1// Please don't remove this comment as asciidoc behaves badly when 2// the first non-empty line is ifdef/ifndef. The symptom is that 3// without this comment the <git-diff-core> attribute conditionally 4// defined below ends up being defined unconditionally. 5// Last checked with asciidoc 7.0.2. 6 7ifndef::git-format-patch[] 8ifndef::git-diff[] 9ifndef::git-log[] 10:git-diff-core: 1 11endif::git-log[] 12endif::git-diff[] 13endif::git-format-patch[] 14 15ifdef::git-format-patch[] 16-p:: 17--no-stat:: 18 Generate plain patches without any diffstats. 19endif::git-format-patch[] 20 21ifndef::git-format-patch[] 22-p:: 23-u:: 24--patch:: 25 Generate patch (see section on generating patches). 26 {git-diff? This is the default.} 27endif::git-format-patch[] 28 29-U<n>:: 30--unified=<n>:: 31 Generate diffs with <n> lines of context instead of 32 the usual three. 33ifndef::git-format-patch[] 34 Implies `-p`. 35endif::git-format-patch[] 36 37ifndef::git-format-patch[] 38--raw:: 39 Generate the raw format. 40 {git-diff-core? This is the default.} 41endif::git-format-patch[] 42 43ifndef::git-format-patch[] 44--patch-with-raw:: 45 Synonym for `-p --raw`. 46endif::git-format-patch[] 47 48--minimal:: 49 Spend extra time to make sure the smallest possible 50 diff is produced. 51 52--patience:: 53 Generate a diff using the "patience diff" algorithm. 54 55--histogram:: 56 Generate a diff using the "histogram diff" algorithm. 57 58--stat[=<width>[,<name-width>[,<count>]]]:: 59 Generate a diffstat. By default, as much space as necessary 60 will be used for the filename part, and the rest for the graph 61 part. Maximum width defaults to terminal width, or 80 columns 62 if not connected to a terminal, and can be overridden by 63 `<width>`. The width of the filename part can be limited by 64 giving another width `<name-width>` after a comma. The width 65 of the graph part can be limited by using 66 `--stat-graph-width=<width>` (affects all commands generating 67 a stat graph) or by setting `diff.statGraphWidth=<width>` 68 (does not affect `git format-patch`). 69 By giving a third parameter `<count>`, you can limit the 70 output to the first `<count>` lines, followed by `...` if 71 there are more. 72+ 73These parameters can also be set individually with `--stat-width=<width>`, 74`--stat-name-width=<name-width>` and `--stat-count=<count>`. 75 76--numstat:: 77 Similar to `--stat`, but shows number of added and 78 deleted lines in decimal notation and pathname without 79 abbreviation, to make it more machine friendly. For 80 binary files, outputs two `-` instead of saying 81 `0 0`. 82 83--shortstat:: 84 Output only the last line of the `--stat` format containing total 85 number of modified files, as well as number of added and deleted 86 lines. 87 88--dirstat[=<param1,param2,...>]:: 89 Output the distribution of relative amount of changes for each 90 sub-directory. The behavior of `--dirstat` can be customized by 91 passing it a comma separated list of parameters. 92 The defaults are controlled by the `diff.dirstat` configuration 93 variable (see linkgit:git-config[1]). 94 The following parameters are available: 95+ 96-- 97`changes`;; 98 Compute the dirstat numbers by counting the lines that have been 99 removed from the source, or added to the destination. This ignores 100 the amount of pure code movements within a file. In other words, 101 rearranging lines in a file is not counted as much as other changes. 102 This is the default behavior when no parameter is given. 103`lines`;; 104 Compute the dirstat numbers by doing the regular line-based diff 105 analysis, and summing the removed/added line counts. (For binary 106 files, count 64-byte chunks instead, since binary files have no 107 natural concept of lines). This is a more expensive `--dirstat` 108 behavior than the `changes` behavior, but it does count rearranged 109 lines within a file as much as other changes. The resulting output 110 is consistent with what you get from the other `--*stat` options. 111`files`;; 112 Compute the dirstat numbers by counting the number of files changed. 113 Each changed file counts equally in the dirstat analysis. This is 114 the computationally cheapest `--dirstat` behavior, since it does 115 not have to look at the file contents at all. 116`cumulative`;; 117 Count changes in a child directory for the parent directory as well. 118 Note that when using `cumulative`, the sum of the percentages 119 reported may exceed 100%. The default (non-cumulative) behavior can 120 be specified with the `noncumulative` parameter. 121<limit>;; 122 An integer parameter specifies a cut-off percent (3% by default). 123 Directories contributing less than this percentage of the changes 124 are not shown in the output. 125-- 126+ 127Example: The following will count changed files, while ignoring 128directories with less than 10% of the total amount of changed files, 129and accumulating child directory counts in the parent directories: 130`--dirstat=files,10,cumulative`. 131 132--summary:: 133 Output a condensed summary of extended header information 134 such as creations, renames and mode changes. 135 136ifndef::git-format-patch[] 137--patch-with-stat:: 138 Synonym for `-p --stat`. 139endif::git-format-patch[] 140 141ifndef::git-format-patch[] 142 143-z:: 144ifdef::git-log[] 145 Separate the commits with NULs instead of with new newlines. 146+ 147Also, when `--raw` or `--numstat` has been given, do not munge 148pathnames and use NULs as output field terminators. 149endif::git-log[] 150ifndef::git-log[] 151 When `--raw`, `--numstat`, `--name-only` or `--name-status` has been 152 given, do not munge pathnames and use NULs as output field terminators. 153endif::git-log[] 154+ 155Without this option, each pathname output will have TAB, LF, double quotes, 156and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, 157respectively, and the pathname will be enclosed in double quotes if 158any of those replacements occurred. 159 160--name-only:: 161 Show only names of changed files. 162 163--name-status:: 164 Show only names and status of changed files. See the description 165 of the `--diff-filter` option on what the status letters mean. 166 167--submodule[=<format>]:: 168 Specify how differences in submodules are shown. When `--submodule` 169 or `--submodule=log` is given, the 'log' format is used. This format lists 170 the commits in the range like linkgit:git-submodule[1] `summary` does. 171 Omitting the `--submodule` option or specifying `--submodule=short`, 172 uses the 'short' format. This format just shows the names of the commits 173 at the beginning and end of the range. Can be tweaked via the 174 `diff.submodule` configuration variable. 175 176--color[=<when>]:: 177 Show colored diff. 178 The value must be `always` (the default for `<when>`), `never`, or `auto`. 179 The default value is `never`. 180ifdef::git-diff[] 181 It can be changed by the `color.ui` and `color.diff` 182 configuration settings. 183endif::git-diff[] 184 185--no-color:: 186 Turn off colored diff. 187ifdef::git-diff[] 188 This can be used to override configuration settings. 189endif::git-diff[] 190 It is the same as `--color=never`. 191 192--word-diff[=<mode>]:: 193 Show a word diff, using the <mode> to delimit changed words. 194 By default, words are delimited by whitespace; see 195 `--word-diff-regex` below. The <mode> defaults to 'plain', and 196 must be one of: 197+ 198-- 199color:: 200 Highlight changed words using only colors. Implies `--color`. 201plain:: 202 Show words as `[-removed-]` and `{+added+}`. Makes no 203 attempts to escape the delimiters if they appear in the input, 204 so the output may be ambiguous. 205porcelain:: 206 Use a special line-based format intended for script 207 consumption. Added/removed/unchanged runs are printed in the 208 usual unified diff format, starting with a `+`/`-`/` ` 209 character at the beginning of the line and extending to the 210 end of the line. Newlines in the input are represented by a 211 tilde `~` on a line of its own. 212none:: 213 Disable word diff again. 214-- 215+ 216Note that despite the name of the first mode, color is used to 217highlight the changed parts in all modes if enabled. 218 219--word-diff-regex=<regex>:: 220 Use <regex> to decide what a word is, instead of considering 221 runs of non-whitespace to be a word. Also implies 222 `--word-diff` unless it was already enabled. 223+ 224Every non-overlapping match of the 225<regex> is considered a word. Anything between these matches is 226considered whitespace and ignored(!) for the purposes of finding 227differences. You may want to append `|[^[:space:]]` to your regular 228expression to make sure that it matches all non-whitespace characters. 229A match that contains a newline is silently truncated(!) at the 230newline. 231+ 232The regex can also be set via a diff driver or configuration option, see 233linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly 234overrides any diff driver or configuration setting. Diff drivers 235override configuration settings. 236 237--color-words[=<regex>]:: 238 Equivalent to `--word-diff=color` plus (if a regex was 239 specified) `--word-diff-regex=<regex>`. 240endif::git-format-patch[] 241 242--no-renames:: 243 Turn off rename detection, even when the configuration 244 file gives the default to do so. 245 246ifndef::git-format-patch[] 247--check:: 248 Warn if changes introduce whitespace errors. What are 249 considered whitespace errors is controlled by `core.whitespace` 250 configuration. By default, trailing whitespaces (including 251 lines that solely consist of whitespaces) and a space character 252 that is immediately followed by a tab character inside the 253 initial indent of the line are considered whitespace errors. 254 Exits with non-zero status if problems are found. Not compatible 255 with --exit-code. 256endif::git-format-patch[] 257 258--full-index:: 259 Instead of the first handful of characters, show the full 260 pre- and post-image blob object names on the "index" 261 line when generating patch format output. 262 263--binary:: 264 In addition to `--full-index`, output a binary diff that 265 can be applied with `git-apply`. 266 267--abbrev[=<n>]:: 268 Instead of showing the full 40-byte hexadecimal object 269 name in diff-raw format output and diff-tree header 270 lines, show only a partial prefix. This is 271 independent of the `--full-index` option above, which controls 272 the diff-patch output format. Non default number of 273 digits can be specified with `--abbrev=<n>`. 274 275-B[<n>][/<m>]:: 276--break-rewrites[=[<n>][/<m>]]:: 277 Break complete rewrite changes into pairs of delete and 278 create. This serves two purposes: 279+ 280It affects the way a change that amounts to a total rewrite of a file 281not as a series of deletion and insertion mixed together with a very 282few lines that happen to match textually as the context, but as a 283single deletion of everything old followed by a single insertion of 284everything new, and the number `m` controls this aspect of the -B 285option (defaults to 60%). `-B/70%` specifies that less than 30% of the 286original should remain in the result for git to consider it a total 287rewrite (i.e. otherwise the resulting patch will be a series of 288deletion and insertion mixed together with context lines). 289+ 290When used with -M, a totally-rewritten file is also considered as the 291source of a rename (usually -M only considers a file that disappeared 292as the source of a rename), and the number `n` controls this aspect of 293the -B option (defaults to 50%). `-B20%` specifies that a change with 294addition and deletion compared to 20% or more of the file's size are 295eligible for being picked up as a possible source of a rename to 296another file. 297 298-M[<n>]:: 299--find-renames[=<n>]:: 300ifndef::git-log[] 301 Detect renames. 302endif::git-log[] 303ifdef::git-log[] 304 If generating diffs, detect and report renames for each commit. 305 For following files across renames while traversing history, see 306 `--follow`. 307endif::git-log[] 308 If `n` is specified, it is a threshold on the similarity 309 index (i.e. amount of addition/deletions compared to the 310 file's size). For example, `-M90%` means git should consider a 311 delete/add pair to be a rename if more than 90% of the file 312 hasn't changed. Without a `%` sign, the number is to be read as 313 a fraction, with a decimal point before it. I.e., `-M5` becomes 314 0.5, and is thus the same as `-M50%`. Similarly, `-M05` is 315 the same as `-M5%`. To limit detection to exact renames, use 316 `-M100%`. 317 318-C[<n>]:: 319--find-copies[=<n>]:: 320 Detect copies as well as renames. See also `--find-copies-harder`. 321 If `n` is specified, it has the same meaning as for `-M<n>`. 322 323--find-copies-harder:: 324 For performance reasons, by default, `-C` option finds copies only 325 if the original file of the copy was modified in the same 326 changeset. This flag makes the command 327 inspect unmodified files as candidates for the source of 328 copy. This is a very expensive operation for large 329 projects, so use it with caution. Giving more than one 330 `-C` option has the same effect. 331 332-D:: 333--irreversible-delete:: 334 Omit the preimage for deletes, i.e. print only the header but not 335 the diff between the preimage and `/dev/null`. The resulting patch 336 is not meant to be applied with `patch` nor `git apply`; this is 337 solely for people who want to just concentrate on reviewing the 338 text after the change. In addition, the output obviously lack 339 enough information to apply such a patch in reverse, even manually, 340 hence the name of the option. 341+ 342When used together with `-B`, omit also the preimage in the deletion part 343of a delete/create pair. 344 345-l<num>:: 346 The `-M` and `-C` options require O(n^2) processing time where n 347 is the number of potential rename/copy targets. This 348 option prevents rename/copy detection from running if 349 the number of rename/copy targets exceeds the specified 350 number. 351 352ifndef::git-format-patch[] 353--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: 354 Select only files that are Added (`A`), Copied (`C`), 355 Deleted (`D`), Modified (`M`), Renamed (`R`), have their 356 type (i.e. regular file, symlink, submodule, ...) changed (`T`), 357 are Unmerged (`U`), are 358 Unknown (`X`), or have had their pairing Broken (`B`). 359 Any combination of the filter characters (including none) can be used. 360 When `*` (All-or-none) is added to the combination, all 361 paths are selected if there is any file that matches 362 other criteria in the comparison; if there is no file 363 that matches other criteria, nothing is selected. 364 365-S<string>:: 366 Look for differences that introduce or remove an instance of 367 <string>. Note that this is different than the string simply 368 appearing in diff output; see the 'pickaxe' entry in 369 linkgit:gitdiffcore[7] for more details. 370 371-G<regex>:: 372 Look for differences whose added or removed line matches 373 the given <regex>. 374 375--pickaxe-all:: 376 When `-S` or `-G` finds a change, show all the changes in that 377 changeset, not just the files that contain the change 378 in <string>. 379 380--pickaxe-regex:: 381 Make the <string> not a plain string but an extended POSIX 382 regex to match. 383endif::git-format-patch[] 384 385-O<orderfile>:: 386 Output the patch in the order specified in the 387 <orderfile>, which has one shell glob pattern per line. 388 389ifndef::git-format-patch[] 390-R:: 391 Swap two inputs; that is, show differences from index or 392 on-disk file to tree contents. 393 394--relative[=<path>]:: 395 When run from a subdirectory of the project, it can be 396 told to exclude changes outside the directory and show 397 pathnames relative to it with this option. When you are 398 not in a subdirectory (e.g. in a bare repository), you 399 can name which subdirectory to make the output relative 400 to by giving a <path> as an argument. 401endif::git-format-patch[] 402 403-a:: 404--text:: 405 Treat all files as text. 406 407--ignore-space-at-eol:: 408 Ignore changes in whitespace at EOL. 409 410-b:: 411--ignore-space-change:: 412 Ignore changes in amount of whitespace. This ignores whitespace 413 at line end, and considers all other sequences of one or 414 more whitespace characters to be equivalent. 415 416-w:: 417--ignore-all-space:: 418 Ignore whitespace when comparing lines. This ignores 419 differences even if one line has whitespace where the other 420 line has none. 421 422--inter-hunk-context=<lines>:: 423 Show the context between diff hunks, up to the specified number 424 of lines, thereby fusing hunks that are close to each other. 425 426-W:: 427--function-context:: 428 Show whole surrounding functions of changes. 429 430ifndef::git-format-patch[] 431ifndef::git-log[] 432--exit-code:: 433 Make the program exit with codes similar to diff(1). 434 That is, it exits with 1 if there were differences and 435 0 means no differences. 436 437--quiet:: 438 Disable all output of the program. Implies `--exit-code`. 439endif::git-log[] 440endif::git-format-patch[] 441 442--ext-diff:: 443 Allow an external diff helper to be executed. If you set an 444 external diff driver with linkgit:gitattributes[5], you need 445 to use this option with linkgit:git-log[1] and friends. 446 447--no-ext-diff:: 448 Disallow external diff drivers. 449 450--textconv:: 451--no-textconv:: 452 Allow (or disallow) external text conversion filters to be run 453 when comparing binary files. See linkgit:gitattributes[5] for 454 details. Because textconv filters are typically a one-way 455 conversion, the resulting diff is suitable for human 456 consumption, but cannot be applied. For this reason, textconv 457 filters are enabled by default only for linkgit:git-diff[1] and 458 linkgit:git-log[1], but not for linkgit:git-format-patch[1] or 459 diff plumbing commands. 460 461--ignore-submodules[=<when>]:: 462 Ignore changes to submodules in the diff generation. <when> can be 463 either "none", "untracked", "dirty" or "all", which is the default 464 Using "none" will consider the submodule modified when it either contains 465 untracked or modified files or its HEAD differs from the commit recorded 466 in the superproject and can be used to override any settings of the 467 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When 468 "untracked" is used submodules are not considered dirty when they only 469 contain untracked content (but they are still scanned for modified 470 content). Using "dirty" ignores all changes to the work tree of submodules, 471 only changes to the commits stored in the superproject are shown (this was 472 the behavior until 1.7.0). Using "all" hides all changes to submodules. 473 474--src-prefix=<prefix>:: 475 Show the given source prefix instead of "a/". 476 477--dst-prefix=<prefix>:: 478 Show the given destination prefix instead of "b/". 479 480--no-prefix:: 481 Do not show any source or destination prefix. 482 483For more detailed explanation on these common options, see also 484linkgit:gitdiffcore[7].