1// Please don't remove this comment as asciidoc behaves badly when 2// the first non-empty line is ifdef/ifndef. The symptom is that 3// without this comment the <git-diff-core> attribute conditionally 4// defined below ends up being defined unconditionally. 5// Last checked with asciidoc 7.0.2. 6 7ifndef::git-format-patch[] 8ifndef::git-diff[] 9ifndef::git-log[] 10:git-diff-core: 1 11endif::git-log[] 12endif::git-diff[] 13endif::git-format-patch[] 14 15ifdef::git-format-patch[] 16-p:: 17--no-stat:: 18 Generate plain patches without any diffstats. 19endif::git-format-patch[] 20 21ifndef::git-format-patch[] 22-p:: 23-u:: 24--patch:: 25 Generate patch (see section on generating patches). 26 {git-diff? This is the default.} 27endif::git-format-patch[] 28 29-U<n>:: 30--unified=<n>:: 31 Generate diffs with <n> lines of context instead of 32 the usual three. 33ifndef::git-format-patch[] 34 Implies `-p`. 35endif::git-format-patch[] 36 37ifndef::git-format-patch[] 38--raw:: 39 Generate the raw format. 40 {git-diff-core? This is the default.} 41endif::git-format-patch[] 42 43ifndef::git-format-patch[] 44--patch-with-raw:: 45 Synonym for `-p --raw`. 46endif::git-format-patch[] 47 48--patience:: 49 Generate a diff using the "patience diff" algorithm. 50 51--stat[=width[,name-width]]:: 52 Generate a diffstat. You can override the default 53 output width for 80-column terminal by `--stat=width`. 54 The width of the filename part can be controlled by 55 giving another width to it separated by a comma. 56 57--numstat:: 58 Similar to `\--stat`, but shows number of added and 59 deleted lines in decimal notation and pathname without 60 abbreviation, to make it more machine friendly. For 61 binary files, outputs two `-` instead of saying 62 `0 0`. 63 64--shortstat:: 65 Output only the last line of the `--stat` format containing total 66 number of modified files, as well as number of added and deleted 67 lines. 68 69--dirstat[=limit]:: 70 Output the distribution of relative amount of changes (number of lines added or 71 removed) for each sub-directory. Directories with changes below 72 a cut-off percent (3% by default) are not shown. The cut-off percent 73 can be set with `--dirstat=limit`. Changes in a child directory is not 74 counted for the parent directory, unless `--cumulative` is used. 75 76--dirstat-by-file[=limit]:: 77 Same as `--dirstat`, but counts changed files instead of lines. 78 79--summary:: 80 Output a condensed summary of extended header information 81 such as creations, renames and mode changes. 82 83ifndef::git-format-patch[] 84--patch-with-stat:: 85 Synonym for `-p --stat`. 86endif::git-format-patch[] 87 88ifndef::git-format-patch[] 89 90-z:: 91ifdef::git-log[] 92 Separate the commits with NULs instead of with new newlines. 93+ 94Also, when `--raw` or `--numstat` has been given, do not munge 95pathnames and use NULs as output field terminators. 96endif::git-log[] 97ifndef::git-log[] 98 When `--raw`, `--numstat`, `--name-only` or `--name-status` has been 99 given, do not munge pathnames and use NULs as output field terminators. 100endif::git-log[] 101+ 102Without this option, each pathname output will have TAB, LF, double quotes, 103and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, 104respectively, and the pathname will be enclosed in double quotes if 105any of those replacements occurred. 106 107--name-only:: 108 Show only names of changed files. 109 110--name-status:: 111 Show only names and status of changed files. See the description 112 of the `--diff-filter` option on what the status letters mean. 113 114--submodule[=<format>]:: 115 Chose the output format for submodule differences. <format> can be one of 116 'short' and 'log'. 'short' just shows pairs of commit names, this format 117 is used when this option is not given. 'log' is the default value for this 118 option and lists the commits in that commit range like the 'summary' 119 option of linkgit:git-submodule[1] does. 120 121--color[=<when>]:: 122 Show colored diff. 123 The value must be always (the default), never, or auto. 124 125--no-color:: 126 Turn off colored diff, even when the configuration file 127 gives the default to color output. 128 Same as `--color=never`. 129 130--word-diff[=<mode>]:: 131 Show a word diff, using the <mode> to delimit changed words. 132 By default, words are delimited by whitespace; see 133 `--word-diff-regex` below. The <mode> defaults to 'plain', and 134 must be one of: 135+ 136-- 137color:: 138 Highlight changed words using only colors. Implies `--color`. 139plain:: 140 Show words as `[-removed-]` and `{+added+}`. Makes no 141 attempts to escape the delimiters if they appear in the input, 142 so the output may be ambiguous. 143porcelain:: 144 Use a special line-based format intended for script 145 consumption. Added/removed/unchanged runs are printed in the 146 usual unified diff format, starting with a `+`/`-`/` ` 147 character at the beginning of the line and extending to the 148 end of the line. Newlines in the input are represented by a 149 tilde `~` on a line of its own. 150none:: 151 Disable word diff again. 152-- 153+ 154Note that despite the name of the first mode, color is used to 155highlight the changed parts in all modes if enabled. 156 157--word-diff-regex=<regex>:: 158 Use <regex> to decide what a word is, instead of considering 159 runs of non-whitespace to be a word. Also implies 160 `--word-diff` unless it was already enabled. 161+ 162Every non-overlapping match of the 163<regex> is considered a word. Anything between these matches is 164considered whitespace and ignored(!) for the purposes of finding 165differences. You may want to append `|[^[:space:]]` to your regular 166expression to make sure that it matches all non-whitespace characters. 167A match that contains a newline is silently truncated(!) at the 168newline. 169+ 170The regex can also be set via a diff driver or configuration option, see 171linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly 172overrides any diff driver or configuration setting. Diff drivers 173override configuration settings. 174 175--color-words[=<regex>]:: 176 Equivalent to `--word-diff=color` plus (if a regex was 177 specified) `--word-diff-regex=<regex>`. 178endif::git-format-patch[] 179 180--no-renames:: 181 Turn off rename detection, even when the configuration 182 file gives the default to do so. 183 184ifndef::git-format-patch[] 185--check:: 186 Warn if changes introduce trailing whitespace 187 or an indent that uses a space before a tab. Exits with 188 non-zero status if problems are found. Not compatible with 189 --exit-code. 190endif::git-format-patch[] 191 192--full-index:: 193 Instead of the first handful of characters, show the full 194 pre- and post-image blob object names on the "index" 195 line when generating patch format output. 196 197--binary:: 198 In addition to `--full-index`, output a binary diff that 199 can be applied with `git-apply`. 200 201--abbrev[=<n>]:: 202 Instead of showing the full 40-byte hexadecimal object 203 name in diff-raw format output and diff-tree header 204 lines, show only a partial prefix. This is 205 independent of the `--full-index` option above, which controls 206 the diff-patch output format. Non default number of 207 digits can be specified with `--abbrev=<n>`. 208 209-B:: 210 Break complete rewrite changes into pairs of delete and create. 211 212-M:: 213ifndef::git-log[] 214 Detect renames. 215endif::git-log[] 216ifdef::git-log[] 217 If generating diffs, detect and report renames for each commit. 218 For following files across renames while traversing history, see 219 `--follow`. 220endif::git-log[] 221 222-C:: 223 Detect copies as well as renames. See also `--find-copies-harder`. 224 225ifndef::git-format-patch[] 226--diff-filter=[ACDMRTUXB*]:: 227 Select only files that are Added (`A`), Copied (`C`), 228 Deleted (`D`), Modified (`M`), Renamed (`R`), have their 229 type (i.e. regular file, symlink, submodule, ...) changed (`T`), 230 are Unmerged (`U`), are 231 Unknown (`X`), or have had their pairing Broken (`B`). 232 Any combination of the filter characters may be used. 233 When `*` (All-or-none) is added to the combination, all 234 paths are selected if there is any file that matches 235 other criteria in the comparison; if there is no file 236 that matches other criteria, nothing is selected. 237endif::git-format-patch[] 238 239--find-copies-harder:: 240 For performance reasons, by default, `-C` option finds copies only 241 if the original file of the copy was modified in the same 242 changeset. This flag makes the command 243 inspect unmodified files as candidates for the source of 244 copy. This is a very expensive operation for large 245 projects, so use it with caution. Giving more than one 246 `-C` option has the same effect. 247 248-l<num>:: 249 The `-M` and `-C` options require O(n^2) processing time where n 250 is the number of potential rename/copy targets. This 251 option prevents rename/copy detection from running if 252 the number of rename/copy targets exceeds the specified 253 number. 254 255ifndef::git-format-patch[] 256-S<string>:: 257 Look for differences that introduce or remove an instance of 258 <string>. Note that this is different than the string simply 259 appearing in diff output; see the 'pickaxe' entry in 260 linkgit:gitdiffcore[7] for more details. 261 262--pickaxe-all:: 263 When `-S` finds a change, show all the changes in that 264 changeset, not just the files that contain the change 265 in <string>. 266 267--pickaxe-regex:: 268 Make the <string> not a plain string but an extended POSIX 269 regex to match. 270endif::git-format-patch[] 271 272-O<orderfile>:: 273 Output the patch in the order specified in the 274 <orderfile>, which has one shell glob pattern per line. 275 276ifndef::git-format-patch[] 277-R:: 278 Swap two inputs; that is, show differences from index or 279 on-disk file to tree contents. 280 281--relative[=<path>]:: 282 When run from a subdirectory of the project, it can be 283 told to exclude changes outside the directory and show 284 pathnames relative to it with this option. When you are 285 not in a subdirectory (e.g. in a bare repository), you 286 can name which subdirectory to make the output relative 287 to by giving a <path> as an argument. 288endif::git-format-patch[] 289 290-a:: 291--text:: 292 Treat all files as text. 293 294--ignore-space-at-eol:: 295 Ignore changes in whitespace at EOL. 296 297-b:: 298--ignore-space-change:: 299 Ignore changes in amount of whitespace. This ignores whitespace 300 at line end, and considers all other sequences of one or 301 more whitespace characters to be equivalent. 302 303-w:: 304--ignore-all-space:: 305 Ignore whitespace when comparing lines. This ignores 306 differences even if one line has whitespace where the other 307 line has none. 308 309--inter-hunk-context=<lines>:: 310 Show the context between diff hunks, up to the specified number 311 of lines, thereby fusing hunks that are close to each other. 312 313ifndef::git-format-patch[] 314--exit-code:: 315 Make the program exit with codes similar to diff(1). 316 That is, it exits with 1 if there were differences and 317 0 means no differences. 318 319--quiet:: 320 Disable all output of the program. Implies `--exit-code`. 321endif::git-format-patch[] 322 323--ext-diff:: 324 Allow an external diff helper to be executed. If you set an 325 external diff driver with linkgit:gitattributes[5], you need 326 to use this option with linkgit:git-log[1] and friends. 327 328--no-ext-diff:: 329 Disallow external diff drivers. 330 331--ignore-submodules:: 332 Ignore changes to submodules in the diff generation. 333 334--src-prefix=<prefix>:: 335 Show the given source prefix instead of "a/". 336 337--dst-prefix=<prefix>:: 338 Show the given destination prefix instead of "b/". 339 340--no-prefix:: 341 Do not show any source or destination prefix. 342 343For more detailed explanation on these common options, see also 344linkgit:gitdiffcore[7].