Fix diff -B/--dirstat miscounting of newly added contents
What used to happen is that diffcore_count_changes() simply ignored any
hashes in the destination that didn't match hashes in the source. EXCEPT
if the source hash didn't exist at all, in which case it would count _one_
destination hash that happened to have the "next" hash value. As a
consequence, newly added material was often undercounted, making output
from --dirstat and "complete rewrite" detection used by -B unrelialble.
This changes it so that:
- whenever it bypasses a destination hash (because it doesn't match a
source), it counts the bytes associated with that as "literal added"
- at the end (once we have used up all the source hashes), we do the same
thing with the remaining destination hashes.
- when hashes do match, and we use the difference in counts as a value,
we also use up that destination hash entry (the 'd++').
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing code checked to make sure we were not in a bare
repository when doing a hard reset. However, we should take
this one step further, and make sure we are in a worktree.
Otherwise, we can end up munging files inside of '.git'.
Furthermore, we should do the same check for --merge resets,
which have the same properties. Actually, a merge reset of
HEAD^ would already complain, since further down in the code
we want a worktree. However, it is nicer to check up-front;
then we are sure we cover all cases ("git reset --merge"
would run, even though it wasn't doing anything) and we can
give a more specific message.
Add tests to t7103 to cover these cases and some missing ones.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stringparam option is not available on older xmlto versions.
Instead, set man.base.url.for.relative.links via a .xsl file. Older
docbook versions will ignore this without causing grief to users of
older xmlto versions.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rerere: don't segfault on failure to open rr-cache
The rr-cache directory should always exist if we are doing
garbage collection (earlier code paths check this
explicitly), but we may not necessarily succeed in opening
it (for example, due to permissions problems). In that case,
we should print an error message rather than simply
segfaulting.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'mm/maint-hint-failed-merge' into maint
* mm/maint-hint-failed-merge:
user-manual: Document that "git merge" doesn't like uncommited changes.
merge-recursive: point the user to commit when file would be overwritten.
Merge branch 'mm/config-pathname-tilde-expand' into maint
* mm/config-pathname-tilde-expand:
Documentation: avoid xmlto input error
expand_user_path: expand ~ to $HOME, not to the actual homedir.
Expand ~ and ~user in core.excludesfile, commit.template
Merge branch 'jk/maint-break-rename-reduce-memory' into maint
* jk/maint-break-rename-reduce-memory:
diffcore-rename: reduce memory footprint by freeing blob data early
diffcore-break: save cnt_data for other phases
diffcore-break: free filespec data as we go
Documentation: xmlto 0.0.18 does not know --stringparam
Newer DocBook stylesheets want man.base.url.for.relative.links
parameter set when formatting manpages with external references
to turn them into full URLs, and leave a helpful "you should
set this parameter" message in the output. Earlier we added
the MAN_BASE_URL make variable to specify the value for it.
When MAN_BASE_URL is not given, it ought to be safe to set the
parameter to empty; it would result in an empty leading path for
older stylesheets that ignore the parameter, and newer ones
would produce the same "relative URL" without the message.
Unfortunately, older xmlto (at least version 0.0.18 released in
early 2004 that comes with RHEL/CentOS 5) does not understand
the --stringparam command line option, so we cannot add the
parameter definition unconditionally to the command line. Work
it around by passing the parameter only when set.
If you do not have a suitable URL prefix, you can pass a quoted empty
string to it, like so:
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 and IRIX 6.5 do not know that
ISO-8859-1 is the same as ISO8859-1. Modern platforms do know this, so use
the older name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge: do not add standard message when message is given with -m option
Even if the user explicitly gave her own message to "git merge", the
command still added its standard merge message. It resulted in a
useless repetition like this:
% git merge -m "Merge early part of side branch" `git rev-parse side~2`
% git show -s
commit 37217141e7519629353738d5e4e677a15096206f
Merge: e68e646a1d2374
Author: しらいし ななこ <nanako3@lavabit.com>
Date: Wed Dec 2 14:33:20 2009 +0900
The gave her own message because she didn't want git to add the
standard message (if she wanted to, she wouldn't have given one,
or she would have prepared it using git-fmt-merge-msg command).
Do not misidentify "git merge foo HEAD" as an old-style invocation
This was misinterpreted as an ancient style "git merge <message> HEAD
<commit> <commit>..." that merges one (or more) <commit> into the current
branch and record the resulting commit with the given message. Then a
later sanity check found that there is no <commit> specified and gave
a usage message.
Tested-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although 'git help' actually doesn't need to be run inside a git
repository and uses no repository-specific information, it looks for a git
directory. Searching for a git directory can be annoying in auto-mount
environments. With this commit, 'git help' no longer searches for a
repository when run without any options.
7c3baa9 originally modified 'git help -a' to not require a repository.
This applies the same fix for 'git help'.
Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to call exclude_cmds() after the loop, not during the loop, because
excluding a command from the array can change the indexes of objects in the
array. The result is that, depending on file ordering, some commands
weren't excluded as they should have been.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the initial implementation, "git am" had kept a dead code that
never triggered due to a typo in the variable name. Worse yet, the code,
if it weren't for the typo, would have attempted to add "[PATCH] " at the
beginning of the Subject: header when "git am" is run with its "-k"
option. However, because "git am -k" tells mailinfo to keep such prefix
when parsing the input, the "[PATCH] " added by this dead code would have
really been unnecessary duplicate.
Embarrassing is that we kept _maintaining_ the codepath without anybody
noticing for four years.
format-patch: fix parsing of "--" on the command line
When given a pathspec that does not match any path in the current work
tree with an explicit "--":
git format-patch <commit> -- <path>
the command still complains that <path> does not exist in the current work
tree and the user needs to explicitly specify "--" and errors out. This
is because it incorrectly removes "--" from the command line arguments
that is later passed to setup_revisions().
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-apply.c: pay attention to -p<n> when determining the name
The patch structure has def_name component that is used to validate the
sanity of a "diff --git" patch by checking pathnames that appear on the
patch header lines for consistency. The git_header_name() function is
used to compute this out of "diff --git a/... b/..." line, but the code
always stripped one level of prefix (i.e. "a/" and "b/"), without paying
attention to -p<n> option. Code in find_name() function that parses other
lines in the patch header (e.g. "--- a/..." and "+++ b/..." lines) however
did strip the correct number of leading paths prefixes, and the sanity
check between these computed values failed.
Teach git_header_name() to honor -p<n> option like find_name() function
does.
Found and reported by Steven J. Murdoch who also wrote tests.
pack-objects: split implications of --all-progress from progress activation
Currently the --all-progress flag is used to use force progress display
during the writing object phase even if output goes to stdout which is
primarily the case during a push operation. This has the unfortunate
side effect of forcing progress display even if stderr is not a
terminal.
Let's introduce the --all-progress-implied argument which has the same
intent except for actually forcing the activation of any progress
display. With this, progress display will be automatically inhibited
whenever stderr is not a terminal, or full progress display will be
included otherwise. This should let people use 'git push' within a cron
job without filling their logs with useless percentage displays.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Tested-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running 'git instaweb' when an instaweb server is already running will
fail (at least when the port is the same) and overwrite the pid file
used to track the currently running server. This turns out to be
especially annoying when the user tries to stop the previously running
server with 'git instaweb --stop' and is instead greeted with an error
message because the pid file has been destroyed.
Instead of allowing a user to start two instaweb servers, stop the
currently running server first and then start the new one. This should
be fine because it was never really possible to start two instaweb
servers in the first place due to the pid file issue outlined above.
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protect scripted Porcelains from GREP_OPTIONS insanity
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Use a case statement instead of calling grep to find out if the editor's
name contains the string "vim". Remove the check for emacs, as this
branch did the same as the default one anyway.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
user-manual: Document that "git merge" doesn't like uncommited changes.
We explain the user why uncommited changes can be problematic with merge,
and point to "commit" and "stash" for the solution. While talking about
commited Vs uncommited changes, we also make it clear that the result of
a merge is normally commited.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: point the user to commit when file would be overwritten.
The commit-before-pull is well accepted in the DVCS community, but is
confusing some new users. This should get them back in the right way when
the problem occurs.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not write literal "~/" or "~user" but use "{tilde}/" and "{tilde}user";
otherwise the text between them gets enclosed in
"<subscript>...</subscript>".
Add branch management for releases to gitworkflows
The current man page does a reasonable job at describing branch management
during the development process, but it does not contain any guidance as to
how the branches are affected by releases.
Add a basic introduction to the branch management undertaken during a
git.git release, so that a reader may gain some insight into how the
integration, maintenance, and topic branches are affected during the
release transition, and is thus able to better design the process for their
own project.
Other release activities such as reviews, testing, and creating
distributions are currently out of scope.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Acked-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git remote: Separate usage strings for subcommands
When the usage string for a subcommand must be printed,
only print the information relevant to that command.
This commit also removes the complete options list from
the first line of the subcommand usage string. Instead,
individual options are documented in the detailed
description following the general usage line.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore-rename: reduce memory footprint by freeing blob data early
After running one round of estimate_similarity(), filespecs on either
side will have populated their cnt_data fields, and we do not need
the blob text anymore. We used to retain the blob data to optimize
for smaller projects (not freeing the blob data here would mean that
the final output phase would not have to re-read it), but we are
efficient enough without such optimization for smaller projects anyway,
and freeing memory early will help larger projects.
The t/t9700/test.pl script uses method invocation syntax when
using the Cwd module to determine the current working directory.
This fails on cygwin, since cygwin perl specifically checks for
any arguments to the cwd() function and croak()'s with the message
"Usage: Cwd::cwd()". (In perl v5.8.8 distribution, see the file
perl-5.8.8/cygwin/cygwin.c lines 139-157)
In order to avoid the problem, we replace the method invocation
syntax with a simple function call.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
expand_user_path: expand ~ to $HOME, not to the actual homedir.
In 395de250d (Expand ~ and ~user in core.excludesfile, commit.template),
we introduced the mechanism. But expanding ~ using getpw is not what
people overriding $HOME would usually expect. In particular, git looks
for the user's .gitconfig using $HOME, so it's better to be consistent.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure $PERL_PATH is defined when the test suite is run.
Some test scripts run Perl scripts as if they were git-* scripts, and
thus need to use the same perl that will be put in the shebang line of
git*.perl commands. $PERL_PATH therefore needs to be used instead of
a bare "perl".
The tests can fail if another perl is found in $PATH before the one
defined in $PERL_PATH.
Example test failure caused by this: the perl defined in $PERL_PATH has
Error.pm installed, and therefore the Git.pm's Makefile.PL doesn't install
the private copy. The perl from $PATH doesn't have Error.pm installed, and
all git*.perl scripts invoked during the test will fail loading Error.pm.
Makefile patch by Jeff King <peff@peff.net>.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
core.autocrlf documentation: mention the crlf attribute
The description of the configuration variable is obsolete and
wrong (saying only file content is used), not just incomplete.
It has used the attribute mechanism for a long time.
The documentation of gitattributes mentions the core.autocrlf
configuration variable in its description of crlf attribute.
Refer to the gitattributes documentation from here as well.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "break" phase works by counting changes between two
blobs with the same path. We do this by splitting the file
into chunks (or lines for text oriented files) and then
keeping a count of chunk hashes.
The "rename" phase counts changes between blobs at two
different paths. However, it uses the exact same set of
chunk hashes (which are immutable for a given sha1).
The rename phase can therefore use the same hash data as
break. Unfortunately, we were throwing this data away after
computing it in the break phase. This patch instead attaches
it to the filespec and lets it live through the rename
phase, working under the assumption that most of the time
that breaks are being computed, renames will be too.
We only do this optimization for files which have actually
been broken, as those ones will be candidates for rename
detection (and it is a time-space tradeoff, so we don't want
to waste space keeping useless data).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we look at each changed file and consider breaking it, we
load the blob data and make a decision about whether to
break, which is independent of any other blobs that might
have changed. However, we keep the data in memory while we
consider breaking all of the other files. Which means that
both versions of every file you are diffing are in memory at
the same time.
This patch instead frees the blob data as we finish with
each file pair, leading to much lower memory usage.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'js/maint-diff-color-words' into maint
* js/maint-diff-color-words:
diff --color-words: bit of clean-up
diff --color-words -U0: fix the location of hunk headers
t4034-diff-words: add a test for word diff without context
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
* ja/fetch-doc:
Documentation/merge-options.txt: order options in alphabetical groups
Documentation/git-pull.txt: Add subtitles above included option files
Documentation/fetch-options.txt: order options alphabetically
* jc/receive-pack-auto:
receive-pack: run "gc --auto --quiet" and optionally "update-server-info"
gc --auto --quiet: make the notice a bit less verboase
Update 'git remote update' usage string to match man page.
Commit b344e161 taught 'git remote update' to understand
[group | remote] as its argument. The man page was updated
to document this change, but the usage string was not.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: Ensure rpm packages can be read by older rpm versions
The kernel.org hosts where the packages are built are now using Fedora
11, which defaults to sha256 for file digests instead of md5. Older
versions of rpm can not handle these packages. Tell rpmbuild to use md5
file digests for better compatibility.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In theory it is possible for sideband channel #2 to be delayed if
pack data is quick to come up for sideband channel #1. And because
data for channel #2 is read only 128 bytes at a time while pack data
is read 8192 bytes at a time, it is possible for many pack blocks to
be sent to the client before the progress message fifo is emptied,
making the situation even worse. This would result in totally garbled
progress display on the client's console as local progress gets mixed
with partial remote progress lines.
Let's prevent such situations by giving transmission priority to
progress messages over pack data at all times.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, format-patch would use its default stat
plus patch format only when no diff format was given on the
command line. This meant that "format-patch -p" would
suppress the stat and show just the patch.
Commit 68daa64 changed this to keep the stat format when we
had an "implicit" patch format, like "-U5". As a side
effect, this meant that an explicit patch format was now
ignored (because cmd_format_patch didn't know the reason
that the format was set way down in diff_opt_parse).
This patch unbreaks what 68daa64 did (while still preserving
what 68daa64 was trying to do), reinstating "-p" to suppress
the default behavior. We do this by parsing "-p" ourselves
in format-patch, and noting whether it was used explicitly.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pre-commit.sample: Diff against the empty tree when HEAD is invalid
This was already the case for the old "diff --check" call, but the new
one that checks whether there are any non-ascii file names was missing
it, making that check fail for root commits.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In pathinfo mode, we use <base href> that refers to the base location
of gitweb in order for various external media links to work well.
However, this means that for the page to refer to itself, it must
regenerate full link, and this is exactly what the blob view page
did not do for line numbers.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow curl helper to work without a local repository
It's okay to use the curl helper without a local repository, so long
as you don't use "fetch". There aren't any git programs that would try
to use it, and it doesn't make sense to try it (since there's nowhere
to write the results), but we may as well be clear.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_ls_remote() was calling transport_get() with a NULL remote and a
non-NULL url in the case where it was run outside a git
repository. This involved a bunch of ill-tested special
cases. Instead, simply get the struct remote for the URL with
remote_get(), which works fine outside a git repository, and can also
take global options into account.
This fixes a tiny and obscure bug where "git ls-remote" without a repo
didn't support global url.*.insteadOf, even though "git clone" and
"git ls-remote" in any repo did.
Also, enforce that all callers provide a struct remote to transport_get().
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>