document submdule.$name.update=none option for gitmodules
This option was not yet described in the gitmodules documentation. We
only described it in the 'git submodule' command documentation but
gitmodules is the more natural place to look.
A short reference in the 'git submodule' documentation should be
sufficient since the details can now be found in the documentation to
gitmodules.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status --porcelain" ignored "--branch" option by mistake. The output
for "git status --branch -z" was also incorrect and did not terminate the
record for the current branch name with NUL as asked.
By Jeff King
via Jeff King
* jk/status-porcelain-z-b:
status: refactor colopts handling
status: respect "-b" for porcelain format
status: fix null termination with "-b"
status: refactor null_termination option
commit: refactor option parsing
Some time ago, "git clone" lost the progress output for its "checkout"
phase; when run without any "--quiet" option, it should give progress to
the lengthy operation.
By Erik Faye-Lund
* ef/maint-clone-progress-fix:
clone: fix progress-regression
When checking out another commit from an already detached state, we used
to report all commits that are not reachable from any of the refs as
lossage, but some of them might be reachable from the new HEAD, and there
is no need to warn about them.
By Johannes Sixt
* js/checkout-detach-count:
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
Your build platform may support hardlinks but you may prefer not to use
them, e.g. when installing to DESTDIR to make a tarball and untarring on
a filesystem that has poor support for hardlinks.
The Makefile in git-gui project may need to learn to honor the same
setting; it unconditionally creates git-citool by hardlinking git-gui.
Stream large blobs directly out to archive files without slurping
everything in memory first.
By René Scharfe (6) and Nguyễn Thái Ngọc Duy (4)
* nd/stream-to-archive:
t5000: rationalize unzip tests
archive-zip: streaming for deflated files
archive-zip: streaming for stored files
archive-zip: factor out helpers for writing sizes and CRC
archive-zip: remove uncompressed_size
archive-tar: stream large blobs to tar file
archive: delegate blob reading to backend
archive-tar: unindent write_tar_entry by one level
archive-tar: turn write_tar_entry into blob-writing only
streaming: void pointer instead of char pointer
Refs API is updated to lazily read sub-hierarchies of refs/ namespace,
so that we do not have to grab everything from the filesystem when we
are only interested in listing branches, for example.
By Michael Haggerty (17) and Junio C Hamano (1)
* mh/ref-api-lazy-loose:
refs: fix find_containing_dir() regression
refs: read loose references lazily
read_loose_refs(): eliminate ref_cache argument
struct ref_dir: store a reference to the enclosing ref_cache
search_for_subdir(): return (ref_dir *) instead of (ref_entry *)
get_ref_dir(): add function for getting a ref_dir from a ref_entry
read_loose_refs(): rename function from get_ref_dir()
refs: wrap top-level ref_dirs in ref_entries
find_containing_dir(): use strbuf in implementation of this function
bisect: copy filename string obtained from git_path()
do_for_each_reflog(): use a strbuf to hold logfile name
do_for_each_reflog(): return early on error
get_ref_dir(): take the containing directory as argument
refs.c: extract function search_for_subdir()
get_ref_dir(): require that the dirname argument ends in '/'
get_ref_dir(): rename "base" parameter to "dirname"
get_ref_dir(): use a strbuf to hold refname
get_ref_dir(): return early if directory cannot be read
"git push" over smart-http lost progress output a few releases ago.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
"log --graph" was not very friendly with "--stat" option and its output
had line breaks at wrong places.
By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (3)
* lp/diffstat-with-graph:
t4052: work around shells unable to set COLUMNS to 1
test-lib: skip test with COLUMNS=1 under mksh
Prevent graph_width of stat width from falling below min
t4052: Test diff-stat output with minimum columns
t4052: Adjust --graph --stat output for prefixes
Adjust stat width calculations to take --graph output into account
Add output_prefix_length to diff_options
t4052: test --stat output with --graph
The functions xdl_cha_first(), xdl_cha_next() and xdl_atol() are not used
by us. While removing them increases the difference to the upstream
version of libxdiff, it only adds a bit to the more than 600 differing
lines in xutils.c (mmfile_t management was simplified significantly when
the library was imported initially). Besides, if upstream modifies these
functions in the future, we won't need to think about importing those
changes, so in that sense it makes tracking modifications easier.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In abe1998 ("git checkout -b: allow switching out of an unborn
branch"), a code-path overly-optimisticly assumed that a
branch-name was specified. This is not always the case, and as
a result a NULL-pointer was attempted printed to .git/HEAD.
This could lead to at least two different failure modes:
1) vsnprintf formated the NULL-string as something useful (e.g
"(null)")
2) vsnprintf crashed
Neither were very convenient for formatting a new HEAD-reference.
To fix this, reintroduce some strictness so we only take this
new codepath if a banch-name was specified.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply: remove lego in i18n string in gitdiff_verify_name
It marks the string "...inconsistent %s filename..." where %s is either
"old" or "new" from caller. Make it two strings "...inconsistent new
filename..." and "...inconsistent old filename...".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate one new messages came from git.pot
update in 7795e42 (l10n: Update git.pot (1 new messages)).
It also updates and reformats the de.po file due to "msgmerge".
The word "remote" was translated as "entfernt"
and "anders". Both of them aren't really good
because "anders" in German means "other" and
"entfernt" has two different meanings and could
result in confusion to the users.
We've changed the translation to "extern".
Suggested-by: Jan Krüger <jk@jk.gs> Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
The word "track" was translated as "verfolgen"
and "folgen". We've decided to translate "track" in
the meaning of tracked files/content as "beobachten"
and in the remote-tracking sense as "folgen".
Suggested-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
The functions read_directory_recursive() and treat_leading_path() both
use buffers sized to fit PATH_MAX characters. The latter can be made to
overrun its buffer, e.g. like this:
Instead of trying to add a check and potentionally forgetting to address
similar cases, convert the involved functions and their helpers to use
struct strbuf. The patch is suprisingly large because the helpers
treat_path() and treat_one_path() modify the buffer as well and thus need
to be converted, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code reads the config and command-line options
into a separate "colopts" variable, and then copies the
contents of that variable into the "struct wt_status". We
can eliminate the extra variable and copy just write
straight into the wt_status struct.
This simplifies the "status" code a little bit.
Unfortunately, it makes the "commit" code one line more
complex; a side effect of the separate variable was that
"commit" did not copy the colopts variable, so any
column.status configuration had no effect.
The result still ends up cleaner, though. In the previous
version, it was unclear whether commit simply forgot to copy
the colopt variable, or whether it was intentional. Now it
explicitly turns off column options. Furthermore, if commit
later learns to respect column.status, this will make the
end result simpler. I punted on just adding that feature
now, because it was sufficiently non-obvious that it should
not go into a refactoring patch.
There is no reason not to, as the user has to explicitly ask
for it, so we are not breaking compatibility by doing so. We
can do this simply by moving the "show_branch" flag into
the wt_status struct. As a bonus, this saves us from passing
it explicitly, simplifying the code.
When the "-z" option is given to status, we are supposed to
NUL-terminate each record. However, the "-b" code to show
the tracking branch did not respect this, and always ended
with a newline.
This option is passed separately to the wt_status printing
functions, whereas every other formatting option is
contained in the wt_status struct itself. Let's do the same
here, so we can avoid passing it around through the call
stack.
The options are declared as a static global, but really they
need only be accessible from cmd_commit. Additionally,
declare the "struct wt_status" in cmd_commit and cmd_status
as static at the top of each function; this will let the
options lists reference them directly, which will facilitate
further cleanups.
index-pack: disable threading if NO_PREAD is defined
NO_PREAD simulates pread() as a sequence of seek, read, seek in
compat/pread.c. The simulation is not thread-safe because another
thread could move the file offset away in the middle of pread
operation. Do not allow threading in that case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This puts delta resolving on each base on a separate thread, one base
cache per thread. Per-thread data is grouped in struct thread_local.
When running with nr_threads == 1, no pthreads calls are made. The
system essentially runs in non-thread mode.
An experiment on a Xeon 24 core machine with git.git shows that
performance does not increase proportional to the number of cores. So
by default, we use maximum 3 cores. Some numbers with --threads from 1
to 16:
1..4
real 0m8.003s 0m5.307s 0m4.321s 0m3.830s
user 0m7.720s 0m8.009s 0m8.133s 0m8.305s
sys 0m0.224s 0m0.372s 0m0.360s 0m0.360s
5..8
real 0m3.727s 0m3.604s 0m3.332s 0m3.369s
user 0m9.361s 0m9.817s 0m9.525s 0m9.769s
sys 0m0.584s 0m0.624s 0m0.540s 0m0.560s
9..12
real 0m3.036s 0m3.139s 0m3.177s 0m2.961s
user 0m8.977s 0m10.205s 0m9.737s 0m10.073s
sys 0m0.596s 0m0.680s 0m0.684s 0m0.680s
13..16
real 0m2.985s 0m2.894s 0m2.975s 0m2.971s
user 0m9.825s 0m10.573s 0m10.833s 0m11.361s
sys 0m0.788s 0m0.732s 0m0.904s 0m1.016s
On an Intel dual core and linux-2.6.git
1..4
real 2m37.789s 2m7.963s 2m0.920s 1m58.213s
user 2m28.415s 2m52.325s 2m50.176s 2m41.187s
sys 0m7.808s 0m11.181s 0m11.224s 0m10.731s
Thanks Ramsay Jones for troubleshooting and support on MinGW platform.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: restructure pack processing into three main functions
The second pass in parse_pack_objects() are split into
resolve_deltas(). The final phase, fixing thin pack or just seal the
pack, is now in conclude_pack() function. Main pack processing is now
a sequence of these functions:
- parse_pack_objects() reads through the input pack
- resolve_deltas() makes sure all deltas can be resolved
- conclude_pack() seals the output pack
- write_idx_file() writes companion index file
- final() moves the pack/index to proper place
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-config: describe and clarify "--local <file>" option
Describe config file selection in git-config. While the usage message of
git-config shows --local, the documentation page did not contain anything
about that.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog-walk: tell explicit --date=default from not having --date at all
Introduction of opt->date_mode_explicit was a step in the right direction,
but lost that crucial bit at the very end of the callchain, and the callee
could not tell an explicitly specified "I want *date* but in default format"
from the built-in default value passed when there was no --date specified.
"git diff --stat" used to fully count a binary file with modified
execution bits whose contents is unmodified, which was not right.
By Zbigniew Jędrzejewski-Szmek (4) and Johannes Sixt (1)
* zj/diff-empty-chmod:
t4006: Windows do not have /dev/zero
diff --stat: do not run diff on indentical files
diff --stat: report mode-only changes for binary files like text files
tests: check --[short]stat output after chmod
test: modernize style of t4006
"log -z --pretty=tformat:..." does not terminate each record with NUL
and this is a beginning of an attempt to fix it. It still is not right
but the patch does not make externally observable behaviour worse.
By Jan Krüger (1) and Junio C Hamano (1)
* jk/maint-tformat-with-z:
log-tree: the previous one is still not quite right
log-tree: use custom line terminator in line termination mode
Rolls the two-directory-diff logic from diffall script (in contrib/) into
"git difftool" framework.
By Tim Henigan
* th/difftool-diffall:
difftool: print list of valid tools with '--tool-help'
difftool: teach difftool to handle directory diffs
difftool: eliminate setup_environment function
difftool: stop appending '.exe' to git
difftool: remove explicit change of PATH
difftool: exit(0) when usage is printed
difftool: add '--no-gui' option
difftool: parse options using Getopt::Long
Merge branch 'jk/maint-gitweb-test-use-sane-perl' into maint
When using a Perl script on a system where "perl" found on user's $PATH
could be ancient or otherwise broken, we allow builders to specify the
path to a good copy of Perl with $PERL_PATH. The gitweb test forgot to
use that Perl when running its test.
By Jeff King (1) and Zbigniew Jędrzejewski-Szmek (1)
* jk/maint-gitweb-test-use-sane-perl:
Consistently use perl from /usr/bin/ for scripts
t/gitweb-lib: use $PERL_PATH to run gitweb
Merge branch 'rt/cherry-revert-conflict-summary' into maint
In the older days, the header "Conflicts:" in "cherry-pick" and "merge"
was separated by a blank line from the list of paths that follow for
readability, but when "merge" was rewritten in C, we lost it by
mistake. Remove the newline from "cherry-pick" to make them match again.
By Ralf Thielow
* rt/cherry-revert-conflict-summary:
sequencer: remove additional blank line
In 5bd631b3 ("clone: support multiple levels of verbosity"), the
default behavior to show progress of the implicit checkout in
the clone-command regressed so that progress was only shown if
the verbose-option was specified.
Fix this by making option_verbosity == 0 output progress as well.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use new __gitcomp_nl; this is the last place that uses COMPREPLY and
compgen directly outside __gitcomp* functions.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
But if the new commit is actually one from this list (6aa1af6 in this
example), then the list in the warning can be truncated at the new HEAD,
because history beginning at HEAD is not "left behind". This makes it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Your filesystem may support hardlinks, but you may choose not to use them
when installing git-foo builtins and favor symblic links or copies for
whatever reason.
The installation procedure of git-gui/ directory is not touched with this
patch and git-citool still ends up being a hardlink to git-gui, but it
needs to be addressed separately.
reflog-walk: always make HEAD@{0} show indexed selectors
When we are showing reflog selectors during a walk, we infer
from context whether the user wanted to see the index in
each selector, or the reflog date. The current rules are:
1. if the user asked for an explicit date format in the
output, show the date
2. if the user asked for ref@{now}, show the date
3. if neither is true, show the index
However, if we see "ref@{0}", that should be a strong clue
that the user wants to see the counted version. In fact, it
should be much stronger than the date format in (1). The
user may have been setting the date format to use in another
part of the output (e.g., in --format="%gd (%ad)", they may
have wanted to influence the author date).
This patch flips the rules to:
1. if the user asked for ref@{0}, always show the index
2. if the user asked for ref@{now}, always show the date
3. otherwise, we have just "ref"; show them counted by
default, but respect the presence of "--date" as a clue
that the user wanted them date-based
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog-walk: clean up "flag" field of commit_reflog struct
When we prepare to walk a reflog, we parse the specification
and pull some information from it, such as which reflog to
look in (e.g., HEAD), and where to start (e.g., HEAD@{10} or
HEAD@{yesterday}). The resulting struct has a "recno" field
to show where in the reflog we are starting. It also has a
"flag" field; if true, it means the recno field came from
parsing a date like HEAD@{yesterday}.
There are two problems with this:
1. "flag" is an absolutely terrible name, as it conveys
nothing about the meaning
2. you can tell "HEAD" from "HEAD@{yesterday}", but you
can't differentiate "HEAD" from "HEAD{0}"
This patch converts the flag into a tri-state (and gives it
a better name!).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we show a reflog selector (e.g., via "git log -g"), we
perform some DWIM magic: while we normally show the entry's
index (e.g., HEAD@{1}), if the user has given us a date
with "--date", then we show a date-based select (e.g.,
HEAD@{yesterday}).
However, we don't want to trigger this magic if the
alternate date format we got was from the "log.date"
configuration; that is not sufficiently strong context for
us to invoke this particular magic. To fix this, commit f4ea32f (improve reflog date/number heuristic, 2009-09-24)
introduced a "date_mode_explicit" flag in rev_info. This
flag is set only when we see a "--date" option on the
command line, and we a vanilla date to the reflog code if
the date was not explicit.
Later, commit 8f8f547 (Introduce new pretty formats %g[sdD]
for reflog information, 2009-10-19) added another way to
show selectors, and it did not respect the date_mode_explicit
flag from f4ea32f.
This patch propagates the date_mode_explicit flag to the
pretty-print code, which can then use it to pass the
appropriate date field to the reflog code. This brings the
behavior of "%gd" in line with the other formats, and means
that its output is independent of any user configuration.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already check that @{now} and "--date" cause the
displayed selector to use the date for both the multiline
and oneline formats. However, we miss several cases:
1. The --format=%gd selector is not tested at all.
2. We do not check how the log.date config interacts with the
"--date" magic (according to f4ea32f, it should not
impact the output).
Doing so reveals that the combination of both (log.date
combined with the %gd format) does not behave as expected.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tend to keep long lists sorted (extensions are not taken into
account), which helps spot a name easily by eye. Rearrange a few
items so these lists remain sorted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function used to return NULL when asked to find the containing
directory for a ref that does not exist, allowing the caller to
omit iteration altogether. But a misconversion in an earlier change
"refs.c: extract function search_for_subdir()" started returning the
top-level directory entry, forcing callers to walk everything.
git cherry-pick: do not dereference a potential NULL pointer
In the case the pointer could be NULL, the function that gave the caller
the NULL pointer would already have issued an error message, so simply
returning early with an error status without issuing a new message is
sufficient. The same for parse_commit() that will show necessary error
message when the argument is not NULL, and will return error silently
when the argument is NULL.
Noticed-by: Michael Mueller Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jc/merge-reduce-parents-early' into maint
Octopus merge strategy did not reduce heads that are recorded in the final
commit correctly.
By Junio C Hamano (4) and Michał Kiedrowicz (1)
* jc/merge-reduce-parents-early:
fmt-merge-msg: discard needless merge parents
builtin/merge.c: reduce parents early
builtin/merge.c: collect other parents early
builtin/merge.c: remove "remoteheads" global variable
merge tests: octopus with redundant parents
Merge branch 'cb/cherry-pick-rev-path-confusion' into maint
The command line parser choked "git cherry-pick $name" when $name can be
both revision name and a pathname, even though $name can never be a path
in the context of the command.
By Clemens Buchacher
* cb/cherry-pick-rev-path-confusion:
cherry-pick: do not expect file arguments
HTTP transport that requires authentication did not work correctly when
multiple connections are used simultaneously.
By Jeff King (3) and Clemens Buchacher (1)
* cb/http-multi-curl-auth:
http: use newer curl options for setting credentials
http: clean up leak in init_curl_http_auth
fix http auth with multiple curl handles
http auth fails with multiple curl handles
Merge branch 'mb/fetch-call-a-non-branch-a-ref' into maint
The report from "git fetch" said "new branch" even for a non branch ref.
By Marc Branchaud
* mb/fetch-call-a-non-branch-a-ref:
fetch: describe new refs based on where it came from
fetch: Give remote_ref to update_local_ref() as well
Merge branch 'jm/maint-strncpy-diff-no-index' into maint
"diff --no-index" codepath had a few places that used fixed-size
buffer and truncated paths that are too long.
By Jim Meyering (1) and Junio C Hamano (1)
* jm/maint-strncpy-diff-no-index:
diff --no-index: use strbuf for temporary pathnames
diff: avoid stack-buffer-read-overrun for very long name
"git push" over smart-http lost progress output and this resurrects it.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
A couple of commands learn --column option to produce columnar output.
By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1)
* nd/columns:
tag: add --column
column: support piping stdout to external git-column process
status: add --column
branch: add --column
help: reuse print_columns() for help -a
column: add dense layout support
t9002: work around shells that are unable to set COLUMNS to 1
column: add columnar layout
Stop starting pager recursively
Add column layout skeleton and git-column
Instead of reading the whole directory of loose references the first
time any are needed, only read them on demand, one directory at a
time.
Use a new ref_entry flag bit REF_INCOMPLETE to indicate that the entry
represents a REF_DIR that hasn't been read yet. Whenever any entries
from such a directory are needed, read all of the loose references
from that directory.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>