RelNotes/1.7.7.1: setgid bit patch is about fixing "git init" via Makefile setting
The change was actually about "git init -s" which sets the setgid bit on
SysV-style systems to allow shared access to a repository, and can provoke
errors on BSD-style systems, depending on how permissive the filesystem in
use wants to be.
More to the point, the patch was just taking a fix that arrived for
FreeBSD in v1.5.5 days and making it also apply to machines using an
(obscure) GNU userland/FreeBSD kernel mixture.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a condition in filter_forks_from_projects_list that failed if
process directory was different from project root: in such case, the subroutine
was a no-op and forks were not detected.
Signed-off-by: Julien Muchembled <jm@jmuchemb.eu> Tested-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'nd/maint-autofix-tag-in-head' into maint
* nd/maint-autofix-tag-in-head:
Accept tags in HEAD or MERGE_HEAD
merge: remove global variable head[]
merge: use return value of resolve_ref() to determine if HEAD is invalid
merge: keep stash[] a local variable
This brings back some of the performance lost in optimizing recency
order inside pack objects. We were doing extreme amounts of object
re-traversal: for the 2.14 million objects in the Linux kernel
repository, we were calling add_to_write_order() over 1.03 billion times
(a 0.2% hit rate, making 99.8% of of these calls extraneous).
Two optimizations take place here- we can start our objects array
iteration from a known point where we left off before we started trying
to find our tags, and we don't need to do the deep dives required by
add_family_to_write_order() if the object has already been marked as
filled.
These two optimizations bring some pretty spectacular results via `perf
stat`:
task-clock: 83373 ms --> 43800 ms (50% faster)
cycles: 221,633,461,676 --> 116,307,209,986 (47% fewer)
instructions: 149,299,179,939 --> 122,998,800,184 (18% fewer)
Helped-by: Ramsay Jones (format string fix in "die" message) Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf.c: remove unnecessary strbuf_grow() from strbuf_getwholeline()
This use of strbuf_grow() is a historical artifact that was once used to
ensure that strbuf.buf was allocated and properly nul-terminated. This
was added before the introduction of the slopbuf in b315c5c0, which
guarantees that strbuf.buf always points to a usable nul-terminated string.
So let's remove it.
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: use unsigned int for counter and offset values
This is done in some of the new pack layout code introduced in commit 1b4bb16b9ec331c. This more closely matches the nr_objects global that is
unsigned that these variables are based off of and bounded by.
Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is a whole 26 bytes when compiled on x86_64, but is
currently invoked over 1.037 billion times when running pack-objects on
the Linux kernel git repository. This is hitting the point where
micro-optimizations do make a difference, and inlining it only increases
the object file size by 38 bytes.
As reported by perf, this dropped task-clock from 84183 to 83373 ms, and
total cycles from 223.5 billion to 221.6 billion. Not astronomical, but
worth getting for adding one word.
Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: treat --tags like refs/tags/*:refs/tags/* when pruning
If --tags is specified, add that refspec to the list given to
prune_refs so it knows to treat it as a filter on what refs to
should consider for prunning. This way
git fetch --prune --tags origin
only prunes tags and doesn't delete the branch refs.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: honor the user-provided refspecs when pruning refs
If the user gave us refspecs on the command line, we should use those
when deciding whether to prune a ref instead of relying on the
refspecs in the config.
would delete every other ref under the origin namespace because we
were using the refspec to filter the available refs but using the
configured refspec to figure out if a ref had been deleted on the
remote. This is clearly the wrong thing to do.
Change prune_refs and get_stale_heads to simply accept a list of
references and a list of refspecs. The caller of either function needs
to decide what refspecs should be used to decide whether a ref is
stale.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote: separate out the remote_find_tracking logic into query_refspecs
Move the body of remote_find_tracking() to a new helper query_refspecs()
that finds a refspec that matches and applies the transformation, but
explicitly takes the list of refspecs, and make remote_find_tracking() a
thin wrapper of it.
Make apply_refspecs() also use query_refspecs().
Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bk/ancestry-path:
t6019: avoid refname collision on case-insensitive systems
revision: do not include sibling history in --ancestry-path output
revision: keep track of the end-user input from the command line
rev-list: Demonstrate breakage with --ancestry-path --all
* jc/diff-index-unpack:
diff-index: pass pathspec down to unpack-trees machinery
unpack-trees: allow pruning with pathspec
traverse_trees(): allow pruning with pathspec
* mm/rebase-i-exec-edit:
rebase -i: notice and warn if "exec $cmd" modifies the index or the working tree
rebase -i: clean error message for --continue after failed exec
git-send-email sends two SMTP EHLOs when using TLS encryption, however
only the first, unencrypted EHLO uses the SMTP domain that can be
optionally specified by the user (--smtp-domain). This is because the
call to hello() that produces the second, encrypted EHLO does not pass
the SMTP domain as an argument, and hence a default of
'localhost.localdomain' is used instead.
Fix by passing in the SMTP domain in this call.
Signed-off-by: Matthew Daley <mattjd@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can't currently run git-pull or git-rebase from outside
of the work tree, even with GIT_WORK_TREE set, due to an
overeager require_work_tree function. Commit e2eb527
documents this problem and provides the infrastructure for a
fix, but left it to later commits to audit and update
individual scripts.
Changing these scripts to use require_work_tree_exists is
easy to verify. We immediately call cd_to_toplevel, anyway.
Therefore no matter which function we use, the state
afterwards is one of:
1. We have a work tree, and we are at the top level.
2. We don't have a work tree, and we have died.
The only catch is that we must also make sure no code that
ran before the cd_to_toplevel assumed that we were already
in the working tree.
In this case, we will only have included shell libraries and
called set_reflog_action, neither of which care about the
current working directory at all.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
I noticed this when "git am CORRUPTED" unexpectedly failed with an
odd diagnostic, and even removed one of the files it was supposed
to have patched.
Reproduce with any valid old/new patch from which you have removed
the "+++ b/FILE" line. You'll see a diagnostic like this
fatal: unable to write file '(null)' mode 100644: Bad address
and you'll find that FILE has been removed.
The above is on glibc-based systems. On other systems, rather than
getting "null", you may provoke a segfault as git tries to
dereference the NULL file name.
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit message for c976d41 (git-branch: add options and tests for
branch renaming, 2006-11-28) mentions RENAME_REF but otherwise this is not
documented anywhere, and it does not appear in any of the tests.
Worse yet, the name of the actual file is "RENAMED-REF".
This was supposed to hold the commit object name at the tip of the branch
the most recent "branch -m/-M" renamed, but that is not necessary in order
to be able to recover from a mistake. Even when "branch -M A B" overwrites
an existing branch B, what is kept in RENAMED-REF is the commit at the tip
of the original branch A, not the commit B from the now-lost branch.
attr.c: respect core.ignorecase when matching attribute patterns
When core.ignorecase is true, the file globs configured in the
.gitattributes file should be matched case-insensitively against the paths
in the working directory. Let's do so.
Plus, add some tests.
The last set of tests is performed only on a case-insensitive filesystem.
Those tests make sure that git handles the case where the .gitignore file
resides in a subdirectory and the user supplies a path that does not match
the case in the filesystem. In that case^H^H^H^Hsituation, part of the
path supplied by the user is effectively interpreted case-insensitively,
and part of it is dependent on the setting of core.ignorecase. git will
currently only match the portion of the path below the directory holding
the .gitignore file according to the setting of core.ignorecase.
This is also partly future-proofing. Currently, git builds the attr stack
based on the path supplied by the user, so we don't have to do anything
special (like use strcmp_icase) to handle the parts of that path that don't
match the filesystem with respect to case. If git instead built the attr
stack by scanning the repository, then the paths in the origin field would
not necessarily match the paths supplied by the user. If someone makes a
change like that in the future, these tests will notice.
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: display key_delim for config --bool --get-regexp
The previous logic in show_config was to print the delimiter when the
value was set, but Boolean variables have an implicit value "true" when
they appear with no value in the config file. As a result, we got:
Fix this by defering the display of the separator until after the value
to display has been computed.
Reported-by: Brian Foster <brian.foster@maxim-ic.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
attr: read core.attributesfile from git_default_core_config
This code calls git_config from a helper function to parse the config entry
it is interested in. Calling git_config in this way may cause a problem if
the helper function can be called after a previous call to git_config by
another function since the second call to git_config may reset some
variable to the value in the config file which was previously overridden.
The above is not a problem in this case since the function passed to
git_config only parses one config entry and the variable it sets is not
assigned outside of the parsing function. But a programmer who desires
all of the standard config options to be parsed may be tempted to modify
git_attr_config() so that it falls back to git_default_config() and then it
_would_ be vulnerable to the above described behavior.
So, move the call to git_config up into the top-level cmd_* function and
move the responsibility for parsing core.attributesfile into the main
config file parser.
Which is only the logical thing to do ;-)
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cleanup: use internal memory allocation wrapper functions everywhere
The "x"-prefixed versions of strdup, malloc, etc. will check whether the
allocation was successful and terminate the process otherwise.
A few uses of malloc were left alone since they already implemented a
graceful path of failure or were in a quasi external library like xdiff.
Additionally, the call to malloc in compat/win32/syslog.c was not modified
since the syslog() implemented there is a die handler and a call to the
x-wrappers within a die handler could result in recursion should memory
allocation fail. This will have to be addressed separately.
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
attr.c: avoid inappropriate access to strbuf "buf" member
This code sequence performs a strcpy into the buf member of a strbuf
struct. The strcpy may move the position of the terminating nul of the
string and effectively change the length of string so that it does not
match the len member of the strbuf struct.
Currently, this sequence works since the strbuf was given a hint when it
was initialized to allocate enough space to accomodate the string that will
be strcpy'ed, but this is an implementation detail of strbufs, not a
guarantee.
So, lets rework this sequence so that the strbuf is only manipulated by
strbuf functions, and direct modification of its "buf" member is not
necessary.
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoking expr to compare two numbers, don't quote the
variables which are the output of 'wc -c'. On OS X, this output
includes spaces, which expr balks at:
Make ERR as first packet of remote snapshot reply work like it does in
fetch/push. Lets servers decline remote snapshot with message the same
way as declining fetch/push with a message.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the HTTP connection is broken in the middle of a fetch or clone
body, the client presented a useless error message due to part of
the upload-pack->remote-curl pkt-line protocol leaking out of the
helper as the helper's "fetch result":
error: RPC failed; result=18, HTTP code = 200
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: unpack-objects failed
warning: https unexpectedly said: '0000'
Instead when the HTTP RPC fails discard all remaining data from
upload-pack and report nothing to the transport helper. Errors
were already sent to stderr.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: do not set setgid bit on directories on GNU/kFreeBSD
The g+s bit on directories to make group ownership inherited is a
SysVism --- BSD and most of its descendants do not need it since they
do the sane thing by default without g+s. In fact, on some
filesystems (but not all --- tmpfs works this way but UFS does not),
the kernel of FreeBSD does not even allow non-root users to set setgid
bit on directories and produces errors when one tries:
$ git init --shared dir
fatal: Could not make /tmp/dir/.git/refs writable by group
Since the setgid bit would only mean "do what you were going to do
already", it's better to avoid setting it. Accordingly, ever since
v1.5.5-rc0~59^2 (Do not use GUID on dir in git init --share=all on
FreeBSD, 2008-03-05), git on true FreeBSD has done exactly that. Set
DIR_HAS_BSD_GROUP_SEMANTICS in the makefile for GNU/kFreeBSD, too, so
machines that use glibc with the kernel of FreeBSD get the same fix.
This fixes t0001-init.sh and t1301-shared-repo.sh on GNU/kFreeBSD
when running tests with --root pointing to a directory that uses
tmpfs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 582aa00 (git diff too slow for a file, 2010-05-02)
unconditionally dropped XDF_NEED_MINIMAL option from the internal xdiff
invocation to help performance on pathological cases, while hinting that a
follow-up patch could reintroduce it with "--minimal" option from the
command line.
checkout $tree $path: do not clobber local changes in $path not in $tree
Checking paths out of a tree is (currently) defined to do:
- Grab the paths from the named tree that match the given pathspec,
and add them to the index;
- Check out the contents from the index for paths that match the
pathspec to the working tree; and while at it
- If the given pathspec did not match anything, suspect a typo from the
command line and error out without updating the index nor the working
tree.
Suppose that the branch you are working on has dir/myfile, and the "other"
branch has dir/other but not dir/myfile. Further imagine that you have
either modified or removed dir/myfile in your working tree, but you have
not run "git add dir/myfile" or "git rm dir/myfile" to tell Git about your
local change. Running
$ git checkout other dir
would add dir/other to the index with the contents taken out of the
"other" branch, and check out the paths from the index that match the
pathspec "dir", namely, "dir/other" and "dir/myfile", overwriting your
local changes to "dir/myfile", even though "other" branch does not even
know about that file.
Fix it by updating the working tree only with the index entries that
was read from the "other" tree.
templates/hooks--*: remove sample hooks without any functionality
Remove the sample post-commit and post-receive hooks. The sample
post-commit doesn't contain any sample functionality and the comments do
not provide more information than already found in the documentation.
The sample post-receive hooks doesn't provide any sample functionality
either and refers in the comments to a contrib hook that might be
installed in different locations on different systems, which isn't that
helpful.
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Fix links to lines in blobs when javascript-actions are enabled
The fixLinks() function adds 'js=1' to each link that does not already
have 'js' query parameter specified. This is used to signal to gitweb
that the browser can actually do javascript when these links are used.
There are two problems with the existing code:
1. URIs with fragment and 'js' query parameter, like e.g.
...foo?js=0#l199
were not recognized as having 'js' query parameter already.
2. The 'js' query parameter, in the form of either '?js=1' or ';js=1'
was appended at the end of URI, even if it included a fragment
(had a hash part). This lead to the incorrect links like this
...foo#l199?js=1
instead of adding query parameter as last part of query, but
before the fragment part, i.e.
...foo?js=1#l199
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/hooks: adapt comment about Debian install location for contrib hooks
Placing the contrib hooks into /usr/share/doc/ wasn't a good idea in the
first place. According to the Debian policy they should be located in
/usr/share/git-core/, so let's put them there.
Thanks to Bill Allombert for reporting this through
http://bugs.debian.org/640949
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply --whitespace=error: correctly report new blank lines at end
Earlier, 77b15bb (apply --whitespace=warn/error: diagnose blank at EOF,
2009-09-03) cheated by reporting the line number of the hunk that contains
the offending line that adds new blank lines at the end of the file. All
other types of whitespace errors are reported with the line number in the
patch file that has the actual offending text.
Revert removal of multi-match discard heuristic in 27af01
27af01d (xdiff/xprepare: improve O(n*m) performance in
xdl_cleanup_records(), 2011-08-17) was supposed to be a performance
boost only. However, it unexpectedly changed the behaviour of diff.
Revert a part of 27af01d that removes logic that mark lines as
"multi-match" (ie. dis[i] == 2). This was preventing the multi-match
discard heuristic (performed in xdl_cleanup_records() and
xdl_clean_mmatch()) from executing.
Reported-by: Alexander Pepper <pepper@inf.fu-berlin.de> Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The negation example uses '*' to match everything. This used to work
before 9037026 (unpack-trees: fix sparse checkout's "unable to match
directories") because back then, the list of paths is used to match
sparse patterns, so with the patterns
*
!subdir/
subdir/ always matches any path that start with subdir/ and "*" has no
chance to get tested. The result is subdir is excluded.
After the said commit, a tree structure is dynamically created and
sparse pattern matching now follows closely how read_directory()
applies .gitignore. This solves one problem, but reveals another one.
With this new strategy, "!subdir/" rule will be only tested once when
"subdir" directory is examined. Entries inside subdir, when examined,
will match "*" and are (correctly) re-added again because any rules
without a slash will match at every directory level. In the end, "*"
can revert every negation rules.
In order to correctly exclude subdir, we must use
/*
!subdir
to limit "match all" rule at top level only.
"*" rule has no actual use in sparse checkout and can be confusing to
users. While we can automatically turn "*" to "/*", this violates
.gitignore definition. Instead, discourage "*" in favor of "/*" (in
the second example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier code wanted to run merge_file and prompt_after_failed_merge
both of which wanted to read from the standard input of the entire
script inside a while loop, which read from a pipe, and in order to
do so, it redirected the original standard input to another file
descriptor. We no longer need to do so after the previous change.
Mergetool now treats its path arguments as a pathspec (like other git
subcommands), restricting action to the given files and directories.
Files matching the pathspec are filtered so mergetool only acts on
unmerged paths; previously it would assume each path argument was in an
unresolved state, and get confused when it couldn't check out their
other stages.
Running "git mergetool subdir" will prompt to resolve all conflicted
blobs under subdir.
Signed-off-by: Jonathon Mah <me@JonathonMah.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: Do not look at working tree during a virtual ancestor merge
Fix another instance of a recursive merge incorrectly paying attention to
the working tree file during a virtual ancestor merge, that resulted in
spurious and useless "addinfo_cache failed" error message.
When running git describe --dirty the index should be refreshed. Previously
the cached index would cause describe to think that the index was dirty when,
in reality, it was just stale.
The issue was exposed by python setuptools which hardlinks files into another
directory when building a distribution.
"git diff -p" piped to external diffstat and "git diff --stat" may see
different patch text (both are valid and describe the same change
correctly) when counting the number of added and deleted lines, arriving
at different results to confuse the users, as --stat/--numstat codepath
always uses the hardcoded -U0 as the context length.
Make --stat/--numstat codepath to honor the context length the same way
as the textual patch codepath does to avoid this problem.
get_one_patchid() uses a rather dumb heuristic to determine if the
passed buffer is part of the next commit. Whenever the first 40 bytes
are a valid hexadecimal sha1 representation, get_one_patchid() returns
next_sha1.
Once the current line is longer than the fixed buffer, this will break
(provided the additional bytes make a valid hexadecimal sha1). As a result
patch-id returns incorrect results. Instead, use strbuf and read one line
at a time.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Michael Schubert <mschub@elegosoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-read-tree.txt: correct sparse-checkout and skip-worktree description
The description of .git/info/sparse-checkout and
skip-worktree is exactly the opposite of what is true, which is:
If a file matches a pattern in sparse-checkout, then (it is to be
checked out and therefore) skip-worktree is unset for that file;
otherwise, it is set (so that it is not checked out).
Currently, the opposite is documented, and (consistently) read-tree's
behavior with respect to bit flips is descibed incorrectly.
Fix it.
In hindsight, it would have been much better to have a "sparse-ignore"
or "sparse-skip" file so that an empty file would mean a full checkout,
and the file logic would be analogous to that of .gitignore, excludes
and skip-worktree.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
display_error_msgs() prints all the errors to stderr already (if any),
followed by "Aborting" (if any) to stdout. Make the latter go to stderr
instead.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9159-*.sh: skip for mergeinfo test for svn <= 1.4
t9159 relies on the command-line syntax of svn >= 1.5. Given the
declining install base of older svn versions, it is not worth our time to
support older svn syntax.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: fix exiting when checkout failed in bisect_start()
Commit 4796e823 ("bisect: introduce --no-checkout support into porcelain." Aug 4 2011)
made checking out the branch where we started depends on the "checkout" mode. But
unfortunately it lost the "|| exit" part after the checkout command.
As it makes no sense to continue if the checkout failed and as people have already
complained that the error message given when we just exit in this case is not clear, see:
this patch adds a "|| die <hopefully clear message>" part after the checkout command.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jon Seymour <jon.seymour@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4014: clean up format.thread config after each test
The threading tests turn on format.thread, but never clean
up after themselves, meaning that later tests will also have
format.thread set.
This is more annoying than most leftover config, too,
because not only does it impact the results of other tests,
but it does so non-deterministically. Threading requires the
generation of message-ids, which incorporate the current
time, meaning a slow-running test script may generate
different results from run to run.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach progress eye-candy to fetch_refs_from_bundle()
With the usual "git" transport, a large-ish transfer with "git fetch" and
"git pull" give progress eye-candy to avoid boring users. However, not
when they are reading from a bundle. I.e.
$ git pull ../git-bundle.bndl master
This teaches bundle.c:unbundle() to give "-v" option to index-pack and
tell it to give progress bar when transport decides it is necessary.
The operation in the other direction, "git bundle create", could also
learn to honor --quiet but that is a separate issue.
HEAD and MERGE_HEAD (among other branch tips) should never hold a
tag. That can only be caused by broken tools and is cumbersome to fix
by an end user with:
$ git update-ref HEAD $(git rev-parse HEAD^{commit})
which may look like a magic to a new person.
Be easy, warn users (so broken tools can be fixed if they bother to
report) and move on.
Be robust, if the given SHA-1 cannot be resolved to a commit object,
die (therefore return value is always valid).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also kill head_invalid in favor of "head_commit == NULL".
Local variable "head" in cmd_merge() is renamed to "head_sha1" to make
sure I don't miss any access because this variable should not be used
after head_commit is set (use head_commit->object.sha1 instead).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git branch" command, while not in listing mode, calls create_branch()
even when the target branch already exists, and it does so even when it is
not interested in updating the value of the branch (i.e. the name of the
commit object that sits at the tip of the existing branch). This happens
when the command is run with "--set-upstream" option.
The earlier safety-measure to prevent "git branch -f $branch $commit" from
updating the currently checked out branch did not take it into account,
and we no longer can update the tracking information of the current branch.
Minimally fix this regression by telling the validation code if it is
called to really update the value of a potentially existing branch, or if
the caller merely is interested in updating auxiliary aspects of a branch.
Reported-and-Tested-by: Jay Soffian Signed-off-by: Junio C Hamano <gitster@pobox.com>
1e5814f created t9160-git-svn-mergeinfo-push.sh on 11/9/7 40a1530 created t9160-git-svn-preserve-empty-dirs.sh on 11/7/20
The former test script is renumbered to t9161.
Signed-off-by: Frédéric Heitzmann <frederic.heitzmann@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Strip non-printable characters from syntax highlighter output
The current code, as is, passes control characters, such as form-feed
(^L) to highlight which then passes it through to the browser. User
agents (web browsers) that support 'application/xhtml+xml' usually
require that web pages declared as XHTML and with this mimetype are
well-formed XML. Unescaped control characters cannot appear within a
contents of a valid XML document.
This will cause the browser to display one of the following warnings:
* Safari v5.1 (6534.50) & Google Chrome v13.0.782.112:
This page contains the following errors:
error on line 657 at column 38: PCDATA invalid Char value 12
Below is a rendering of the page up to the first error.
* Mozilla Firefox 3.6.19 & Mozilla Firefox 5.0:
XML Parsing Error: not well-formed
Location:
http://path/to/git/repo/blah/blah
Both errors were generated by gitweb.perl v1.7.3.4 w/ highlight 2.7
using arch/ia64/kernel/unwind.c from the Linux kernel.
When syntax highlighter is not used, control characters are replaced
by esc_html(), but with syntax highlighter they were passed through to
browser (to_utf8() doesn't remove control characters).
Introduce sanitize() subroutine which strips forbidden characters, but
does not perform HTML escaping, and use it in git_blob() to sanitize
syntax highlighter output for XHTML.
Note that excluding "\t" (U+0009), "\n" (U+000A) and "\r" (U+000D) is
not strictly necessary, atleast for currently the only callsite: "\t"
tabs are replaced by spaces by untabify(), "\n" is stripped from each
line before processing it, and replacing "\r" could be considered
improvement.
Originally-by: Christopher M. Fuhrman <cfuhrman@panix.com> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/gitnamespaces.txt: cater to older asciidoc
Older asciidoc (e.g. 8.2.5 on Centos 5.5) is unhappy if a manpage does not
have a SYNOPSIS section. Show a sample (and a possibly bogus) command line
of running two commands that pay attention to this environment variable
with a customized value.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Jamey Sharp <jamey@minilop.net>
Filter-branch already requires that we have a clean work
tree before starting. However, it failed to refresh the
index before checking, which means it could be wrong in the
case of stat-dirtiness.
Instead of simply adding a call to refresh the index, let's
switch to using the require_clean_work_tree function
provided by git-sh-setup. It does exactly what we want, and
with fewer lines of code and more specific output messages.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6019: avoid refname collision on case-insensitive systems
The criss-cross tests kept failing for me because of collisions of 'a'
with 'A' etc. Prefix the lowercase refnames with an extra letter to
disambiguate.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Brad King <brad.king@kitware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>