send-pack: do not send out single-level refs such as refs/stash
Since no version of receive-pack accepts these "funny refs", we should
mirror the check when considering the list of refs to send. IOW, don't
even make them eligible for matching or mirroring.
The comments for normalize_absolute_path explicitly claim
that the source and destination buffers may be the same
(though they may not otherwise overlap). Thus the call to
memcpy may involve copying overlapping data, and memmove
should be used instead.
This fixes a valgrind error in t1504.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
struct object_entry *entry = *list++;
...
if (!*list_size)
...
break
Because we look at and increment *list _before_ the check of
list_size, in the very last iteration of the loop we will
look at uninitialized data, and increment the pointer beyond
one past the end of the allocated space. Since we don't
actually do anything with the data until after the check,
this is not a problem in practice.
But since it technically violates the C standard, and
because it provokes a spurious valgrind warning, let's just
move the initialization of entry to a safe place.
This fixes valgrind errors in t5300, t5301, t5302, t303, and
t9400.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most cache_entry structs are allocated by using the
cache_entry_size macro, which rounds the size of the struct
up to the nearest multiple of 8 bytes (presumably to avoid
memory fragmentation).
There is one exception: the special "conflict entry" is
allocated with an empty name, and so is explicitly given
just one extra byte to hold the NUL.
However, later code doesn't realize that this particular
struct has been allocated differently, and happily tries
reading and copying it based on the ce_size macro, which
assumes the 8-byte alignment.
This can lead to reading uninitalized data, though since
that data is simply padding, there shouldn't be any problem
as a result. Still, it makes sense to hold the padding
assumption so as not to surprise later maintainers.
This fixes valgrind errors in t1005, t3030, t4002, and
t4114.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui: (27 commits)
git-gui: Update German translation.
git-gui: Do not munge conflict marker lines in a normal diff
git-gui: Add a simple implementation of SSH_ASKPASS.
git-gui: Add a dialog that shows the OpenSSH public key.
git-gui: Mark-up strings in show_{other,unmerged}_diff() for localization
git-gui: Show a round number of bytes of large untracked text files
git-gui: Fix the blame viewer destroy handler.
git-gui: Add a search command to the blame viewer.
git-gui: Fix the blame window shape.
git-gui: Fix switch statement in lib/merge.tcl
git-gui: Fix fetching from remotes when adding them
git-gui: Fix removing non-pushable remotes
git-gui: Make input boxes in init/clone/open dialogs consistent
git-gui: Avoid using the term URL when specifying repositories
git-gui: gui.autoexplore makes explorer to pop up automatically after picking
git-gui: Add Explore Working Copy to the Repository menu
git-gui: Use git web--browser for web browsing
git-gui: mkdir -p when initializing new remote repository
git-gui: Add support for removing remotes
git-gui: Add support for adding remotes
...
git-gui: Do not munge conflict marker lines in a normal diff
Previously, conflict markers were highlighted in two ways: (1) They
received a distinguishing color; and (2) they had the '+' removed at the
beginning of the line. However, by doing (2), a hunk that contained
conflict markers could not be staged or unstaged because the resulting
patch was corrupted. With this change we no longer modify the diff text
of a 2-way diff, so that "Stage Hunk" and friends work.
Note that 3-way diff of a conflicted file is unaffected by this change,
and '++' before conflict markers is still removed. But this has no negative
impact because in this mode staging hunks or lines is disabled anyway.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Add a simple implementation of SSH_ASKPASS.
OpenSSH allows specifying an external program to use
for direct user interaction. While most Linux systems
already have such programs, some environments, for
instance, msysgit, lack it. This patch adds a simple
fallback Tcl implementation of the tool.
In msysgit it is also necessary to set a fake value of
the DISPLAY variable, because otherwise ssh won't even
try to use SSH_ASKPASS handlers.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Acked-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Add a dialog that shows the OpenSSH public key.
Generating a new SSH key or finding an existing one may
be a difficult task for non-technical users, especially
on Windows.
This commit adds a new dialog that shows the public key,
or allows the user to generate a new one if none were found.
Since this is a convenience/informational feature for new
users, and the dialog is mostly read-only, it is located
in the Help menu.
The command line used to invoke ssh-keygen is designed to
force it to use SSH_ASKPASS if available, or accept empty
passphrases, but _never_ wait for user response on the tty.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Acked-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
update-ref --no-deref -d: handle the case when the pointed ref is packed
In this case we did nothing in the past, but we should delete the
reference in fact.
The problem was that when the symref is not packed but the referenced
ref is packed, then we assumed that the symref is packed as well, but
symrefs are never packed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-svn: change dashed git-commit-tree to git commit-tree
Documentation: clarify information about 'ident' attribute
bash completion: add doubledash to "git show"
Use test-chmtime -v instead of perl in t5000 to get mtime of a file
Add --verbose|-v to test-chmtime
asciidoc: add minor workaround to add an empty line after code blocks
Plug a memleak in builtin-revert
Add file delete/create info when we overflow rename_limit
Install git-cvsserver in $(bindir)
Install git-shell in bindir, too
Documentation: clarify information about 'ident' attribute
The documentation spoke of the attribute being set "to" a path; this can
mistakenly be interpreted as "the attribute needs to have its value set to
some kind of path". This clarifies things.
Signed-off-by: Jan Krüger <jk@jk.gs> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us replace perl when getting the mtime of a file because
of time zone conversions, though at the moment only one platform which
does this has been identified: Cygwin when used with ActiveState Perl
(as usual).
asciidoc: add minor workaround to add an empty line after code blocks
Insert an empty <simpara> in manpages after code blocks to force and
empty line.
The problem can be seen on the manpage for the git tutorial, where an
example command and the following paragraph is printed with no empty
line between them:
First, note that you can get documentation for a command such as git
log --graph with:
$ man git-log
It is a good idea to introduce yourself to git [...]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/maint-mksnpath:
Use git_pathdup instead of xstrdup(git_path(...))
git_pathdup: returns xstrdup-ed copy of the formatted path
Fix potentially dangerous use of git_path in ref.c
Add git_snpath: a .git path formatting routine with output buffer
Add git_snpath: a .git path formatting routine with output buffer
The function's purpose is to replace git_path where the buffer of
formatted path may not be reused by subsequent calls of the function
or will be copied anyway.
compat/cygwin.c: make runtime detection of lstat/stat lessor impact
The original patch that lead to an earlier commit adbc0b6 (cygwin: Use
native Win32 API for stat, 2008-09-30) did not call git_default_config()
and it was a good thing. The lazy config reading when lstat/stat is
called for the first time to find out if core.filemode is set can happen
anytime in the calling program. If it happens after the calling program
parsed the configuration file to prime its default parameter settings and
processed its command line parameters to tweak them, this will overwrite
the values set by the program with the values read from the config file.
This essentially reverts the code to the version as submitted by Mark,
with a bit more comments to clarify why we do not fall back on the default
configuration parser from git_cygwin_config().
Add file delete/create info when we overflow rename_limit
When we refuse to do rename detection due to having too many files
created or deleted, let the user know the numbers. That way there is a
reasonable starting point for setting the diff.renamelimit option.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
/etc/passwd shell field must be something execable, you can't enter
"/usr/bin/git shell" there. git-shell must be present as a separate
executable, or it is useless.
Signed-off-by: Tommi Virtanen <tv@eagain.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitk: Make the background color of marked lines configurable
This makes it possible for the user to configure the background color
of lines that are "marked". At the moment only the "show the origin
of this line" function marks lines. This also makes the user's choice
persistent by saving it in ~/.gitk.
gitk: Add a menu item to show where a given line comes from
This adds a menu item to the pop-up menu for the diff display window
which makes gitk find which commit added the line (via git blame)
and show that commit, with the line highlighted with a light-blue
background.
gitk: Fix some off-by-one errors in computing which line to blame
When walking back from the line where a right-click happened to the
previous hunk separator line to calculate the line number to work on,
we were counting every line including the one clicked on. That isn't
right; if the user clicked on the line immediately after the hunk
separator then the correct line number would be the one from the
hunk separator. Therefore this looks at the clicked-on line to work
out which parent to blame (or whether to blame the current commit),
and then looks only at the preceding lines to work out the offset from
the line number in the hunk separator.
This also fixes an off-by-one error when we are showing files rather
than diffs. In this case diff_menu_filebase is the line number of
the banner showing the file name, so the first line of the file is
at line $diff_menu_filebase + 1.
This also simplifies the code in find_hunk_blamespec a bit and arranges
that we don't pop up the context menu if the user clicks on a file
separator line or a hunk separator line.
* ar/maint-mksnpath:
Fix potentially dangerous uses of mkpath and git_path
Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c
Add mksnpath which allows you to specify the output buffer
Add mksnpath which allows you to specify the output buffer
This is just vsnprintf's but additionally calls cleanup_path() on the
result. To be used as alternatives to mkpath() where the buffer for the
created path may not be reused by subsequent calls of the same formatting
function.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current 'git add -p' will say "No changes." if there are no changes to
text files, which can be confusing if there _are_ changes to binary
files. Add some code to distinguish the two cases, and give a
different message in the latter one.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the call to git_config to a place where it doesn't break the
logic for using git archive in a bare repository but retains the fix to
make git archive respect core.autocrlf.
Tests are by René Scharfe.
Signed-off-by: Charles Bailey <charles@hashpling.org> Tested-by: Deskin Miller <deskinm@umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This had two problems with symrefs. First, it copied the actual sha1
instead of the "pointer", second it failed to remove the old ref after a
successful rename.
Given that till now delete_ref() always dereferenced symrefs, a new
parameters has been introduced to delete_ref() to allow deleting refs
without a dereference.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests provide a basic sanity check that textconv'd
files work. The tests try to describe how this configuration
_should_ work; thus some of the tests are marked to expect
failure.
In particular, we fail to actually textconv anything because
the 'diff.foo.binary' config option is not set, which will
be fixed in the next patch.
This also means that some "expect_failure" tests actually
seem to be fixed; in reality, this is just because textconv
is broken and its failure mode happens to make these tests
work.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git status -v" shows a diff, we did not respect the
user's usual diff preferences at all. Loading just
git_diff_basic_config would give us things like rename
limits and diff drivers. But it makes even more sense to
load git_diff_ui_config, which gives us colorization if the
user has requested it.
Note that we need to take special care to cancel
colorization when writing to the commit template file, as
described in the code comments.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We treat symlinks as text containing the results of the
symlink, so it doesn't make much sense to text-convert them.
Similarly gitlink components just end up as the text
"Subproject commit $sha1", which we should leave intact.
Note that a typechange may be broken into two parts: the
removal of the old part and the addition of the new. In that
case, we _do_ show the textconv for any part which is the
addition or removal of a file we would ordinarily textconv,
since it is purely acting on the file contents.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Diffs that have been produced with textconv almost certainly
cannot be applied, so we want to be careful not to generate
them in things like format-patch.
This introduces a new diff options, ALLOW_TEXTCONV, which
controls this behavior. It is off by default, but is
explicitly turned on for the "log" family of commands, as
well as the "diff" porcelain (but not diff-* plumbing).
Because both text conversion and external diffing are
controlled by these diff options, we can get rid of the
"plumbing versus porcelain" distinction when reading the
config. This was an attempt to control the same thing, but
suffered from being too coarse-grained.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original implementation of textconv put the conversion
into fill_mmfile. This was a bad idea for a number of
reasons:
- it made the semantics of fill_mmfile unclear. In some
cases, it was allocating data (if a text conversion
occurred), and in some cases not (if we could use the
data directly from the filespec). But the caller had
no idea which had happened, and so didn't know whether
the memory should be freed
- similarly, the caller had no idea if a text conversion
had occurred, and so didn't know whether the contents
should be treated as binary or not. This meant that we
incorrectly guessed that text-converted content was
binary and didn't actually show it (unless the user
overrode us with "diff.foo.binary = false", which then
created problems in plumbing where the text conversion
did _not_ occur)
- not all callers of fill_mmfile want the text contents. In
particular, we don't really want diffstat, whitespace
checks, patch id generation, etc, to look at the
converted contents.
This patch pulls the conversion code directly into
builtin_diff, so that we only see the conversion when
generating an actual patch. We also then know whether we are
doing a conversion, so we can check the binary-ness and free
the data from the mmfile appropriately (the previous version
leaked quite badly when text conversion was used)
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch also changes the term "custom diff driver" to
"external diff driver"; now that there are more facets of a
"custom driver" than just external diffing, it makes sense
to refer to the configuration of "diff.foo.*" as the "foo
diff driver", with "diff.foo.command" as the "external
driver for foo".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
receive-pack: fix "borrowing from alternate object store" implementation
In the alternate_object_database structure, ent->base[] is a buffer the
users can use to form pathnames to loose objects, and ent->name is a
pointer into that buffer (it points at one beyond ".git/objects/"). If
you get a call to add_refs_from_alternate() after somebody used the entry
(has_loose_object() has been called, for example), *ent->name would not be
NUL, and ent->base[] won't be the path to the object store.
This caller is expecting to read the path to the object store in ent->base[];
it needs to NUL terminate the buffer if it wants to.
gitk: Allow starting gui blame for a specific line
This adds a context menu item to the diff viewer pane that calls git
gui blame, focusing it on the clicked line. In case of combined
diffs, it also automatically deduces which parent is to be blamed.
Lines added by the diff are blamed on the current commit itself.
The context menu itself is added by this patch. It would be possible
to add the commands from the flist menu to it.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
If use_pathinfo is enabled, href now creates links that contain paths in
the form $project/$action/oldhash:/oldname..newhash:/newname for actions
that use hash_parent etc.
If any of the filename contains two consecutive dots, it's kept as a CGI
parameter since the resulting path would otherwise be ambiguous.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: parse parent..current syntax from PATH_INFO
This patch makes it possible to use an URL such as
project/action/somebranch..otherbranch:/filename to get a diff between
different version of a file. Paths like
project/action/somebranch:/somefile..otherbranch:/otherfile are parsed
as well.
All '*diff' actions and in general actions that use $hash_parent[_base]
and $file_parent (e.g. 'shortlog') can now get all of their parameters
from PATH_INFO
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generate PATH_INFO URLs in the form project/action/hash_base:/filename
rather than project/action/hash_base:filename (the latter form is still
accepted in input).
This minimal change allows relative navigation to work properly when
viewing HTML files in raw ('blob_plain') mode.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating path info URLs, reduce the number of CGI parameters by
embedding action and hash_parent:filename or hash in the path.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch enables gitweb to parse URLs with more information embedded
in PATH_INFO, reducing the need for CGI parameters. The typical gitweb
path is now $project/$action/$hash_base:$file_name or
$project/$action/$hash
This is mostly backwards compatible with the old-style gitweb paths,
$project/$branch[:$filename], except when it was used to access a branch
whose name matches a gitweb action.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
blame: use xdi_diff_hunks(), get rid of struct patch
Based on a patch by Brian Downing, this replaces the struct patch based
code for blame passing with calls to xdi_diff_hunks(). This way we
avoid generating and then parsing patches; we only let the interesting
infos be passed to our callbacks instead. This makes blame a bit faster:
add xdi_diff_hunks() for callers that only need hunk lengths
Based on a patch by Brian Downing, this uses the xdiff emit_func feature
to implement xdi_diff_hunks(). It's a function that calls a callback for
each hunk of a diff, passing its lengths.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow alternate "low-level" emit function from xdl_diff
For some users (e.g. git blame), getting textual patch output is just
extra work, as they can get all the information they need from the low-
level diff structures. Allow for an alternate low-level emit function
to be defined to allow bypassing the textual patch generation; set
xemitconf_t's emit_func member to enable this.
The (void (*)()) type is pretty ugly, but the alternative would be to
include most of the private xdiff headers in xdiff.h to get the types
required for the "proper" function prototype. Also, a (void *) won't
work, as ANSI C doesn't allow a function pointer to be cast to an
object pointer.
Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inline get_patch() to its only call site as a preparation for getting rid
of struct patch. Also we don't need to check the ptr members because
fill_origin_blob() already did, and the caller didn't check for NULL
anyway, so drop the test.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows hooks like pre-receive to look at the client's IP
address.
Of course the IP address can't be used to get strong security;
git-daemon isn't the right thing to use if you need that. However,
basic IP address checking can be good enough in some situations.
REMOTE_ADDR is the same environment variable used to communicate the
client's address to CGI scripts.
Signed-off-by: Joey Hess <joey@kitenet.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9441b61dc5 introduced serious bugs in index-pack which are
described and fixed by commit ce3f6dc655. However, despite the
boldness of those bugs, the test suite still passed.
This improves t5302-pack-index.sh so to ensure a much better code
path coverage. With commit ce3f6dc655 reverted, 17 of the 26 tests
do fail now.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, branches were listed on a single line in each section. But
if there are many branches, then horizontal, line-wrapped lists are very
inconvenient to scan for a human. This makes the lists vertical, i.e one
branch per line is printed.
Since "git remote" is porcelain, we can easily make this
backwards-incompatible change.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file is different between the working tree copy, the index, and the
HEAD, then we do not allow it to be deleted without --force.
However, this is overly tight in the face of "git add --intent-to-add":
$ git add --intent-to-add file
$ : oops, I don't actually want to stage that yet
$ git rm --cached file
error: 'empty' has staged content different from both the
file and the HEAD (use -f to force removal)
$ git rm -f --cached file
Unfortunately, there is currently no way to distinguish between an empty
file that has been added and an "intent to add" file. The ideal behavior
would be to disallow the former while allowing the latter.
This patch loosens the safety valve to allow the deletion only if we are
deleting the cached entry and the cached content is empty. This covers
the intent-to-add situation, and assumes there is little harm in not
protecting users who have legitimately added an empty file. In many
cases, the file will still be empty, in which case the safety valve does
not trigger anyway (since the content remains untouched in the working
tree). Otherwise, we do remove the fact that no content was staged, but
given that the content is by definition empty, it is not terribly
difficult for a user to recreate it.
However, we still document the desired behavior in the form of two
tests. One checks the correct removal of an intent-to-add file. The other
checks that we still disallow removal of empty files, but is marked as
expect_failure to indicate this compromise. If the intent-to-add feature
is ever extended to differentiate between normal empty files and
intent-to-add files, then the safety valve can be re-tightened.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/diff-convfilter:
diff: add filter for converting binary to text
diff: introduce diff.<driver>.binary
diff: unify external diff and funcname parsing code
t4012: use test_cmp instead of cmp
* js/maint-fetch-update-head:
pull: allow "git pull origin $something:$current_branch" into an unborn branch
Fix fetch/pull when run without --update-head-ok
* jc/maint-co-track:
Enhance hold_lock_file_for_{update,append}() API
demonstrate breakage of detached checkout with symbolic link HEAD
Fix "checkout --track -b newbranch" on detached HEAD
builtin-blame: Reencode commit messages according to git-log rules.
Currently git-blame outputs text from the commit messages
(e.g. the author name and the summary string) as-is, without
even providing any information about the encoding used for
the data. It makes interpreting the data in multilingual
environment very difficult.
This commit changes the blame implementation to recode the
messages using the rules used by other commands like git-log.
Namely, the target encoding can be specified through the
i18n.commitEncoding or i18n.logOutputEncoding options, or
directly on the command line using the --encoding parameter.
Converting the encoding before output seems to be more
friendly to the porcelain tools than simply providing the
value of the encoding header, and does not require changing
the output format.
If anybody needs the old behavior, it is possible to
achieve it by specifying --encoding=none.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitk: Fix file list context menu for merge commits
Currently it displays an ugly error box, because the treediffs array
is not filled for such commits. This fixes it by making
getmergediffline add the filenames it sees to the treediffs array
like gettreediffline does.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
gitk: Allow forcing branch creation if it already exists
If gitk knows that the branch the user tries to create exists,
it should ask whether it should overwrite it. This way the user
can either decide to choose a new name, or move the head while
preserving the reflog.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Jeff King noticed that this series uses non-portable ${var:0:7} syntax
to splice a string, which is not even in POSIX, in the script. A quick
look at around the offending part revealed a few issues, which this commit
fixes:
* Why filter output from "rev-list --left-right A...B" and look for the
ones that begin with ">"? Wouldn't "rev-list A..B" give that?
* The abbreviated SHA-1 are made with "rev-list --abbrev=7" into $TODO in
an earlier invocation, and it can be more than 7 letters to avoid
ambiguity. Not just that "${r:0:7} is not even in POSIX", but use of
it here is actively wrong.
* There is no point in catting a single file and piping it into grep.
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Turn short SHA1 names into links too
gitk: Regenerate .po files
gitk: New way of constructing menus that allows for Alt+letter accelerators
gitk: Bind Key-Return to create on new branch dialog
gitk: Fix binding for <Return> in sha1 entry field
gitk: Clean up file encoding code and add enable/disable option
gitk: Implement batch lookup and caching of encoding attrs
gitk: Enhance file encoding support
gitk: Add untranslated error messages to translation
gitk: Fix a bug in collapsing deeply nested trees
gitk: Use <Button-2> for context menus on OSX
This changes the link detection logic to accept strings of between 6
and 40 hex characters as a possible SHA1 ID of another commit, rather
than insisting on seeing the full 40 hex characters.
To make the logic that turns a possible link into an actual link work
with abbreviated IDs, this changes the way the commitinterest array is
used, and puts the code that deals with it in a pair of new functions.
The commitinterest array is now indexed by just the first 4 characters
of the interesting SHA1 ID, and each element is a list of id + command
pairs. This also pulls out the logic for expanding an abbreviated
SHA1 to the list of matching full IDs into its own function (the way
it is done is still the same slow way it was done before, which should
be improved some day).
This also fixes the bug where clicking on a link would take you to the
wrong commit if the line number of the target had changed since the
link was made.
This is based on a patch by Linus Torvalds, but totally rewritten by me.
Since commit 9441b61dc5, two issues affected correct behavior of
index-pack:
1) The real_type of a delta object is the 'real_type' of its base, not
the 'type' which can be a "delta type". Consequence of this is a
corrupted pack index file which only needs to be recreated with a
good index-pack command ('git verify-pack' will flag those).
has two issues of its own since base->obj->size should instead be
base->size as we want the size of the actual object data and not
the size of the delta object it is represented by. Except that
simply replacing base->obj->size with base->size won't make the
code more correct as the C language doesn't enforce a particular
ordering for the evaluation of needed arguments for a function call,
hence base->size could be pushed on the stack before get_base_data()
which initializes base->size is called.
Signed-off-by: Nicolas Pitre <nico@cam.org> Tested-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix testcase failure when extended attributes are in use
06cbe855 (Make core.sharedRepository more generic, 2008-04-16) made
several testcases in t1301-shared-repo.sh which fail if on a system
which creates files with extended attributes (e.g. SELinux), since ls
appends a '+' sign to the permission set in such cases. In fact,
POSIX.1 allows ls to add a single printable character after the usual
3x3 permission bits to show that an optional alternate/additional access
method is associated with the path.
This fixes the testcase to strip any such sign prior to verifying the
permission set.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Tested-by: Deskin Miller <deskinm@umich.edu>
* tr/workflow-doc:
Documentation: add manpage about workflows
Documentation: Refer to git-rebase(1) to warn against rewriting
Documentation: new upstream rebase recovery section in git-rebase
* dp/checkattr:
git-check-attr(1): use 'verse' for multi-line synopsis sections
check-attr: Add --stdin option
check-attr: add an internal check_attr() function