% -----------------------
\subsection*{Energy and work}
+ Total energy = mass energy
+
$E_{\text{rest}} = mc^2, \quad E_K = (\gamma-1)mc^2$
- $E_{\text{total}} = E_K + E_{\text{rest}} = \gamma mc^2$
+ $E_{\text{total}} = \gamma E_{\text{rest}} = E_K + E_{\text{rest}} = \gamma mc^2$
$W = \Delta E = \Delta mc^2=(\gamma-1)m_{\text{rest}} c^2$
\[v=\sqrt{GM \over r} = \sqrt{gr} = {{2 \pi r} \over T}\]
- \[T={\sqrt{4 \pi^2 r^3 \over {GM}}}\tag{period}\]
+ \[T={\sqrt{4 \pi^2 r^3 \over {GM}}}=2 \pi \sqrt{r_{\text{alt}} \over g_{\text{alt}}}\tag{period}\]
\[r = \sqrt[3]{{GMT^2}\over{4\pi^2}}\tag{radius}\]
% -----------------------
\subsection*{Magnetic fields}
- \begin{itemize}
- \item field strength $B$ measured in tesla
- \item magnetic flux $\Phi$ measured in weber
- \item charge $q$ measured in coulombs
- \item emf $\mathcal{E}$ measured in volts
- \end{itemize}
+ % \begin{itemize}
+ % \item field strength $B$ measured in tesla
+ % \item magnetic flux $\Phi$ measured in weber
+ % \item charge $q$ measured in coulombs
+ % \item emf $\mathcal{E}$ measured in volts
+ % \end{itemize}
% \[{E_1 \over E_2}={r_1 \over r_2}^2\]
\textbf{Right hand grip:} thumb points to $I$ (single wire) or N (solenoid / coil)
+ \textbf{Magnet through ring:} consider $g$
+
\includegraphics[height=2cm]{graphics/slap-2.jpeg}
\includegraphics[height=3cm]{graphics/grip.png}
\textbf{Xfmr} core strengthens \& focuses $\Phi$
+ \columnbreak
+
% -----------------------
\subsection*{Particle acceleration}
e- accelerated with $x$ V is given $x$ eV
\[W={1\over2}mv^2=qV \tag{field or points}\]
+ \[V_{\text{point}} = (V_1 - V_2) \div 2 \tag{if midpoint} \]
\[v=\sqrt{{2qV} \over {m}}\tag{velocity of particle}\]
Circular path: $F\perp B \perp v$
{\item Series $V$ shared within branch}
\end{itemize}
- \includegraphics[height=4cm]{graphics/ac-generator.png}
-
% -----------------------
\subsection*{Motors}
% \begin{wrapfigure}{r}{-0.1\textwidth}
\includegraphics[height=4cm]{graphics/dc-motor-2.png}
- \includegraphics[height=3cm]{graphics/ac-motor.png} \\
+ % \includegraphics[height=3cm]{graphics/ac-motor.png} \\
+ \includegraphics[height=4cm]{graphics/ac-generator.png} \\
Force on I-carying wire, not Cu \\
$F=0$ for front & back of coil (parallel) \\
\subsection*{Refraction}
\includegraphics[height=3.5cm]{graphics/refraction.png}
- When a medium changes character, light is \emph{reflected}, \emph{absorbed}, and \emph{transmitted}. $\lambda$ changes, not $f$.
+ When a medium changes character, light is \emph{reflected}, \emph{absorbed}, and \emph{transmitted}. $\lambda$ changes, not $f$. $n$ changes slightly with $f$ (dispersion)
angle of incidence $\theta_i =$ angle of reflection $\theta_r$
\item $E$ and $f$ of photon: $E_2 - E_1 = hf = {hc \over \lambda}$
\item Ionisation energy - min $E$ required to remove e-
\item EMR is absorbed/emitted when $E_{\operatorname{K-in}}=\Delta E_{\operatorname{shells}}$ (i.e. $\lambda = {hc \over \Delta E_{\operatorname{shells}}}$)
- \item No. of lines - include all possible states
+ \item No. of lines - include all possible states. \Delta E \ne |\Delta E|
\end{itemize}
\subsection*{Uncertainty principle}
\subsubsection*{wave model}
\begin{itemize}
- \item cannot explain photoelectric effect
- \item $f$ is irrelevant to photocurrent
+ % \item cannot explain photoelectric effect
+ \item any $f$ works, given $t$
\item predicts delay between incidence and ejection
\item speed depends on medium
\item supported by bright spot in centre
\subsubsection*{particle model}
\begin{itemize}
- \item explains photoelectric effect
+ % \item explains photoelectric effect
\item rate of photoelectron release $\propto$ intensity
\item no time delay - one photon releases one electron
+ \item threshold frequency
\item double slit: photons interact. interference pattern still appears when a dim light source is used so that only one photon can pass at a time
\item light exerts force
\item light bent by gravity