INSTALLon commit l10n: ko.po: Update Korean translation (4a7e1b2)
   1
   2                Git installation
   3
   4Normally you can just do "make" followed by "make install", and that
   5will install the git programs in your own ~/bin/ directory.  If you want
   6to do a global install, you can do
   7
   8        $ make prefix=/usr all doc info ;# as yourself
   9        # make prefix=/usr install install-doc install-html install-info ;# as root
  10
  11(or prefix=/usr/local, of course).  Just like any program suite
  12that uses $prefix, the built results have some paths encoded,
  13which are derived from $prefix, so "make all; make prefix=/usr
  14install" would not work.
  15
  16The beginning of the Makefile documents many variables that affect the way
  17git is built.  You can override them either from the command line, or in a
  18config.mak file.
  19
  20Alternatively you can use autoconf generated ./configure script to
  21set up install paths (via config.mak.autogen), so you can write instead
  22
  23        $ make configure ;# as yourself
  24        $ ./configure --prefix=/usr ;# as yourself
  25        $ make all doc ;# as yourself
  26        # make install install-doc install-html;# as root
  27
  28If you're willing to trade off (much) longer build time for a later
  29faster git you can also do a profile feedback build with
  30
  31        $ make prefix=/usr profile
  32        # make prefix=/usr PROFILE=BUILD install
  33
  34This will run the complete test suite as training workload and then
  35rebuild git with the generated profile feedback. This results in a git
  36which is a few percent faster on CPU intensive workloads.  This
  37may be a good tradeoff for distribution packagers.
  38
  39Alternatively you can run profile feedback only with the git benchmark
  40suite. This runs significantly faster than the full test suite, but
  41has less coverage:
  42
  43        $ make prefix=/usr profile-fast
  44        # make prefix=/usr PROFILE=BUILD install
  45
  46Or if you just want to install a profile-optimized version of git into
  47your home directory, you could run:
  48
  49        $ make profile-install
  50
  51or
  52        $ make profile-fast-install
  53
  54As a caveat: a profile-optimized build takes a *lot* longer since the
  55git tree must be built twice, and in order for the profiling
  56measurements to work properly, ccache must be disabled and the test
  57suite has to be run using only a single CPU.  In addition, the profile
  58feedback build stage currently generates a lot of additional compiler
  59warnings.
  60
  61Issues of note:
  62
  63 - Ancient versions of GNU Interactive Tools (pre-4.9.2) installed a
  64   program "git", whose name conflicts with this program.  But with
  65   version 4.9.2, after long hiatus without active maintenance (since
  66   around 1997), it changed its name to gnuit and the name conflict is no
  67   longer a problem.
  68
  69   NOTE: When compiled with backward compatibility option, the GNU
  70   Interactive Tools package still can install "git", but you can build it
  71   with --disable-transition option to avoid this.
  72
  73 - You can use git after building but without installing if you want
  74   to test drive it.  Simply run git found in bin-wrappers directory
  75   in the build directory, or prepend that directory to your $PATH.
  76   This however is less efficient than running an installed git, as
  77   you always need an extra fork+exec to run any git subcommand.
  78
  79   It is still possible to use git without installing by setting a few
  80   environment variables, which was the way this was done
  81   traditionally.  But using git found in bin-wrappers directory in
  82   the build directory is far simpler.  As a historical reference, the
  83   old way went like this:
  84
  85        GIT_EXEC_PATH=`pwd`
  86        PATH=`pwd`:$PATH
  87        GITPERLLIB=`pwd`/perl/blib/lib
  88        export GIT_EXEC_PATH PATH GITPERLLIB
  89
  90 - Git is reasonably self-sufficient, but does depend on a few external
  91   programs and libraries.  Git can be used without most of them by adding
  92   the approriate "NO_<LIBRARY>=YesPlease" to the make command line or
  93   config.mak file.
  94
  95        - "zlib", the compression library. Git won't build without it.
  96
  97        - "ssh" is used to push and pull over the net.
  98
  99        - A POSIX-compliant shell is required to run many scripts needed
 100          for everyday use (e.g. "bisect", "pull").
 101
 102        - "Perl" version 5.8 or later is needed to use some of the
 103          features (e.g. preparing a partial commit using "git add -i/-p",
 104          interacting with svn repositories with "git svn").  If you can
 105          live without these, use NO_PERL.  Note that recent releases of
 106          Redhat/Fedora are reported to ship Perl binary package with some
 107          core modules stripped away (see http://lwn.net/Articles/477234/),
 108          so you might need to install additional packages other than Perl
 109          itself, e.g. Time::HiRes.
 110
 111        - git-imap-send needs the OpenSSL library to talk IMAP over SSL if
 112          you are using libcurl older than 7.34.0.  Otherwise you can use
 113          NO_OPENSSL without losing git-imap-send.
 114
 115          By default, git uses OpenSSL for SHA1 but it will use its own
 116          library (inspired by Mozilla's) with either NO_OPENSSL or
 117          BLK_SHA1.  Also included is a version optimized for PowerPC
 118          (PPC_SHA1).
 119
 120        - "libcurl" library is used by git-http-fetch, git-fetch, and, if
 121          the curl version >= 7.34.0, for git-imap-send.  You might also
 122          want the "curl" executable for debugging purposes. If you do not
 123          use http:// or https:// repositories, and do not want to put
 124          patches into an IMAP mailbox, you do not have to have them
 125          (use NO_CURL).
 126
 127        - "expat" library; git-http-push uses it for remote lock
 128          management over DAV.  Similar to "curl" above, this is optional
 129          (with NO_EXPAT).
 130
 131        - "wish", the Tcl/Tk windowing shell is used in gitk to show the
 132          history graphically, and in git-gui.  If you don't want gitk or
 133          git-gui, you can use NO_TCLTK.
 134
 135        - A gettext library is used by default for localizing Git. The
 136          primary target is GNU libintl, but the Solaris gettext
 137          implementation also works.
 138
 139          We need a gettext.h on the system for C code, gettext.sh (or
 140          Solaris gettext(1)) for shell scripts, and libintl-perl for Perl
 141          programs.
 142
 143          Set NO_GETTEXT to disable localization support and make Git only
 144          use English. Under autoconf the configure script will do this
 145          automatically if it can't find libintl on the system.
 146
 147        - Python version 2.4 or later (but not 3.x, which is not
 148          supported by Perforce) is needed to use the git-p4 interface
 149          to Perforce.
 150
 151 - Some platform specific issues are dealt with Makefile rules,
 152   but depending on your specific installation, you may not
 153   have all the libraries/tools needed, or you may have
 154   necessary libraries at unusual locations.  Please look at the
 155   top of the Makefile to see what can be adjusted for your needs.
 156   You can place local settings in config.mak and the Makefile
 157   will include them.  Note that config.mak is not distributed;
 158   the name is reserved for local settings.
 159
 160 - To build and install documentation suite, you need to have
 161   the asciidoc/xmlto toolchain.  Because not many people are
 162   inclined to install the tools, the default build target
 163   ("make all") does _not_ build them.
 164
 165   "make doc" builds documentation in man and html formats; there are
 166   also "make man", "make html" and "make info". Note that "make html"
 167   requires asciidoc, but not xmlto. "make man" (and thus make doc)
 168   requires both.
 169
 170   "make install-doc" installs documentation in man format only; there
 171   are also "make install-man", "make install-html" and "make
 172   install-info".
 173
 174   Building and installing the info file additionally requires
 175   makeinfo and docbook2X.  Version 0.8.3 is known to work.
 176
 177   Building and installing the pdf file additionally requires
 178   dblatex.  Version >= 0.2.7 is known to work.
 179
 180   All formats require at least asciidoc 8.4.1.
 181
 182   There are also "make quick-install-doc", "make quick-install-man"
 183   and "make quick-install-html" which install preformatted man pages
 184   and html documentation. To use these build targets, you need to
 185   clone two separate git-htmldocs and git-manpages repositories next
 186   to the clone of git itself.
 187
 188   It has been reported that docbook-xsl version 1.72 and 1.73 are
 189   buggy; 1.72 misformats manual pages for callouts, and 1.73 needs
 190   the patch in contrib/patches/docbook-xsl-manpages-charmap.patch
 191
 192   Users attempting to build the documentation on Cygwin may need to ensure
 193   that the /etc/xml/catalog file looks something like this:
 194
 195   <?xml version="1.0"?>
 196   <!DOCTYPE catalog PUBLIC
 197      "-//OASIS//DTD Entity Resolution XML Catalog V1.0//EN"
 198      "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd"
 199   >
 200   <catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
 201     <rewriteURI
 202       uriStartString = "http://docbook.sourceforge.net/release/xsl/current"
 203       rewritePrefix = "/usr/share/sgml/docbook/xsl-stylesheets"
 204     />
 205     <rewriteURI
 206       uriStartString="http://www.oasis-open.org/docbook/xml/4.5"
 207       rewritePrefix="/usr/share/sgml/docbook/xml-dtd-4.5"
 208     />
 209  </catalog>
 210
 211  This can be achieved with the following two xmlcatalog commands:
 212
 213  xmlcatalog --noout \
 214     --add rewriteURI \
 215        http://docbook.sourceforge.net/release/xsl/current \
 216        /usr/share/sgml/docbook/xsl-stylesheets \
 217     /etc/xml/catalog
 218
 219  xmlcatalog --noout \
 220     --add rewriteURI \
 221         http://www.oasis-open.org/docbook/xml/4.5/xsl/current \
 222         /usr/share/sgml/docbook/xml-dtd-4.5 \
 223     /etc/xml/catalog