1Commit Limiting 2~~~~~~~~~~~~~~~ 3 4Besides specifying a range of commits that should be listed using the 5special notations explained in the description, additional commit 6limiting may be applied. 7 8Using more options generally further limits the output (e.g. 9`--since=<date1>` limits to commits newer than `<date1>`, and using it 10with `--grep=<pattern>` further limits to commits whose log message 11has a line that matches `<pattern>`), unless otherwise noted. 12 13Note that these are applied before commit 14ordering and formatting options, such as `--reverse`. 15 16-- 17 18-<number>:: 19-n <number>:: 20--max-count=<number>:: 21 Limit the number of commits to output. 22 23--skip=<number>:: 24 Skip 'number' commits before starting to show the commit output. 25 26--since=<date>:: 27--after=<date>:: 28 Show commits more recent than a specific date. 29 30--until=<date>:: 31--before=<date>:: 32 Show commits older than a specific date. 33 34ifdef::git-rev-list[] 35--max-age=<timestamp>:: 36--min-age=<timestamp>:: 37 Limit the commits output to specified time range. 38endif::git-rev-list[] 39 40--author=<pattern>:: 41--committer=<pattern>:: 42 Limit the commits output to ones with author/committer 43 header lines that match the specified pattern (regular 44 expression). With more than one `--author=<pattern>`, 45 commits whose author matches any of the given patterns are 46 chosen (similarly for multiple `--committer=<pattern>`). 47 48--grep-reflog=<pattern>:: 49 Limit the commits output to ones with reflog entries that 50 match the specified pattern (regular expression). With 51 more than one `--grep-reflog`, commits whose reflog message 52 matches any of the given patterns are chosen. It is an 53 error to use this option unless `--walk-reflogs` is in use. 54 55--grep=<pattern>:: 56 Limit the commits output to ones with log message that 57 matches the specified pattern (regular expression). With 58 more than one `--grep=<pattern>`, commits whose message 59 matches any of the given patterns are chosen (but see 60 `--all-match`). 61ifndef::git-rev-list[] 62+ 63When `--show-notes` is in effect, the message from the notes is 64matched as if it were part of the log message. 65endif::git-rev-list[] 66 67--all-match:: 68 Limit the commits output to ones that match all given `--grep`, 69 instead of ones that match at least one. 70 71--invert-grep:: 72 Limit the commits output to ones with log message that do not 73 match the pattern specified with `--grep=<pattern>`. 74 75-i:: 76--regexp-ignore-case:: 77 Match the regular expression limiting patterns without regard to letter 78 case. 79 80--basic-regexp:: 81 Consider the limiting patterns to be basic regular expressions; 82 this is the default. 83 84-E:: 85--extended-regexp:: 86 Consider the limiting patterns to be extended regular expressions 87 instead of the default basic regular expressions. 88 89-F:: 90--fixed-strings:: 91 Consider the limiting patterns to be fixed strings (don't interpret 92 pattern as a regular expression). 93 94--perl-regexp:: 95 Consider the limiting patterns to be Perl-compatible regular expressions. 96 Requires libpcre to be compiled in. 97 98--remove-empty:: 99 Stop when a given path disappears from the tree. 100 101--merges:: 102 Print only merge commits. This is exactly the same as `--min-parents=2`. 103 104--no-merges:: 105 Do not print commits with more than one parent. This is 106 exactly the same as `--max-parents=1`. 107 108--min-parents=<number>:: 109--max-parents=<number>:: 110--no-min-parents:: 111--no-max-parents:: 112 Show only commits which have at least (or at most) that many parent 113 commits. In particular, `--max-parents=1` is the same as `--no-merges`, 114 `--min-parents=2` is the same as `--merges`. `--max-parents=0` 115 gives all root commits and `--min-parents=3` all octopus merges. 116+ 117`--no-min-parents` and `--no-max-parents` reset these limits (to no limit) 118again. Equivalent forms are `--min-parents=0` (any commit has 0 or more 119parents) and `--max-parents=-1` (negative numbers denote no upper limit). 120 121--first-parent:: 122 Follow only the first parent commit upon seeing a merge 123 commit. This option can give a better overview when 124 viewing the evolution of a particular topic branch, 125 because merges into a topic branch tend to be only about 126 adjusting to updated upstream from time to time, and 127 this option allows you to ignore the individual commits 128 brought in to your history by such a merge. Cannot be 129 combined with --bisect. 130 131--not:: 132 Reverses the meaning of the '{caret}' prefix (or lack thereof) 133 for all following revision specifiers, up to the next `--not`. 134 135--all:: 136 Pretend as if all the refs in `refs/` are listed on the 137 command line as '<commit>'. 138 139--branches[=<pattern>]:: 140 Pretend as if all the refs in `refs/heads` are listed 141 on the command line as '<commit>'. If '<pattern>' is given, limit 142 branches to ones matching given shell glob. If pattern lacks '?', 143 '{asterisk}', or '[', '/{asterisk}' at the end is implied. 144 145--tags[=<pattern>]:: 146 Pretend as if all the refs in `refs/tags` are listed 147 on the command line as '<commit>'. If '<pattern>' is given, limit 148 tags to ones matching given shell glob. If pattern lacks '?', '{asterisk}', 149 or '[', '/{asterisk}' at the end is implied. 150 151--remotes[=<pattern>]:: 152 Pretend as if all the refs in `refs/remotes` are listed 153 on the command line as '<commit>'. If '<pattern>' is given, limit 154 remote-tracking branches to ones matching given shell glob. 155 If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. 156 157--glob=<glob-pattern>:: 158 Pretend as if all the refs matching shell glob '<glob-pattern>' 159 are listed on the command line as '<commit>'. Leading 'refs/', 160 is automatically prepended if missing. If pattern lacks '?', '{asterisk}', 161 or '[', '/{asterisk}' at the end is implied. 162 163--exclude=<glob-pattern>:: 164 165 Do not include refs matching '<glob-pattern>' that the next `--all`, 166 `--branches`, `--tags`, `--remotes`, or `--glob` would otherwise 167 consider. Repetitions of this option accumulate exclusion patterns 168 up to the next `--all`, `--branches`, `--tags`, `--remotes`, or 169 `--glob` option (other options or arguments do not clear 170 accumulated patterns). 171+ 172The patterns given should not begin with `refs/heads`, `refs/tags`, or 173`refs/remotes` when applied to `--branches`, `--tags`, or `--remotes`, 174respectively, and they must begin with `refs/` when applied to `--glob` 175or `--all`. If a trailing '/{asterisk}' is intended, it must be given 176explicitly. 177 178--reflog:: 179 Pretend as if all objects mentioned by reflogs are listed on the 180 command line as `<commit>`. 181 182--ignore-missing:: 183 Upon seeing an invalid object name in the input, pretend as if 184 the bad input was not given. 185 186ifndef::git-rev-list[] 187--bisect:: 188 Pretend as if the bad bisection ref `refs/bisect/bad` 189 was listed and as if it was followed by `--not` and the good 190 bisection refs `refs/bisect/good-*` on the command 191 line. Cannot be combined with --first-parent. 192endif::git-rev-list[] 193 194--stdin:: 195 In addition to the '<commit>' listed on the command 196 line, read them from the standard input. If a '--' separator is 197 seen, stop reading commits and start reading paths to limit the 198 result. 199 200ifdef::git-rev-list[] 201--quiet:: 202 Don't print anything to standard output. This form 203 is primarily meant to allow the caller to 204 test the exit status to see if a range of objects is fully 205 connected (or not). It is faster than redirecting stdout 206 to `/dev/null` as the output does not have to be formatted. 207endif::git-rev-list[] 208 209--cherry-mark:: 210 Like `--cherry-pick` (see below) but mark equivalent commits 211 with `=` rather than omitting them, and inequivalent ones with `+`. 212 213--cherry-pick:: 214 Omit any commit that introduces the same change as 215 another commit on the ``other side'' when the set of 216 commits are limited with symmetric difference. 217+ 218For example, if you have two branches, `A` and `B`, a usual way 219to list all commits on only one side of them is with 220`--left-right` (see the example below in the description of 221the `--left-right` option). However, it shows the commits that were 222cherry-picked from the other branch (for example, ``3rd on b'' may be 223cherry-picked from branch A). With this option, such pairs of commits are 224excluded from the output. 225 226--left-only:: 227--right-only:: 228 List only commits on the respective side of a symmetric range, 229 i.e. only those which would be marked `<` resp. `>` by 230 `--left-right`. 231+ 232For example, `--cherry-pick --right-only A...B` omits those 233commits from `B` which are in `A` or are patch-equivalent to a commit in 234`A`. In other words, this lists the `+` commits from `git cherry A B`. 235More precisely, `--cherry-pick --right-only --no-merges` gives the exact 236list. 237 238--cherry:: 239 A synonym for `--right-only --cherry-mark --no-merges`; useful to 240 limit the output to the commits on our side and mark those that 241 have been applied to the other side of a forked history with 242 `git log --cherry upstream...mybranch`, similar to 243 `git cherry upstream mybranch`. 244 245-g:: 246--walk-reflogs:: 247 Instead of walking the commit ancestry chain, walk 248 reflog entries from the most recent one to older ones. 249 When this option is used you cannot specify commits to 250 exclude (that is, '{caret}commit', 'commit1..commit2', 251 and 'commit1\...commit2' notations cannot be used). 252+ 253With `--pretty` format other than `oneline` (for obvious reasons), 254this causes the output to have two extra lines of information 255taken from the reflog. The reflog designator in the output may be shown 256as `ref@{Nth}` (where `Nth` is the reverse-chronological index in the 257reflog) or as `ref@{timestamp}` (with the timestamp for that entry), 258depending on a few rules: 259+ 260-- 2611. If the starting point is specified as `ref@{Nth}`, show the index 262format. 263+ 2642. If the starting point was specified as `ref@{now}`, show the 265timestamp format. 266+ 2673. If neither was used, but `--date` was given on the command line, show 268the timestamp in the format requested by `--date`. 269+ 2704. Otherwise, show the index format. 271-- 272+ 273Under `--pretty=oneline`, the commit message is 274prefixed with this information on the same line. 275This option cannot be combined with `--reverse`. 276See also linkgit:git-reflog[1]. 277 278--merge:: 279 After a failed merge, show refs that touch files having a 280 conflict and don't exist on all heads to merge. 281 282--boundary:: 283 Output excluded boundary commits. Boundary commits are 284 prefixed with `-`. 285 286ifdef::git-rev-list[] 287--use-bitmap-index:: 288 289 Try to speed up the traversal using the pack bitmap index (if 290 one is available). Note that when traversing with `--objects`, 291 trees and blobs will not have their associated path printed. 292endif::git-rev-list[] 293 294-- 295 296History Simplification 297~~~~~~~~~~~~~~~~~~~~~~ 298 299Sometimes you are only interested in parts of the history, for example the 300commits modifying a particular <path>. But there are two parts of 301'History Simplification', one part is selecting the commits and the other 302is how to do it, as there are various strategies to simplify the history. 303 304The following options select the commits to be shown: 305 306<paths>:: 307 Commits modifying the given <paths> are selected. 308 309--simplify-by-decoration:: 310 Commits that are referred by some branch or tag are selected. 311 312Note that extra commits can be shown to give a meaningful history. 313 314The following options affect the way the simplification is performed: 315 316Default mode:: 317 Simplifies the history to the simplest history explaining the 318 final state of the tree. Simplest because it prunes some side 319 branches if the end result is the same (i.e. merging branches 320 with the same content) 321 322--full-history:: 323 Same as the default mode, but does not prune some history. 324 325--dense:: 326 Only the selected commits are shown, plus some to have a 327 meaningful history. 328 329--sparse:: 330 All commits in the simplified history are shown. 331 332--simplify-merges:: 333 Additional option to `--full-history` to remove some needless 334 merges from the resulting history, as there are no selected 335 commits contributing to this merge. 336 337--ancestry-path:: 338 When given a range of commits to display (e.g. 'commit1..commit2' 339 or 'commit2 {caret}commit1'), only display commits that exist 340 directly on the ancestry chain between the 'commit1' and 341 'commit2', i.e. commits that are both descendants of 'commit1', 342 and ancestors of 'commit2'. 343 344A more detailed explanation follows. 345 346Suppose you specified `foo` as the <paths>. We shall call commits 347that modify `foo` !TREESAME, and the rest TREESAME. (In a diff 348filtered for `foo`, they look different and equal, respectively.) 349 350In the following, we will always refer to the same example history to 351illustrate the differences between simplification settings. We assume 352that you are filtering for a file `foo` in this commit graph: 353----------------------------------------------------------------------- 354 .-A---M---N---O---P---Q 355 / / / / / / 356 I B C D E Y 357 \ / / / / / 358 `-------------' X 359----------------------------------------------------------------------- 360The horizontal line of history A---Q is taken to be the first parent of 361each merge. The commits are: 362 363* `I` is the initial commit, in which `foo` exists with contents 364 ``asdf'', and a file `quux` exists with contents ``quux''. Initial 365 commits are compared to an empty tree, so `I` is !TREESAME. 366 367* In `A`, `foo` contains just ``foo''. 368 369* `B` contains the same change as `A`. Its merge `M` is trivial and 370 hence TREESAME to all parents. 371 372* `C` does not change `foo`, but its merge `N` changes it to ``foobar'', 373 so it is not TREESAME to any parent. 374 375* `D` sets `foo` to ``baz''. Its merge `O` combines the strings from 376 `N` and `D` to ``foobarbaz''; i.e., it is not TREESAME to any parent. 377 378* `E` changes `quux` to ``xyzzy'', and its merge `P` combines the 379 strings to ``quux xyzzy''. `P` is TREESAME to `O`, but not to `E`. 380 381* `X` is an independent root commit that added a new file `side`, and `Y` 382 modified it. `Y` is TREESAME to `X`. Its merge `Q` added `side` to `P`, and 383 `Q` is TREESAME to `P`, but not to `Y`. 384 385`rev-list` walks backwards through history, including or excluding 386commits based on whether `--full-history` and/or parent rewriting 387(via `--parents` or `--children`) are used. The following settings 388are available. 389 390Default mode:: 391 Commits are included if they are not TREESAME to any parent 392 (though this can be changed, see `--sparse` below). If the 393 commit was a merge, and it was TREESAME to one parent, follow 394 only that parent. (Even if there are several TREESAME 395 parents, follow only one of them.) Otherwise, follow all 396 parents. 397+ 398This results in: 399+ 400----------------------------------------------------------------------- 401 .-A---N---O 402 / / / 403 I---------D 404----------------------------------------------------------------------- 405+ 406Note how the rule to only follow the TREESAME parent, if one is 407available, removed `B` from consideration entirely. `C` was 408considered via `N`, but is TREESAME. Root commits are compared to an 409empty tree, so `I` is !TREESAME. 410+ 411Parent/child relations are only visible with `--parents`, but that does 412not affect the commits selected in default mode, so we have shown the 413parent lines. 414 415--full-history without parent rewriting:: 416 This mode differs from the default in one point: always follow 417 all parents of a merge, even if it is TREESAME to one of them. 418 Even if more than one side of the merge has commits that are 419 included, this does not imply that the merge itself is! In 420 the example, we get 421+ 422----------------------------------------------------------------------- 423 I A B N D O P Q 424----------------------------------------------------------------------- 425+ 426`M` was excluded because it is TREESAME to both parents. `E`, 427`C` and `B` were all walked, but only `B` was !TREESAME, so the others 428do not appear. 429+ 430Note that without parent rewriting, it is not really possible to talk 431about the parent/child relationships between the commits, so we show 432them disconnected. 433 434--full-history with parent rewriting:: 435 Ordinary commits are only included if they are !TREESAME 436 (though this can be changed, see `--sparse` below). 437+ 438Merges are always included. However, their parent list is rewritten: 439Along each parent, prune away commits that are not included 440themselves. This results in 441+ 442----------------------------------------------------------------------- 443 .-A---M---N---O---P---Q 444 / / / / / 445 I B / D / 446 \ / / / / 447 `-------------' 448----------------------------------------------------------------------- 449+ 450Compare to `--full-history` without rewriting above. Note that `E` 451was pruned away because it is TREESAME, but the parent list of P was 452rewritten to contain `E`'s parent `I`. The same happened for `C` and 453`N`, and `X`, `Y` and `Q`. 454 455In addition to the above settings, you can change whether TREESAME 456affects inclusion: 457 458--dense:: 459 Commits that are walked are included if they are not TREESAME 460 to any parent. 461 462--sparse:: 463 All commits that are walked are included. 464+ 465Note that without `--full-history`, this still simplifies merges: if 466one of the parents is TREESAME, we follow only that one, so the other 467sides of the merge are never walked. 468 469--simplify-merges:: 470 First, build a history graph in the same way that 471 `--full-history` with parent rewriting does (see above). 472+ 473Then simplify each commit `C` to its replacement `C'` in the final 474history according to the following rules: 475+ 476-- 477* Set `C'` to `C`. 478+ 479* Replace each parent `P` of `C'` with its simplification `P'`. In 480 the process, drop parents that are ancestors of other parents or that are 481 root commits TREESAME to an empty tree, and remove duplicates, but take care 482 to never drop all parents that we are TREESAME to. 483+ 484* If after this parent rewriting, `C'` is a root or merge commit (has 485 zero or >1 parents), a boundary commit, or !TREESAME, it remains. 486 Otherwise, it is replaced with its only parent. 487-- 488+ 489The effect of this is best shown by way of comparing to 490`--full-history` with parent rewriting. The example turns into: 491+ 492----------------------------------------------------------------------- 493 .-A---M---N---O 494 / / / 495 I B D 496 \ / / 497 `---------' 498----------------------------------------------------------------------- 499+ 500Note the major differences in `N`, `P`, and `Q` over `--full-history`: 501+ 502-- 503* `N`'s parent list had `I` removed, because it is an ancestor of the 504 other parent `M`. Still, `N` remained because it is !TREESAME. 505+ 506* `P`'s parent list similarly had `I` removed. `P` was then 507 removed completely, because it had one parent and is TREESAME. 508+ 509* `Q`'s parent list had `Y` simplified to `X`. `X` was then removed, because it 510 was a TREESAME root. `Q` was then removed completely, because it had one 511 parent and is TREESAME. 512-- 513 514Finally, there is a fifth simplification mode available: 515 516--ancestry-path:: 517 Limit the displayed commits to those directly on the ancestry 518 chain between the ``from'' and ``to'' commits in the given commit 519 range. I.e. only display commits that are ancestor of the ``to'' 520 commit and descendants of the ``from'' commit. 521+ 522As an example use case, consider the following commit history: 523+ 524----------------------------------------------------------------------- 525 D---E-------F 526 / \ \ 527 B---C---G---H---I---J 528 / \ 529 A-------K---------------L--M 530----------------------------------------------------------------------- 531+ 532A regular 'D..M' computes the set of commits that are ancestors of `M`, 533but excludes the ones that are ancestors of `D`. This is useful to see 534what happened to the history leading to `M` since `D`, in the sense 535that ``what does `M` have that did not exist in `D`''. The result in this 536example would be all the commits, except `A` and `B` (and `D` itself, 537of course). 538+ 539When we want to find out what commits in `M` are contaminated with the 540bug introduced by `D` and need fixing, however, we might want to view 541only the subset of 'D..M' that are actually descendants of `D`, i.e. 542excluding `C` and `K`. This is exactly what the `--ancestry-path` 543option does. Applied to the 'D..M' range, it results in: 544+ 545----------------------------------------------------------------------- 546 E-------F 547 \ \ 548 G---H---I---J 549 \ 550 L--M 551----------------------------------------------------------------------- 552 553The `--simplify-by-decoration` option allows you to view only the 554big picture of the topology of the history, by omitting commits 555that are not referenced by tags. Commits are marked as !TREESAME 556(in other words, kept after history simplification rules described 557above) if (1) they are referenced by tags, or (2) they change the 558contents of the paths given on the command line. All other 559commits are marked as TREESAME (subject to be simplified away). 560 561ifdef::git-rev-list[] 562Bisection Helpers 563~~~~~~~~~~~~~~~~~ 564 565--bisect:: 566 Limit output to the one commit object which is roughly halfway between 567 included and excluded commits. Note that the bad bisection ref 568 `refs/bisect/bad` is added to the included commits (if it 569 exists) and the good bisection refs `refs/bisect/good-*` are 570 added to the excluded commits (if they exist). Thus, supposing there 571 are no refs in `refs/bisect/`, if 572+ 573----------------------------------------------------------------------- 574 $ git rev-list --bisect foo ^bar ^baz 575----------------------------------------------------------------------- 576+ 577outputs 'midpoint', the output of the two commands 578+ 579----------------------------------------------------------------------- 580 $ git rev-list foo ^midpoint 581 $ git rev-list midpoint ^bar ^baz 582----------------------------------------------------------------------- 583+ 584would be of roughly the same length. Finding the change which 585introduces a regression is thus reduced to a binary search: repeatedly 586generate and test new 'midpoint's until the commit chain is of length 587one. Cannot be combined with --first-parent. 588 589--bisect-vars:: 590 This calculates the same as `--bisect`, except that refs in 591 `refs/bisect/` are not used, and except that this outputs 592 text ready to be eval'ed by the shell. These lines will assign the 593 name of the midpoint revision to the variable `bisect_rev`, and the 594 expected number of commits to be tested after `bisect_rev` is tested 595 to `bisect_nr`, the expected number of commits to be tested if 596 `bisect_rev` turns out to be good to `bisect_good`, the expected 597 number of commits to be tested if `bisect_rev` turns out to be bad to 598 `bisect_bad`, and the number of commits we are bisecting right now to 599 `bisect_all`. 600 601--bisect-all:: 602 This outputs all the commit objects between the included and excluded 603 commits, ordered by their distance to the included and excluded 604 commits. Refs in `refs/bisect/` are not used. The farthest 605 from them is displayed first. (This is the only one displayed by 606 `--bisect`.) 607+ 608This is useful because it makes it easy to choose a good commit to 609test when you want to avoid to test some of them for some reason (they 610may not compile for example). 611+ 612This option can be used along with `--bisect-vars`, in this case, 613after all the sorted commit objects, there will be the same text as if 614`--bisect-vars` had been used alone. 615endif::git-rev-list[] 616 617 618Commit Ordering 619~~~~~~~~~~~~~~~ 620 621By default, the commits are shown in reverse chronological order. 622 623--date-order:: 624 Show no parents before all of its children are shown, but 625 otherwise show commits in the commit timestamp order. 626 627--author-date-order:: 628 Show no parents before all of its children are shown, but 629 otherwise show commits in the author timestamp order. 630 631--topo-order:: 632 Show no parents before all of its children are shown, and 633 avoid showing commits on multiple lines of history 634 intermixed. 635+ 636For example, in a commit history like this: 637+ 638---------------------------------------------------------------- 639 640 ---1----2----4----7 641 \ \ 642 3----5----6----8--- 643 644---------------------------------------------------------------- 645+ 646where the numbers denote the order of commit timestamps, `git 647rev-list` and friends with `--date-order` show the commits in the 648timestamp order: 8 7 6 5 4 3 2 1. 649+ 650With `--topo-order`, they would show 8 6 5 3 7 4 2 1 (or 8 7 4 2 6 5 6513 1); some older commits are shown before newer ones in order to 652avoid showing the commits from two parallel development track mixed 653together. 654 655--reverse:: 656 Output the commits in reverse order. 657 Cannot be combined with `--walk-reflogs`. 658 659Object Traversal 660~~~~~~~~~~~~~~~~ 661 662These options are mostly targeted for packing of Git repositories. 663 664ifdef::git-rev-list[] 665--objects:: 666 Print the object IDs of any object referenced by the listed 667 commits. `--objects foo ^bar` thus means ``send me 668 all object IDs which I need to download if I have the commit 669 object _bar_ but not _foo_''. 670 671--objects-edge:: 672 Similar to `--objects`, but also print the IDs of excluded 673 commits prefixed with a ``-'' character. This is used by 674 linkgit:git-pack-objects[1] to build a ``thin'' pack, which records 675 objects in deltified form based on objects contained in these 676 excluded commits to reduce network traffic. 677 678--objects-edge-aggressive:: 679 Similar to `--objects-edge`, but it tries harder to find excluded 680 commits at the cost of increased time. This is used instead of 681 `--objects-edge` to build ``thin'' packs for shallow repositories. 682 683--indexed-objects:: 684 Pretend as if all trees and blobs used by the index are listed 685 on the command line. Note that you probably want to use 686 `--objects`, too. 687 688--unpacked:: 689 Only useful with `--objects`; print the object IDs that are not 690 in packs. 691endif::git-rev-list[] 692 693--no-walk[=(sorted|unsorted)]:: 694 Only show the given commits, but do not traverse their ancestors. 695 This has no effect if a range is specified. If the argument 696 `unsorted` is given, the commits are shown in the order they were 697 given on the command line. Otherwise (if `sorted` or no argument 698 was given), the commits are shown in reverse chronological order 699 by commit time. 700 Cannot be combined with `--graph`. 701 702--do-walk:: 703 Overrides a previous `--no-walk`. 704 705Commit Formatting 706~~~~~~~~~~~~~~~~~ 707 708ifdef::git-rev-list[] 709Using these options, linkgit:git-rev-list[1] will act similar to the 710more specialized family of commit log tools: linkgit:git-log[1], 711linkgit:git-show[1], and linkgit:git-whatchanged[1] 712endif::git-rev-list[] 713 714include::pretty-options.txt[] 715 716--relative-date:: 717 Synonym for `--date=relative`. 718 719--date=<format>:: 720 Only takes effect for dates shown in human-readable format, such 721 as when using `--pretty`. `log.date` config variable sets a default 722 value for the log command's `--date` option. By default, dates 723 are shown in the original time zone (either committer's or 724 author's). If `-local` is appended to the format (e.g., 725 `iso-local`), the user's local time zone is used instead. 726+ 727`--date=relative` shows dates relative to the current time, 728e.g. ``2 hours ago''. The `-local` option cannot be used with 729`--raw` or `--relative`. 730+ 731`--date=local` is an alias for `--date=default-local`. 732+ 733`--date=iso` (or `--date=iso8601`) shows timestamps in a ISO 8601-like format. 734The differences to the strict ISO 8601 format are: 735 736 - a space instead of the `T` date/time delimiter 737 - a space between time and time zone 738 - no colon between hours and minutes of the time zone 739 740+ 741`--date=iso-strict` (or `--date=iso8601-strict`) shows timestamps in strict 742ISO 8601 format. 743+ 744`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 745format, often found in email messages. 746+ 747`--date=short` shows only the date, but not the time, in `YYYY-MM-DD` format. 748+ 749`--date=raw` shows the date in the internal raw Git format `%s %z` format. 750+ 751`--date=format:...` feeds the format `...` to your system `strftime`. 752Use `--date=format:%c` to show the date in your system locale's 753preferred format. See the `strftime` manual for a complete list of 754format placeholders. When using `-local`, the correct syntax is 755`--date=format-local:...`. 756+ 757`--date=default` is the default format, and is similar to 758`--date=rfc2822`, with a few exceptions: 759 760 - there is no comma after the day-of-week 761 762 - the time zone is omitted when the local time zone is used 763 764ifdef::git-rev-list[] 765--header:: 766 Print the contents of the commit in raw-format; each record is 767 separated with a NUL character. 768endif::git-rev-list[] 769 770--parents:: 771 Print also the parents of the commit (in the form "commit parent..."). 772 Also enables parent rewriting, see 'History Simplification' below. 773 774--children:: 775 Print also the children of the commit (in the form "commit child..."). 776 Also enables parent rewriting, see 'History Simplification' below. 777 778ifdef::git-rev-list[] 779--timestamp:: 780 Print the raw commit timestamp. 781endif::git-rev-list[] 782 783--left-right:: 784 Mark which side of a symmetric diff a commit is reachable from. 785 Commits from the left side are prefixed with `<` and those from 786 the right with `>`. If combined with `--boundary`, those 787 commits are prefixed with `-`. 788+ 789For example, if you have this topology: 790+ 791----------------------------------------------------------------------- 792 y---b---b branch B 793 / \ / 794 / . 795 / / \ 796 o---x---a---a branch A 797----------------------------------------------------------------------- 798+ 799you would get an output like this: 800+ 801----------------------------------------------------------------------- 802 $ git rev-list --left-right --boundary --pretty=oneline A...B 803 804 >bbbbbbb... 3rd on b 805 >bbbbbbb... 2nd on b 806 <aaaaaaa... 3rd on a 807 <aaaaaaa... 2nd on a 808 -yyyyyyy... 1st on b 809 -xxxxxxx... 1st on a 810----------------------------------------------------------------------- 811 812--graph:: 813 Draw a text-based graphical representation of the commit history 814 on the left hand side of the output. This may cause extra lines 815 to be printed in between commits, in order for the graph history 816 to be drawn properly. 817 Cannot be combined with `--no-walk`. 818+ 819This enables parent rewriting, see 'History Simplification' below. 820+ 821This implies the `--topo-order` option by default, but the 822`--date-order` option may also be specified. 823 824--show-linear-break[=<barrier>]:: 825 When --graph is not used, all history branches are flattened 826 which can make it hard to see that the two consecutive commits 827 do not belong to a linear branch. This option puts a barrier 828 in between them in that case. If `<barrier>` is specified, it 829 is the string that will be shown instead of the default one. 830 831ifdef::git-rev-list[] 832--count:: 833 Print a number stating how many commits would have been 834 listed, and suppress all other output. When used together 835 with `--left-right`, instead print the counts for left and 836 right commits, separated by a tab. When used together with 837 `--cherry-mark`, omit patch equivalent commits from these 838 counts and print the count for equivalent commits separated 839 by a tab. 840endif::git-rev-list[] 841 842ifndef::git-rev-list[] 843Diff Formatting 844~~~~~~~~~~~~~~~ 845 846Listed below are options that control the formatting of diff output. 847Some of them are specific to linkgit:git-rev-list[1], however other diff 848options may be given. See linkgit:git-diff-files[1] for more options. 849 850-c:: 851 With this option, diff output for a merge commit 852 shows the differences from each of the parents to the merge result 853 simultaneously instead of showing pairwise diff between a parent 854 and the result one at a time. Furthermore, it lists only files 855 which were modified from all parents. 856 857--cc:: 858 This flag implies the `-c` option and further compresses the 859 patch output by omitting uninteresting hunks whose contents in 860 the parents have only two variants and the merge result picks 861 one of them without modification. 862 863-m:: 864 This flag makes the merge commits show the full diff like 865 regular commits; for each merge parent, a separate log entry 866 and diff is generated. An exception is that only diff against 867 the first parent is shown when `--first-parent` option is given; 868 in that case, the output represents the changes the merge 869 brought _into_ the then-current branch. 870 871-r:: 872 Show recursive diffs. 873 874-t:: 875 Show the tree objects in the diff output. This implies `-r`. 876endif::git-rev-list[]