This is GIT 1.0-rc1 in disguise. It is plausible that
relatively new parts of the system still need tweaking and
fixing, but that is why it is not 1.0 but rc ;-).
Just to avoid confusion that scripts poorly written by somebody
else ;-) might mistake this as a mount point, or backup tools
ignoring the directory. The latter is probably not a big loss,
however, considering that this directory's contents are to be
used while fresh anyway.
This patch renames git-pack-intersect to git-pack-redundant
as suggested by Petr Baudis. The new name reflects what the
program does, rather than how it does it.
Also fix a small argument parsing bug.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
merge-one-file: use empty- or common-base condintionally in two-stage merge.
If two sides added the same path completely different thing, it is
easier to see the merge pivoting on /dev/null. So check the size of
the common section we have found, and empty it if it is too small.
merge-one-file: use common as base, instead of emptiness.
Unlike the previous round that merged the path added differently
in each branches using emptiness as the base, compute a common
version and use it as input to 'merge' program.
This would show the resulting (still conflicting) file left in
the working tree as:
common file contents...
<<<<<< FILENAME
version from our branch...
======
version from their branch...
>>>>>> .merge_file_XXXXXX
more common file contents...
Merge ... /dev/null as base, instead of punting O==empty case
Instead of leaving the path unmerged in a case where each side
adds different version of the same path, attempt to merge it
with empty base and leave "our" version in the index file, just
like we do for the case in conflicting merge.
t1200: use --topo-order to keep the show-branch output stable.
Because a batch-oriented script creates many commits within a second
on a fast machine, show-branch output of the test results are unstable
without topo-order.
With the change in the previous round, we are guaranteed to come up
with the list of all relevant merge bases, but sometimes we do not
fully mark unintersting ones due to a horizon effect. Add a phase to
postprocess, so that we mark all ancestor of "interesting" commit.
This also changes the default ordering of shown commits back to
chronological order, and adds --topo-order flag to show them in
topological order.
This makes the merge-base computation resistant to the pathological
case discussed on the list earlier, by doing the same logic as
git-merge-base. As a side effect, it breaks the command's primary
function to list non-merge commit sequences, which needs to be fixed
separately.
Although it was shown that the "full contamination" was not really full
during the list discussion, the series improves things without incurring
extra parsing cost, and here is a test to check that.
When we have only one merge-base candidates in the result list,
there is no point going back to mark the reachable commits
again. And that is the most common case, so try not to waste
time on it. Suggested by Linus.
The discussion on the list demonstrated a pathological case where
an ancestor of a merge-base can be left interesting. This commit
introduces a postprocessing phase to fix it.
Some specfile cleanups after the split.
- zlib dependency fix, current method is inconsistent, you can
potentially build a package that you can't install on machine you
built it on
- Add proper defattr
- Remove trailing '.' in summary
- Add docs to split up packages
- Add git-core dependency for each subpackage
- Move arch import to separate package as well
Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Arch uses pika escaping in some places (but not all!). Specifically, commits of
the type 'patch' use pika escaping in the log entries, which we parse to know
what to add/delete and what to commit.
This patch checks for hints of pika escaping and asks tla to unescape for us.
Originally implemented by Penny Leach <penny@catalyst.net.nz>
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-clone doesn't quote the full path to the destination directory,
which causes it to fail if the path contains spaces or other characters
interpreted by the shell.
[jc: obviously I was not careful enough. Pavel, thanks for catching.]
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
When doing an octopus, we incorrectly used the previous merge
base as the reference to compute next merge base. This was
unnecessary, because that can never be better than using the
original HEAD. And that is far simpler as well ;-).
git log without --pretty showed author and author-date, while
with --pretty=full showed author and committer but no dates.
The new formatting option, --pretty=fuller, shows both name and
timestamp for author and committer.
Do not lose author name information to locale gotchas.
I noticed format-patch loses authorship information of Lukas' patch
when I run git tools with LC_LANG set to ja_JP. It turns out that
the sed script to set environment variables were not working on his
name (encoded in UTF-8), which is unfortunate but technically correct.
Force sed invocation under C locale because we always want literal byte
semantics.
Documentation: "host:path/to/repo" is git native over ssh.
You could also spell it ssh://host:/path/to/repo (or git+ssh,
ssh+git), but without method:// is shorter to type, so mention
only that one in the short and sweet list.
When git-update-ref has hit the "Ref %s changed to %s" error, I just stare
at it, left puzzled. This patch attempts to reword that to a more useful
and less confusing error message.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git-recursive the default strategy for git-pull.
This does two things:
- It changes the hardcoded default merge strategy for two-head
git-pull from resolve to recursive.
- .git/config file acquires two configuration items.
pull.twohead names the strategy for two-head case, and
pull.octopus names the strategy for octopus merge.
IOW you are paranoid, you can have the following lines in your
.git/config file and keep using git-merge-resolve when pulling
one remote:
[pull]
twohead = resolve
OTOH, you can say this:
[pull]
twohead = resolve
twohead = recursive
to try quicker resolve first, and when it fails, fall back to
recursive.
git-apply: do not fail on binary diff when not applying nor checking.
We run git-apply with --stat and --summary at the end of the pull
by default, which causes it to barf when the pull brought in changes
to binary files. Just mark them as binary patch and proceed when
not applying nor checking.
[jc: I almost missed --check until I saw Linus did something similar.]
Allow failed tests to be ignored using make's "-i". The patch also
disables parallel make in t/. This doesn't make the testing any
different as before: the tests were run sequentially before.
It also allows to run more tests, ignoring the ones usually failing
just to figure out if something else broke. (Or to ignore plainly
uninteresting situations because of the testing being done on say...
cygwin ;)
As Pasky pointed out, building in templates directory showed
list of built template files which was unneeded. This commit
also fixes another build annoyance I recently left in by
accident.
Now that the leak is gone, there is by default no limit of revisions to
import. No more message about leak when the limit (given by the -l
parameter) is reached.
Signed-off-by: Yaacov Akiba Slama <ya@slamail.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
ls-files.c and read-tree.c miss the default configuration, in
particular the filemode=false part. The recent +x bit flip made me
notice that, because git-merge refused to merge anything saying that
git-pull.sh is not up to date.
merge-recursive: Only print relevant rename messages
It isn't really interesting to know about the renames that have
already been committed to the branch you are working on. Furthermore,
the 'git-apply --stat' at the end of git-(merge|pull) will tell us
about any renames in the other branch.
With this commit only renames which require a file-level merge will
be printed.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a companion patch to 13d1cc3604a1a64cb5a6025bba8af8b74a373963
commit, which made hierarchical branch name possible. "git tag
v0.99.9/a" would fail otherwise.
- older libexpat does not know about enum XML_Status
- as in my patch for http-fetch, do not rely on a curl result in
free()d data
- calloc the new_lock structure
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
A script that can replay commits git into a CVS checkout. Tries to ensure the
sanity of the operation and supports mainly manual usage.
If you are reckless enough, you can ask it to autocommit when everything has
applied cleanly. Combined with a couple more scripts could become part of
a git2cvs gateway.
Should support adds/removes and binary files.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: talk about guts of merge in tutorial.
While discussing Jon's ASCII art on merge operations with him, I
realized that the tutorial stops talking about the plumbing
details halfway. So fill in the gory details, and update the
examples to use 'git-merge', not 'git-resolve'.
Refactored merge options into separate merge-options.txt.
Refactored fetch options into separate fetch-options.txt.
Made git-merge use merge-options.
Made git-fetch use fetch-options.
Made git-pull use merge-options and fetch-options.
Added --help option to git-pull and git-format-patch scripts.
Rewrote Documentation/Makefile to dynamically determine
include dependencies.
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Set up remotes/origin to track all remote branches.
This implements the idea Daniel Barkalow came up with, to match
the remotes/origin created by clone by default to the workflow I
use myself in my guinea pig repository, to have me eat my own
dog food.
We probably would want to use either .git/refs/local/heads/*
(idea by Linus) or .git/refs/heads/origin/* instead to reduce
the local ref namespace pollution.
git-status: do not mark unmerged paths as committable.
An unmerged path appears as both "Updated but not checked in" list,
and "Changed but not updated" list. We are not going to commit that
path until it is resolved, so remove it from the former list.
ls-files: --others should not say unmerged paths are unknown.
Jon Loeliger noticed that an unmerged path appears as
"Untracked" in git-status output, even though we show the same
path as updated/changed. Since --others means "we have not told
git about that path", we should not show unmerged paths --
obviously, git knows about them; it just does not know what we
want to do about them yet.
There's no standard libexpat for OSX, so if you install it
after-market, it can end up in various directories. Give
paths used by fink and darwinports by default to CFLAGS.