1/* 2 * SHA-1 implementation for PowerPC. 3 * 4 * Copyright (C) 2005 Paul Mackerras <paulus@samba.org> 5 */ 6 7/* 8 * PowerPC calling convention: 9 * %r0 - volatile temp 10 * %r1 - stack pointer. 11 * %r2 - reserved 12 * %r3-%r12 - Incoming arguments & return values; volatile. 13 * %r13-%r31 - Callee-save registers 14 * %lr - Return address, volatile 15 * %ctr - volatile 16 * 17 * Register usage in this routine: 18 * %r0 - temp 19 * %r3 - argument (pointer to 5 words of SHA state) 20 * %r4 - argument (pointer to data to hash) 21 * %r5 - Contant K in SHA round (initially number of blocks to hash) 22 * %r6-%r10 - Working copies of SHA variables A..E (actually E..A order) 23 * %r11-%r26 - Data being hashed W[]. 24 * %r27-%r31 - Previous copies of A..E, for final add back. 25 * %ctr - loop count 26 */ 27 28 29/* 30 * We roll the registers for A, B, C, D, E around on each 31 * iteration; E on iteration t is D on iteration t+1, and so on. 32 * We use registers 6 - 10 for this. (Registers 27 - 31 hold 33 * the previous values.) 34 */ 35#define RA(t) (((t)+4)%5+6) 36#define RB(t) (((t)+3)%5+6) 37#define RC(t) (((t)+2)%5+6) 38#define RD(t) (((t)+1)%5+6) 39#define RE(t) (((t)+0)%5+6) 40 41/* We use registers 11 - 26 for the W values */ 42#define W(t) ((t)%16+11) 43 44/* Register 5 is used for the constant k */ 45 46/* 47 * The basic SHA-1 round function is: 48 * E += ROTL(A,5) + F(B,C,D) + W[i] + K; B = ROTL(B,30) 49 * Then the variables are renamed: (A,B,C,D,E) = (E,A,B,C,D). 50 * 51 * Every 20 rounds, the function F() and the contant K changes: 52 * - 20 rounds of f0(b,c,d) = "bit wise b ? c : d" = (^b & d) + (b & c) 53 * - 20 rounds of f1(b,c,d) = b^c^d = (b^d)^c 54 * - 20 rounds of f2(b,c,d) = majority(b,c,d) = (b&d) + ((b^d)&c) 55 * - 20 more rounds of f1(b,c,d) 56 * 57 * These are all scheduled for near-optimal performance on a G4. 58 * The G4 is a 3-issue out-of-order machine with 3 ALUs, but it can only 59 * *consider* starting the oldest 3 instructions per cycle. So to get 60 * maximum performace out of it, you have to treat it as an in-order 61 * machine. Which means interleaving the computation round t with the 62 * computation of W[t+4]. 63 * 64 * The first 16 rounds use W values loaded directly from memory, while the 65 * remaining 64 use values computed from those first 16. We preload 66 * 4 values before starting, so there are three kinds of rounds: 67 * - The first 12 (all f0) also load the W values from memory. 68 * - The next 64 compute W(i+4) in parallel. 8*f0, 20*f1, 20*f2, 16*f1. 69 * - The last 4 (all f1) do not do anything with W. 70 * 71 * Therefore, we have 6 different round functions: 72 * STEPD0_LOAD(t,s) - Perform round t and load W(s). s < 16 73 * STEPD0_UPDATE(t,s) - Perform round t and compute W(s). s >= 16. 74 * STEPD1_UPDATE(t,s) 75 * STEPD2_UPDATE(t,s) 76 * STEPD1(t) - Perform round t with no load or update. 77 * 78 * The G5 is more fully out-of-order, and can find the parallelism 79 * by itself. The big limit is that it has a 2-cycle ALU latency, so 80 * even though it's 2-way, the code has to be scheduled as if it's 81 * 4-way, which can be a limit. To help it, we try to schedule the 82 * read of RA(t) as late as possible so it doesn't stall waiting for 83 * the previous round's RE(t-1), and we try to rotate RB(t) as early 84 * as possible while reading RC(t) (= RB(t-1)) as late as possible. 85 */ 86 87/* the initial loads. */ 88#define LOADW(s) \ 89 lwz W(s),(s)*4(%r4) 90 91/* 92 * Perform a step with F0, and load W(s). Uses W(s) as a temporary 93 * before loading it. 94 * This is actually 10 instructions, which is an awkward fit. 95 * It can execute grouped as listed, or delayed one instruction. 96 * (If delayed two instructions, there is a stall before the start of the 97 * second line.) Thus, two iterations take 7 cycles, 3.5 cycles per round. 98 */ 99#define STEPD0_LOAD(t,s) \ 100add RE(t),RE(t),W(t); andc %r0,RD(t),RB(t); and W(s),RC(t),RB(t); \ 101add RE(t),RE(t),%r0; rotlwi %r0,RA(t),5; rotlwi RB(t),RB(t),30; \ 102add RE(t),RE(t),W(s); add %r0,%r0,%r5; lwz W(s),(s)*4(%r4); \ 103add RE(t),RE(t),%r0 104 105/* 106 * This is likewise awkward, 13 instructions. However, it can also 107 * execute starting with 2 out of 3 possible moduli, so it does 2 rounds 108 * in 9 cycles, 4.5 cycles/round. 109 */ 110#define STEPD0_UPDATE(t,s,loadk...) \ 111add RE(t),RE(t),W(t); andc %r0,RD(t),RB(t); xor W(s),W((s)-16),W((s)-3); \ 112add RE(t),RE(t),%r0; and %r0,RC(t),RB(t); xor W(s),W(s),W((s)-8); \ 113add RE(t),RE(t),%r0; rotlwi %r0,RA(t),5; xor W(s),W(s),W((s)-14); \ 114add RE(t),RE(t),%r5; loadk; rotlwi RB(t),RB(t),30; rotlwi W(s),W(s),1; \ 115add RE(t),RE(t),%r0 116 117/* Nicely optimal. Conveniently, also the most common. */ 118#define STEPD1_UPDATE(t,s,loadk...) \ 119add RE(t),RE(t),W(t); xor %r0,RD(t),RB(t); xor W(s),W((s)-16),W((s)-3); \ 120add RE(t),RE(t),%r5; loadk; xor %r0,%r0,RC(t); xor W(s),W(s),W((s)-8); \ 121add RE(t),RE(t),%r0; rotlwi %r0,RA(t),5; xor W(s),W(s),W((s)-14); \ 122add RE(t),RE(t),%r0; rotlwi RB(t),RB(t),30; rotlwi W(s),W(s),1 123 124/* 125 * The naked version, no UPDATE, for the last 4 rounds. 3 cycles per. 126 * We could use W(s) as a temp register, but we don't need it. 127 */ 128#define STEPD1(t) \ 129 add RE(t),RE(t),W(t); xor %r0,RD(t),RB(t); \ 130rotlwi RB(t),RB(t),30; add RE(t),RE(t),%r5; xor %r0,%r0,RC(t); \ 131add RE(t),RE(t),%r0; rotlwi %r0,RA(t),5; /* spare slot */ \ 132add RE(t),RE(t),%r0 133 134/* 135 * 14 instructions, 5 cycles per. The majority function is a bit 136 * awkward to compute. This can execute with a 1-instruction delay, 137 * but it causes a 2-instruction delay, which triggers a stall. 138 */ 139#define STEPD2_UPDATE(t,s,loadk...) \ 140add RE(t),RE(t),W(t); and %r0,RD(t),RB(t); xor W(s),W((s)-16),W((s)-3); \ 141add RE(t),RE(t),%r0; xor %r0,RD(t),RB(t); xor W(s),W(s),W((s)-8); \ 142add RE(t),RE(t),%r5; loadk; and %r0,%r0,RC(t); xor W(s),W(s),W((s)-14); \ 143add RE(t),RE(t),%r0; rotlwi %r0,RA(t),5; rotlwi W(s),W(s),1; \ 144add RE(t),RE(t),%r0; rotlwi RB(t),RB(t),30 145 146#define STEP0_LOAD4(t,s) \ 147 STEPD0_LOAD(t,s); \ 148 STEPD0_LOAD((t+1),(s)+1); \ 149 STEPD0_LOAD((t)+2,(s)+2); \ 150 STEPD0_LOAD((t)+3,(s)+3) 151 152#define STEPUP4(fn, t, s, loadk...) \ 153 STEP##fn##_UPDATE(t,s,); \ 154 STEP##fn##_UPDATE((t)+1,(s)+1,); \ 155 STEP##fn##_UPDATE((t)+2,(s)+2,); \ 156 STEP##fn##_UPDATE((t)+3,(s)+3,loadk) 157 158#define STEPUP20(fn, t, s, loadk...) \ 159 STEPUP4(fn, t, s,); \ 160 STEPUP4(fn, (t)+4, (s)+4,); \ 161 STEPUP4(fn, (t)+8, (s)+8,); \ 162 STEPUP4(fn, (t)+12, (s)+12,); \ 163 STEPUP4(fn, (t)+16, (s)+16, loadk) 164 165 .globl sha1_core 166sha1_core: 167 stwu %r1,-80(%r1) 168 stmw %r13,4(%r1) 169 170 /* Load up A - E */ 171 lmw %r27,0(%r3) 172 173 mtctr %r5 174 1751: 176 LOADW(0) 177 lis %r5,0x5a82 178 mr RE(0),%r31 179 LOADW(1) 180 mr RD(0),%r30 181 mr RC(0),%r29 182 LOADW(2) 183 ori %r5,%r5,0x7999 /* K0-19 */ 184 mr RB(0),%r28 185 LOADW(3) 186 mr RA(0),%r27 187 188 STEP0_LOAD4(0, 4) 189 STEP0_LOAD4(4, 8) 190 STEP0_LOAD4(8, 12) 191 STEPUP4(D0, 12, 16,) 192 STEPUP4(D0, 16, 20, lis %r5,0x6ed9) 193 194 ori %r5,%r5,0xeba1 /* K20-39 */ 195 STEPUP20(D1, 20, 24, lis %r5,0x8f1b) 196 197 ori %r5,%r5,0xbcdc /* K40-59 */ 198 STEPUP20(D2, 40, 44, lis %r5,0xca62) 199 200 ori %r5,%r5,0xc1d6 /* K60-79 */ 201 STEPUP4(D1, 60, 64,) 202 STEPUP4(D1, 64, 68,) 203 STEPUP4(D1, 68, 72,) 204 STEPUP4(D1, 72, 76,) 205 addi %r4,%r4,64 206 STEPD1(76) 207 STEPD1(77) 208 STEPD1(78) 209 STEPD1(79) 210 211 /* Add results to original values */ 212 add %r31,%r31,RE(0) 213 add %r30,%r30,RD(0) 214 add %r29,%r29,RC(0) 215 add %r28,%r28,RB(0) 216 add %r27,%r27,RA(0) 217 218 bdnz 1b 219 220 /* Save final hash, restore registers, and return */ 221 stmw %r27,0(%r3) 222 lmw %r13,4(%r1) 223 addi %r1,%r1,80 224 blr