show-branch: show all local heads when only giving one rev along --topics
"git show-branch --topics <rev> <revs>..." displays ancestry graph, only
considering commits that are in all given revs, except the first one.
"git show-branch" displays ancestry graph for all local branches.
Unfortunately, "git show-branch --topics <rev>" only prints out the rev
info for the given rev, and nothing else, e.g.:
$ git show-branch --topics origin/master
[origin/master] Sync with 2.3.3
While there is an option to add all remote-tracking branches (-r), and
another to add all local+remote branches (-a), there is no option to add
only local branches. Adding such an option could be considered, but a
user would likely already expect that the above command line considers
the lack of rev other than for --topics as meaning all local branches,
like when there is no argument at all.
Moreover, when using -r and -a along with --topics, the first local or
remote-tracking branch, depending on alphabetic order is used instead of
the one given after --topics (any rev given on the command line is
actually simply ignored when either -r or -a is given). And if no rev is
given at all, the fact that the first alphetical branch is the base of
topics is probably not expected by users (Maybe --topics should always
require one rev on the command line?)
This change makes
"show-branch --topics $rev"
act as
"show-branch --topics $rev $(git for-each-ref refs/heads
--format='%(refname:short)')"
prune --worktrees: fix expire vs worktree existence condition
`git prune --worktrees` was pruning worktrees which were non-existent OR
expired, while it rather should prune those which are orphaned AND
expired, as git-checkout documentation describes. Fix it.
Add test 'not prune proper checkouts', which uses valid but expired
worktree.
Modify test 'not prune recent checkouts' to remove the worktree before
pruning - link in worktrees still must survive. In older form it is
useless because would pass always when the other test passes.
Signed-off-by: Max Kirillov <max@max630.net> Acked-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b3256eb (standardize and improve lookup rules for external local
repos), enter_repo() was modified to use a different precedence
ordering of suffixes for DWIM of the repository path, and to ensure
that the repository path is actually valid instead of just testing
for existence.
However, the documentation was not modified to reflect these
changes. Fix the documentation to match the code.
Documentation contributed by Jeff King.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt_shortstatus_print_tracking() calls shorten_unambiguous_ref(),
which returns a newly allocated memory the caller takes ownership
of; it is necessary to free `base` when the function is done with
it.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick: fix docs describing handling of empty commits
Commit b27cfb0 (git-cherry-pick: Add keep-redundant-commits
option, 2012-04-20), added the --keep-redundant-commits
option, and switched the default behavior (without that
option) to silently ignore empty commits. Later, the second
half of that commit was reverted in ac2b0e8 (cherry-pick:
regression fix for empty commits, 2012-05-29), but the
documentation added for --keep-redundant-commits was never
updated to match. Let's do so now.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_file: squelch "packfile cannot be accessed" warnings
When we find an object in a packfile index, we make sure we
can still open the packfile itself (or that it is already
open), as it might have been deleted by a simultaneous
repack. If we can't access the packfile, we print a warning
for the user and tell the caller that we don't have the
object (we can then look in other packfiles, or find a loose
version, before giving up).
The warning we print to the user isn't really accomplishing
anything, and it is potentially confusing to users. In the
normal case, it is complete noise; we find the object
elsewhere, and the user does not have to care that we racily
saw a packfile index that became stale. It didn't affect the
operation at all.
A possibly more interesting case is when we later can't find
the object, and report failure to the user. In this case the
warning could be considered a clue toward that ultimate
failure. But it's not really a useful clue in practice. We
wouldn't even print it consistently (since we are racing
with another process, we might not even see the .idx file,
or we might win the race and open the packfile, completing
the operation).
This patch drops the warning entirely (not only from the
fill_pack_entry site, but also from an identical use in
pack-objects). If we did find the warning interesting in the
error case, we could stuff it away and reveal it to the user
when we later die() due to the broken object. But that
complexity just isn't worth it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs: clarify what git-rebase's "-p" / "--preserve-merges" does
Ignoring a merge can be read as ignoring the changes a merge commit
introduces altogether, as if the entire side branch the merge commit
merged was removed from the history. But that is not what happens
if "-p" is not specified. What happens is that the individual
commits a merge commit introduces are replayed in order, and only
any possible merge conflict resolutions or manual amendments to the
merge commit are ignored.
Get this straight in the docs.
Also, do not say that merge commits are *tried* to be recreated. As that is
true almost everywhere it is better left unsaid.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-options.h: OPTION_{BIT,SET_INT} do not store pointer to defval
When 20d1c652 (parse-options: remove unused OPT_SET_PTR, 2014-03-30)
removed OPT_SET_PTR, the comment in the header that describes what
the option did to defval field was left behind by mistake. Remove
it.
Signed-off-by: Ivan Ukhov <ivan.ukhov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
"git fetch" that fetches a commit using the allow-tip-sha1-in-want
extension could have failed to fetch all the requested refs.
* jk/fetch-pack:
fetch-pack: remove dead assignment to ref->new_sha1
fetch_refs_via_pack: free extra copy of refs
filter_ref: make a copy of extra "sought" entries
filter_ref: avoid overwriting ref->old_sha1 with garbage
Merge branch 'tg/fix-check-order-with-split-index' into maint
The split-index mode introduced at v2.3.0-rc0~41 was broken in the
codepath to protect us against a broken reimplementation of Git
that writes an invalid index with duplicated index entries, etc.
* tg/fix-check-order-with-split-index:
read-cache: fix reading of split index
Merge branch 'jk/prune-with-corrupt-refs' into maint
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
File file11 is copied from file2 and diff-tree correctly reports
this file as its the source. But it is possible that the diff-tree
algorithm detects file10, which was also copied from file2, as the
origin of the new file.
This fix uses a case statement to support both files as the source
of file11, as was done in other tests in this file.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/leaks:
http: release the memory of a http pack request as well
read-cache: fix memleak
add_to_index(): free unused cache-entry
commit.c: fix a memory leak
http-push: remove unneeded cleanup
merge-recursive: fix memleaks
merge-blobs.c: fix a memleak
builtin/apply.c: fix a memleak
update-index: fix a memleak
read-cache: free cache entry in add_to_index in case of early return
Merge branch 'js/completion-ctags-pattern-substitution-fix' into maint
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
diff-no-index: align D/F handling with that of normal Git
When a commit changes a path P that used to be a file to a directory
and creates a new path P/X in it, "git show" would say that file P
was removed and file P/X was created for such a commit.
However, if we compare two directories, D1 and D2, where D1 has a
file D1/P in it and D2 has a directory D2/P under which there is a
file D2/P/X, and ask "git diff --no-index D1 D2" to show their
differences, we simply get a refusal "file/directory conflict".
Surely, that may be what GNU diff does, but we can do better and it
is easy to do so.
docs: clarify "preserve" option wording for git-pull
The "also" sounds as if "preserve" does a rebase as an additional
step that "true" would not do, but that is not the case. Clarify
this by omitting "also", and rewording the sentence a bit.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
The help text for the --force-with-lease option to git-push
does not parse cleanly. Clean up the wording and syntax to
be more sensible. Also remove redundant information in the
"--force-with-lease alone" description.
Signed-off-by: Phil Hord <hordp@cisco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" was supposed to be a poor-man's approach to
allow using Git diff goodies outside of a Git repository, without
having to patch mainstream diff implementations.
Unlike a POSIX diff that treats "diff D F" (or "diff F D") as a
request to compare D/F and F (or F and D/F) when D is a directory
and F is a file, however, we did not accept such a command line and
instead barfed with "file/directory conflict".
Imitate what POSIX diff does and append the basename of the file
after the name of the directory before comparing.
The run-command interface was easy to abuse and make a pipe for us
to read from the process, wait for the process to finish and then
attempt to read its output, which is a pattern that lead to a
deadlock. Fix such uses by introducing a helper to do this
correctly (i.e. we need to read first and then wait the process to
finish) and also add code to prevent such abuse in the run-command
helper.
* jk/run-command-capture:
run-command: forbid using run_command with piped output
trailer: use capture_command
submodule: use capture_command
wt-status: use capture_command
run-command: introduce capture_command helper
wt_status: fix signedness mismatch in strbuf_read call
wt-status: don't flush before running "submodule status"
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
The split-index mode introduced at v2.3.0-rc0~41 was broken in the
codepath to protect us against a broken reimplementation of Git
that writes an invalid index with duplicated index entries, etc.
* tg/fix-check-order-with-split-index:
read-cache: fix reading of split index
"git fetch" that fetches a commit using the allow-tip-sha1-in-want
extension could have failed to fetch all the requested refs.
* jk/fetch-pack:
fetch-pack: remove dead assignment to ref->new_sha1
fetch_refs_via_pack: free extra copy of refs
filter_ref: make a copy of extra "sought" entries
filter_ref: avoid overwriting ref->old_sha1 with garbage
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
"git log --graph --no-walk A B..." is a otcnflicting request that
asks nonsense; no-walk tells us show discrete points in the
history, while graph asks to draw connections between these
discrete points. Forbid the combination.
* dj/log-graph-with-no-walk:
revision: forbid combining --graph and --no-walk
"git rev-list --bisect --first-parent" does not work (yet) and can
even cause SEGV; forbid it. "git log --bisect --first-parent"
would not be useful until "git bisect --first-parent" materializes,
so it is also forbidden for now.
* kd/rev-list-bisect-first-parent:
rev-list: refuse --first-parent combined with --bisect
The idea of this helper is that we want to save the current
value of a config variable and then restore it again after
the test completes. However, there's no point in actually
saving the value; it should always be restored to the string
"never" (which you can confirm by instrumenting
save_confirm to print the value it finds).
Let's just replace it with a single test_when_finished call.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0020: use test_* helpers instead of hand-rolled messages
These tests are not wrong, but it is much shorter and more
idiomatic to say "verbose" or "test_must_fail" rather than
printing our own messages on failure. Likewise, there is no
need to say "happy" at the end of a test; the test suite
takes care of that.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since shell loops may drop the exit code of failed commands
inside the loop, some tests try to keep track of the status
by setting a variable. This can end up cumbersome and hard
to read; it is much simpler to just exit directly from the
loop using "return 1" (since each case is either in a helper
function or inside a test snippet).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t: fix some trivial cases of ignored exit codes in loops
These are all cases where we do a setup step of the form:
for i in $foo; do
set_up $i || break
done &&
more_setup
would not notice a failure in set_up (because break always
returns a 0 exit code). These are just setup steps that we
do not expect to fail, but it does not hurt to be defensive.
Most can be fixed by converting the "break" to a "return 1"
(since we eval our tests inside a function for just this
purpose). A few of the loops are inside subshells, so we can
use just "exit 1" to break out of the subshell. And a few
can actually be made shorter by just unrolling the loop.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking a list of file mtimes, we use a loop and break
out early from the loop if any entry does not match.
However, the exit code of a loop exited via break is always
0, meaning that the test will fail to notice we had a
mismatch. Since the loop is inside a function, we can fix
this by doing an early "return 1".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we test deleting notes, we run "git notes remove" in a
loop. However, the exit value of the loop will only reflect
the final note we process. We should break out of the loop
with a failing exit code as soon as we see a problem.
Note that we can call "exit 1" here without explicitly
creating a subshell, because the while loop on the
right-hand side of a pipe executes in its own implicit
subshell.
Note also that the "break" above does not suffer the same
problem; it is meant to exit the loop early at a certain
number of iterations. We can bump it into the conditional of
the loop to make this more obvious.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
will correctly break out of the loop when we see a failure
of one item, but the resulting exit code will always be
zero. We can fix that by putting the loop into a function or
subshell, but in this case it is simpler still to just
unroll the loop. We do add a helper function, which
hopefully makes the end result even more readable (in
addition to being shorter).
Reported-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When copying the test repository, we try to detect whether
the copy succeeded. However, most of the heavy lifting is
done inside a for loop, where our "break" will lose the exit
code of the failing "cp". We can take advantage of the fact
that we are in a subshell, and just "exit 1" to break out
with a code.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'master' of git://ozlabs.org/~paulus/gitk
* 'master' of git://ozlabs.org/~paulus/gitk:
gitk: Update .po files
gitk: l10n: Add Catalan translation
gitk: Fix typo in Russian translation
gitk: Remove tcl-format flag from a message that shouldn't have it
gitk: Pass --invert-grep option down to "git log"
gitk: Synchronize config file writes
gitk: Report errors in saving config file
gitk: Only write changed configuration variables
gitk: Enable mouse horizontal scrolling in diff pane
gitk: Default wrcomcmd to use --pretty=email
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
t1501-worktree.sh does not copy the shared index in the "relative
$GIT_WORK_TREE and git subprocesses" test, which makes the test fail
when GIT_TEST_SPLIT_INDEX is set. Copy the shared index as well in
order to fix this.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0302: test credential-store support for XDG_CONFIG_HOME
t0302 now tests git-credential-store's support for the XDG user-specific
configuration file $XDG_CONFIG_HOME/git/credentials. Specifically:
* Ensure that the XDG file is strictly opt-in. It should not be created
by git at all times if it does not exist.
* Conversely, if the XDG file exists, ~/.git-credentials should
not be created at all times.
* If both the XDG file and ~/.git-credentials exists, then both files
should be used for credential lookups. However, credentials should
only be written to ~/.git-credentials.
* Credentials must be erased from both files.
* $XDG_CONFIG_HOME can be a custom directory set by the user as per the
XDG base directory specification. Test that git-credential-store
respects that, but defaults to "~/.config/git/credentials" if it does
not exist or is empty.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Paul Tan <pyokagan@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add $XDG_CONFIG_HOME/git/credentials to the default credential search
path of git-credential-store. This allows git-credential-store to
support user-specific configuration files in accordance with the XDG
base directory specification[1].
~/.git-credentials has a higher precedence than
$XDG_CONFIG_HOME/git/credentials when looking up credentials. This
means that if any duplicate matching credentials are found in the xdg
file (due to ~/.git-credentials being updated by old versions of git or
outdated tools), they will not be used at all. This is to give the user
some leeway in switching to old versions of git while keeping the xdg
directory. This is consistent with the behavior of git-config.
However, the higher precedence of ~/.git-credentials means that as long
as ~/.git-credentials exist, all credentials will be written to the
~/.git-credentials file even if the user has an xdg file as having a
~/.git-credentials file indicates that the user wants to preserve
backwards-compatibility. This is also consistent with the behavior of
git-config.
To make this precedence explicit in docs/git-credential-store, add a new
section FILES that lists out the credential file paths in their order of
precedence, and explain how the ordering affects the lookup, storage and
erase operations.
Also, update the documentation for --file to briefly explain the
operations on multiple files if the --file option is not provided.
Since the xdg file will not be used unless it actually exists, to
prevent the situation where some credentials are present in the xdg file
while some are present in the home file, users are recommended to not
create the xdg file if they require compatibility with old versions of
git or outdated tools. Note, though, that "erase" can be used to
explicitly erase matching credentials from all files.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Jeff King <peff@peff.net> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Paul Tan <pyokagan@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-credential-store: support multiple credential files
Previously, git-credential-store only supported storing credentials in a
single file: ~/.git-credentials. In order to support the XDG base
directory specification[1], git-credential-store needs to be able to
lookup and erase credentials from multiple files, as well as to pick the
appropriate file to write to so that the credentials can be found on
subsequent lookups.
Note that some credential storage files may not be owned, readable or
writable by the user, as they may be system-wide files that are meant to
apply to every user.
Instead of a single file path, lookup_credential(), remove_credential()
and store_credential() now take a precedence-ordered string_list of
file paths. lookup_credential() expects both user-specific and
system-wide credential files to be provided to support the use case of
system administrators setting default credentials for users.
remove_credential() and store_credential() expect only the user-specific
credential files to be provided as usually the only config files that
users are allowed to edit are their own user-specific ones.
lookup_credential() will read these (user-specific and system-wide) file
paths in order until it finds the 1st matching credential and print it.
As some files may be private and thus unreadable, any file which cannot
be read will be ignored silently.
remove_credential() will erase credentials from all (user-specific)
files in the list. This is because if credentials are only erased from
the file with the highest precedence, a matching credential may still be
found in a file further down the list. (Note that due to the lockfile
code, this requires the directory to be writable, which should be so for
user-specific config files)
store_credential() will write the credentials to the first existing
(user-specific) file in the list. If none of the files in the list
exist, store_credential() will write to the filename specified by the
first item of the filename list. For backwards compatibility, this
filename should be "~/.git-credentials".
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Paul Tan <pyokagan@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the first look, a user may think the default version is "23". Even
with UNIX background, there's no reference anywhere close that may
indicate this is glob or regex.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-lib.c: adjust position of i-t-a entries in diff
Entries added by "git add -N" are reminder for the user so that they
don't forget to add them before committing. These entries appear in
the index even though they are not real. Their presence in the index
leads to a confusing "git status" like this:
On branch master
Changes to be committed:
new file: foo
Changes not staged for commit:
modified: foo
If you do a "git commit", "foo" will not be included even though
"status" reports it as "to be committed". This patch changes the
output to become
On branch master
Changes not staged for commit:
new file: foo
no changes added to commit
The two hunks in diff-lib.c adjust "diff-index" and "diff-files" so
that i-t-a entries appear as new files in diff-files and nothing in
diff-index.
Due to this change, diff-files may start to report "new files" for the
first time. "add -u" needs to be told about this or it will die in
denial, screaming "new files can't exist! Reality is wrong." Luckily,
it's the only one among run_diff_files() callers that needs fixing.
Now in the new world order, a hierarchy in the index that contain
i-t-a paths is written out as a tree object as if these i-t-a
entries do not exist, and comparing the index with such a tree
object that would result from writing out the hierarchy will result
in no difference. Update a test in t2203 that expected the i-t-a
entries to appear as "added to the index" in the comparison to
instead expect no output.
An earlier change eec3e7e4 (cache-tree: invalidate i-t-a paths after
generating trees, 2012-12-16) becomes an unnecessary pessimization
in the new world order---a cache-tree in the index that corresponds
to a hierarchy with i-t-a paths can now be marked as valid and
record the object name of the tree that results from writing a tree
object out of that hierarchy, as it will compare equal to that tree.
Reverting the commit is left for the future, though, as it is purely
a performance issue and no longer affects correctness.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
* jk/test-annoyances:
t5551: make EXPENSIVE test cheaper
t5541: move run_with_cmdline_limit to test-lib.sh
t: pass GIT_TRACE through Apache
t: redirect stderr GIT_TRACE to descriptor 4
t: translate SIGINT to an exit