notes: allow --dry-run for -n and --verbose for -v
For consistency with other git commands, let the prune subcommand of
git notes accept the long options --dry-run and --verbose for the
respective short ones -n and -v.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users reading git-apply documentation may also be interested in git-am,
especially after receiving an email created with git-format-patch. The
documentation for git-am already references git-apply. Add the reverse.
Signed-off-by: Brad King <brad.king@kitware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test would not fail if the filtering failed to do anything, since
in
test -z "$(git diff HEAD directorymoved:newsubdir)"'
'directorymoved:newsubdir' is not valid, so git-diff fails without
printing anything on stdout. But then the exit status of git-diff is
lost, whereas test -z "" succeeds.
Use 'git diff --exit-code' instead, which does the right thing and has
the added bonus of showing the differences if there are any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pt/git-gui:
git-gui: fix size and position of window panes on startup
git-gui: mc cannot be used before msgcat has been loaded
git-gui: use textconv filter for diff and blame
git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32
git-gui: fix shortcut creation on cygwin
git-gui: fix PATH environment for mingw development environment
git-gui: fix usage of _gitworktree when creating shortcut for windows
git-gui: fix "Explore Working Copy" for Windows again
git-gui: fix usage of themed widgets variable
git-gui: Handle failure of core.worktree to identify the working directory.
git-gui: check whether systems nice command works or disable it
test-lib: Remove 3 year old no-op --no-python option
The --no-python option was added to test-lib.sh by Johannes Schindelin
in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C
Hamano in 7cdbff14 the same year.
Over three years is long enough before removing this old wart which
was retained for backwards compatibility. Our tests have been using
NO_PYTHON and "test_have_prereq PYTHON" for a long time now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the tests with --quiet under a TAP harness will always fail,
since a TAP harness always needs actual test output to go along with
the plan that's being emitted.
Change the test-lib.sh to ignore the --quiet option under
HARNESS_ACTIVE to work around this. Then users that have --quiet in
their GIT_TEST_OPTS can run tests under prove(1) without everything
breaking.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: fix size and position of window panes on startup
git-gui: mc cannot be used before msgcat has been loaded
git-gui: use textconv filter for diff and blame
git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32
git-gui: fix shortcut creation on cygwin
git-gui: fix PATH environment for mingw development environment
git-gui: fix usage of _gitworktree when creating shortcut for windows
git-gui: fix "Explore Working Copy" for Windows again
git-gui: fix usage of themed widgets variable
git-gui: Handle failure of core.worktree to identify the working directory.
git-gui: check whether systems nice command works or disable it
the outermost quoting is required, as otherwise all runs of arbitrary
whitespace inside the resulting 'set -- ...' call would be collapsed
into a single space.
This was exposed as a result of our new use of cat <<\EOF since 47e9cd2 (parseopt: wrap rev-parse --parseopt usage for eval
consumption, 2010-06-12), but has always been a problem when handling
arguments containing e.g. newlines.
Point this out in the documentation, and in particular correct the
example that did not have the quotes.
Noticed-by: Joshua Jensen <jjensen@workspacewhiz.com> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It introduced a macro to reduce repeated assignments to three fields,
but an unrelated and incorrect change snuck in by mistake, which broke
commands like "git diff-files -p --submodule".
git-gui: fix size and position of window panes on startup
The themed panedwindow needs to have the sash position set after the
widget has been mapped therefore apply this setting in the Map event
binding. To avoid visible redraws as the application is constructed
the main window should be withdrawn until all the widgets have been added
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Create a checkbox "Use Textconv For Diffs and Blame" in git-gui options.
If checked and if the driver for the concerned file exists, git-gui calls diff
and blame with --textconv option
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr> Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr> Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32
On Windows the Control-C binding is used to copy and is mapped to the Tk
virtual event <<Copy>>. In the initial git-gui dialog this is also bound
as an accelerator for the Clone menu item. The effect is that both bindings
run, copying the text but resetting the clone page or switching to the clone
page when the user tries to copy text from one of the entry fields.
This patch avoids this by using Control-L instead for Windows only.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
When the user tried to create a desktop icon with git gui on cygwin
wscript was complaining about an unknown option and displaying the
non-native path as such.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
git-gui: fix PATH environment for mingw development environment
When creating a desktop shortcut from the gui the shortcut directly
starts wish with the git-gui script. In the msysgit development
environment some dll's reside in the mingw/bin directory which causes
that git can not start because libiconv2.dll is not found.
When using such a link the error is even more cryptic stating:
"child killed: unknown signal"
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
git-gui: fix "Explore Working Copy" for Windows again
It has already been fixed in commit 454efb47 (git-gui (Win): make
"Explore Working Copy" more robust, 2009-04-01), but has been broken in
commit 21985a11 (git-gui: handle non-standard worktree locations,
2010-01-23) by accidentally replacing too much with a new variable.
The problem can be reproduced when starting git-gui from within a
subdirectory. The solution is to convert the path name, explorer.exe is
invoked with, to a platform native name.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Fix git rebase --continue to work with touched files
When performing a non-interactive rebase, sometimes
"git rebase --continue" will fail if an unmodified file is
touched in the working directory:
You must edit all merge conflicts and then
mark them as resolved using git add
This is caused by "git diff-files" reporting a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-files" as is done in git-rebase--interactive.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of "git ls-files -t" is very misleading (see
http://thread.gmane.org/gmane.comp.version-control.git/126516 and
http://thread.gmane.org/gmane.comp.version-control.git/144394/focus=144397
for examples of mislead users) and badly documented, hence we point the
users to superior alternatives.
The feature is marked as "semi-obsolete" but not "scheduled for removal"
since it's a plumbing command, scripts might use it, and Git testsuite
already uses it to test the state of the index.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
`description` is a short string to describe the effect of the option.
It shall begin with a lower-case letter and a full stop (`.`) shall be
omitted at the end.
It also makes it less confusing if the argument is 'no.' or 'no'.
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify help message when no remote is specified in fetch/pull.
The message is especially confusing when "git fetch" is ran from "git
pull", for users not aware of "git fetch". The new message makes it clear
that "fetch" means "fetch new revisions", and gives hint on the solution.
We don't add a advice.* configuration option since this message doesn't
appear in normal use, and shouldn't disturb advanced users.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: add check-docs exception for gitrevisions
The manpage was added in 1ed6f2c (Documentation: gitrevisions,
2010-07-05), but since it does not have a corresponding git command,
it needs an exception for check-docs.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-push: Explain status output in more detail
Mention the effects of the receive.deny* family of options for the
"remote rejected" case. While there, also split up the explanation
into an easier-to-parse list format.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
INSTALL: configure /etc/xml/catalog to build docs on Cygwin
Without additional configuration steps, the documentation build on Cygwin
fails because the XML catalog is missing required rewrites for certain
docbook resources.
This patch documents the required configuration.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3700-add: fix dependence on stdout and stderr buffering
One test case checked the stdout and stderr of 'git add' by constructing a
single 'expect' file that contained both streams. But when the command
runs, the order of stdout and stderr output is unpredictable because it
depends on how the streams are buffered. At least on Windows, the buffering
is different from what the test case expected. Hence, check the two output
texts separately.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase--interactive.sh: use printf instead of echo to print commit message
On systems with an echo which defaults to the XSI-conformant behavior
(Solaris, or others using Ksh), echo will interpret certain backslashed
characters as control sequences. This can cause a problem for interactive
rebase when it is used to rebase commits whose commit "subject" (the first
line) contains any of these backslashed sequences. In this case, echo will
substitute the control sequence for the backslashed characters and either
the rebased commit message will differ from the original, or the rebase
process will fail. Neither is desirable.
So work around this issue by replacing the echo statements used to print
out portions of the commit message, with printf.
Also, add a test to test for this breakage.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.6:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
* maint-1.6.5:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
git-instaweb: Don't assume Apache executable is named apache2
On Arch Linux, the executable for the Apache HTTP server keeps
the 'httpd' name and is not named 'apache2'. The path to the
server modules also contains 'httpd' rather than 'apache2'.
Remove some of these assumptions and add the httpd name in where
it may be required. Finally, make some slight style adjustments
to the code we are touching to make it fit the style of the rest
of the script.
Signed-off-by: Dan McGee <dpmcgee@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net>
We were passing the non-existent GIT_EXEC_DIR through instead of the real
GIT_EXEC_PATH. In addition, these weren't being passed at all for CGI (non
mod_perl) execution so get them included there as well.
Signed-off-by: Dan McGee <dpmcgee@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net>
These two tests weren't about how "git reflog show <branch>" exits when
there is no reflog, but were about "checkout" and "branch" create or not
create reflog when creating a new <branch>. Update the tests to check
what we are interested in, using "git rev-parse --verify".
Also lose tests based on "test -f .git/logs/refs/heads/<branch>" from
nearby, to avoid exposing this particular implementation detail
unnecessarily.
t/README: correct an exception when breaking a && chain in tests
The correct advice should have been taken from c289c31 (t/t7006: ignore
return status of shell's unset builtin, 2010-06-02). A real-life issue
we experienced was with "unset", not with "export" (exporting an
unset variable may have similar portability issues, though).
t/{t5541,lib-httpd}: replace problematic '!()' notation with test_must_fail
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man
page describe it as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t3700: convert two uses of negation operator '!' to use test_must_fail
These two lines use the negation '!' operator to negate the result of a
simple command. Since these commands do not contain any pipes or other
complexities, the test_must_fail function can be used and is preferred
since it will additionally detect termination due to a signal.
This was noticed because the second use of '!' does not include a space
between the '!' and the opening parens. Ksh interprets this as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some have found the wording of the description to be somewhat ambiguous
with respect to when it is desirable to use test_must_fail instead of
"! <git-command>". Tweak the wording somewhat to hopefully clarify that
it is _because_ test_must_fail can detect segmentation fault that it is
desirable to use it instead of "! <git-command>".
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct responses to a D and a T line in .git/objects/info/packs
are the same, so combine their case arms. In both cases we already
‘goto’ out of the switch so while at it, remove a redundant ‘break’
to avoid yet another line of code.
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com> Reviewed-by: Jonathan Nieder <jrnieder <at> gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the git add options were listed in the synopsis until the
--ignore-missing option was added. Change that so that the git add
documentation now has the complete listing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule add: Require the new --force option to add ignored paths
To make the behavior of "git submodule add" more consistent with "git add"
ignored submodule paths should not be silently added when they match an
entry in a .gitignore file. To be able to override that default behavior
in the same way as we can do that for "git add", the new option "--force"
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The persistent memoization support introduced in commit 8bff7c538
relied on global destruction to write cached data, which was leading
to segfaults in some Perl configurations. Calling Memoize::unmemoize
in the END block forces the cache writeout to be performed earlier,
thus avoiding the bug.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Acked-by: Eric Wong <normalperson@yhbt.net>
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The svn-fe tool takes a Subversion dump file as input and produces
a fast-import stream as output. This can be useful as a low-level
tool in building other importers, or for debugging the vcs-svn
library.
make svn-fe
make svn-fe.1
to test.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we tried to make sure that the trees we get are what A...B
syntax produced, by checking that earlier ones are all marked
uninteresting (which has to be true as they are merge bases),
there are two remaining ones that are interesting, and they are
marked as non-symmetric-left and symmetric-left respectively.
The "the last two must be interesting" condition is however wrong when one
is an ancestor of the other between A and B (i.e. fast-forward). In such
a case, one of them is marked uninteresting.
* jn/paginate-fix:
git --paginate: paginate external commands again
git --paginate: do not commit pager choice too early
tests: local config file should be honored from subdirs of toplevel
t7006: test pager configuration for several git commands
t7006 (pager): introduce helper for parameterized tests
* mg/revision-doc:
Documentation: link to gitrevisions rather than git-rev-parse
Documentation: gitrevisions
Documentation: split off rev doc into include file
* bc/maint-makefile-fixes:
Makefile: work around ksh's failure to handle missing list argument to for loop
Makefile: remove some unnecessary curly braces
Documentation: add submodule.* to the big configuration variable list
The url, path, and the update items in [submodule "foo"] stanzas
are nicely explained in the .gitmodules and ‘git submodule’
documentation. Point there from the config documentation.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is already excellent documentation for this facility in
git-submodule.1, but it is not so discoverable.
Relative paths in .gitmodules can be useful for serving the
same repository over multiple protocols, for example.
Thanks to Peter for pointing this out.
Cc: Peter Krefting <peter@softwolves.pp.se> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 452e225 (gitweb: fix esc_param, 2009-10-13) fixed CGI escaping
rules used in esc_url. A very similar logic exists in esc_param and needs
to be fixed the same way.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
73e25e7c (git --paginate: do not commit pager choice too early,
2010-06-26) failed to take some cases into account.
1b. Builtins that do not use RUN_SETUP (like git config) do
not find GIT_DIR set correctly when the pager is launched
from run_builtin(). So the core.pager configuration is
not honored from subdirectories of the toplevel for them.
4a. External git commands (like git request-pull) relied on the
early pager launch to take care of handling the -p option.
Ever since 73e25e7c, they do not honor the -p option at all.
4b. Commands invoked through ! aliases (like ls) were also relying
on the early pager launch.
Fix (4a) by launching the pager (if requested) before running such a
“dashed external”. For simplicity, this still does not search for a
.git directory before running the external command; when run from a
subdirectory of the toplevel, therefore, the “[core] pager”
configuration is still not honored.
Fix (4b) by launching pager if requested before carrying out such an
alias. Actually doing this has no effect, since the pager (if any)
would have already been launched in a failed attempt to try a
dashed external first. The choice-of-pager-not-honored-from-
subdirectory bug still applies here, too.
(1b) is not a regression. There is no need to fix it yet.
Noticed by Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-tree: fix where two branches share no changes
15b4f7a (merge-tree: use ll_merge() not xdl_merge(), 2010-01-16)
introduced a regression to merge-tree to cause it to segfault when merging
files which existed in one branch, but not in the other or in the
merge-base. This was caused by referencing entry->path at a time when
entry was known to be possibly-NULL.
To correct the problem, we save the path of the entry we came in with,
as the path should be the same among all the stages no matter which
sides are involved in the merge.
Signed-off-by: Will Palmer <wmpalmer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>