merge-recursive: restore accidentally dropped setting of path
In commit 8daec1df03de ("merge-recursive: switch from (oid,mode) pairs
to a diff_filespec", 2019-04-05), we actually switched from
(oid,mode,path) triplets to a diff_filespec -- but most callsites in the
patch only needed to worry about oid and mode so the commit message
focused on that. The oversight in the commit message apparently spilled
over to the code as well; one of the dozen or so callsites accidentally
dropped the setting of the path in the conversion. Restore the path
setting in that location.
Also, this pointed out that our testsuite was lacking a good rename/add
test, at least one that involved the need for merge content with the
rename. Add such a test, and since rename/add vs. add/rename could
possibly be important, redo the merge the opposite direction to make
sure we don't have issues with the direction of the merge. These
testcases failed before restoring the setting of path, but with the
paths appropriately set the testcases both pass.
Reported-by: Ben Humphreys <behumphreys@atlassian.com> Based-on-patch-by: SZEDER Gábor <szeder.dev@gmail.com> Tested-by: Ben Humphreys <behumphreys@atlassian.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://git.kernel.org/pub/scm/git/git:
Git 2.22-rc3
i18n: fix typos found during l10n for git 2.22.0
RelNotes: minor typo fixes in 2.22.0 draft
list-objects-filter: disable 'sparse:path' filters
Fix two typos introduced by the following commits:
+ 31fba9d3b4 (diff-parseopt: convert --[src|dst]-prefix, 2019-03-24)
+ ed8b4132c8 (remote-curl: mark all error messages for translation,
2019-03-05)
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bit more leftover clean-up to deprepcate "rebase -p".
* js/rebase-deprecate-preserve-merges:
rebase docs: recommend `-r` over `-p`
docs: say that `--rebase=preserve` is deprecated
tests: mark a couple more test cases as requiring `rebase -p`
A brown-paper-bag bugfix to a change already in 'master'.
* nd/diff-parseopt:
parse-options: check empty value in OPT_INTEGER and OPT_ABBREV
diff-parseopt: restore -U (no argument) behavior
diff-parseopt: correct variable types that are used by parseopt
If someone wants to use as a filter a sparse file that is in the
repository, something like "--filter=sparse:oid=<ref>:<path>"
already works.
So 'sparse:path' is only interesting if the sparse file is not in
the repository. In this case though the current implementation has
a big security issue, as it makes it possible to ask the server to
read any file, like for example /etc/password, and to explore the
filesystem, as well as individual lines of files.
If someone is interested in using a sparse file that is not in the
repository as a filter, then at the minimum a config option, such
as "uploadpack.sparsePathFilter", should be implemented first to
restrict the directory from which the files specified by
'sparse:path' can be read.
For now though, let's just disable 'sparse:path' filters.
Helped-by: Matthew DeVore <matvore@google.com> Helped-by: Jeff Hostetler <git@jeffhostetler.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-options: check empty value in OPT_INTEGER and OPT_ABBREV
When parsing the argument for OPT_INTEGER and OPT_ABBREV, we check if we
can parse the entire argument to a number with "if (*s)". There is one
missing check: if "arg" is empty to begin with, we fail to notice.
This could happen with long option by writing like
git diff --inter-hunk-context= blah blah
Before 16ed6c97cc (diff-parseopt: convert --inter-hunk-context,
2019-03-24), --inter-hunk-context is handled by a custom parser
opt_arg() and does detect this correctly.
This restores the bahvior for --inter-hunk-context and make sure all
other integer options are handled the same (sane) way. For OPT_ABBREV
this is new behavior. But it makes it consistent with the rest.
PS. OPT_MAGNITUDE has similar code but git_parse_ulong() does detect
empty "arg". So it's good to go.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before d473e2e0e8 (diff.c: convert -U|--unified, 2019-01-27), -U and
--unified are implemented with a custom parser opt_arg() in diff.c. I
didn't check this code carefully and not realize that it's the
equivalent of PARSE_OPT_NONEG | PARSE_OPT_OPTARG.
In other words, if -U is specified without any argument, the option
should be accepted, and the default value should be used. Without
PARSE_OPT_OPTARG, parse_options() will reject this case and cause a
regression.
Reported-by: Bryan Turner <bturner@atlassian.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-parseopt: correct variable types that are used by parseopt
Most number-related OPT_ macros store the value in an 'int'
variable. Many of the variables in 'struct diff_options' have a
different type, but during the conversion to using parse_options() I
failed to notice and correct.
The problem was reported on s360x which is a big-endian
architechture. The variable to store '-w' option in this case is
xdl_opts, 'long' type, 8 bytes. But since parse_options() assumes
'int' (4 bytes), it will store bits in the wrong part of xdl_opts. The
problem was found on little-endian platforms because parse_options()
will accidentally store at the right part of xdl_opts.
There aren't much to say about the type change (except that 'int' for
xdl_opts should still be big enough, since Windows' long is the same
size as 'int' and nobody has complained so far). Some safety checks may
be implemented in the future to prevent class of bugs.
Reported-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of Git v2.22.0, the `--preserve-merges` backend of `git rebase` will
be officially deprecated in favor of the `--rebase-merges` backend.
Consequently, `git pull --rebase=preserve` will also be deprected. State
this explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: mark a couple more test cases as requiring `rebase -p`
The `--preserve-merges` option has been deprecated, and as a consequence
we started to mark test cases that require that option to be supported,
in preparation for removing that support eventually.
Since we marked those test cases, a couple more crept into the test
suite, and with this patch, we mark them, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, if any server options are specified during a protocol v2
fetch, server options will be sent before "command=fetch". Write server
options to the request buffer in send_fetch_request() so that the
components of the request are sent in the correct order.
The protocol documentation states that the command must come first. The
Git server implementation in serve.c (see process_request() in that
file) tolerates any order of command and capability, which is perhaps
why we haven't noticed this. This was noticed when testing against a
JGit server implementation, which follows the documentation in this
regard.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: replace incorrect logical negation by correct bitwise one
In bff014dac7d9 (builtin rebase: support the `verbose` and `diffstat`
options, 2018-09-04), we added a line that wanted to remove the
`REBASE_DIFFSTAT` bit from the flags, but it used an incorrect negation.
Found by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
progress: avoid empty line when breaking the progress line
Since commit 545dc345eb (progress: break too long progress bar lines,
2019-04-12) when splitting a too long progress line, sometimes it
looks as if a superfluous empty line were added between the title
line and the counters.
To make sure that the previously displayed progress line is completely
covered up when writing the new, shorter title line, we calculate how
many characters need to be overwritten with spaces. Alas, this
calculation doesn't account for the newline character at the end of
the new title line, and resulted in printing one more space than
strictly necessary. This extra space character doesn't matter, if the
length of the previous progress line was shorter than the width of the
terminal. However, if the previous line matched the terminal width,
then this extra space made the new line longer, effectively adding
that empty line after the title line.
Fix this off-by-one to avoid that spurious empty line.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace2: document the supported values of GIT_TRACE2* env variables
The descriptions of the GIT_TRACE2* environment variables link to the
technical docs for further details on the supported values. However,
a link like this only really works if the docs are viewed in a browser
and the full documentation is available. OTOH, in 'man git' there are
no links to conveniently click on, and distro-shipped git packages
tend to include only the man pages, while the technical docs and the
docs in html format are in a separate 'git-doc' package.
So let's describe the supported values to make the manpage more
self-contained, but still keep the references to the technical docs
because the details of the SID, and the JSON and perf output formats
are definitely beyond the scope of 'man git'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace2: rename environment variables to GIT_TRACE2*
For an environment variable that is supposed to be set by users, the
GIT_TR2* env vars are just too unclear, inconsistent, and ugly.
Most of the established GIT_* environment variables don't use
abbreviations, and in case of the few that do (GIT_DIR,
GIT_COMMON_DIR, GIT_DIFF_OPTS) it's quite obvious what the
abbreviations (DIR and OPTS) stand for. But what does TR stand for?
Track, traditional, trailer, transaction, transfer, transformation,
transition, translation, transplant, transport, traversal, tree,
trigger, truncate, trust, or ...?!
The trace2 facility, as the '2' suffix in its name suggests, is
supposed to eventually supercede Git's original trace facility. It's
reasonable to expect that the corresponding environment variables
follow suit, and after the original GIT_TRACE variables they are
called GIT_TRACE2; there is no such thing is 'GIT_TR'.
All trace2-specific config variables are, very sensibly, in the
'trace2' section, not in 'tr2'.
OTOH, we don't gain anything at all by omitting the last three
characters of "trace" from the names of these environment variables.
So let's rename all GIT_TR2* environment variables to GIT_TRACE2*,
before they make their way into a stable release.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There appears to be a bug in the toolchain generating manpages from
lettered lists. When a list is enumerated with letters, the resulting
nroff shows numbers instead. Mostly this is harmless, but in the case of
gitsubmodules, the paragraph following the list refers back to each
bullet by letter. As a result, reading this documentation via `man
gitsubmodules` is hard to parse - readers must infer that a bug exists
and a refers to 1, b refers to 2, and c refers to 3 in the list above.
The problem specifically was introduced in ad47194; previously rather
than generating numerated lists the bulleted area was entirely
monospaced in HTML and shown in plaintext in nroff.
The bug seems to exist in docbook-xml - I've reported it on May 1 via
the docbook-apps mail list - but for now it may make more sense to just
work around the issue.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fsmonitor interface got out of sync after the in-core index
file gets discarded, which has been corrected.
* js/fsmonitor-refresh-after-discarding-index:
fsmonitor: force a refresh after the index was discarded
fsmonitor: demonstrate that it is not refreshed after discard_index()
To run tests for Git SVN, our scripts for CI used to install the
git-svn package (in the hope that it would bring in the right
dependencies). This has been updated to install the more direct
dependency, namely, libsvn-perl.
* sg/ci-libsvn-perl:
ci: install 'libsvn-perl' instead of 'git-svn'
On a filesystem like HFS+, the names of the refs stored as filesystem
entities may become different from what the end-user expects, just
like files in the working tree get "renamed". Work around the
mismatch by paying attention to the core.precomposeUnicode
configuration.
* en/unicode-in-refnames:
Honor core.precomposeUnicode in more places
Update "git difftool" and "git mergetool" so that the combinations
of {diff,merge}.{tool,guitool} configuration variables serve as
fallback settings of each other in a sensible order.
* dl/difftool-mergetool:
difftool: fallback on merge.guitool
difftool: make --gui, --tool and --extcmd mutually exclusive
mergetool: fallback to tool when guitool unavailable
mergetool--lib: create gui_mode function
mergetool: use get_merge_tool function
t7610: add mergetool --gui tests
t7610: unsuppress output
Attempt to use an abbreviated option in "git clone --recurs" is
responded by a request to disambiguate between --recursive and
--recurse-submodules, which is bad because these two are synonyms.
The parse-options API has been extended to define such synonyms
more easily and not produce an unnecessary failure.
* nd/parse-options-aliases:
parse-options: don't emit "ambiguous option" for aliases
"git branch new A...B" and "git checkout -b new A...B" have been
taught that in their contexts, the notation A...B means "the merge
base between these two commits", just like "git checkout A...B"
detaches HEAD at that commit.
* dl/branch-from-3dot-merge-base:
branch: make create_branch accept a merge base rev
t2018: cleanup in current test
Performance test framework has been broken and measured the version
of Git that happens to be on $PATH, not the specified one to
measure, for a while, which has been corrected.
* ab/perf-installed-fix:
perf-lib.sh: forbid the use of GIT_TEST_INSTALLED
perf tests: add "bindir" prefix to git tree test results
perf-lib.sh: remove GIT_TEST_INSTALLED from perf-lib.sh
perf-lib.sh: make "./run <revisions>" use the correct gits
perf aggregate: remove GIT_TEST_INSTALLED from --codespeed
perf README: correct docs for 3c8f12c96c regression