1// Please don't remove this comment as asciidoc behaves badly when 2// the first non-empty line is ifdef/ifndef. The symptom is that 3// without this comment the <git-diff-core> attribute conditionally 4// defined below ends up being defined unconditionally. 5// Last checked with asciidoc 7.0.2. 6 7ifndef::git-format-patch[] 8ifndef::git-diff[] 9ifndef::git-log[] 10:git-diff-core: 1 11endif::git-log[] 12endif::git-diff[] 13endif::git-format-patch[] 14 15ifdef::git-format-patch[] 16-p:: 17--no-stat:: 18 Generate plain patches without any diffstats. 19endif::git-format-patch[] 20 21ifndef::git-format-patch[] 22-p:: 23-u:: 24--patch:: 25 Generate patch (see section on generating patches). 26ifdef::git-diff[] 27 This is the default. 28endif::git-diff[] 29 30-s:: 31--no-patch:: 32 Suppress diff output. Useful for commands like `git show` that 33 show the patch by default, or to cancel the effect of `--patch`. 34endif::git-format-patch[] 35 36-U<n>:: 37--unified=<n>:: 38 Generate diffs with <n> lines of context instead of 39 the usual three. Implies `--patch`. 40ifndef::git-format-patch[] 41 Implies `-p`. 42endif::git-format-patch[] 43 44--output=<file>:: 45 Output to a specific file instead of stdout. 46 47--output-indicator-new=<char>:: 48--output-indicator-old=<char>:: 49--output-indicator-context=<char>:: 50 Specify the character used to indicate new, old or context 51 lines in the generated patch. Normally they are '+', '-' and 52 ' ' respectively. 53 54ifndef::git-format-patch[] 55--raw:: 56ifndef::git-log[] 57 Generate the diff in raw format. 58ifdef::git-diff-core[] 59 This is the default. 60endif::git-diff-core[] 61endif::git-log[] 62ifdef::git-log[] 63 For each commit, show a summary of changes using the raw diff 64 format. See the "RAW OUTPUT FORMAT" section of 65 linkgit:git-diff[1]. This is different from showing the log 66 itself in raw format, which you can achieve with 67 `--format=raw`. 68endif::git-log[] 69endif::git-format-patch[] 70 71ifndef::git-format-patch[] 72--patch-with-raw:: 73 Synonym for `-p --raw`. 74endif::git-format-patch[] 75 76--indent-heuristic:: 77 Enable the heuristic that shifts diff hunk boundaries to make patches 78 easier to read. This is the default. 79 80--no-indent-heuristic:: 81 Disable the indent heuristic. 82 83--minimal:: 84 Spend extra time to make sure the smallest possible 85 diff is produced. 86 87--patience:: 88 Generate a diff using the "patience diff" algorithm. 89 90--histogram:: 91 Generate a diff using the "histogram diff" algorithm. 92 93--anchored=<text>:: 94 Generate a diff using the "anchored diff" algorithm. 95+ 96This option may be specified more than once. 97+ 98If a line exists in both the source and destination, exists only once, 99and starts with this text, this algorithm attempts to prevent it from 100appearing as a deletion or addition in the output. It uses the "patience 101diff" algorithm internally. 102 103--diff-algorithm={patience|minimal|histogram|myers}:: 104 Choose a diff algorithm. The variants are as follows: 105+ 106-- 107`default`, `myers`;; 108 The basic greedy diff algorithm. Currently, this is the default. 109`minimal`;; 110 Spend extra time to make sure the smallest possible diff is 111 produced. 112`patience`;; 113 Use "patience diff" algorithm when generating patches. 114`histogram`;; 115 This algorithm extends the patience algorithm to "support 116 low-occurrence common elements". 117-- 118+ 119For instance, if you configured the `diff.algorithm` variable to a 120non-default value and want to use the default one, then you 121have to use `--diff-algorithm=default` option. 122 123--stat[=<width>[,<name-width>[,<count>]]]:: 124 Generate a diffstat. By default, as much space as necessary 125 will be used for the filename part, and the rest for the graph 126 part. Maximum width defaults to terminal width, or 80 columns 127 if not connected to a terminal, and can be overridden by 128 `<width>`. The width of the filename part can be limited by 129 giving another width `<name-width>` after a comma. The width 130 of the graph part can be limited by using 131 `--stat-graph-width=<width>` (affects all commands generating 132 a stat graph) or by setting `diff.statGraphWidth=<width>` 133 (does not affect `git format-patch`). 134 By giving a third parameter `<count>`, you can limit the 135 output to the first `<count>` lines, followed by `...` if 136 there are more. 137+ 138These parameters can also be set individually with `--stat-width=<width>`, 139`--stat-name-width=<name-width>` and `--stat-count=<count>`. 140 141--compact-summary:: 142 Output a condensed summary of extended header information such 143 as file creations or deletions ("new" or "gone", optionally "+l" 144 if it's a symlink) and mode changes ("+x" or "-x" for adding 145 or removing executable bit respectively) in diffstat. The 146 information is put between the filename part and the graph 147 part. Implies `--stat`. 148 149--numstat:: 150 Similar to `--stat`, but shows number of added and 151 deleted lines in decimal notation and pathname without 152 abbreviation, to make it more machine friendly. For 153 binary files, outputs two `-` instead of saying 154 `0 0`. 155 156--shortstat:: 157 Output only the last line of the `--stat` format containing total 158 number of modified files, as well as number of added and deleted 159 lines. 160 161-X[<param1,param2,...>]:: 162--dirstat[=<param1,param2,...>]:: 163 Output the distribution of relative amount of changes for each 164 sub-directory. The behavior of `--dirstat` can be customized by 165 passing it a comma separated list of parameters. 166 The defaults are controlled by the `diff.dirstat` configuration 167 variable (see linkgit:git-config[1]). 168 The following parameters are available: 169+ 170-- 171`changes`;; 172 Compute the dirstat numbers by counting the lines that have been 173 removed from the source, or added to the destination. This ignores 174 the amount of pure code movements within a file. In other words, 175 rearranging lines in a file is not counted as much as other changes. 176 This is the default behavior when no parameter is given. 177`lines`;; 178 Compute the dirstat numbers by doing the regular line-based diff 179 analysis, and summing the removed/added line counts. (For binary 180 files, count 64-byte chunks instead, since binary files have no 181 natural concept of lines). This is a more expensive `--dirstat` 182 behavior than the `changes` behavior, but it does count rearranged 183 lines within a file as much as other changes. The resulting output 184 is consistent with what you get from the other `--*stat` options. 185`files`;; 186 Compute the dirstat numbers by counting the number of files changed. 187 Each changed file counts equally in the dirstat analysis. This is 188 the computationally cheapest `--dirstat` behavior, since it does 189 not have to look at the file contents at all. 190`cumulative`;; 191 Count changes in a child directory for the parent directory as well. 192 Note that when using `cumulative`, the sum of the percentages 193 reported may exceed 100%. The default (non-cumulative) behavior can 194 be specified with the `noncumulative` parameter. 195<limit>;; 196 An integer parameter specifies a cut-off percent (3% by default). 197 Directories contributing less than this percentage of the changes 198 are not shown in the output. 199-- 200+ 201Example: The following will count changed files, while ignoring 202directories with less than 10% of the total amount of changed files, 203and accumulating child directory counts in the parent directories: 204`--dirstat=files,10,cumulative`. 205 206--cumulative:: 207 Synonym for --dirstat=cumulative 208 209--dirstat-by-file[=<param1,param2>...]:: 210 Synonym for --dirstat=files,param1,param2... 211 212--summary:: 213 Output a condensed summary of extended header information 214 such as creations, renames and mode changes. 215 216ifndef::git-format-patch[] 217--patch-with-stat:: 218 Synonym for `-p --stat`. 219endif::git-format-patch[] 220 221ifndef::git-format-patch[] 222 223-z:: 224ifdef::git-log[] 225 Separate the commits with NULs instead of with new newlines. 226+ 227Also, when `--raw` or `--numstat` has been given, do not munge 228pathnames and use NULs as output field terminators. 229endif::git-log[] 230ifndef::git-log[] 231 When `--raw`, `--numstat`, `--name-only` or `--name-status` has been 232 given, do not munge pathnames and use NULs as output field terminators. 233endif::git-log[] 234+ 235Without this option, pathnames with "unusual" characters are quoted as 236explained for the configuration variable `core.quotePath` (see 237linkgit:git-config[1]). 238 239--name-only:: 240 Show only names of changed files. 241 242--name-status:: 243 Show only names and status of changed files. See the description 244 of the `--diff-filter` option on what the status letters mean. 245 246--submodule[=<format>]:: 247 Specify how differences in submodules are shown. When specifying 248 `--submodule=short` the 'short' format is used. This format just 249 shows the names of the commits at the beginning and end of the range. 250 When `--submodule` or `--submodule=log` is specified, the 'log' 251 format is used. This format lists the commits in the range like 252 linkgit:git-submodule[1] `summary` does. When `--submodule=diff` 253 is specified, the 'diff' format is used. This format shows an 254 inline diff of the changes in the submodule contents between the 255 commit range. Defaults to `diff.submodule` or the 'short' format 256 if the config option is unset. 257 258--color[=<when>]:: 259 Show colored diff. 260 `--color` (i.e. without '=<when>') is the same as `--color=always`. 261 '<when>' can be one of `always`, `never`, or `auto`. 262ifdef::git-diff[] 263 It can be changed by the `color.ui` and `color.diff` 264 configuration settings. 265endif::git-diff[] 266 267--no-color:: 268 Turn off colored diff. 269ifdef::git-diff[] 270 This can be used to override configuration settings. 271endif::git-diff[] 272 It is the same as `--color=never`. 273 274--color-moved[=<mode>]:: 275 Moved lines of code are colored differently. 276ifdef::git-diff[] 277 It can be changed by the `diff.colorMoved` configuration setting. 278endif::git-diff[] 279 The <mode> defaults to 'no' if the option is not given 280 and to 'zebra' if the option with no mode is given. 281 The mode must be one of: 282+ 283-- 284no:: 285 Moved lines are not highlighted. 286default:: 287 Is a synonym for `zebra`. This may change to a more sensible mode 288 in the future. 289plain:: 290 Any line that is added in one location and was removed 291 in another location will be colored with 'color.diff.newMoved'. 292 Similarly 'color.diff.oldMoved' will be used for removed lines 293 that are added somewhere else in the diff. This mode picks up any 294 moved line, but it is not very useful in a review to determine 295 if a block of code was moved without permutation. 296blocks:: 297 Blocks of moved text of at least 20 alphanumeric characters 298 are detected greedily. The detected blocks are 299 painted using either the 'color.diff.{old,new}Moved' color. 300 Adjacent blocks cannot be told apart. 301zebra:: 302 Blocks of moved text are detected as in 'blocks' mode. The blocks 303 are painted using either the 'color.diff.{old,new}Moved' color or 304 'color.diff.{old,new}MovedAlternative'. The change between 305 the two colors indicates that a new block was detected. 306dimmed-zebra:: 307 Similar to 'zebra', but additional dimming of uninteresting parts 308 of moved code is performed. The bordering lines of two adjacent 309 blocks are considered interesting, the rest is uninteresting. 310 `dimmed_zebra` is a deprecated synonym. 311-- 312 313--no-color-moved:: 314 Turn off move detection. This can be used to override configuration 315 settings. It is the same as `--color-moved=no`. 316 317--color-moved-ws=<modes>:: 318 This configures how whitespace is ignored when performing the 319 move detection for `--color-moved`. 320ifdef::git-diff[] 321 It can be set by the `diff.colorMovedWS` configuration setting. 322endif::git-diff[] 323 These modes can be given as a comma separated list: 324+ 325-- 326no:: 327 Do not ignore whitespace when performing move detection. 328ignore-space-at-eol:: 329 Ignore changes in whitespace at EOL. 330ignore-space-change:: 331 Ignore changes in amount of whitespace. This ignores whitespace 332 at line end, and considers all other sequences of one or 333 more whitespace characters to be equivalent. 334ignore-all-space:: 335 Ignore whitespace when comparing lines. This ignores differences 336 even if one line has whitespace where the other line has none. 337allow-indentation-change:: 338 Initially ignore any whitespace in the move detection, then 339 group the moved code blocks only into a block if the change in 340 whitespace is the same per line. This is incompatible with the 341 other modes. 342-- 343 344--no-color-moved-ws:: 345 Do not ignore whitespace when performing move detection. This can be 346 used to override configuration settings. It is the same as 347 `--color-moved-ws=no`. 348 349--word-diff[=<mode>]:: 350 Show a word diff, using the <mode> to delimit changed words. 351 By default, words are delimited by whitespace; see 352 `--word-diff-regex` below. The <mode> defaults to 'plain', and 353 must be one of: 354+ 355-- 356color:: 357 Highlight changed words using only colors. Implies `--color`. 358plain:: 359 Show words as `[-removed-]` and `{+added+}`. Makes no 360 attempts to escape the delimiters if they appear in the input, 361 so the output may be ambiguous. 362porcelain:: 363 Use a special line-based format intended for script 364 consumption. Added/removed/unchanged runs are printed in the 365 usual unified diff format, starting with a `+`/`-`/` ` 366 character at the beginning of the line and extending to the 367 end of the line. Newlines in the input are represented by a 368 tilde `~` on a line of its own. 369none:: 370 Disable word diff again. 371-- 372+ 373Note that despite the name of the first mode, color is used to 374highlight the changed parts in all modes if enabled. 375 376--word-diff-regex=<regex>:: 377 Use <regex> to decide what a word is, instead of considering 378 runs of non-whitespace to be a word. Also implies 379 `--word-diff` unless it was already enabled. 380+ 381Every non-overlapping match of the 382<regex> is considered a word. Anything between these matches is 383considered whitespace and ignored(!) for the purposes of finding 384differences. You may want to append `|[^[:space:]]` to your regular 385expression to make sure that it matches all non-whitespace characters. 386A match that contains a newline is silently truncated(!) at the 387newline. 388+ 389For example, `--word-diff-regex=.` will treat each character as a word 390and, correspondingly, show differences character by character. 391+ 392The regex can also be set via a diff driver or configuration option, see 393linkgit:gitattributes[5] or linkgit:git-config[1]. Giving it explicitly 394overrides any diff driver or configuration setting. Diff drivers 395override configuration settings. 396 397--color-words[=<regex>]:: 398 Equivalent to `--word-diff=color` plus (if a regex was 399 specified) `--word-diff-regex=<regex>`. 400endif::git-format-patch[] 401 402--no-renames:: 403 Turn off rename detection, even when the configuration 404 file gives the default to do so. 405 406--[no-]rename-empty:: 407 Whether to use empty blobs as rename source. 408 409ifndef::git-format-patch[] 410--check:: 411 Warn if changes introduce conflict markers or whitespace errors. 412 What are considered whitespace errors is controlled by `core.whitespace` 413 configuration. By default, trailing whitespaces (including 414 lines that consist solely of whitespaces) and a space character 415 that is immediately followed by a tab character inside the 416 initial indent of the line are considered whitespace errors. 417 Exits with non-zero status if problems are found. Not compatible 418 with --exit-code. 419 420--ws-error-highlight=<kind>:: 421 Highlight whitespace errors in the `context`, `old` or `new` 422 lines of the diff. Multiple values are separated by comma, 423 `none` resets previous values, `default` reset the list to 424 `new` and `all` is a shorthand for `old,new,context`. When 425 this option is not given, and the configuration variable 426 `diff.wsErrorHighlight` is not set, only whitespace errors in 427 `new` lines are highlighted. The whitespace errors are colored 428 with `color.diff.whitespace`. 429 430endif::git-format-patch[] 431 432--full-index:: 433 Instead of the first handful of characters, show the full 434 pre- and post-image blob object names on the "index" 435 line when generating patch format output. 436 437--binary:: 438 In addition to `--full-index`, output a binary diff that 439 can be applied with `git-apply`. Implies `--patch`. 440 441--abbrev[=<n>]:: 442 Instead of showing the full 40-byte hexadecimal object 443 name in diff-raw format output and diff-tree header 444 lines, show only a partial prefix. This is 445 independent of the `--full-index` option above, which controls 446 the diff-patch output format. Non default number of 447 digits can be specified with `--abbrev=<n>`. 448 449-B[<n>][/<m>]:: 450--break-rewrites[=[<n>][/<m>]]:: 451 Break complete rewrite changes into pairs of delete and 452 create. This serves two purposes: 453+ 454It affects the way a change that amounts to a total rewrite of a file 455not as a series of deletion and insertion mixed together with a very 456few lines that happen to match textually as the context, but as a 457single deletion of everything old followed by a single insertion of 458everything new, and the number `m` controls this aspect of the -B 459option (defaults to 60%). `-B/70%` specifies that less than 30% of the 460original should remain in the result for Git to consider it a total 461rewrite (i.e. otherwise the resulting patch will be a series of 462deletion and insertion mixed together with context lines). 463+ 464When used with -M, a totally-rewritten file is also considered as the 465source of a rename (usually -M only considers a file that disappeared 466as the source of a rename), and the number `n` controls this aspect of 467the -B option (defaults to 50%). `-B20%` specifies that a change with 468addition and deletion compared to 20% or more of the file's size are 469eligible for being picked up as a possible source of a rename to 470another file. 471 472-M[<n>]:: 473--find-renames[=<n>]:: 474ifndef::git-log[] 475 Detect renames. 476endif::git-log[] 477ifdef::git-log[] 478 If generating diffs, detect and report renames for each commit. 479 For following files across renames while traversing history, see 480 `--follow`. 481endif::git-log[] 482 If `n` is specified, it is a threshold on the similarity 483 index (i.e. amount of addition/deletions compared to the 484 file's size). For example, `-M90%` means Git should consider a 485 delete/add pair to be a rename if more than 90% of the file 486 hasn't changed. Without a `%` sign, the number is to be read as 487 a fraction, with a decimal point before it. I.e., `-M5` becomes 488 0.5, and is thus the same as `-M50%`. Similarly, `-M05` is 489 the same as `-M5%`. To limit detection to exact renames, use 490 `-M100%`. The default similarity index is 50%. 491 492-C[<n>]:: 493--find-copies[=<n>]:: 494 Detect copies as well as renames. See also `--find-copies-harder`. 495 If `n` is specified, it has the same meaning as for `-M<n>`. 496 497--find-copies-harder:: 498 For performance reasons, by default, `-C` option finds copies only 499 if the original file of the copy was modified in the same 500 changeset. This flag makes the command 501 inspect unmodified files as candidates for the source of 502 copy. This is a very expensive operation for large 503 projects, so use it with caution. Giving more than one 504 `-C` option has the same effect. 505 506-D:: 507--irreversible-delete:: 508 Omit the preimage for deletes, i.e. print only the header but not 509 the diff between the preimage and `/dev/null`. The resulting patch 510 is not meant to be applied with `patch` or `git apply`; this is 511 solely for people who want to just concentrate on reviewing the 512 text after the change. In addition, the output obviously lacks 513 enough information to apply such a patch in reverse, even manually, 514 hence the name of the option. 515+ 516When used together with `-B`, omit also the preimage in the deletion part 517of a delete/create pair. 518 519-l<num>:: 520 The `-M` and `-C` options require O(n^2) processing time where n 521 is the number of potential rename/copy targets. This 522 option prevents rename/copy detection from running if 523 the number of rename/copy targets exceeds the specified 524 number. 525 526ifndef::git-format-patch[] 527--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: 528 Select only files that are Added (`A`), Copied (`C`), 529 Deleted (`D`), Modified (`M`), Renamed (`R`), have their 530 type (i.e. regular file, symlink, submodule, ...) changed (`T`), 531 are Unmerged (`U`), are 532 Unknown (`X`), or have had their pairing Broken (`B`). 533 Any combination of the filter characters (including none) can be used. 534 When `*` (All-or-none) is added to the combination, all 535 paths are selected if there is any file that matches 536 other criteria in the comparison; if there is no file 537 that matches other criteria, nothing is selected. 538+ 539Also, these upper-case letters can be downcased to exclude. E.g. 540`--diff-filter=ad` excludes added and deleted paths. 541+ 542Note that not all diffs can feature all types. For instance, diffs 543from the index to the working tree can never have Added entries 544(because the set of paths included in the diff is limited by what is in 545the index). Similarly, copied and renamed entries cannot appear if 546detection for those types is disabled. 547 548-S<string>:: 549 Look for differences that change the number of occurrences of 550 the specified string (i.e. addition/deletion) in a file. 551 Intended for the scripter's use. 552+ 553It is useful when you're looking for an exact block of code (like a 554struct), and want to know the history of that block since it first 555came into being: use the feature iteratively to feed the interesting 556block in the preimage back into `-S`, and keep going until you get the 557very first version of the block. 558+ 559Binary files are searched as well. 560 561-G<regex>:: 562 Look for differences whose patch text contains added/removed 563 lines that match <regex>. 564+ 565To illustrate the difference between `-S<regex> --pickaxe-regex` and 566`-G<regex>`, consider a commit with the following diff in the same 567file: 568+ 569---- 570+ return !regexec(regexp, two->ptr, 1, ®match, 0); 571... 572- hit = !regexec(regexp, mf2.ptr, 1, ®match, 0); 573---- 574+ 575While `git log -G"regexec\(regexp"` will show this commit, `git log 576-S"regexec\(regexp" --pickaxe-regex` will not (because the number of 577occurrences of that string did not change). 578+ 579Unless `--text` is supplied patches of binary files without a textconv 580filter will be ignored. 581+ 582See the 'pickaxe' entry in linkgit:gitdiffcore[7] for more 583information. 584 585--find-object=<object-id>:: 586 Look for differences that change the number of occurrences of 587 the specified object. Similar to `-S`, just the argument is different 588 in that it doesn't search for a specific string but for a specific 589 object id. 590+ 591The object can be a blob or a submodule commit. It implies the `-t` option in 592`git-log` to also find trees. 593 594--pickaxe-all:: 595 When `-S` or `-G` finds a change, show all the changes in that 596 changeset, not just the files that contain the change 597 in <string>. 598 599--pickaxe-regex:: 600 Treat the <string> given to `-S` as an extended POSIX regular 601 expression to match. 602 603endif::git-format-patch[] 604 605-O<orderfile>:: 606 Control the order in which files appear in the output. 607 This overrides the `diff.orderFile` configuration variable 608 (see linkgit:git-config[1]). To cancel `diff.orderFile`, 609 use `-O/dev/null`. 610+ 611The output order is determined by the order of glob patterns in 612<orderfile>. 613All files with pathnames that match the first pattern are output 614first, all files with pathnames that match the second pattern (but not 615the first) are output next, and so on. 616All files with pathnames that do not match any pattern are output 617last, as if there was an implicit match-all pattern at the end of the 618file. 619If multiple pathnames have the same rank (they match the same pattern 620but no earlier patterns), their output order relative to each other is 621the normal order. 622+ 623<orderfile> is parsed as follows: 624+ 625-- 626 - Blank lines are ignored, so they can be used as separators for 627 readability. 628 629 - Lines starting with a hash ("`#`") are ignored, so they can be used 630 for comments. Add a backslash ("`\`") to the beginning of the 631 pattern if it starts with a hash. 632 633 - Each other line contains a single pattern. 634-- 635+ 636Patterns have the same syntax and semantics as patterns used for 637fnmatch(3) without the FNM_PATHNAME flag, except a pathname also 638matches a pattern if removing any number of the final pathname 639components matches the pattern. For example, the pattern "`foo*bar`" 640matches "`fooasdfbar`" and "`foo/bar/baz/asdf`" but not "`foobarx`". 641 642ifndef::git-format-patch[] 643-R:: 644 Swap two inputs; that is, show differences from index or 645 on-disk file to tree contents. 646 647--relative[=<path>]:: 648 When run from a subdirectory of the project, it can be 649 told to exclude changes outside the directory and show 650 pathnames relative to it with this option. When you are 651 not in a subdirectory (e.g. in a bare repository), you 652 can name which subdirectory to make the output relative 653 to by giving a <path> as an argument. 654endif::git-format-patch[] 655 656-a:: 657--text:: 658 Treat all files as text. 659 660--ignore-cr-at-eol:: 661 Ignore carriage-return at the end of line when doing a comparison. 662 663--ignore-space-at-eol:: 664 Ignore changes in whitespace at EOL. 665 666-b:: 667--ignore-space-change:: 668 Ignore changes in amount of whitespace. This ignores whitespace 669 at line end, and considers all other sequences of one or 670 more whitespace characters to be equivalent. 671 672-w:: 673--ignore-all-space:: 674 Ignore whitespace when comparing lines. This ignores 675 differences even if one line has whitespace where the other 676 line has none. 677 678--ignore-blank-lines:: 679 Ignore changes whose lines are all blank. 680 681--inter-hunk-context=<lines>:: 682 Show the context between diff hunks, up to the specified number 683 of lines, thereby fusing hunks that are close to each other. 684 Defaults to `diff.interHunkContext` or 0 if the config option 685 is unset. 686 687-W:: 688--function-context:: 689 Show whole surrounding functions of changes. 690 691ifndef::git-format-patch[] 692ifndef::git-log[] 693--exit-code:: 694 Make the program exit with codes similar to diff(1). 695 That is, it exits with 1 if there were differences and 696 0 means no differences. 697 698--quiet:: 699 Disable all output of the program. Implies `--exit-code`. 700endif::git-log[] 701endif::git-format-patch[] 702 703--ext-diff:: 704 Allow an external diff helper to be executed. If you set an 705 external diff driver with linkgit:gitattributes[5], you need 706 to use this option with linkgit:git-log[1] and friends. 707 708--no-ext-diff:: 709 Disallow external diff drivers. 710 711--textconv:: 712--no-textconv:: 713 Allow (or disallow) external text conversion filters to be run 714 when comparing binary files. See linkgit:gitattributes[5] for 715 details. Because textconv filters are typically a one-way 716 conversion, the resulting diff is suitable for human 717 consumption, but cannot be applied. For this reason, textconv 718 filters are enabled by default only for linkgit:git-diff[1] and 719 linkgit:git-log[1], but not for linkgit:git-format-patch[1] or 720 diff plumbing commands. 721 722--ignore-submodules[=<when>]:: 723 Ignore changes to submodules in the diff generation. <when> can be 724 either "none", "untracked", "dirty" or "all", which is the default. 725 Using "none" will consider the submodule modified when it either contains 726 untracked or modified files or its HEAD differs from the commit recorded 727 in the superproject and can be used to override any settings of the 728 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When 729 "untracked" is used submodules are not considered dirty when they only 730 contain untracked content (but they are still scanned for modified 731 content). Using "dirty" ignores all changes to the work tree of submodules, 732 only changes to the commits stored in the superproject are shown (this was 733 the behavior until 1.7.0). Using "all" hides all changes to submodules. 734 735--src-prefix=<prefix>:: 736 Show the given source prefix instead of "a/". 737 738--dst-prefix=<prefix>:: 739 Show the given destination prefix instead of "b/". 740 741--no-prefix:: 742 Do not show any source or destination prefix. 743 744--line-prefix=<prefix>:: 745 Prepend an additional prefix to every line of output. 746 747--ita-invisible-in-index:: 748 By default entries added by "git add -N" appear as an existing 749 empty file in "git diff" and a new file in "git diff --cached". 750 This option makes the entry appear as a new file in "git diff" 751 and non-existent in "git diff --cached". This option could be 752 reverted with `--ita-visible-in-index`. Both options are 753 experimental and could be removed in future. 754 755For more detailed explanation on these common options, see also 756linkgit:gitdiffcore[7].