match_pathspec_depth() is a clone of match_pathspec() except that it
can take depth limit. Computation is a bit lighter compared to
match_pathspec() because it's usually precomputed and stored in struct
pathspec.
In long term, match_pathspec() and match_one() should be removed in
favor of this function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree_entry_interesting(): optimize wildcard matching when base is matched
If base is already matched, skip that part when calling
fnmatch(). This happens quite often if users start a command from
worktree's subdirectory and prefix is usually prepended to all
pathspecs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree_entry_interesting(): fix depth limit with overlapping pathspecs
Suppose we have two pathspecs 'a' and 'a/b' (both are dirs) and depth
limit 1. In current code, pathspecs are checked in input order. When
'a/b' is checked against pathspec 'a', it fails depth limit and
therefore is excluded, although it should match 'a/b' pathspec.
This patch reorders all pathspecs alphabetically, then teaches
tree_entry_interesting() to check against the deepest pathspec first,
so depth limit of a shallower pathspec won't affect a deeper one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to replace pathspec_matches() in builtin/grep.c.
max_depth == -1 means infinite depth. Depth limit is only effective
when pathspec.recursive == 1. When pathspec.recursive == 0, the
behavior depends on match functions: non-recursive for
tree_entry_interesting() and recursive for match_pathspec{,_depth}
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-tree: convert base+baselen to writable strbuf
In traversing trees, a full path is splitted into two parts: base
directory and entry. They are however quite often concatenated
whenever a full path is needed. Current code allocates a new buffer,
do two memcpy(), use it, then release.
Instead this patch turns "base" to a writable, extendable buffer. When
a concatenation is needed, the callee only needs to append "entry" to
base, use it, then truncate the entry out again. "base" must remain
unchanged before and after entering a function.
This avoids quite a bit of malloc() and memcpy().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree_entry_interesting(): remove dependency on struct diff_options
This function can be potentially used in more places than just
tree-diff.c. "struct diff_options" does not make much sense outside
diff_tree_sha1().
While removing the use of diff_options, it also removes
tree_entry_extract() call, which means S_ISDIR() uses the entry->mode
directly, without being filtered by canon_mode() (called internally
inside tree_entry_extract).
The only use of the mode information in this function is to check the
type of the entry by giving it to S_ISDIR() macro, and the result does
not change with or without canon_mode(), so it is ok to bypass
tree_entry_extract().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old pathspec structure remains as pathspec.raw[]. New things are
stored in pathspec.items[]. There's no guarantee that the pathspec
order in raw[] is exactly as in items[].
raw[] is external (source) data and is untouched by pathspec
manipulation functions. It eases migration from old const char ** to
this new struct.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't pass "--xhtml" to hightlight in gitweb.perl script.
The "--xhtml" option is supported only in highlight < 3.0. There is no option
to enforce (X)HTML output format compatible with both highlight < 3.0 and
highlight >= 3.0. However default output format is HTML so we don't need to
explicitly specify it.
Signed-off-by: Adam Tkac <atkac@redhat.com> Helped-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
rebase -i: clarify in-editor documentation of "exec"
The hints in the current "instruction sheet" template look like so:
# Rebase 3f14246..a1d7e01 onto 3f14246
#
# Commands:
# p, pick = use commit
# r, reword = use commit, but edit the commit message
# e, edit = use commit, but stop for amending
# s, squash = use commit, but meld into previous commit
# f, fixup = like "squash", but discard this commit's log message
# x <cmd>, exec <cmd> = Run a shell command <cmd>, and stop if it fails
#
# If you remove a line here THAT COMMIT WILL BE LOST.
# However, if you remove everything, the rebase will be aborted.
#
This does not make it clear that the format of each line is
<insn> <commit id> <explanatory text that will be printed>
but the reader will probably infer that from the automatically
generated pick examples above it.
What about the "exec" instruction? By analogy, I might imagine that
the format of that line is "exec <command> <explanatory text>", and
the "x <cmd>" hint does not address that question (at first I read it
as taking an argument <cmd> that is the name of a shell). Meanwhile,
the mention of <cmd> makes the hints harder to scan as a table.
So remove the <cmd> and add some words to remind the reader that
"exec" runs a command named by the rest of the line. To make room, it
is left to the manpage to explain that that command is run using
$SHELL and that nonzero status from that command will pause the
rebase.
Wording from Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: treat filemodify with empty tree as delete
Normal git processes do not allow one to build a tree with an empty
subtree entry without trying hard at it. This is in keeping with the
general UI philosophy: git tracks content, not empty directories.
v1.7.3-rc0~75^2 (2010-06-30) changed that by making it easy to include
an empty subtree in fast-import's active commit:
One can trigger this by reading an empty tree (for example, the tree
corresponding to an empty root commit) and trying to move it to a
subtree. It is better and more closely analogous to 'git read-tree
--prefix' to treat such commands as requests to remove the subtree.
Noticed-by: David Barr <david.barr@cordelta.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: give a better error message for bogus branch
When you give a non-existent branch to git-rebase, it spits
out the usage. This can be confusing, since you may
understand the usage just fine, but simply have made a
mistake in the branch name.
Before:
$ git rebase origin bogus
Usage: git rebase ...
After:
$ git rebase origin bogus
fatal: no such branch: bogus
Usage: git rebase ...
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a ref/pathname conflict, checkout will
already do the right thing and checkout the ref. However,
for a non-existant ref, this has two advantages:
1. If a file with that pathname exists, rebase will
refresh the file from the index and then rebase the
current branch instead of producing an error.
2. If no such file exists, the error message using an
explicit "--" is better:
# before
$ git rebase -i origin bogus
error: pathspec 'bogus' did not match any file(s) known to git.
Could not checkout bogus
# after
$ git rebase -i origin bogus
fatal: invalid reference: bogus
Could not checkout bogus
The problems seem to be trigger-able only through "git
rebase -i", as regular git-rebase checks the validity of the
branch parameter as a ref very early on. However, it doesn't
hurt to be defensive.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/setup-fixes:
t1510: fix typo in the comment of a test
Documentation updates for 'GIT_WORK_TREE without GIT_DIR' historical usecase
Subject: setup: officially support --work-tree without --git-dir
tests: compress the setup tests
tests: cosmetic improvements to the repo-setup test
t/README: hint about using $(pwd) rather than $PWD in tests
Fix expected values of setup tests on Windows
Subject: setup: officially support --work-tree without --git-dir
The original intention of --work-tree was to allow people to work in a
subdirectory of their working tree that does not have an embedded .git
directory. Because their working tree, which their $cwd was in, did not
have an embedded .git, they needed to use $GIT_DIR to specify where it is,
and because this meant there was no way to discover where the root level
of the working tree was, so we needed to add $GIT_WORK_TREE to tell git
where it was.
However, this facility has long been (mis)used by people's scripts to
start git from a working tree _with_ an embedded .git directory, let git
find .git directory, and then pretend as if an unrelated directory were
the associated working tree of the .git directory found by the discovery
process. It happens to work in simple cases, and is not worth causing
"regression" to these scripts.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: do not treat reset --keep as a special case
The current treatment of "git reset --keep" emphasizes how it
differs from --hard (treatment of local changes) and how it breaks
down into plumbing (git read-tree -m -u HEAD <commit> followed by git
update-ref HEAD <commit>). This can discourage people from using
it, since it might seem to be a complex or niche option.
Better to emphasize what the --keep flag is intended for --- moving
the index and worktree from one commit to another, like "git checkout"
would --- so the reader can make a more informed decision about the
appropriate situations in which to use it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The errno check added in commit 3ba7a06 "A loose object is not corrupt
if it cannot be read due to EMFILE" only checked for whether errno is
not ENOENT and thus incorrectly treated "no error" as an error
condition.
Because of that, it never reached the code path that would report that
the object is corrupted and instead caused funny errors like:
- setup_repo, to initialize a repository or gitfile pointing to a
repository, with core.bare and core.worktree set as specified;
- try_case, to run setup from a given directory and validate the
result, with GIT_DIR and GIT_WORK_TREE set as specified;
- try_repo, to initialize a repository and call "try_case" from the
toplevel and a subdirectory;
- run_wt_tests, to run a battery of tests that check for sane
behavior when GIT_WORK_TREE is set to various positions relative to
the .git dir and cwd.
Use these helpers to make the test shorter, less repetitive, and (one
hopes) easier to understand and modify.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/maint-test-fixes:
t9501-*.sh: Fix a test failure on Cygwin
lib-git-svn.sh: Add check for mis-configured web server variables
lib-git-svn.sh: Avoid setting web server variables unnecessarily
t9142: Move call to start_httpd into the setup test
t3600-rm.sh: Don't pass a non-existent prereq to test #15
* ak/describe-exact:
describe: Delay looking up commits until searching for an inexact match
describe: Store commit_names in a hash table by commit SHA1
describe: Do not use a flex array in struct commit_name
describe: Use for_each_rawref
Documentation/fast-import: put explanation of M 040000 <dataref> "" in context
Omit needless words ("Additionally ... <path> may also" is redundant).
While at it, place the explanation of this special case after the
general rules for paths to provide the reader with some context.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, on systems that define uint32_t as an unsigned long,
gcc complains as follows:
CC vcs-svn/svndump.o
vcs-svn/svndump.c: In function `svndump_read':
vcs-svn/svndump.c:215: warning: int format, uint32_t arg (arg 2)
In order to suppress the warning we use the C99 format specifier
macro PRIu32 from <inttypes.h>.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of stripping space characters past the beginning of the
line and overflowing a buffer, stop at the beginning of the line
(mimicking the corresponding fix in remote-fd).
The argument to isspace does not need to be cast explicitly because
git isspace takes care of that already.
Noticed-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As long as sizeof(struct ll_merge_options) is small, there is not
much reason not to keep a copy of the default merge options in the BSS
section. In return, we get clearer code and one less stack frame in
the opts == NULL case.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/test-fixes:
t4135-*.sh: Skip the "backslash" tests on cygwin
t3032-*.sh: Do not strip CR from line-endings while grepping on MinGW
t3032-*.sh: Pass the -b (--binary) option to sed on cygwin
t6038-*.sh: Pass the -b (--binary) option to sed on cygwin
t0000 contains two snippets of actual test output. This causes
problems when passing -v to the test[*]: the test infrastructure
echoes the tests before running them, and the TAP parser then sees
this test output and concludes that two tests failed and that the TAP
output was badly formatted.
Guard against this by quoting the output in the source.
[*] either by running 'make smoke' with GIT_TEST_OPTS=-v, or with
prove ./t0000-basic.sh :: -v
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: suggest --amend --reset-author to fix commiter identity
Since the message advises to fix the configuration first, the
advantage of using this command is that it is cut-and-paste ready,
while using --author='...' requires the user to type his name and
email again.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9157-*.sh: Make the svn version check more precise
These tests require an svn version 1.5 or newer to run correctly.
In particular, all 1.4.x versions and earlier are too old, so fix
up the case label regex to cover this range exactly.
[Fix provided by Anders Kaseorg <andersk@MIT.EDU>]
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, bash stores absolute path names in shell variables in POSIX
format that begins with a slash, rather than in drive-letter format; such
a value is converted to the latter format when it is passed to a non-MSYS
program such as git.
When an expected test value is constructed, it must contain the value that
will be produced by git, which will be in the drive-letter format. But
TRASH_DIRECTORY is in POSIX format. Fix this by using $(pwd), which
produces drive-letter format since 4114156a (Tests on Windows: $(pwd) must
return Windows-style paths).
The change in t1510 is a straight seach-and-replace, except for the first
hunk of the diff.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added long ago as part of the userdiff refactoring
for textconv, as internally it made the code simpler and
cleaner. However, there was never a concrete use case for
actually using the config variable.
Now that Matthieu Moy has provided such a use case, it's
easy to explain it using his example.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If svn is built against one version of SQLite and run against another,
libsvn_subr needlessly errors out in operations that need to make a
commit.
That is clearly not a bug in git but let us consider the ramifications for
the test suite. git-svn uses libsvn directly and is probably broken by
that bug; it is right for git-svn tests to fail. The vcs-svn lib, on the
other hand, does not use libsvn and the test t9010 only uses svn to check
its work. This points to two possible improvements:
- do not disable most vcs-svn tests if svn is missing.
- skip validation rather than failing it when svn fails.
Bring about both by putting the svn invocations into a single test that
builds a repo to compare the test-svn-fe result against. The test will
always pass but only will set the new SVNREPO test prereq if svn succeeds;
and validation using that repo gets an SVNREPO prerequisite so it only
runs with working svn installations.
Works-around: http://bugs.debian.org/608925 Noticed-by: A Large Angry SCM <gitzilla@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
submodule: fix relative url parsing for scp-style origin
The function resolve_relative_url was not prepared to deal with an
scp-style origin 'user@host:path' in the case where 'path' is only a
single component. Fix this by extending the logic that strips one
path component from the $remoteurl.
Also add tests for both styles of URLs.
Noticed-by: Jeffrey Phillips Freeman <jeffrey.freeman@syncleus.com> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/githooks: post-rewrite-copy-notes never existed
The documentation for the post-rewrite hook contains a paragraph from
its early development, where the automatic notes copying facilities
were not part of the series and thus this had to be a hook. Later
versions of the series implemented notes copying as a core feature.
Thus mentioning post-rewrite-copy-notes was never correct. As the
other hooks do not have a "there is no default hook, but..." sentence
unless they ship a sample hook in either templates or contrib, we
simply remove the whole paragraph.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --worktree-attributes option was correctly documented in ba053ea
(archive: do not read .gitattributes in working directory,
2009-04-18). However, later in 9b4c8b0 (archive documentation:
attributes are taken from the tree by default, 2010-02-10) the
misspelling "--work-tree-attributes" was used to refer to it. Fix
this.
Noticed-by: Jeffrey Phillips Freeman <jeffrey.freeman@syncleus.com> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The BSLASHPSPEC tests (11-13) fail on cygwin, since you can't
create files containing an backslash character in the name.
In order to skip these tests, we simply stop (incorrectly)
asserting the BSLASHPSPEC prerequisite in test-lib.sh.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3032-*.sh: Do not strip CR from line-endings while grepping on MinGW
By default grep reads in text mode and converts CRLF into LF line
endings, which causes tests 4, 6 and 8 to fail. In a similar manner
to commit a94114ad (Do not strip CR when grepping HTTP headers,
2010-09-12), we set (and export) the GREP_OPTIONS variable to -U so
that grep will use binary mode.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3032-*.sh: Pass the -b (--binary) option to sed on cygwin
The test using the conflict_hunks helper function (test 9) fails
on cygwin, since sed (by default) throws away the CR from CRLF
line endings. This behaviour is undesirable, since the validation
code expects the CRLF line-ending to be present. In order to fix
the problem we pass the -b (--binary) option to sed, using the
SED_OPTIONS variable. We use the SED_STRIPS_CR prerequisite in the
conditional initialisation of SED_OPTIONS.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6038-*.sh: Pass the -b (--binary) option to sed on cygwin
The tests using the fuzz_conflict helper function (tests 5-6)
fail on cygwin in the same way they used to on MinGW, prior
to commit ca02ad3. The solution is also the same; passing the
-b (--binary) option to sed, using the SED_OPTIONS variable.
We introduce a new prerequisite SED_STRIPS_CR to use in the
conditional initialisation of SED_OPTIONS, rather than MINGW.
The new prerequisite is set in test-lib.sh for both MinGW and
Cygwin.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The executable bit on gitk-git/gitk was lost (accidentally it seems) by
commit 62ba5143ec2ab9d4083669b1b1679355e7639cd5. Put it back, so that
gitk can be run directly from a git.git checkout.
Note that the script is already executable in gitk.git, just not in
git.git.
Signed-off-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-remote add' creates a remote.origin.fetch entry in the config, we
want to replace this entry rather than add another one (which will
cause 'git fetch' to error).
This adds 'git config --remove-section remote.origin' after the fetch
for encouraging users to only use "git svn" for future updates.
[ew: rewording of commit message for present tense]
Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: StephenB <mail4stb@gmail.com>
POSIX leaves as unspecified the handling of labels greater than 8
characters. Apparently, Sun decided to treat them as errors. Make sed on
Solaris happy by trimming the length of labels to 8 characters.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0001,t1510,t3301: use sane_unset which always returns with status 0
On some shells (like /usr/xpg4/bin/sh on Solaris), unset will exit
non-zero when passed the name of a variable that has not been set. Use
sane_unset instead so that the return value of unset can be ignored while
the && linkage of the test script can be preserved.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
GNU printf, and many others, will print the string "(null)" if a NULL
pointer is passed as the argument to a "%s" format specifier. Some
implementations (like on Solaris) do not detect a NULL pointer and will
produce a segfault in this case.
So, fix this by ensuring that pointer variables do not contain the value
NULL. Assign the string "(null)" to the variables are NULL.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: remove unnecessary test when closing file descriptor
It happens that closing file descriptor fails whereas the blob is
perfectly readable. According to perlman the reasons could be:
If the file handle came from a piped open, "close" will additionally
return false if one of the other system calls involved fails, or if the
program exits with non-zero status. (If the only problem was that the
program exited non-zero, $! will be set to 0.) Closing a pipe also waits
for the process executing on the pipe to complete, in case you want to
look at the output of the pipe afterwards, and implicitly puts the exit
status value of that command into $?.
Prematurely closing the read end of a pipe (i.e. before the process writ-
ing to it at the other end has closed it) will result in a SIGPIPE being
delivered to the writer. If the other end can't handle that, be sure to
read all the data before closing the pipe.
In this case we don't mind that close fails.
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>