revision: introduce --exclude=<glob> to tame wildcards
People often find "git log --branches" etc. that includes _all_
branches is cumbersome to use when they want to grab most but except
some. The same applies to --tags, --all and --glob.
Teach the revision machinery to remember patterns, and then upon the
next such a globbing option, exclude those that match the pattern.
With this, I can view only my integration branches (e.g. maint,
master, etc.) without topic branches, which are named after two
letters from primary authors' names, slash and topic name.
It may be a bit rough around the edges, in that the pattern to give
the exclude option depends on what globbing option follows. In
these examples, the pattern "??/*" is used, not "refs/heads/??/*",
because the globbing option that follows the -"-exclude=<pattern>"
is "--branches". As each use of globbing option resets previously
set "--exclude", this may not be such a bad thing, though.
This reverts commit cdfd94837b27c220f70f032b596ea993d195488f, as it
does not just apply to "@" (and forms with modifiers like @{u}
applied to it), but also affects e.g. "refs/heads/@/foo", which it
shouldn't.
The basic idea of giving a short-hand might be good, and the topic
can be retried later, but let's revert to avoid affecting existing
use cases for now for the upcoming release.
Revert "git stash: avoid data loss when "git stash save" kills a directory"
This reverts commit a73653130edd6a8977106d45a8092c09040f9132, as it
has been reported that "ls-files --killed" is too time-consuming in
a deep directory with too many untracked crufts (e.g. $HOME/.git
tracking only a few files).
We'd need to revisit it later but "ls-files --killed" needs to be
optimized before it happens.
.mailmap: update long-lost friends with multiple defunct addresses
A handful of past contributors are recorded with multiple e-mail
addresses, all of which are undeliverable. With a lot of help from
Jonathan, we located all of them except for one person, and a pair
of addresses we suspect belong to a single person but we are not
certain.
Update the found ones with their currently preferred address, and
use the last known address to consolidate contributions by the lost
one.
Helped-by: Stefan Beller <stefanbeller@googlemail.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds no new names, but fixes the mistakes I made in the previous
commits. (94b410bba8, f4f49e225, c07a6bc57, 2013-07-12, .mailmap: Map
email addresses to names).
These mistakes are double white spaces between name and surname,
different capitalization in email address, or just the email address set
as name.
Also I forgot to include James Knight to the mailmap file.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t/t7407-submodule-foreach.sh there is a typo in one of the
path names given for a test step. The correct path is
nested1/nested2/.git, but nested1/nested1/nested2/.git is
given instead. The typo is hidden because this line also
accidentally omits the && chain operator. The omitted chain
also means the return values of all the previous commands in
this test are also being ignored.
Fix the path and add the chain operator so the entire test
sequence can be properly validated.
Signed-off-by: Phil Hord <hordp@cisco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
a469a1019352b8ef (silence some -Wuninitialized false positives;
2012-12-15) triggered "unused value" warnings when the return value of
opterror() and several other error-related functions was not used. 5ded807f7c0be10e (fix clang -Wunused-value warnings for error functions;
2013-01-16) applied a fix by adding #if !defined(__clang__) in cache.h
and git-compat-util.h, but misspelled it as #if !defined(clang) in
parse-options.h. Fix this.
This mistake went unnoticed because existing callers of opterror()
utilize its return value. 1158826394e162c5 (parse-options: add
OPT_CMDMODE(); 2013-07-30), however, adds a new invocation of opterror()
which ignores the return value, thus triggering the "unused value"
warning.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
fix typo in documentation of git-svn
Documentation/rev-list-options: add missing word in --*-parents
log doc: the argument to --encoding is not optional
t8001, t8002: fix "blame -L :literal" test on NetBSD
Sub-test 42 of t8001 and t8002 ("blame -L :literal") fails on NetBSD
with the following verbose output:
git annotate -L:main hello.c
Author F (expected 4, attributed 3) bad
Author G (expected 1, attributed 1) good
This is not caused by different behaviour of git blame or annotate on
that platform, but by different test input, in turn caused by a sed
command that forgets to add a newline on NetBSD. Here's the diff of the
commit that adds "goodbye" to hello.c, for Linux:
It also adds an extra TAB, but it is missing the newline character
after the semicolon.
The following patch gets rid of the extra TAB at the beginning, but
more importantly adds the missing newline at the end in a (hopefully)
portable way, mentioned in http://sed.sourceforge.net/sedfaq4.html.
The diff becomes this, on both Linux and NetBSD:
t3900: test rejecting log message with NULs correctly
It is not like that our longer term desire is to someday start
accept log messages with NULs in them, so it is wrong to mark a test
that demonstrates "git commit" that correctly fails given such an
input as "expect-failure". "git commit" should fail today, and it
should fail the same way in the future given a message with NUL in it.
The test file that the UTF-16 rejection test looks for is missing, but this went
unnoticed because the test is expected to fail anyway; as a consequence, the
test fails because the file containing the commit message is missing, and not
because the test file contains a NUL byte. Fix this by including a sample text
file containing a commit message encoded in UTF-16.
Signed-off-by: Brian M. Carlson <sandals@crustytoothpaste.net> Tested-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
.mailmap: Multiple addresses of Michael S. Tsirkin
Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Beller <stefanbeller@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
log doc: the argument to --encoding is not optional
$ git log --encoding
fatal: Option '--encoding' requires a value
$ git rev-list --encoding
fatal: Option '--encoding' requires a value
The argument to --encoding has always been mandatory. Unfortunately
manpages like git-rev-list(1), git-log(1), and git-show(1) have
described the option's syntax as "--encoding[=<encoding>]" since it
was first documented. Clarify by removing the extra brackets.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin port added a "not quite correct but a lot faster and good
enough for many lstat() calls that are only used to see if the
working tree entity matches the index entry" lstat() emulation some
time ago, and it started biting us in places. This removes it and
uses the standard lstat() that comes with Cygwin.
Recent topic that uses lstat on packed-refs file is broken when
this cheating lstat is used, and this is a simplest fix that is
also the cleanest direction to go in the long run.
* rj/cygwin-clarify-use-of-cheating-lstat:
cygwin: Remove the Win32 l/stat() implementation
Revert "cat-file: split --batch input lines on whitespace"
This reverts commit c334b87b30c1464a1ab563fe1fb8de5eaf0e5bac; the
update assumed that people only used the command to read from
"rev-list --objects" output, whose lines begin with a 40-hex object
name followed by a whitespace, but it turns out that scripts feed
random extended SHA-1 expressions (e.g. "HEAD:$pathname") in which
a whitespace has to be kept.
If the libexec directory doesn't exist, git-subtree gets installed as
$prefix/share/libexec/git-core file. This patch creates the directory
before installing git-subtree file into it.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
`echo -n` is non-portable. The POSIX specification says:
Conforming applications that wish to do prompting without <newline>
characters or that could possibly be expecting to echo a -n, should
use the printf utility derived from the Ninth Edition system.
Since all of the affected shell scripts use a POSIX shell shebang,
replace `echo -n` invocations with printf.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-slab.h: Fix memory allocation and addressing
The slab initialization code includes the calculation of the
slab 'elem_size', which is in turn used to determine the size
(capacity) of the slab. Each element of the slab represents an
array, of length 'stride', of 'elemtype'. (Note that it may be
clearer if the define_commit_slab macro parameter was called
'basetype' rather than 'elemtype'). However, the 'elem_size'
calculation incorrectly uses 'sizeof(struct slabname)' in the
expression, rather than 'sizeof(elemtype)'.
Within the slab access routine, <slabname>_at(), the given commit
'index' is transformed into an (slab#, slot#) pair used to address
the required element (a pointer to the first element of the array
of 'elemtype' associated with that commit). The current code to
calculate these address coordinates multiplies the commit index
by the 'stride' which, at least for the slab#, produces the wrong
result. Using the commit index directly, without scaling by the
'stride', produces the correct 'logical' address.
Also, when allocating a new slab, the size of the allocation only
allows for a slab containing elements of single element arrays of
'elemtype'. This should allow for elements of an array of length
'stride' of 'elemtype'. In order to fix this, we need to change
the element size parameter to xcalloc() by multiplying the current
element size (sizeof(**s->slab)) by the s->stride.
Having changed the calculation of the slot#, we now need to convert
the logical 'nth_slot', by scaling with s->stride, into the correct
physical address.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: tweak empty cherry pick advice for sequencer
When we refuse to make an empty commit, we check whether we
are in a cherry-pick in order to give better advice on how
to proceed. We instruct the user to repeat the commit with
"--allow-empty" to force the commit, or to use "git reset"
to skip it and abort the cherry-pick.
In the case of a single cherry-pick, the distinction between
skipping and aborting is not important, as there is no more
work to be done afterwards. When we are using the sequencer
to cherry pick a series of commits, though, the instruction
is confusing: does it skip this commit, or does it abort the
rest of the cherry-pick?
It does skip, after which the user can continue the
cherry-pick. This is the right thing to be advising the user
to do, but let's make it more clear what will happen, both
by using the word "skip", and by mentioning that the rest of
the sequence can be continued via "cherry-pick --continue"
(whether we skip or take the commit).
Noticed-by: Ramkumar Ramachandra <artagnon@gmail.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs/git-tag: explain lightweight versus annotated tags
Stress the difference between the two with a suggestion on
when the user should use one in place of the other.
Signed-off-by: Daniele Segato <daniele.segato@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --global section of git-config(1) currently reads like:
For writing options: write to global /.gitconfig file rather than the
^
start tilde
repository .git/config, write to $XDG_CONFIG_HOME/git/config file if
this file exists and the/.gitconfig file doesn’t.
^
end tilde
Instead of tilde (~) being interpreted literally, asciidoc subscripts
the text between the two tildes. To fix this problem, use backticks (`)
to quote all the paths in the file uniformly, just like config.txt does.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/rm.c: consolidate error reporting for removing submodules
We have two (not identical) copies of error reporting when
attempting to remove submodules that have their repositories
embedded within them. Add a helper function so that we do not have
to repeat similar error messages with subtly different wording
without a good reason.
We mention twice that the from_ident field of struct
pretty_print_context is internal.
The first comment was added by 10f2fbf, which prepares the
struct for internal fields, and then the second by a908047,
which actually adds such a field. This was a mistake made
when re-rolling the series on the list; the comment should
have been removed from the latter commit.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A helper to read from a set of format-patch output files or a range
of commits and find those who may have insights to the code that
the changes touch by running a series of "git blame" commands.
* es/contacts:
contrib: contacts: add documentation
contrib: contacts: add mailmap support
contrib: contacts: interpret committish akin to format-patch
contrib: contacts: add ability to parse from committish
contrib: add git-contacts helper
The tip one does _not_ revert c869753e (Force core.filemode to
false on Cygwin., 2006-12-30) on purpose, so that people can
still retain the old behaviour if they wanted to.
If somebody wants to only know on-disk footprint of an object
without having to know its type or payload size, we can bypass a
lot of code to cheaply learn it.
* jk/cat-file-batch-optim:
Fix some sparse warnings
sha1_object_info_extended: pass object_info to helpers
sha1_object_info_extended: make type calculation optional
packed_object_info: make type lookup optional
packed_object_info: hoist delta type resolution to helper
sha1_loose_object_info: make type lookup optional
sha1_object_info_extended: rename "status" to "type"
cat-file: disable object/refname ambiguity check for batch mode
On systems that understand a CRLF as a line ending, tests in this
script that worked on files with CRLF line endings using "grep" to
extract matching lines may lose the CR at the end of lines that
match, causing the actual output not to match the expected output.
* ml/avoid-using-grep-on-crlf-files:
test-lib.sh - define and use GREP_STRIPS_CR
* sb/misc-fixes:
diff.c: Do not initialize a variable, which gets reassigned anyway.
commit: Fix a memory leak in determine_author_info
daemon.c:handle: Remove unneeded check for null pointer.
* tr/line-log:
t4211: fix incorrect rebase at f8395edc (range-set: satisfy non-empty ranges invariant)
line-log: fix "log -LN" crash when N is last line of file
range-set: satisfy non-empty ranges invariant
t4211: demonstrate crash when first -L encountered is empty range
t4211: demonstrate empty -L range crash
range-set: fix sort_and_merge_range_set() corner case bug
git-clean: implement partial matching for selection
Document for interactive git-clean says: "You also could say `c` or
`clean` above as long as the choice is unique". But it's not true,
because only hotkey `c` and full match (`clean`) could work.
Implement partial matching via find_unique function to make the
document right.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added in ff5effd (include agent identifier in
capability string, 2012-08-03), but neither the syntax nor
the semantics were ever documented outside of the commit
message.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs: note that receive-pack knows side-band-64k capability
The protocol-capabilities documentation notes that any
capabilities not explicitly mentioned for receive-pack work
only for upload-pack.
Receive-pack has advertised and understood side-band-64k
since 38a81b4 (receive-pack: Wrap status reports inside
side-band-64k, 2010-02-05), but we do not mention it
explicitly. Let's do so.
Note that receive-pack does not understand side-band, which
was obsolete by that point.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-completion.bash: replace zsh notation that breaks bash 3.X
50c5885e (git-completion.bash: replace zsh notation that breaks bash
3.X, 2013-01-18) fixed a zsh-ism introduced earlier to append to an
array, which older versions of bash (3.0) did not grok. This was
again broken by 734b2f05 (completion: synchronize zsh wrapper,
2013-05-08).
Cherry-pick the fix again to let those with older bash use the
completion script.
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>