When "git p4" imports changelist that removes paths, it failed to
convert pathnames when the p4 used encoding different from the one
used on the Git side. This has been corrected.
* ls/p4-path-encoding:
git-p4: fix git-p4.pathEncoding for removed files
The current code wants to record an error condition from
either ferror() or fclose(), but makes sure that we always
call both functions. So it can't use logical-OR "||", which
would short-circuit when ferror() is true. Instead, it uses
bitwise-OR "|" to evaluate both functions and set one or
more bits in the "err" flag if they reported a failure.
Unlike logical-OR, though, bitwise-OR does not introduce a
sequence point, and the order of evaluation for its operands
is unspecified. So a compiler would be free to generate code
which calls fclose() first, and then ferror() on the
now-freed filehandle.
There's no indication that this has happened in practice,
but let's write it out in a way that follows the standard.
Noticed-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.txt: fix formatting of submodule.alternateErrorStrategy section
Add missing `::` after the title.
Signed-off-by: David Pursehouse <dpursehouse@collab.net> Acked-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reset: add an example of how to split a commit into two
It is often useful to break a commit into multiple parts that are more
logical separations. This can be tricky to learn how to do without the
brute-force method if re-writing code or commit messages from scratch.
Add a section to the git-reset documentation which shows an example
process for how to use git add -p and git commit -c HEAD@{1} to
interactively break a commit apart and re-use the original commit
message as a starting point when making the new commit message.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git can't run bisect between 2048+ commits if use russian
translation, because the translated string is too long for the fixed
buffer it uses (this can be reproduced "LANG=ru_RU.UTF8 git bisect
start v4.9 v4.8" on linux sources).
Use xstrfmt() to format the message string to sufficiently sized
buffer instead to fix this.
Signed-off-by: Maxim Moseychuk <franchesko.salias.hudro.pedros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation explained what "git stash" does to the working
tree (after stashing away the local changes) in terms of "reset
--hard", which was exposing an unnecessary implementation detail.
* tg/stash-doc-cleanup:
Documentation/stash: remove mention of git reset --hard
show-branch: use skip_prefix to drop magic numbers
We make several starts_with() calls, only to advance
pointers. This is exactly what skip_prefix() is for, which
lets us avoid manually-counted magic numbers.
Helped-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The push-options given via the "--push-options" option were not
passed through to external remote helpers such as "smart HTTP" that
are invoked via the transport helper.
* sb/push-options-via-transport:
push options: pass push options to the transport helper
grep: treat revs the same for --untracked as for --no-index
git-grep has always disallowed grepping in a tree (as
opposed to the working directory) with both --untracked
and --no-index. But we traditionally did so by first
collecting the revs, and then complaining when any were
provided.
The --no-index option recently learned to detect revs
much earlier. This has two user-visible effects:
- we don't bother to resolve revision names at all. So
when there's a rev/path ambiguity, we always choose to
treat it as a path.
- likewise, when you do specify a revision without "--",
the error you get is "no such path" and not "--untracked
cannot be used with revs".
The rationale for doing this with --no-index is that it is
meant to be used outside a repository, and so parsing revs
at all does not make sense.
This patch gives --untracked the same treatment. While it
_is_ meant to be used in a repository, it is explicitly
about grepping the non-repository contents. Telling the user
"we found a rev, but you are not allowed to use revs" is
not really helpful compared to "we treated your argument as
a path, and could not find it".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
To push from or fetch to the current repository, remote helpers need
to know what repository that is. Accordingly, Git sets the GIT_DIR
environment variable to the path to the current repository when
invoking remote helpers.
There is a special case it does not handle: "git ls-remote" and "git
archive --remote" can be run to inspect a remote repository without
being run from any local repository. GIT_DIR is not useful in this
scenario:
- if we are not in a repository, we don't need to set GIT_DIR to
override an existing GIT_DIR value from the environment. If GIT_DIR
is present then we would be in a repository if it were valid and
would have called die() if it weren't.
- not setting GIT_DIR may cause a helper to do the usual discovery
walk to find the repository. But we know we're not in one, or we
would have found it ourselves. So in the worst case it may expend
a little extra effort to try to find a repository and fail (for
example, remote-curl would do this to try to find repository-level
configuration).
So leave GIT_DIR unset in this case. This makes GIT_DIR easier to
understand for remote helper authors and makes transport code less of
a special case for repository discovery.
Noticed using b1ef400e (setup_git_env: avoid blind fall-back to
".git", 2016-10-20) from 'next':
$ cd /tmp
$ git ls-remote https://kernel.googlesource.com/pub/scm/git/git
fatal: BUG: setup_git_env called without repository
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git ls-remote" command can be run outside of a
repository, but needs to look up configured remotes. The
config code is smart enough to handle this case itself, but
we also check the historical "branches" and "remotes" paths
in $GIT_DIR. The git_path() function causes us to blindly
look at ".git/remotes", even if we know we aren't in a git
repository.
For now, this is just an unlikely bug (you probably don't
have such a file if you're not in a repository), but it will
become more obvious once we merge b1ef400ee (setup_git_env:
avoid blind fall-back to ".git", 2016-10-20):
[now]
$ git ls-remote
fatal: No remote configured to list refs from.
[with b1ef400ee]
$ git ls-remote
fatal: BUG: setup_git_env called without repository
We can fix this by skipping these sources entirely when
we're outside of a repository.
The test is a little more complex than the demonstration
above. Rather than detect the correct behavior by parsing
the error message, we can actually set up a case where the
remote name we give is a valid repository, but b1ef400ee
would cause us to die in the configuration step.
This test doesn't fail now, but it future-proofs us for the b1ef400ee change.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We resolve HEAD and copy the result to a fixed-size buffer
with memcpy, never checking that it actually fits. This bug
dates back to 8098a178b (Add git-symbolic-ref, 2005-09-30).
Before that we used readlink(), which took a maximum buffer
size.
We can fix this by using resolve_refdup(), which duplicates
the buffer on the heap. That also lets us just check
for a NULL pointer to see if we have resolved HEAD, and
drop the extra head_p variable.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We copy the result of resolving HEAD into a buffer and keep
track of its length. But we never actually use the length
for anything besides the copy. Let's stop passing it around.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: do not diagnose misspelt revs with --no-index
If we are using --no-index, then our arguments cannot be
revs in the first place. Not only is it pointless to
diagnose them, but if we are not in a repository, we should
not be trying to resolve any names.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: avoid resolving revision names in --no-index case
We disallow the use of revisions with --no-index, but we
don't actually check and complain until well after we've
parsed the revisions.
This is the cause of a few problems:
1. We shouldn't be calling get_sha1() at all when we aren't
in a repository, as it might access the ref or object
databases. For now, this should generally just return
failure, but eventually it will become a BUG().
2. When there's a "--" disambiguator and you're outside a
repository, we'll complain early with "unable to resolve
revision". But we can give a much more specific error.
3. When there isn't a "--" disambiguator, we still do the
normal rev/path checks. This is silly, as we know we
cannot have any revs with --no-index. Everything we see
must be a path.
Outside of a repository this doesn't matter (since we
know it won't resolve), but inside one, we may complain
unnecessarily if a filename happens to also match a
refname.
This patch skips the get_sha1() call entirely in the
no-index case, and behaves as if it failed (with the
exception of giving a better error message).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we see "git grep pattern rev -- file" then we apply the
usual rev/pathspec disambiguation rules: any "rev" before
the "--" must be a revision, and we do not need to apply the
verify_non_filename() check.
But there are two bugs here:
1. We keep a seen_dashdash flag to handle this case, but
we set it in the same left-to-right pass over the
arguments in which we parse "rev".
So when we see "rev", we do not yet know that there is
a "--", and we mistakenly complain if there is a
matching file.
We can fix this by making a preliminary pass over the
arguments to find the "--", and only then checking the rev
arguments.
2. If we can't resolve "rev" but there isn't a dashdash,
that's OK. We treat it like a path, and complain later
if it doesn't exist.
But if there _is_ a dashdash, then we know it must be a
rev, and should treat it as such, complaining if it
does not resolve. The current code instead ignores it
and tries to treat it like a path.
This patch fixes both bugs, and tries to comment the parsing
flow a bit better.
It adds tests that cover the two bugs, but also some related
situations (which already worked, but this confirms that our
fixes did not break anything).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
in the absence of a Git repository, an error message will be printed:
fatal: BUG: setup_git_env called without repository
This is because "git grep" tries to interpret "--" as a rev. "git grep"
has always tried to first interpret "--" as a rev for at least a few
years, but this issue was upgraded from a pessimization to a bug in
commit 59332d1 ("Resurrect "git grep --no-index"", 2010-02-06), which
calls get_sha1 regardless of whether --no-index was specified. This bug
appeared to be benign until commit b1ef400 ("setup_git_env: avoid blind
fall-back to ".git"", 2016-10-20) when Git was taught to die in this
situation. (This "git grep" bug appears to be one of the bugs that
commit b1ef400 is meant to flush out.)
Therefore, always interpret "--" as signaling the end of options,
instead of trying to interpret it as a rev first.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, we set up the threads for grep before parsing
the non-option arguments. In 53b8d931b (grep: disable
threading in non-worktree case, 2011-12-12), the thread code
got bumped lower in the function because it now needed to
know whether we got any revision arguments.
That put a big block of code in between the parsing of revs
and the parsing of pathspecs, both of which share some loop
variables. That makes it harder to read the code than the
original, where the shared loops were right next to each
other.
Let's bump the thread initialization until after all of the
parsing is done.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When removing the hack for isatty(), we actually removed more than just
an isatty() hack: we removed the hack where internal data structures of
the MSVC runtime are modified in order to redirect stdout/stderr.
Instead of using that hack (that does not work with newer versions of
the runtime, anyway), we replaced it by reopening the respective file
descriptors.
What we forgot was to mark stderr as unbuffered again.
Reported by Hannes Sixt. Fixed with Jeff Hostetler's assistance.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A server can end up in a state where there are lots of unreferenced
loose objects (say, because many users are doing a bunch of rebasing
and pushing their rebased branches). Running "git gc --auto" in
this state would cause a gc.log file to be created, preventing
future auto gcs, causing pack files to pile up. Since many git
operations are O(n) in the number of pack files, this would lead to
poor performance.
Git should never get itself into a state where it refuses to do any
maintenance, just because at some point some piece of the maintenance
didn't make progress.
Teach Git to ignore gc.log files which are older than (by default)
one day old, which can be tweaked via the gc.logExpiry configuration
variable. That way, these pack files will get cleaned up, if
necessary, at least once per day. And operators who find a need for
more-frequent gcs can adjust gc.logExpiry to meet their needs.
There is also some cleanup: a successful manual gc, or a
warning-free auto gc with an old log file, will remove any old
gc.log files.
It might still happen that manual intervention is required
(e.g. because the repo is corrupt), but at the very least it won't
be because Git is too dumb to try again.
Signed-off-by: David Turner <dturner@twosigma.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rm: reuse strbuf for all remove_dir_recursively() calls, again
Don't throw the memory allocated for remove_dir_recursively() away after
a single call, use it for the other entries as well instead.
This change was done before in deb8e15a (rm: reuse strbuf for all
remove_dir_recursively() calls), but was reverted as a side-effect of 55856a35 (rm: absorb a submodules git dir before deletion). Reinstate
the optimization.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/stash: remove mention of git reset --hard
Don't mention git reset --hard in the documentation for git stash save.
It's an implementation detail that doesn't matter to the end user and
thus shouldn't be exposed to them. In addition it's not quite true for
git stash -p, and will not be true when a filename argument to limit the
stash to a few files is introduced.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation gives an example of the submodule foreach
command that uses both backticks and single-quotes. We stick
the whole thing inside "+" markers to make it monospace, but
the inside punctuation still needs escaping. We handle the
backticks with "{backtick}", and use backslash-escaping for
the single-quotes.
But we missed the escaping on the second quote. Fortunately,
asciidoc renders this unbalanced quote as we want (showing
the quote), but asciidoctor does not. We could fix it by
adding the missing backslash.
However, let's take a step back. Even when rendered
correctly, it's hard to read a long command stuck into the
middle of a paragraph, and the important punctuation is hard
to notice. Let's instead bump it into its own single-line
code block. That makes both the source and the rendered
result more readable, and as a bonus we don't have to worry
about quoting at all.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these options is missing the closing single-quote on
the option name. This understandably confuses asciidoc,
which ends up rendering a stray quote, like:
option cloning {'true|false}
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-files: move only kept cache entries in prune_cache()
prune_cache() first identifies those entries at the start of the sorted
array that can be discarded. Then it moves the rest of the entries up.
Last it identifies the unwanted trailing entries among the moved ones
and cuts them off.
Change the order: Identify both start *and* end of the range to keep
first and then move only those entries to the top. The resulting code
is slightly shorter and a bit more efficient.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Reviewed-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-files: pass prefix length explicitly to prune_cache()
The function prune_cache() relies on the fact that it is only called on
max_prefix and sneakily uses the matching global variable max_prefix_len
directly. Tighten its interface by passing both the string and its
length as parameters. While at it move the NULL check into the function
to collect all cache-pruning related logic in one place.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Reviewed-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'fr_v2.11.0_rnd1' of git://github.com/jnavila/git
* 'fr_v2.11.0_rnd1' of git://github.com/jnavila/git:
l10n: fr.po: v2.11-rc0 first round
l10n: fr.po: Fix a typo in the French translation
l10n: fr.po: Remove gender specific adjectives
l10n: fr.po: Fix typos
In a9e38359e3 we taught git-p4 a way to re-encode path names from what
was used in Perforce to UTF-8. This path re-encoding worked properly for
"added" paths. "Removed" paths were not re-encoded and therefore
different from the "added" paths. Consequently, these files were not
removed in a git-p4 cloned Git repository because the path names did not
match.
Fix this by moving the re-encoding to a place that affects "added" and
"removed" paths. Add a test to demonstrate the issue.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Reviewed-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use OpenSSL's SHA-1 routines rather than builtin block-sha1 routines.
This improves performance on SHA1 operations on Intel processors.
OpenSSL 1.0.2 has made considerable performance improvements and
support the Intel hardware acceleration features. See:
https://software.intel.com/en-us/articles/improving-openssl-performance
https://software.intel.com/en-us/articles/intel-sha-extensions
To test this I added/staged a single file in a gigantic
repository having a 450MB index file. The code in read-cache.c
verifies the header SHA as it reads the index and computes a new
header SHA as it writes out the new index. Therefore, in this test
the SHA code must process 900MB of data. Testing was done on an
Intel I7-4770 CPU @ 3.40GHz (Intel64, Family 6, Model 60) CPU.
The block-sha1 version averaged 5.27 seconds.
The OpenSSL version averaged 4.50 seconds.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: unify bottom "part of git suite" lines
We currently have 168 man pages that mention they are part of Git, you
can check yourself easily via:
$ git grep "Part of the linkgit:git\[1\] suite" |wc -l
168
However some have a trailing period, i.e.
$ git grep "Part of the linkgit:git\[1\] suite." |wc -l
8
Unify the bottom line in all man pages to not end with a period.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
push options: pass push options to the transport helper
When using non-builtin protocols relying on a transport helper
(such as http), push options are not propagated to the helper.
The user could ask for push options and a push would seemingly succeed,
but the push options would never be transported to the server,
misleading the users expectation.
Fix this by propagating the push options to the transport helper.
This is only addressing the first issue of
(1) the helper protocol does not propagate push-option
(2) the http helper is not prepared to handle push-option
Once we fix (2), the http transport helper can make use of push options
as well, but that happens as a follow up. (1) is a bug fix, whereas (2)
is a feature, which is why we only do (1) here.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git log --graph --name-only", the pathnames are
not indented to go along with their matching commits (unlike
all of the other diff formats). We need to output the line
prefix for each item before writing it.
The tests cover both --name-status and --name-only. The
former actually gets this right already, because it builds
on the --raw format functions. It's only --name-only which
uses its own code (and this fix mirrors the code in
diff_flush_raw()).
Note that the tests don't follow our usual style of setting
up the "expect" output inside the test block. This matches
the surrounding style, but more importantly it is easier to
read: we don't have to worry about embedded single-quotes,
and the leading indentation is more obvious.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the match member of the first pathspec item directly to
read_directory() instead of using common_prefix() to duplicate it first,
thus avoiding memory duplication, strlen(3) and free(3).
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the document patch for f0298cf1c6 (revision walker: include a
detached HEAD in --all - 2009-01-16).
Even though that commit is about detached HEAD, as Jeff pointed out,
always adding HEAD in that case may have subtle differences with
--source or --exclude. So the document mentions nothing about the
detached-ness.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "test_line_count" instead of "wc -l", use "git -C" instead of a
subshell, and use test_expect_code when calling difftool. Ease
debugging by capturing output into temporary files.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `verbose` and `expire` options of the `git worktree prune`
subcommand have wrong descriptions in that they pretend to relate to
objects. But as the git-worktree(1) correctly states, these options have
nothing to do with objects but only with worktrees. Fix the description
accordingly.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
p5302: create repositories for index-pack results explicitly
Before 7176a314 (index-pack: complain when --stdin is used outside of a
repo) index-pack silently created a non-existing target directory; now
the command refuses to work unless it's used against a valid repository.
That causes p5302 to fail, which relies on the former behavior. Fix it
by setting up the destinations for its performance tests using git init.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fatal: BUG: setup_git_env called without repository
Defer repository setup so that the help option processing happens before
the repository is initialized.
Add tests to ensure that the basic usage works inside and outside of a
repository.
Signed-off-by: David Aguilar <davvid@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reset: add an example of how to split a commit into two
It is often useful to break a commit into multiple parts that are more
logical separations. This can be tricky to learn how to do without the
brute-force method if re-writing code or commit messages from scratch.
Add a section to the git-reset documentation which shows an example
process for how to use git add -p and git commit -c HEAD@{1} to
interactively break a commit apart and re-use the original commit
message as a starting point when making the new commit message.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command completion only recognizes a subset of the available options for
the various git commands. The set of recognized options needs to balance
between having all useful options and to not clutter the terminal.
This commit adds all long-options that are mentioned in the man-page
synopsis of the respective git command. Possibly dangerous options are
not included in this set, to avoid accidental data loss. The added
options are:
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Helped-by: Johannes Sixt <j6t@kdbg.org> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: teach remote subcommands to complete options
Git-remote needs to complete remote names, its subcommands, and options
thereof. In addition to the existing subcommand and remote name
completion, do also complete the options
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-replace needs to complete references and its own options. In
addition to the existing references completions, do also complete the
options --edit --graft --format= --list --delete.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-remote needs to complete remote names and its own options. In
addition to the existing remote name completions, do also complete
the options --heads, --tags, --refs, --get-url, and --symref.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command completion for git-add did not recognize some long-options.
This commits adds completion for all long-options that are mentioned in
the man-page synopsis. In addition, if the user specified `--update` or
`-u`, path completion will only suggest modified tracked files.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Managing recorded resolutions requires command-line usage of git-rerere.
Added subcommand completion for rerere and path completion for its
subcommand forget.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: teach submodule subcommands to complete options
Each submodule subcommand has specific long-options. Therefore, teach
bash completion to support option completion based on the current
subcommand. All long-options that are mentioned in the man-page synopsis
are added.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "core.logAllRefUpdates" that used to be boolean has been
enhanced to take 'always' as well, to record ref updates to refs
other than the ones that are expected to be updated (i.e. branches,
remote-tracking branches and notes).
* cw/log-updates-for-all-refs-really:
doc: add note about ignoring '--no-create-reflog'
update-ref: add test cases for bare repository
refs: add option core.logAllRefUpdates = always
config: add markup to core.logAllRefUpdates doc
"uchar [40]" to "struct object_id" conversion continues.
* rs/object-id:
checkout: convert post_checkout_hook() to struct object_id
use oidcpy() for copying hashes between instances of struct object_id
use oid_to_hex_r() for converting struct object_id hashes to hex strings
"make -C t failed" will now run only the tests that failed in the
previous run. This is usable only when prove is not use, and gives
a useless error message when run after "make clean", but otherwise
is serviceable.
* js/re-running-failed-tests:
t/Makefile: add a rule to re-run previously-failed tests