"git shortlog cruft" aborted with a BUG message when run outside a
Git repository. The command has been taught to complain about
extra and unwanted arguments on its command line instead in such a
case.
The build procedure learned to optionally use symbolic links
(instead of hardlinks and copies) to install "git-foo" for built-in
commands, whose binaries are all identical.
* ab/install-symlinks:
Makefile: optionally symlink libexec/git-core binaries to bin/git
Makefile: add a gitexecdir_relative variable
Makefile: fix broken bindir_relative variable
Merge branch 'ml/filter-branch-no-op-error' into next
"git filter-branch" learned to use a different exit code to allow
the callers to tell the case where there was no new commits to
rewrite from other error cases.
* ml/filter-branch-no-op-error:
filter-branch: return 2 when nothing to rewrite
Merge branch 'jt/transfer-fsck-with-promissor' into next
The transfer.fsckobjects configuration tells "git fetch" to
validate the data and connected-ness of objects in the received
pack; the code to perform this check has been taught about the
narrow clone's convention that missing objects that are reachable
from objects in a pack that came from a promissor remote is OK.
* jt/transfer-fsck-with-promissor:
fetch-pack: do not check links for partial fetch
index-pack: support checking objects but not links
Git can be built to use either v1 or v2 of the PCRE library, and so
far, the build-time configuration USE_LIBPCRE=YesPlease instructed
the build procedure to use v1, but now it means v2. USE_LIBPCRE1
and USE_LIBPCRE2 can be used to explicitly choose which version to
use, as before.
* ab/pcre-v2:
Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1
configure: detect redundant --with-libpcre & --with-libpcre1
configure: fix a regression in PCRE v1 detection
Merge branch 'ti/fetch-everything-local-optim' into next
A "git fetch" from a repository with insane number of refs into a
repository that is already up-to-date still wasted too many cycles
making many lstat(2) calls to see if these objects at the tips
exist as loose objects locally. These lstat(2) calls are optimized
away by enumerating all loose objects beforehand.
It is unknown if the new strategy negatively affects existing use
cases, fetching into a repository with many loose objects from a
repository with small number of refs.
* ti/fetch-everything-local-optim:
fetch-pack.c: use oidset to check existence of loose object
Merge branch 'nd/remove-ignore-env-field' into next
Code clean-up for the "repository" abstraction.
* nd/remove-ignore-env-field:
repository: delete ignore_env member
sha1_file.c: move delayed getenv(altdb) back to setup_git_env()
repository.c: delete dead functions
repository.c: move env-related setup code back to environment.c
repository: initialize the_repository in main()
"git rebase" learned "--recreate-merges" to transplant the whole
topology of commit graph elsewhere.
* js/rebase-recreate-merge:
rebase -i: introduce --recreate-merges=[no-]rebase-cousins
pull: accept --rebase=recreate to recreate the branch topology
sequencer: handle post-rewrite for merge commands
sequencer: make refs generated by the `label` command worktree-local
rebase: introduce the --recreate-merges option
rebase-helper --make-script: introduce a flag to recreate merges
sequencer: fast-forward merge commits, if possible
sequencer: introduce the `merge` command
sequencer: introduce new commands to reset the revision
git-rebase--interactive: clarify arguments
sequencer: make rearrange_squash() a bit more obvious
sequencer: avoid using errno clobbered by rollback_lock_file()
Merge branch 'ma/config-page-only-in-list-mode' into next
In a way similar to how "git tag" learned to honor the pager
setting only in the list mode, "git config" learned to ignore the
pager setting when it is used for setting values (i.e. when the
purpose of the operation is not to "show").
* ma/config-page-only-in-list-mode:
config: change default of `pager.config` to "on"
config: respect `pager.config` in list/get-mode only
t7006: add tests for how git config paginates
* sg/cvs-tests-with-x:
t9402-git-cvsserver-refs: don't check the stderr of a subshell
t9400-git-cvsserver-server: don't rely on the output of 'test_cmp'
* ab/perl-fixes:
perl Git::LoadCPAN: emit better errors under NO_PERL_CPAN_FALLBACKS
Makefile: add NO_PERL_CPAN_FALLBACKS knob
perl: move the perl/Git/FromCPAN tree to perl/FromCPAN
perl: generalize the Git::LoadCPAN facility
perl: move CPAN loader wrappers to another namespace
perl: update our copy of Mail::Address
perl: update our ancient copy of Error.pm
git-send-email: unconditionally use Net::{SMTP,Domain}
Git.pm: hard-depend on the File::{Temp,Spec} modules
gitweb: hard-depend on the Digest::MD5 5.8 module
Git.pm: add the "use warnings" pragma
Git.pm: remove redundant "use strict" from sub-package
perl: *.pm files should not have the executable bit
Makefile: optionally symlink libexec/git-core binaries to bin/git
Add a INSTALL_SYMLINKS option which if enabled, changes the default
hardlink installation method to one where the relevant binaries in
libexec/git-core are symlinked back to ../../bin, instead of being
hardlinked.
This new option also overrides the behavior of the existing
NO_*_HARDLINKS variables which in some cases would produce symlinks
within to libexec/, e.g. "git-add" symlinked to "git" which would be
copy of the "git" found in bin/, now "git-add" in libexec/ is always
going to be symlinked to the "git" found in the bin/ directory.
This option is being added because:
1) I think it makes what we're doing a lot more obvious. E.g. I'd
never noticed that the libexec binaries were really just hardlinks
since e.g. ls(1) won't show that in any obvious way. You need to
start stat(1)-ing things and look at the inodes to see what's
going on.
2) Some tools have very crappy support for hardlinks, e.g. the Git
shipped with GitLab is much bigger than it should be because
they're using a chef module that doesn't know about hardlinks, see
https://github.com/chef/omnibus/issues/827
I've also ran into other related issues that I think are explained
by this, e.g. compiling git with debugging and rpm refusing to
install a ~200MB git package with 2GB left on the FS, I think that
was because it doesn't consider hardlinks, just the sum of the
byte size of everything in the package.
As for the implementation, the "../../bin" noted above will vary given
some given some values of "../.." and "bin" depending on the depth of
the gitexecdir relative to the destdir, and the "bindir" target,
e.g. setting "bindir=/tmp/git/binaries gitexecdir=foo/bar/baz" will do
the right thing and produce this result:
$ file /tmp/git/foo/bar/baz/git-add
/tmp/git/foo/bar/baz/git-add: symbolic link to ../../../binaries/git
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable will be e.g. "libexec/git-core" if
gitexecdir=/tmp/git/libexec/git-core is given. It'll be used by a
subsequent change.
This is stolen from the yet-to-be integrated (needs resubmission)
"Makefile: add Perl runtime prefix support" patch on the mailing
list. See
<20180108030239.92036-3-dnj@google.com> (https://public-inbox.org/git/20180108030239.92036-3-dnj@google.com/).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the bindir_relative variable to work like the other *_relative
variables, which are computed as a function of the absolute
path. Before this change, supplying e.g. bindir=/tmp/git/binaries to
the Makefile would yield a bindir_relative of just "bin", as opposed
to "binaries".
This logic was originally added back in 026fa0d5ad ("Move computation
of absolute paths from Makefile to runtime (in preparation for
RUNTIME_PREFIX)", 2009-01-18), then later in 971f85388f ("Makefile:
make mandir, htmldir and infodir absolute", 2013-02-24) when
more *_relative variables were added those new variables didn't have
this bug, but bindir_relative was never fixed.
There is a small change in behavior here, which is that setting
bindir_relative as an argument to the Makefile won't work anymore, I
think that's fine, since this was always intended as an internal
variable (e.g. INSTALL documents bindir=*, not bindir_relative=*).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the --state-branch option allows us to perform incremental filtering.
This may lead to having nothing to rewrite in subsequent filtering, so we need
a way to recognize this case.
So, let's exit with 2 instead of 1 when this "error" occurs.
Signed-off-by: Michele Locati <michele@locati.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are outside a repo and have any arguments left after
option-parsing, `setup_revisions()` will try to do its job and
something like this will happen:
The usage is wrong, but we could obviously handle this better. Note that
commit abe549e179 (shortlog: do not require to run from inside a git
repository, 2008-03-14) explicitly enabled `git shortlog` to run from
outside a repo, since we do not need a repo for parsing data from stdin.
Disallow left-over arguments when run from outside a repo.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a partial clone or fetch with transfer.fsckobjects=1, use the
--fsck-objects instead of the --strict flag when invoking index-pack so
that links are not checked, only objects. This is because incomplete
links are expected when doing a partial clone or fetch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: support checking objects but not links
The index-pack command currently supports the
--check-self-contained-and-connected argument, for internal use only,
that instructs it to only check for broken links and not broken objects.
For partial clones, we need the inverse, so add a --fsck-objects
argument that checks for broken objects and not broken links, also for
internal use only.
This will be used by fetch-pack in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1
Change the USE_LIBPCRE flag from being an alias for USE_LIBPCRE1 to
being an alias for USE_LIBPCRE2.
When support for v2 was added in my 94da9193a6 ("grep: add support for
PCRE v2", 2017-06-01) the existing USE_LIBPCRE flag was left as
meaning v1, with a note that this would likely change in a future
release. That optional support for v2 first made it into Git version
2.14.0.
The PCRE v2 support has been shown to be stable, and the upstream PCRE
project is highly encouraging downstream users to move to v2, so it
makes sense to give packagers of Git who haven't heard the news about
PCRE v2 a further nudge to move to v2.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the check for PCRE v1 to disable the --with-libpcre1 option if
the pcre_version() function can't be found in the pcre library. I
unintentionally changed this in my 94da9193a6 ("grep: add support for
PCRE v2", 2017-06-01) while renaming moving some variables.
The intent of this check ever since it was added in a119f91e57 ("configure: Check for libpcre", 2011-05-09) is to
second-guess the user and turn off an explicitly provided
--with-libpcre if the library can't be found.
I don't think that behavior makes any sense, we shouldn't be
second-guessing the user with an auto-detection, but changing that
needs a bigger refactoring of this script, and only has marginal
benefits. So let's fix it to work as it was intended to work again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach parse-options API an option to help the completion script,
and make use of the mechanism in command line completion.
* nd/parseopt-completion: (45 commits)
completion: more subcommands in _git_notes()
completion: complete --{reuse,reedit}-message= for all notes subcmds
completion: simplify _git_notes
completion: don't set PARSE_OPT_NOCOMPLETE on --rerere-autoupdate
completion: use __gitcomp_builtin in _git_worktree
completion: use __gitcomp_builtin in _git_tag
completion: use __gitcomp_builtin in _git_status
completion: use __gitcomp_builtin in _git_show_branch
completion: use __gitcomp_builtin in _git_rm
completion: use __gitcomp_builtin in _git_revert
completion: use __gitcomp_builtin in _git_reset
completion: use __gitcomp_builtin in _git_replace
remote: force completing --mirror= instead of --mirror
completion: use __gitcomp_builtin in _git_remote
completion: use __gitcomp_builtin in _git_push
completion: use __gitcomp_builtin in _git_pull
completion: use __gitcomp_builtin in _git_notes
completion: use __gitcomp_builtin in _git_name_rev
completion: use __gitcomp_builtin in _git_mv
completion: use __gitcomp_builtin in _git_merge_base
...
The "interactive.diffFilter" used by "git add -i" must retain
one-to-one correspondence between its input and output, but it was
not enforced and caused end-user confusion. We now at least make
sure the filtered result has the same number of lines as its input
to detect a broken filter.
* jk/add-i-diff-filter:
add--interactive: detect bogus diffFilter output
t3701: add a test for interactive.diffFilter
"git worktree" learned move and remove subcommands.
* nd/worktree-move:
t2028: fix minor error and issues in newly-added "worktree move" tests
worktree remove: allow it when $GIT_WORK_TREE is already gone
worktree remove: new command
worktree move: refuse to move worktrees with submodules
worktree move: accept destination as directory
worktree move: new command
worktree.c: add update_worktree_location()
worktree.c: add validate_worktree()
"git add -p" has been lazy in coalescing split patches before
passing the result to underlying "git apply", leading to corner
case bugs; the logic to prepare the patch to be applied after hunk
selections has been tightened.
* pw/add-p-recount:
add -p: don't rely on apply's '--recount' option
add -p: fix counting when splitting and coalescing
add -p: calculate offset delta for edited patches
add -p: adjust offsets of subsequent hunks when one is skipped
t3701: add failing test for pathological context lines
t3701: don't hard code sha1 hash values
t3701: use test_write_lines and write_script
t3701: indent here documents
add -i: add function to format hunk header
A sample auto-gc hook (in contrib/) to skip auto-gc while on
battery has been updated to almost always allow running auto-gc
unless on_ac_power command is absolutely sure that we are on
battery power (earlier, it skipped unless the command is sure that
we are on ac power).
* ab/pre-auto-gc-battery:
hooks/pre-auto-gc-battery: allow gc to run on non-laptops
Running test scripts under -x option of the shell is often not a
useful way to debug them, because the error messages from the
commands tests try to capture and inspect are contaminated by the
tracing output by the shell. An earlier work done to make it more
pleasant to run tests under -x with recent versions of bash is
extended to cover posix shells that do not support BASH_XTRACEFD.
* sg/test-x:
travis-ci: run tests with '-x' tracing
t/README: add a note about don't saving stderr of compound commands
t1510-repo-setup: mark as untraceable with '-x'
t9903-bash-prompt: don't check the stderr of __git_ps1()
t5570-git-daemon: don't check the stderr of a subshell
t5526: use $TRASH_DIRECTORY to specify the path of GIT_TRACE log file
t5500-fetch-pack: don't check the stderr of a subshell
t3030-merge-recursive: don't check the stderr of a subshell
t1507-rev-parse-upstream: don't check the stderr of a shell function
t: add means to disable '-x' tracing for individual test scripts
t: prevent '-x' tracing from interfering with test helpers' stderr
Some codepaths used to take a lockfile and did not roll it back;
they are automatically rolled back at program exit, so there is no
real "breakage", but it still is a good practice to roll back when
you are done with a lockfile.
* ma/roll-back-lockfiles:
sequencer: do not roll back lockfile unnecessarily
merge: always roll back lock in `checkout_fast_forward()`
merge-recursive: always roll back lock in `merge_recursive_generic()`
sequencer: always roll back lock in `do_recursive_merge()`
sequencer: make lockfiles non-static
"git diff" and friends learned "--compact-summary" that shows the
information usually given with the "--summary" option on the same
line as the diffstat output of the "--stat" option (which saves
vertical space and keeps info on a single path at the same place).
* nd/diff-stat-with-summary:
diff: add --compact-summary
diff.c: refactor pprint_rename() to use strbuf
fetch-pack.c: use oidset to check existence of loose object
When fetching from a repository with large number of refs, because to
check existence of each refs in local repository to packed and loose
objects, 'git fetch' ends up doing a lot of lstat(2) to non-existing
loose form, which makes it slow.
Instead of making as many lstat(2) calls as the refs the remote side
advertised to see if these objects exist in the loose form, first
enumerate all the existing loose objects in hashmap beforehand and use
it to check existence of them if the number of refs is larger than the
number of loose objects.
With this patch, the number of lstat(2) calls in `git fetch` is reduced
from 411412 to 13794 for chromium repository, it has more than 480000
remote refs.
I took time stat of `git fetch` when fetch-pack happens for chromium
repository 3 times on linux with SSD.
* with this patch
8.105s
8.309s
7.640s
avg: 8.018s
* master
12.287s
11.175s
12.227s
avg: 11.896s
On my MacBook Air which has slower lstat(2).
* with this patch
14.501s
* master
1m16.027s
`git fetch` on slow disk will be improved largely.
Signed-off-by: Takuto Ikuta <tikuta@chromium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-blame.el mode has been superseded by Emacs's own
vc-annotate (invoked by C-x v g). Users of the git.el mode are now
much better off using either Magit or the Git backend for Emacs's own
VC mode.
These modes were added over 10 years ago when Emacs's own Git support
was much less mature, and there weren't other mature modes in the wild
or shipped with Emacs itself.
These days these modes have few if any users, and users of git aren't
well served by us shipping these (some OS's install them alongside git
by default, which is confusing and leads users astray).
So let's remove these per Alexandre Julliard's message to the
ML[1]. If someone still wants these for some reason they're better
served by hosting these elsewhere (e.g. on ELPA), instead of us
distributing them with git.
This has been missing since we learned to print usage, way back in 4e27fb06f (add commit count options to git-shortlog, 2006-10-06).
While at it, drop the [] around "<path>...". This matches `git log -h`
and Documentation/git-{short}log.txt. It formally makes it look like we
do not allow `git shortlog --`, but we gain readability and consistency.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first usage we give is the original one where, e.g., `git log` is
piped through `git shortlog`. The description that follows reads the
other way round, by first focusing on the general behavior, then ending
with the behavior when reading from stdin.
It is also a tiny bit odd that what is probably the most common usage
and the one a reader is probably looking for is not at the top of the
list. Of course, it is only a two-item list, so it is not _that_ hard to
find... The next commit will add the original usage to the usage string
in builtin/shortlog.c, and it feels more natural to do so below the
most common usage. To avoid being inconsistent, reorder these two
usages here first.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for the OBJECT_INFO_QUICK flag in sha1_object_info_extended()
was added in commit dfdd4afcf9 ("sha1_file: teach
sha1_object_info_extended more flags", 2017-06-26) in order to support
commit e83e71c5e1 ("sha1_file: refactor has_sha1_file_with_flags",
2017-06-26), but it was inadvertently removed in commit 8b4c0103a9
("sha1_file: support lazily fetching missing objects", 2017-12-08).
Restore this functionality.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sg/cvs-tests-with-x:
t9402-git-cvsserver-refs: don't check the stderr of a subshell
t9400-git-cvsserver-server: don't rely on the output of 'test_cmp'
* ab/perl-fixes:
perl Git::LoadCPAN: emit better errors under NO_PERL_CPAN_FALLBACKS
Makefile: add NO_PERL_CPAN_FALLBACKS knob
perl: move the perl/Git/FromCPAN tree to perl/FromCPAN
perl: generalize the Git::LoadCPAN facility
perl: move CPAN loader wrappers to another namespace
perl: update our copy of Mail::Address
perl: update our ancient copy of Error.pm
git-send-email: unconditionally use Net::{SMTP,Domain}
Git.pm: hard-depend on the File::{Temp,Spec} modules
gitweb: hard-depend on the Digest::MD5 5.8 module
Git.pm: add the "use warnings" pragma
Git.pm: remove redundant "use strict" from sub-package
perl: *.pm files should not have the executable bit
t9402-git-cvsserver-refs: don't check the stderr of a subshell
Four 'cvs diff' related tests in 't9402-git-cvsserver-refs.sh' fail
when the test script is run with '-x' tracing (and using a shell other
than a Bash version supporting BASH_XTRACEFD). The reason for those
failures is that the tests check the emptiness of a subshell's stderr,
which includes the trace of commands executed in that subshell as
well, throwing off the emptiness check.
Save the stdout and stderr of the invoked 'cvs' command instead of the
whole subshell, so the latter remains free from tracing output. (Note
that changing how stdout is saved is only done for the sake of
consistency, it's not necessary for correctness.)
After this change t9402 passes with '-x', even when running with
/bin/sh.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9400-git-cvsserver-server: don't rely on the output of 'test_cmp'
The test 'cvs update (-p)' redirects and checks 'test_cmp's stdout and
even its stderr. The commit introducing this test in 6e8937a084
(cvsserver: Add test for update -p, 2008-03-27) doesn't discuss why,
in fact its log message only consists of that subject line. Anyway,
weird as it is, it kind of made sense due to the way that test was
structured:
After a bit of preparation, this test updates four files via CVS and
checks their contents using 'test_cmp', but it does so in a for loop
iterating over the names of those four files. Now, the exit status of
a for loop is the exit status of the last command executed in the
loop, meaning that the test can't simply rely on the exit code of
'test_cmp' in the loop's body. Instead, the test works it around by
relying on the stdout of 'test_cmp' being silent on success and
showing the diff on failure, as it appends the stdout of all four
'test_cmp' invocations to a single file and checks that file's
emptiness after the loop (with 'test -z "$(cat ...)"', no less; there
was no 'test_must_be_empty' back then). Furthermore, the test
redirects the stderr of those 'test_cmp' invocations to this file,
too: while 'test_cmp' itself doesn't output anything to stderr, the
invoked 'diff' or 'cmp' commands do send their error messages there,
e.g. if they can't open a file because its name was misspelled.
This also makes this test fail when the test script is run with '-x'
tracing (and using a shell other than a Bash version supporting
BASH_XTRACEFD), because 'test_cmp's stderr contains the trace of the
'diff' command executed inside the helper function, throwing off the
subsequent emptiness check.
Stop relying on 'test_cmp's output and instead run 'test_cmp a b ||
return 1' in the for loop in order to make 'test_cmp's error code fail
the test. Furthermore, add the missing && after the cvs command to
create a && chain in the loop's body.
After this change t9400 passes with '-x', even when running with
/bin/sh.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "interactive.diffFilter" used by "git add -i" must retain
one-to-one correspondence between its input and output, but it was
not enforced and caused end-user confusion. We now at least make
sure the filtered result has the same number of lines as its input
to detect a broken filter.
* jk/add-i-diff-filter:
add--interactive: detect bogus diffFilter output
t3701: add a test for interactive.diffFilter
Teach parse-options API an option to help the completion script,
and make use of the mechanism in command line completion.
* nd/parseopt-completion:
completion: more subcommands in _git_notes()
completion: complete --{reuse,reedit}-message= for all notes subcmds
completion: simplify _git_notes
completion: don't set PARSE_OPT_NOCOMPLETE on --rerere-autoupdate
Writing out the index file when the only thing that changed in it
is the untracked cache information is often wasteful, and this has
been optimized out.
* bp/untracked-cache-noflush:
untracked cache: use git_env_bool() not getenv() for customization
dir.c: don't flag the index as dirty for changes to the untracked cache
"git status" can spend a lot of cycles to compute the relation
between the current branch and its upstream, which can now be
disabled with "--no-ahead-behind" option.
* jh/status-no-ahead-behind:
status: support --no-ahead-behind in long format
status: update short status to respect --no-ahead-behind
status: add --[no-]ahead-behind to status and commit for V2 format.
stat_tracking_info: return +1 when branches not equal
Build the executable in 'script' phase in Travis CI integration, to
follow the established practice, rather than during 'before_script'
phase. This allows the CI categorize the failures better ('failed'
is project's fault, 'errored' is build environment's).
* sg/travis-build-during-script-phase:
travis-ci: build Git during the 'script' phase
Add a mention of the security mailing list to the "Reporting Bugs"
section. There's a mention of this list at
https://git-scm.com/community but none in git.git itself.
The copy is pasted from the git-scm.com website. Let's use the same
wording in both places.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently C# async methods are not shown in diff hunk headers. I just
added the async keyword to the csharp method pattern so that they are
properly detected.
Signed-off-by: Thomas Levesque <thomas.levesque@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two subcommands are added for completion: merge and get-ref. get-ref
is more like plumbing. But since it does not share the prefix with any
other subcommands, it won't slow anybody down.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: complete --{reuse,reedit}-message= for all notes subcmds
The new subcommand that takes these options is 'git notes edit'. Just
accept the options from subcommands since we handle them the same way
in builtin/notes.c anyway. If a user does
git prune --reuse-message=...
just let the command catches that error when it's executed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: don't set PARSE_OPT_NOCOMPLETE on --rerere-autoupdate
There is not a strong reason to hide this option, and git-merge already
completes this one. Let's allow to complete this for all commands (and
let git-completion.bash do the suppressing if needed).
This makes --rerere-autoupdate completable for am, cherry-pick and
revert. rebase completion is fixed manually because it's a shell
script and does not benefit from --git-completion-helper.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" has been lazy in coalescing split patches before
passing the result to underlying "git apply", leading to corner
case bugs; the logic to prepare the patch to be applied after hunk
selections has been tightened.
* pw/add-p-recount:
add -p: don't rely on apply's '--recount' option
add -p: fix counting when splitting and coalescing
add -p: calculate offset delta for edited patches
add -p: adjust offsets of subsequent hunks when one is skipped
t3701: add failing test for pathological context lines
t3701: don't hard code sha1 hash values
t3701: use test_write_lines and write_script
t3701: indent here documents
add -i: add function to format hunk header
A sample auto-gc hook (in contrib/) to skip auto-gc while on
battery has been updated to almost always allow running auto-gc
unless on_ac_power command is absolutely sure that we are on
battery power (earlier, it skipped unless the command is sure that
we are on ac power).
* ab/pre-auto-gc-battery:
hooks/pre-auto-gc-battery: allow gc to run on non-laptops
Running test scripts under -x option of the shell is often not a
useful way to debug them, because the error messages from the
commands tests try to capture and inspect are contaminated by the
tracing output by the shell. An earlier work done to make it more
pleasant to run tests under -x with recent versions of bash is
extended to cover posix shells that do not support BASH_XTRACEFD.
* sg/test-x:
travis-ci: run tests with '-x' tracing
t/README: add a note about don't saving stderr of compound commands
t1510-repo-setup: mark as untraceable with '-x'
t9903-bash-prompt: don't check the stderr of __git_ps1()
t5570-git-daemon: don't check the stderr of a subshell
t5526: use $TRASH_DIRECTORY to specify the path of GIT_TRACE log file
t5500-fetch-pack: don't check the stderr of a subshell
t3030-merge-recursive: don't check the stderr of a subshell
t1507-rev-parse-upstream: don't check the stderr of a shell function
t: add means to disable '-x' tracing for individual test scripts
t: prevent '-x' tracing from interfering with test helpers' stderr
Some codepaths used to take a lockfile and did not roll it back;
they are automatically rolled back at program exit, so there is no
real "breakage", but it still is a good practice to roll back when
you are done with a lockfile.
* ma/roll-back-lockfiles:
sequencer: do not roll back lockfile unnecessarily
merge: always roll back lock in `checkout_fast_forward()`
merge-recursive: always roll back lock in `merge_recursive_generic()`
sequencer: always roll back lock in `do_recursive_merge()`
sequencer: make lockfiles non-static
Merge branch 'en/rename-directory-detection' into next
Rename detection logic in "diff" family that is used in "merge" has
learned to guess when all of x/a, x/b and x/c have moved to z/a,
z/b and z/c, it is likely that x/d added in the meantime would also
want to move to z/d by taking the hint that the entire directory
'x' moved to 'z'. A bug causing dirty files involved in a rename
to be overwritten during merge has also been fixed as part of this
work.
* en/rename-directory-detection: (29 commits)
merge-recursive: ensure we write updates for directory-renamed file
merge-recursive: avoid spurious rename/rename conflict from dir renames
directory rename detection: new testcases showcasing a pair of bugs
merge-recursive: fix remaining directory rename + dirty overwrite cases
merge-recursive: fix overwriting dirty files involved in renames
merge-recursive: avoid clobbering untracked files with directory renames
merge-recursive: apply necessary modifications for directory renames
merge-recursive: when comparing files, don't include trees
merge-recursive: check for file level conflicts then get new name
merge-recursive: add computation of collisions due to dir rename & merging
merge-recursive: check for directory level conflicts
merge-recursive: add get_directory_renames()
merge-recursive: make a helper function for cleanup for handle_renames
merge-recursive: split out code for determining diff_filepairs
merge-recursive: make !o->detect_rename codepath more obvious
merge-recursive: fix leaks of allocated renames and diff_filepairs
merge-recursive: introduce new functions to handle rename logic
merge-recursive: move the get_renames() function
directory rename detection: tests for handling overwriting dirty files
directory rename detection: tests for handling overwriting untracked files
...
Merge branch 'nd/diff-stat-with-summary' into next
"git diff" and friends learned "--compact-summary" that shows the
information usually given with the "--summary" option on the same
line as the diffstat output of the "--stat" option (which saves
vertical space and keeps info on a single path at the same place).
* nd/diff-stat-with-summary:
diff: add --compact-summary
diff.c: refactor pprint_rename() to use strbuf