh are called with an argument 'foo bar.txt',
but only bash adds a backslash before a space on command line.

[1]: http://zsh.sourceforge.net/Doc/Release/Completion-Widgets.html

Signed-off-by: Chayoung You <yousbe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Simplify handling of setup_git_directory_gently() failu... Erin Dahlgren Thu, 27 Dec 2018 23:36:29 +0000 (15:36 -0800)

Simplify handling of setup_git_directory_gently() failure cases.

setup_git_directory_gently() expects two types of failures to
discover a git directory (e.g. .git/):

- GIT_DIR_HIT_CEILING: could not find a git directory in any
parent directories of the cwd.
- GIT_DIR_HIT_MOUNT_POINT: could not find a git directory in
any parent directories up to the mount point of the cwd.

Both cases are handled in a similar way, but there are misleading
and unimportant differences. In both cases, setup_git_directory_gently()
should:

- Die if we are not in a git repository. Otherwise:
- Set nongit_ok = 1, indicating that we are not in a git repository
but this is ok.
- Call strbuf_release() on any non-static struct strbufs that we
allocated.

Before this change are two misleading additional behaviors:

- GIT_DIR_HIT_CEILING: setup_nongit() changes to the cwd for no
apparent reason. We never had the chance to change directories
up to this point so chdir(current cwd) is pointless.
- GIT_DIR_HIT_MOUNT_POINT: strbuf_release() frees the buffer
of a static struct strbuf (cwd). This is unnecessary because the
struct is static so its buffer is always reachable. This is also
misleading because nowhere else in the function is this buffer
released.

This change eliminates these two misleading additional behaviors and
deletes setup_nogit() because the code is clearer without it. The
result is that we can see clearly that GIT_DIR_HIT_CEILING and
GIT_DIR_HIT_MOUNT_POINT lead to the same behavior (ignoring the
different help messages).

During review, this change was amended to additionally include:

- Neither GIT_DIR_HIT_CEILING nor GIT_DIR_HIT_MOUNT_POINT may
return early from setup_git_directory_gently() before the
GIT_PREFIX environment variable is reset. Change both cases to
break instead of return. See GIT_PREFIX below for more details.

- GIT_DIR_NONE: setup_git_directory_gently_1() never returns this
value, but if it ever did, setup_git_directory_gently() would
incorrectly record that it had found a repository. Explicitly
BUG on this case because it is underspecified.

- GIT_PREFIX: this environment variable must always match the
value of startup_info->prefix and the prefix returned from
setup_git_directory_gently(). Make how we handle this slightly
more repetitive but also more clear.

- setup_git_env() and repo_set_hash_algo(): Add comments showing
that only GIT_DIR_EXPLICIT, GIT_DIR_DISCOVERED, and GIT_DIR_BARE
will cause setup_git_directory_gently() to call these setup
functions. This was obvious (but partly incorrect) before this
change when GIT_DIR_HIT_MOUNT_POINT returned early from
setup_git_directory_gently().

Signed-off-by: Junio C Hamano <gitster@pobox.com>

commit-graph: writing missing parents is a BUGDerrick Stolee Wed, 19 Dec 2018 20:14:07 +0000 (12:14 -0800)

commit-graph: writing missing parents is a BUG

When writing a commit-graph, we write GRAPH_MISSING_PARENT if the
parent's object id does not appear in the list of commits to be
written into the commit-graph. This was done as the initial design
allowed commits to have missing parents, but the final version
requires the commit-graph to be closed under reachability. Thus,
this GRAPH_MISSING_PARENT value should never be written.

However, there are reasons why it could be written! These range
from a bug in the reachable-closure code to a memory error causing
the binary search into the list of object ids to fail. In either
case, we should fail fast and avoid writing the commit-graph file
with bad data.

Remove the GRAPH_MISSING_PARENT constant in favor of the constant
GRAPH_EDGE_LAST_MASK, which has the same value.

Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

rebase: run post-checkout hook on checkoutOrgad Shaneh Sat, 29 Dec 2018 21:37:59 +0000 (23:37 +0200)

rebase: run post-checkout hook on checkout

The scripted version of rebase used to run this hook on the initial
checkout. The transition to built-in introduced a regression.

Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

t5403: simplify by using a single repositoryOrgad Shaneh Sat, 29 Dec 2018 21:37:58 +0000 (23:37 +0200)

t5403: simplify by using a single repository

There is no strong reason to use separate clones to run
these tests; just use a single test repository prepared
with more modern test_commit shell helper function.

While at it, replace three "awk '{print $N}'" on the same
file with shell built-in "read" into three variables.

Revert d42ec126aa717d00549e387d5a95fd55683c2e2c which is a workaround for
Cygwin that is no longer needed.

Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

pack-protocol.txt: accept error packets in any contextMasaya Suzuki Sat, 29 Dec 2018 21:19:15 +0000 (13:19 -0800)

pack-protocol.txt: accept error packets in any context

In the Git pack protocol definition, an error packet may appear only in
a certain context. However, servers can face a runtime error (e.g. I/O
error) at an arbitrary timing. This patch changes the protocol to allow
an error packet to be sent instead of any packet.

Without this protocol spec change, when a server cannot process a
request, there's no way to tell that to a client. Since the server
cannot produce a valid response, it would be forced to cut a connection
without telling why. With this protocol spec change, the server can be
more gentle in this situation. An old client may see these error packets
as an unexpected packet, but this is not worse than having an unexpected
EOF.

Following this protocol spec change, the error packet handling code is
moved to pkt-line.c. Implementation wise, this implementation uses
pkt-line to communicate with a subprocess. Since this is not a part of
Git protocol, it's possible that a packet that is not supposed to be an
error packet is mistakenly parsed as an error packet. This error packet
handling is enabled only for the Git pack protocol parsing code
considering this.

Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Use packet_reader instead of packet_read_lineMasaya Suzuki Sat, 29 Dec 2018 21:19:14 +0000 (13:19 -0800)

Use packet_reader instead of packet_read_line

By using and sharing a packet_reader while handling a Git pack protocol
request, the same reader option is used throughout the code. This makes
it easy to set a reader option to the request parsing code.

Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

bisect--helper: `bisect_start` shell function partially... Pranit Bauva Wed, 2 Jan 2019 15:38:36 +0000 (07:38 -0800)

bisect--helper: `bisect_start` shell function partially in C

Reimplement the `bisect_start` shell function partially in C and add
`bisect-start` subcommand to `git bisect--helper` to call it from
git-bisect.sh .

The last part is not converted because it calls another shell function.
`bisect_start` shell function will be completed after the `bisect_next`
shell function is ported in C.

Using `--bisect-start` subcommand is a temporary measure to port shell
function in C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired and will be called by some
other methods.

Also introduce a method `bisect_append_log_quoted` to keep things short
and crisp.

Note that we are a bit lax about command-line parsing because the helper
is not supposed to be called by the user directly (but only from the git
bisect script).

Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Helped-by: Stephan Beyer <s-beyer@gmx.net>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

bisect--helper: `get_terms` & `bisect_terms` shell... Pranit Bauva Wed, 2 Jan 2019 15:38:35 +0000 (07:38 -0800)

bisect--helper: `get_terms` & `bisect_terms` shell function in C

Reimplement the `get_terms` and `bisect_terms` shell function in C and
add `bisect-terms` subcommand to `git bisect--helper` to call it from
git-bisect.sh .

Using `--bisect-terms` subcommand is a temporary measure to port shell
function in C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by some other methods.

Also use error() to report "no terms defined" and accordingly change the
test in t6030.

We need to use PARSE_OPT_KEEP_UNKNOWN here to allow for parameters that
look like options (e.g --term-good) but should not be parsed by
cmd_bisect__helper(). This change is safe because all other cmdmodes have
strict argc checks already.

Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

bisect--helper: `bisect_next_check` shell function... Pranit Bauva Wed, 2 Jan 2019 15:38:34 +0000 (07:38 -0800)

bisect--helper: `bisect_next_check` shell function in C

Reimplement `bisect_next_check` shell function in C and add
`bisect-next-check` subcommand to `git bisect--helper` to call it from
git-bisect.sh .

`bisect_voc` shell function is no longer useful now and is replaced by
using a char *[] of "new|bad" and "good|old" values.

Using `--bisect-next-check` is a temporary measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by some other methods.

Helped-by: Stephan Beyer <s-beyer@gmx.net>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

bisect--helper: `check_and_set_terms` shell function... Pranit Bauva Wed, 2 Jan 2019 15:38:33 +0000 (07:38 -0800)

bisect--helper: `check_and_set_terms` shell function in C

Reimplement the `check_and_set_terms` shell function in C and add
`check-and-set-terms` subcommand to `git bisect--helper` to call it from
git-bisect.sh

Using `--check-and-set-terms` subcommand is a temporary measure to port
shell function in C so as to use the existing test suite. As more
functions are ported, this subcommand will be retired but its
implementation will be called by some other methods.

check_and_set_terms() sets and receives two global variables namely
TERM_GOOD and TERM_BAD in the shell script. Luckily the file BISECT_TERMS
also contains the value of those variables so its appropriate to evoke the
method get_terms() after calling the subcommand so that it retrieves the
value of TERM_GOOD and TERM_BAD from the file BISECT_TERMS. The two
global variables are passed as arguments to the subcommand.

Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>