1CONFIGURATION FILE 2------------------ 3 4The Git configuration file contains a number of variables that affect 5the Git commands' behavior. The `.git/config` file in each repository 6is used to store the configuration for that repository, and 7`$HOME/.gitconfig` is used to store a per-user configuration as 8fallback values for the `.git/config` file. The file `/etc/gitconfig` 9can be used to store a system-wide default configuration. 10 11The configuration variables are used by both the Git plumbing 12and the porcelains. The variables are divided into sections, wherein 13the fully qualified variable name of the variable itself is the last 14dot-separated segment and the section name is everything before the last 15dot. The variable names are case-insensitive, allow only alphanumeric 16characters and `-`, and must start with an alphabetic character. Some 17variables may appear multiple times. 18 19Syntax 20~~~~~~ 21 22The syntax is fairly flexible and permissive; whitespaces are mostly 23ignored. The '#' and ';' characters begin comments to the end of line, 24blank lines are ignored. 25 26The file consists of sections and variables. A section begins with 27the name of the section in square brackets and continues until the next 28section begins. Section names are not case sensitive. Only alphanumeric 29characters, `-` and `.` are allowed in section names. Each variable 30must belong to some section, which means that there must be a section 31header before the first setting of a variable. 32 33Sections can be further divided into subsections. To begin a subsection 34put its name in double quotes, separated by space from the section name, 35in the section header, like in the example below: 36 37-------- 38 [section "subsection"] 39 40-------- 41 42Subsection names are case sensitive and can contain any characters except 43newline (doublequote `"` and backslash have to be escaped as `\"` and `\\`, 44respectively). Section headers cannot span multiple 45lines. Variables may belong directly to a section or to a given subsection. 46You can have `[section]` if you have `[section "subsection"]`, but you 47don't need to. 48 49There is also a deprecated `[section.subsection]` syntax. With this 50syntax, the subsection name is converted to lower-case and is also 51compared case sensitively. These subsection names follow the same 52restrictions as section names. 53 54All the other lines (and the remainder of the line after the section 55header) are recognized as setting variables, in the form 56'name = value'. If there is no equal sign on the line, the entire line 57is taken as 'name' and the variable is recognized as boolean "true". 58The variable names are case-insensitive, allow only alphanumeric characters 59and `-`, and must start with an alphabetic character. There can be more 60than one value for a given variable; we say then that the variable is 61multivalued. 62 63Leading and trailing whitespace in a variable value is discarded. 64Internal whitespace within a variable value is retained verbatim. 65 66The values following the equals sign in variable assign are all either 67a string, an integer, or a boolean. Boolean values may be given as yes/no, 681/0, true/false or on/off. Case is not significant in boolean values, when 69converting value to the canonical form using '--bool' type specifier; 70'git config' will ensure that the output is "true" or "false". 71 72String values may be entirely or partially enclosed in double quotes. 73You need to enclose variable values in double quotes if you want to 74preserve leading or trailing whitespace, or if the variable value contains 75comment characters (i.e. it contains '#' or ';'). 76Double quote `"` and backslash `\` characters in variable values must 77be escaped: use `\"` for `"` and `\\` for `\`. 78 79The following escape sequences (beside `\"` and `\\`) are recognized: 80`\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB) 81and `\b` for backspace (BS). Other char escape sequences (including octal 82escape sequences) are invalid. 83 84Variable values ending in a `\` are continued on the next line in the 85customary UNIX fashion. 86 87Some variables may require a special value format. 88 89Includes 90~~~~~~~~ 91 92You can include one config file from another by setting the special 93`include.path` variable to the name of the file to be included. The 94included file is expanded immediately, as if its contents had been 95found at the location of the include directive. If the value of the 96`include.path` variable is a relative path, the path is considered to be 97relative to the configuration file in which the include directive was 98found. The value of `include.path` is subject to tilde expansion: `~/` 99is expanded to the value of `$HOME`, and `~user/` to the specified 100user's home directory. See below for examples. 101 102Example 103~~~~~~~ 104 105 # Core variables 106 [core] 107 ; Don't trust file modes 108 filemode = false 109 110 # Our diff algorithm 111 [diff] 112 external = /usr/local/bin/diff-wrapper 113 renames = true 114 115 [branch "devel"] 116 remote = origin 117 merge = refs/heads/devel 118 119 # Proxy settings 120 [core] 121 gitProxy="ssh" for "kernel.org" 122 gitProxy=default-proxy ; for the rest 123 124 [include] 125 path = /path/to/foo.inc ; include by absolute path 126 path = foo ; expand "foo" relative to the current file 127 path = ~/foo ; expand "foo" in your $HOME directory 128 129Variables 130~~~~~~~~~ 131 132Note that this list is non-comprehensive and not necessarily complete. 133For command-specific variables, you will find a more detailed description 134in the appropriate manual page. 135 136Other git-related tools may and do use their own variables. When 137inventing new variables for use in your own tool, make sure their 138names do not conflict with those that are used by Git itself and 139other popular tools, and describe them in your documentation. 140 141 142advice.*:: 143 These variables control various optional help messages designed to 144 aid new users. All 'advice.*' variables default to 'true', and you 145 can tell Git that you do not need help by setting these to 'false': 146+ 147-- 148 pushUpdateRejected:: 149 Set this variable to 'false' if you want to disable 150 'pushNonFFCurrent', 151 'pushNonFFMatching', 'pushAlreadyExists', 152 'pushFetchFirst', and 'pushNeedsForce' 153 simultaneously. 154 pushNonFFCurrent:: 155 Advice shown when linkgit:git-push[1] fails due to a 156 non-fast-forward update to the current branch. 157 pushNonFFMatching:: 158 Advice shown when you ran linkgit:git-push[1] and pushed 159 'matching refs' explicitly (i.e. you used ':', or 160 specified a refspec that isn't your current branch) and 161 it resulted in a non-fast-forward error. 162 pushAlreadyExists:: 163 Shown when linkgit:git-push[1] rejects an update that 164 does not qualify for fast-forwarding (e.g., a tag.) 165 pushFetchFirst:: 166 Shown when linkgit:git-push[1] rejects an update that 167 tries to overwrite a remote ref that points at an 168 object we do not have. 169 pushNeedsForce:: 170 Shown when linkgit:git-push[1] rejects an update that 171 tries to overwrite a remote ref that points at an 172 object that is not a commit-ish, or make the remote 173 ref point at an object that is not a commit-ish. 174 statusHints:: 175 Show directions on how to proceed from the current 176 state in the output of linkgit:git-status[1], in 177 the template shown when writing commit messages in 178 linkgit:git-commit[1], and in the help message shown 179 by linkgit:git-checkout[1] when switching branch. 180 statusUoption:: 181 Advise to consider using the `-u` option to linkgit:git-status[1] 182 when the command takes more than 2 seconds to enumerate untracked 183 files. 184 commitBeforeMerge:: 185 Advice shown when linkgit:git-merge[1] refuses to 186 merge to avoid overwriting local changes. 187 resolveConflict:: 188 Advice shown by various commands when conflicts 189 prevent the operation from being performed. 190 implicitIdentity:: 191 Advice on how to set your identity configuration when 192 your information is guessed from the system username and 193 domain name. 194 detachedHead:: 195 Advice shown when you used linkgit:git-checkout[1] to 196 move to the detach HEAD state, to instruct how to create 197 a local branch after the fact. 198 amWorkDir:: 199 Advice that shows the location of the patch file when 200 linkgit:git-am[1] fails to apply it. 201 rmHints:: 202 In case of failure in the output of linkgit:git-rm[1], 203 show directions on how to proceed from the current state. 204-- 205 206core.fileMode:: 207 If false, the executable bit differences between the index and 208 the working tree are ignored; useful on broken filesystems like FAT. 209 See linkgit:git-update-index[1]. 210+ 211The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] 212will probe and set core.fileMode false if appropriate when the 213repository is created. 214 215core.ignorecase:: 216 If true, this option enables various workarounds to enable 217 Git to work better on filesystems that are not case sensitive, 218 like FAT. For example, if a directory listing finds 219 "makefile" when Git expects "Makefile", Git will assume 220 it is really the same file, and continue to remember it as 221 "Makefile". 222+ 223The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] 224will probe and set core.ignorecase true if appropriate when the repository 225is created. 226 227core.precomposeunicode:: 228 This option is only used by Mac OS implementation of Git. 229 When core.precomposeunicode=true, Git reverts the unicode decomposition 230 of filenames done by Mac OS. This is useful when sharing a repository 231 between Mac OS and Linux or Windows. 232 (Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7). 233 When false, file names are handled fully transparent by Git, 234 which is backward compatible with older versions of Git. 235 236core.protectHFS:: 237 If set to true, do not allow checkout of paths that would 238 be considered equivalent to `.git` on an HFS+ filesystem. 239 Defaults to `true` on Mac OS, and `false` elsewhere. 240 241core.protectNTFS:: 242 If set to true, do not allow checkout of paths that would 243 cause problems with the NTFS filesystem, e.g. conflict with 244 8.3 "short" names. 245 Defaults to `true` on Windows, and `false` elsewhere. 246 247core.trustctime:: 248 If false, the ctime differences between the index and the 249 working tree are ignored; useful when the inode change time 250 is regularly modified by something outside Git (file system 251 crawlers and some backup systems). 252 See linkgit:git-update-index[1]. True by default. 253 254core.checkstat:: 255 Determines which stat fields to match between the index 256 and work tree. The user can set this to 'default' or 257 'minimal'. Default (or explicitly 'default'), is to check 258 all fields, including the sub-second part of mtime and ctime. 259 260core.quotepath:: 261 The commands that output paths (e.g. 'ls-files', 262 'diff'), when not given the `-z` option, will quote 263 "unusual" characters in the pathname by enclosing the 264 pathname in a double-quote pair and with backslashes the 265 same way strings in C source code are quoted. If this 266 variable is set to false, the bytes higher than 0x80 are 267 not quoted but output as verbatim. Note that double 268 quote, backslash and control characters are always 269 quoted without `-z` regardless of the setting of this 270 variable. 271 272core.eol:: 273 Sets the line ending type to use in the working directory for 274 files that have the `text` property set. Alternatives are 275 'lf', 'crlf' and 'native', which uses the platform's native 276 line ending. The default value is `native`. See 277 linkgit:gitattributes[5] for more information on end-of-line 278 conversion. 279 280core.safecrlf:: 281 If true, makes Git check if converting `CRLF` is reversible when 282 end-of-line conversion is active. Git will verify if a command 283 modifies a file in the work tree either directly or indirectly. 284 For example, committing a file followed by checking out the 285 same file should yield the original file in the work tree. If 286 this is not the case for the current setting of 287 `core.autocrlf`, Git will reject the file. The variable can 288 be set to "warn", in which case Git will only warn about an 289 irreversible conversion but continue the operation. 290+ 291CRLF conversion bears a slight chance of corrupting data. 292When it is enabled, Git will convert CRLF to LF during commit and LF to 293CRLF during checkout. A file that contains a mixture of LF and 294CRLF before the commit cannot be recreated by Git. For text 295files this is the right thing to do: it corrects line endings 296such that we have only LF line endings in the repository. 297But for binary files that are accidentally classified as text the 298conversion can corrupt data. 299+ 300If you recognize such corruption early you can easily fix it by 301setting the conversion type explicitly in .gitattributes. Right 302after committing you still have the original file in your work 303tree and this file is not yet corrupted. You can explicitly tell 304Git that this file is binary and Git will handle the file 305appropriately. 306+ 307Unfortunately, the desired effect of cleaning up text files with 308mixed line endings and the undesired effect of corrupting binary 309files cannot be distinguished. In both cases CRLFs are removed 310in an irreversible way. For text files this is the right thing 311to do because CRLFs are line endings, while for binary files 312converting CRLFs corrupts data. 313+ 314Note, this safety check does not mean that a checkout will generate a 315file identical to the original file for a different setting of 316`core.eol` and `core.autocrlf`, but only for the current one. For 317example, a text file with `LF` would be accepted with `core.eol=lf` 318and could later be checked out with `core.eol=crlf`, in which case the 319resulting file would contain `CRLF`, although the original file 320contained `LF`. However, in both work trees the line endings would be 321consistent, that is either all `LF` or all `CRLF`, but never mixed. A 322file with mixed line endings would be reported by the `core.safecrlf` 323mechanism. 324 325core.autocrlf:: 326 Setting this variable to "true" is almost the same as setting 327 the `text` attribute to "auto" on all files except that text 328 files are not guaranteed to be normalized: files that contain 329 `CRLF` in the repository will not be touched. Use this 330 setting if you want to have `CRLF` line endings in your 331 working directory even though the repository does not have 332 normalized line endings. This variable can be set to 'input', 333 in which case no output conversion is performed. 334 335core.symlinks:: 336 If false, symbolic links are checked out as small plain files that 337 contain the link text. linkgit:git-update-index[1] and 338 linkgit:git-add[1] will not change the recorded type to regular 339 file. Useful on filesystems like FAT that do not support 340 symbolic links. 341+ 342The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] 343will probe and set core.symlinks false if appropriate when the repository 344is created. 345 346core.gitProxy:: 347 A "proxy command" to execute (as 'command host port') instead 348 of establishing direct connection to the remote server when 349 using the Git protocol for fetching. If the variable value is 350 in the "COMMAND for DOMAIN" format, the command is applied only 351 on hostnames ending with the specified domain string. This variable 352 may be set multiple times and is matched in the given order; 353 the first match wins. 354+ 355Can be overridden by the 'GIT_PROXY_COMMAND' environment variable 356(which always applies universally, without the special "for" 357handling). 358+ 359The special string `none` can be used as the proxy command to 360specify that no proxy be used for a given domain pattern. 361This is useful for excluding servers inside a firewall from 362proxy use, while defaulting to a common proxy for external domains. 363 364core.ignoreStat:: 365 If true, commands which modify both the working tree and the index 366 will mark the updated paths with the "assume unchanged" bit in the 367 index. These marked files are then assumed to stay unchanged in the 368 working tree, until you mark them otherwise manually - Git will not 369 detect the file changes by lstat() calls. This is useful on systems 370 where those are very slow, such as Microsoft Windows. 371 See linkgit:git-update-index[1]. 372 False by default. 373 374core.preferSymlinkRefs:: 375 Instead of the default "symref" format for HEAD 376 and other symbolic reference files, use symbolic links. 377 This is sometimes needed to work with old scripts that 378 expect HEAD to be a symbolic link. 379 380core.bare:: 381 If true this repository is assumed to be 'bare' and has no 382 working directory associated with it. If this is the case a 383 number of commands that require a working directory will be 384 disabled, such as linkgit:git-add[1] or linkgit:git-merge[1]. 385+ 386This setting is automatically guessed by linkgit:git-clone[1] or 387linkgit:git-init[1] when the repository was created. By default a 388repository that ends in "/.git" is assumed to be not bare (bare = 389false), while all other repositories are assumed to be bare (bare 390= true). 391 392core.worktree:: 393 Set the path to the root of the working tree. 394 This can be overridden by the GIT_WORK_TREE environment 395 variable and the '--work-tree' command-line option. 396 The value can be an absolute path or relative to the path to 397 the .git directory, which is either specified by --git-dir 398 or GIT_DIR, or automatically discovered. 399 If --git-dir or GIT_DIR is specified but none of 400 --work-tree, GIT_WORK_TREE and core.worktree is specified, 401 the current working directory is regarded as the top level 402 of your working tree. 403+ 404Note that this variable is honored even when set in a configuration 405file in a ".git" subdirectory of a directory and its value differs 406from the latter directory (e.g. "/path/to/.git/config" has 407core.worktree set to "/different/path"), which is most likely a 408misconfiguration. Running Git commands in the "/path/to" directory will 409still use "/different/path" as the root of the work tree and can cause 410confusion unless you know what you are doing (e.g. you are creating a 411read-only snapshot of the same index to a location different from the 412repository's usual working tree). 413 414core.logAllRefUpdates:: 415 Enable the reflog. Updates to a ref <ref> is logged to the file 416 "$GIT_DIR/logs/<ref>", by appending the new and old 417 SHA-1, the date/time and the reason of the update, but 418 only when the file exists. If this configuration 419 variable is set to true, missing "$GIT_DIR/logs/<ref>" 420 file is automatically created for branch heads (i.e. under 421 refs/heads/), remote refs (i.e. under refs/remotes/), 422 note refs (i.e. under refs/notes/), and the symbolic ref HEAD. 423+ 424This information can be used to determine what commit 425was the tip of a branch "2 days ago". 426+ 427This value is true by default in a repository that has 428a working directory associated with it, and false by 429default in a bare repository. 430 431core.repositoryFormatVersion:: 432 Internal variable identifying the repository format and layout 433 version. 434 435core.sharedRepository:: 436 When 'group' (or 'true'), the repository is made shareable between 437 several users in a group (making sure all the files and objects are 438 group-writable). When 'all' (or 'world' or 'everybody'), the 439 repository will be readable by all users, additionally to being 440 group-shareable. When 'umask' (or 'false'), Git will use permissions 441 reported by umask(2). When '0xxx', where '0xxx' is an octal number, 442 files in the repository will have this mode value. '0xxx' will override 443 user's umask value (whereas the other options will only override 444 requested parts of the user's umask value). Examples: '0660' will make 445 the repo read/write-able for the owner and group, but inaccessible to 446 others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a 447 repository that is group-readable but not group-writable. 448 See linkgit:git-init[1]. False by default. 449 450core.warnAmbiguousRefs:: 451 If true, Git will warn you if the ref name you passed it is ambiguous 452 and might match multiple refs in the repository. True by default. 453 454core.compression:: 455 An integer -1..9, indicating a default compression level. 456 -1 is the zlib default. 0 means no compression, 457 and 1..9 are various speed/size tradeoffs, 9 being slowest. 458 If set, this provides a default to other compression variables, 459 such as 'core.loosecompression' and 'pack.compression'. 460 461core.loosecompression:: 462 An integer -1..9, indicating the compression level for objects that 463 are not in a pack file. -1 is the zlib default. 0 means no 464 compression, and 1..9 are various speed/size tradeoffs, 9 being 465 slowest. If not set, defaults to core.compression. If that is 466 not set, defaults to 1 (best speed). 467 468core.packedGitWindowSize:: 469 Number of bytes of a pack file to map into memory in a 470 single mapping operation. Larger window sizes may allow 471 your system to process a smaller number of large pack files 472 more quickly. Smaller window sizes will negatively affect 473 performance due to increased calls to the operating system's 474 memory manager, but may improve performance when accessing 475 a large number of large pack files. 476+ 477Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32 478MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should 479be reasonable for all users/operating systems. You probably do 480not need to adjust this value. 481+ 482Common unit suffixes of 'k', 'm', or 'g' are supported. 483 484core.packedGitLimit:: 485 Maximum number of bytes to map simultaneously into memory 486 from pack files. If Git needs to access more than this many 487 bytes at once to complete an operation it will unmap existing 488 regions to reclaim virtual address space within the process. 489+ 490Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms. 491This should be reasonable for all users/operating systems, except on 492the largest projects. You probably do not need to adjust this value. 493+ 494Common unit suffixes of 'k', 'm', or 'g' are supported. 495 496core.deltaBaseCacheLimit:: 497 Maximum number of bytes to reserve for caching base objects 498 that may be referenced by multiple deltified objects. By storing the 499 entire decompressed base objects in a cache Git is able 500 to avoid unpacking and decompressing frequently used base 501 objects multiple times. 502+ 503Default is 96 MiB on all platforms. This should be reasonable 504for all users/operating systems, except on the largest projects. 505You probably do not need to adjust this value. 506+ 507Common unit suffixes of 'k', 'm', or 'g' are supported. 508 509core.bigFileThreshold:: 510 Files larger than this size are stored deflated, without 511 attempting delta compression. Storing large files without 512 delta compression avoids excessive memory usage, at the 513 slight expense of increased disk usage. 514+ 515Default is 512 MiB on all platforms. This should be reasonable 516for most projects as source code and other text files can still 517be delta compressed, but larger binary media files won't be. 518+ 519Common unit suffixes of 'k', 'm', or 'g' are supported. 520 521core.excludesfile:: 522 In addition to '.gitignore' (per-directory) and 523 '.git/info/exclude', Git looks into this file for patterns 524 of files which are not meant to be tracked. "`~/`" is expanded 525 to the value of `$HOME` and "`~user/`" to the specified user's 526 home directory. Its default value is $XDG_CONFIG_HOME/git/ignore. 527 If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore 528 is used instead. See linkgit:gitignore[5]. 529 530core.askpass:: 531 Some commands (e.g. svn and http interfaces) that interactively 532 ask for a password can be told to use an external program given 533 via the value of this variable. Can be overridden by the 'GIT_ASKPASS' 534 environment variable. If not set, fall back to the value of the 535 'SSH_ASKPASS' environment variable or, failing that, a simple password 536 prompt. The external program shall be given a suitable prompt as 537 command-line argument and write the password on its STDOUT. 538 539core.attributesfile:: 540 In addition to '.gitattributes' (per-directory) and 541 '.git/info/attributes', Git looks into this file for attributes 542 (see linkgit:gitattributes[5]). Path expansions are made the same 543 way as for `core.excludesfile`. Its default value is 544 $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not 545 set or empty, $HOME/.config/git/attributes is used instead. 546 547core.editor:: 548 Commands such as `commit` and `tag` that lets you edit 549 messages by launching an editor uses the value of this 550 variable when it is set, and the environment variable 551 `GIT_EDITOR` is not set. See linkgit:git-var[1]. 552 553core.commentchar:: 554 Commands such as `commit` and `tag` that lets you edit 555 messages consider a line that begins with this character 556 commented, and removes them after the editor returns 557 (default '#'). 558+ 559If set to "auto", `git-commit` would select a character that is not 560the beginning character of any line in existing commit messages. 561 562sequence.editor:: 563 Text editor used by `git rebase -i` for editing the rebase instruction file. 564 The value is meant to be interpreted by the shell when it is used. 565 It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable. 566 When not configured the default commit message editor is used instead. 567 568core.pager:: 569 Text viewer for use by Git commands (e.g., 'less'). The value 570 is meant to be interpreted by the shell. The order of preference 571 is the `$GIT_PAGER` environment variable, then `core.pager` 572 configuration, then `$PAGER`, and then the default chosen at 573 compile time (usually 'less'). 574+ 575When the `LESS` environment variable is unset, Git sets it to `FRX` 576(if `LESS` environment variable is set, Git does not change it at 577all). If you want to selectively override Git's default setting 578for `LESS`, you can set `core.pager` to e.g. `less -S`. This will 579be passed to the shell by Git, which will translate the final 580command to `LESS=FRX less -S`. The environment does not set the 581`S` option but the command line does, instructing less to truncate 582long lines. Similarly, setting `core.pager` to `less -+F` will 583deactivate the `F` option specified by the environment from the 584command-line, deactivating the "quit if one screen" behavior of 585`less`. One can specifically activate some flags for particular 586commands: for example, setting `pager.blame` to `less -S` enables 587line truncation only for `git blame`. 588+ 589Likewise, when the `LV` environment variable is unset, Git sets it 590to `-c`. You can override this setting by exporting `LV` with 591another value or setting `core.pager` to `lv +c`. 592 593core.whitespace:: 594 A comma separated list of common whitespace problems to 595 notice. 'git diff' will use `color.diff.whitespace` to 596 highlight them, and 'git apply --whitespace=error' will 597 consider them as errors. You can prefix `-` to disable 598 any of them (e.g. `-trailing-space`): 599+ 600* `blank-at-eol` treats trailing whitespaces at the end of the line 601 as an error (enabled by default). 602* `space-before-tab` treats a space character that appears immediately 603 before a tab character in the initial indent part of the line as an 604 error (enabled by default). 605* `indent-with-non-tab` treats a line that is indented with space 606 characters instead of the equivalent tabs as an error (not enabled by 607 default). 608* `tab-in-indent` treats a tab character in the initial indent part of 609 the line as an error (not enabled by default). 610* `blank-at-eof` treats blank lines added at the end of file as an error 611 (enabled by default). 612* `trailing-space` is a short-hand to cover both `blank-at-eol` and 613 `blank-at-eof`. 614* `cr-at-eol` treats a carriage-return at the end of line as 615 part of the line terminator, i.e. with it, `trailing-space` 616 does not trigger if the character before such a carriage-return 617 is not a whitespace (not enabled by default). 618* `tabwidth=<n>` tells how many character positions a tab occupies; this 619 is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent` 620 errors. The default tab width is 8. Allowed values are 1 to 63. 621 622core.fsyncobjectfiles:: 623 This boolean will enable 'fsync()' when writing object files. 624+ 625This is a total waste of time and effort on a filesystem that orders 626data writes properly, but can be useful for filesystems that do not use 627journalling (traditional UNIX filesystems) or that only journal metadata 628and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback"). 629 630core.preloadindex:: 631 Enable parallel index preload for operations like 'git diff' 632+ 633This can speed up operations like 'git diff' and 'git status' especially 634on filesystems like NFS that have weak caching semantics and thus 635relatively high IO latencies. When enabled, Git will do the 636index comparison to the filesystem data in parallel, allowing 637overlapping IO's. Defaults to true. 638 639core.createObject:: 640 You can set this to 'link', in which case a hardlink followed by 641 a delete of the source are used to make sure that object creation 642 will not overwrite existing objects. 643+ 644On some file system/operating system combinations, this is unreliable. 645Set this config setting to 'rename' there; However, This will remove the 646check that makes sure that existing object files will not get overwritten. 647 648core.notesRef:: 649 When showing commit messages, also show notes which are stored in 650 the given ref. The ref must be fully qualified. If the given 651 ref does not exist, it is not an error but means that no 652 notes should be printed. 653+ 654This setting defaults to "refs/notes/commits", and it can be overridden by 655the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1]. 656 657core.sparseCheckout:: 658 Enable "sparse checkout" feature. See section "Sparse checkout" in 659 linkgit:git-read-tree[1] for more information. 660 661core.abbrev:: 662 Set the length object names are abbreviated to. If unspecified, 663 many commands abbreviate to 7 hexdigits, which may not be enough 664 for abbreviated object names to stay unique for sufficiently long 665 time. 666 667add.ignore-errors:: 668add.ignoreErrors:: 669 Tells 'git add' to continue adding files when some files cannot be 670 added due to indexing errors. Equivalent to the '--ignore-errors' 671 option of linkgit:git-add[1]. Older versions of Git accept only 672 `add.ignore-errors`, which does not follow the usual naming 673 convention for configuration variables. Newer versions of Git 674 honor `add.ignoreErrors` as well. 675 676alias.*:: 677 Command aliases for the linkgit:git[1] command wrapper - e.g. 678 after defining "alias.last = cat-file commit HEAD", the invocation 679 "git last" is equivalent to "git cat-file commit HEAD". To avoid 680 confusion and troubles with script usage, aliases that 681 hide existing Git commands are ignored. Arguments are split by 682 spaces, the usual shell quoting and escaping is supported. 683 A quote pair or a backslash can be used to quote them. 684+ 685If the alias expansion is prefixed with an exclamation point, 686it will be treated as a shell command. For example, defining 687"alias.new = !gitk --all --not ORIG_HEAD", the invocation 688"git new" is equivalent to running the shell command 689"gitk --all --not ORIG_HEAD". Note that shell commands will be 690executed from the top-level directory of a repository, which may 691not necessarily be the current directory. 692'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix' 693from the original current directory. See linkgit:git-rev-parse[1]. 694 695am.keepcr:: 696 If true, git-am will call git-mailsplit for patches in mbox format 697 with parameter '--keep-cr'. In this case git-mailsplit will 698 not remove `\r` from lines ending with `\r\n`. Can be overridden 699 by giving '--no-keep-cr' from the command line. 700 See linkgit:git-am[1], linkgit:git-mailsplit[1]. 701 702apply.ignorewhitespace:: 703 When set to 'change', tells 'git apply' to ignore changes in 704 whitespace, in the same way as the '--ignore-space-change' 705 option. 706 When set to one of: no, none, never, false tells 'git apply' to 707 respect all whitespace differences. 708 See linkgit:git-apply[1]. 709 710apply.whitespace:: 711 Tells 'git apply' how to handle whitespaces, in the same way 712 as the '--whitespace' option. See linkgit:git-apply[1]. 713 714branch.autosetupmerge:: 715 Tells 'git branch' and 'git checkout' to set up new branches 716 so that linkgit:git-pull[1] will appropriately merge from the 717 starting point branch. Note that even if this option is not set, 718 this behavior can be chosen per-branch using the `--track` 719 and `--no-track` options. The valid settings are: `false` -- no 720 automatic setup is done; `true` -- automatic setup is done when the 721 starting point is a remote-tracking branch; `always` -- 722 automatic setup is done when the starting point is either a 723 local branch or remote-tracking 724 branch. This option defaults to true. 725 726branch.autosetuprebase:: 727 When a new branch is created with 'git branch' or 'git checkout' 728 that tracks another branch, this variable tells Git to set 729 up pull to rebase instead of merge (see "branch.<name>.rebase"). 730 When `never`, rebase is never automatically set to true. 731 When `local`, rebase is set to true for tracked branches of 732 other local branches. 733 When `remote`, rebase is set to true for tracked branches of 734 remote-tracking branches. 735 When `always`, rebase will be set to true for all tracking 736 branches. 737 See "branch.autosetupmerge" for details on how to set up a 738 branch to track another branch. 739 This option defaults to never. 740 741branch.<name>.remote:: 742 When on branch <name>, it tells 'git fetch' and 'git push' 743 which remote to fetch from/push to. The remote to push to 744 may be overridden with `remote.pushdefault` (for all branches). 745 The remote to push to, for the current branch, may be further 746 overridden by `branch.<name>.pushremote`. If no remote is 747 configured, or if you are not on any branch, it defaults to 748 `origin` for fetching and `remote.pushdefault` for pushing. 749 Additionally, `.` (a period) is the current local repository 750 (a dot-repository), see `branch.<name>.merge`'s final note below. 751 752branch.<name>.pushremote:: 753 When on branch <name>, it overrides `branch.<name>.remote` for 754 pushing. It also overrides `remote.pushdefault` for pushing 755 from branch <name>. When you pull from one place (e.g. your 756 upstream) and push to another place (e.g. your own publishing 757 repository), you would want to set `remote.pushdefault` to 758 specify the remote to push to for all branches, and use this 759 option to override it for a specific branch. 760 761branch.<name>.merge:: 762 Defines, together with branch.<name>.remote, the upstream branch 763 for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which 764 branch to merge and can also affect 'git push' (see push.default). 765 When in branch <name>, it tells 'git fetch' the default 766 refspec to be marked for merging in FETCH_HEAD. The value is 767 handled like the remote part of a refspec, and must match a 768 ref which is fetched from the remote given by 769 "branch.<name>.remote". 770 The merge information is used by 'git pull' (which at first calls 771 'git fetch') to lookup the default branch for merging. Without 772 this option, 'git pull' defaults to merge the first refspec fetched. 773 Specify multiple values to get an octopus merge. 774 If you wish to setup 'git pull' so that it merges into <name> from 775 another branch in the local repository, you can point 776 branch.<name>.merge to the desired branch, and use the relative path 777 setting `.` (a period) for branch.<name>.remote. 778 779branch.<name>.mergeoptions:: 780 Sets default options for merging into branch <name>. The syntax and 781 supported options are the same as those of linkgit:git-merge[1], but 782 option values containing whitespace characters are currently not 783 supported. 784 785branch.<name>.rebase:: 786 When true, rebase the branch <name> on top of the fetched branch, 787 instead of merging the default branch from the default remote when 788 "git pull" is run. See "pull.rebase" for doing this in a non 789 branch-specific manner. 790+ 791 When preserve, also pass `--preserve-merges` along to 'git rebase' 792 so that locally committed merge commits will not be flattened 793 by running 'git pull'. 794+ 795*NOTE*: this is a possibly dangerous operation; do *not* use 796it unless you understand the implications (see linkgit:git-rebase[1] 797for details). 798 799branch.<name>.description:: 800 Branch description, can be edited with 801 `git branch --edit-description`. Branch description is 802 automatically added in the format-patch cover letter or 803 request-pull summary. 804 805browser.<tool>.cmd:: 806 Specify the command to invoke the specified browser. The 807 specified command is evaluated in shell with the URLs passed 808 as arguments. (See linkgit:git-web{litdd}browse[1].) 809 810browser.<tool>.path:: 811 Override the path for the given tool that may be used to 812 browse HTML help (see '-w' option in linkgit:git-help[1]) or a 813 working repository in gitweb (see linkgit:git-instaweb[1]). 814 815clean.requireForce:: 816 A boolean to make git-clean do nothing unless given -f, 817 -i or -n. Defaults to true. 818 819color.branch:: 820 A boolean to enable/disable color in the output of 821 linkgit:git-branch[1]. May be set to `always`, 822 `false` (or `never`) or `auto` (or `true`), in which case colors are used 823 only when the output is to a terminal. Defaults to false. 824 825color.branch.<slot>:: 826 Use customized color for branch coloration. `<slot>` is one of 827 `current` (the current branch), `local` (a local branch), 828 `remote` (a remote-tracking branch in refs/remotes/), 829 `upstream` (upstream tracking branch), `plain` (other 830 refs). 831+ 832The value for these configuration variables is a list of colors (at most 833two) and attributes (at most one), separated by spaces. The colors 834accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`, 835`magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`, 836`blink` and `reverse`. The first color given is the foreground; the 837second is the background. The position of the attribute, if any, 838doesn't matter. 839 840color.diff:: 841 Whether to use ANSI escape sequences to add color to patches. 842 If this is set to `always`, linkgit:git-diff[1], 843 linkgit:git-log[1], and linkgit:git-show[1] will use color 844 for all patches. If it is set to `true` or `auto`, those 845 commands will only use color when output is to the terminal. 846 Defaults to false. 847+ 848This does not affect linkgit:git-format-patch[1] or the 849'git-diff-{asterisk}' plumbing commands. Can be overridden on the 850command line with the `--color[=<when>]` option. 851 852color.diff.<slot>:: 853 Use customized color for diff colorization. `<slot>` specifies 854 which part of the patch to use the specified color, and is one 855 of `plain` (context text), `meta` (metainformation), `frag` 856 (hunk header), 'func' (function in hunk header), `old` (removed lines), 857 `new` (added lines), `commit` (commit headers), or `whitespace` 858 (highlighting whitespace errors). The values of these variables may be 859 specified as in color.branch.<slot>. 860 861color.decorate.<slot>:: 862 Use customized color for 'git log --decorate' output. `<slot>` is one 863 of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local 864 branches, remote-tracking branches, tags, stash and HEAD, respectively. 865 866color.grep:: 867 When set to `always`, always highlight matches. When `false` (or 868 `never`), never. When set to `true` or `auto`, use color only 869 when the output is written to the terminal. Defaults to `false`. 870 871color.grep.<slot>:: 872 Use customized color for grep colorization. `<slot>` specifies which 873 part of the line to use the specified color, and is one of 874+ 875-- 876`context`;; 877 non-matching text in context lines (when using `-A`, `-B`, or `-C`) 878`filename`;; 879 filename prefix (when not using `-h`) 880`function`;; 881 function name lines (when using `-p`) 882`linenumber`;; 883 line number prefix (when using `-n`) 884`match`;; 885 matching text 886`selected`;; 887 non-matching text in selected lines 888`separator`;; 889 separators between fields on a line (`:`, `-`, and `=`) 890 and between hunks (`--`) 891-- 892+ 893The values of these variables may be specified as in color.branch.<slot>. 894 895color.interactive:: 896 When set to `always`, always use colors for interactive prompts 897 and displays (such as those used by "git-add --interactive" and 898 "git-clean --interactive"). When false (or `never`), never. 899 When set to `true` or `auto`, use colors only when the output is 900 to the terminal. Defaults to false. 901 902color.interactive.<slot>:: 903 Use customized color for 'git add --interactive' and 'git clean 904 --interactive' output. `<slot>` may be `prompt`, `header`, `help` 905 or `error`, for four distinct types of normal output from 906 interactive commands. The values of these variables may be 907 specified as in color.branch.<slot>. 908 909color.pager:: 910 A boolean to enable/disable colored output when the pager is in 911 use (default is true). 912 913color.showbranch:: 914 A boolean to enable/disable color in the output of 915 linkgit:git-show-branch[1]. May be set to `always`, 916 `false` (or `never`) or `auto` (or `true`), in which case colors are used 917 only when the output is to a terminal. Defaults to false. 918 919color.status:: 920 A boolean to enable/disable color in the output of 921 linkgit:git-status[1]. May be set to `always`, 922 `false` (or `never`) or `auto` (or `true`), in which case colors are used 923 only when the output is to a terminal. Defaults to false. 924 925color.status.<slot>:: 926 Use customized color for status colorization. `<slot>` is 927 one of `header` (the header text of the status message), 928 `added` or `updated` (files which are added but not committed), 929 `changed` (files which are changed but not added in the index), 930 `untracked` (files which are not tracked by Git), 931 `branch` (the current branch), or 932 `nobranch` (the color the 'no branch' warning is shown in, defaulting 933 to red). The values of these variables may be specified as in 934 color.branch.<slot>. 935 936color.ui:: 937 This variable determines the default value for variables such 938 as `color.diff` and `color.grep` that control the use of color 939 per command family. Its scope will expand as more commands learn 940 configuration to set a default for the `--color` option. Set it 941 to `false` or `never` if you prefer Git commands not to use 942 color unless enabled explicitly with some other configuration 943 or the `--color` option. Set it to `always` if you want all 944 output not intended for machine consumption to use color, to 945 `true` or `auto` (this is the default since Git 1.8.4) if you 946 want such output to use color when written to the terminal. 947 948column.ui:: 949 Specify whether supported commands should output in columns. 950 This variable consists of a list of tokens separated by spaces 951 or commas: 952+ 953These options control when the feature should be enabled 954(defaults to 'never'): 955+ 956-- 957`always`;; 958 always show in columns 959`never`;; 960 never show in columns 961`auto`;; 962 show in columns if the output is to the terminal 963-- 964+ 965These options control layout (defaults to 'column'). Setting any 966of these implies 'always' if none of 'always', 'never', or 'auto' are 967specified. 968+ 969-- 970`column`;; 971 fill columns before rows 972`row`;; 973 fill rows before columns 974`plain`;; 975 show in one column 976-- 977+ 978Finally, these options can be combined with a layout option (defaults 979to 'nodense'): 980+ 981-- 982`dense`;; 983 make unequal size columns to utilize more space 984`nodense`;; 985 make equal size columns 986-- 987 988column.branch:: 989 Specify whether to output branch listing in `git branch` in columns. 990 See `column.ui` for details. 991 992column.clean:: 993 Specify the layout when list items in `git clean -i`, which always 994 shows files and directories in columns. See `column.ui` for details. 995 996column.status:: 997 Specify whether to output untracked files in `git status` in columns. 998 See `column.ui` for details. 9991000column.tag::1001 Specify whether to output tag listing in `git tag` in columns.1002 See `column.ui` for details.10031004commit.cleanup::1005 This setting overrides the default of the `--cleanup` option in1006 `git commit`. See linkgit:git-commit[1] for details. Changing the1007 default can be useful when you always want to keep lines that begin1008 with comment character `#` in your log message, in which case you1009 would do `git config commit.cleanup whitespace` (note that you will1010 have to remove the help lines that begin with `#` in the commit log1011 template yourself, if you do this).10121013commit.gpgsign::10141015 A boolean to specify whether all commits should be GPG signed.1016 Use of this option when doing operations such as rebase can1017 result in a large number of commits being signed. It may be1018 convenient to use an agent to avoid typing your GPG passphrase1019 several times.10201021commit.status::1022 A boolean to enable/disable inclusion of status information in the1023 commit message template when using an editor to prepare the commit1024 message. Defaults to true.10251026commit.template::1027 Specify a file to use as the template for new commit messages.1028 "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the1029 specified user's home directory.10301031credential.helper::1032 Specify an external helper to be called when a username or1033 password credential is needed; the helper may consult external1034 storage to avoid prompting the user for the credentials. See1035 linkgit:gitcredentials[7] for details.10361037credential.useHttpPath::1038 When acquiring credentials, consider the "path" component of an http1039 or https URL to be important. Defaults to false. See1040 linkgit:gitcredentials[7] for more information.10411042credential.username::1043 If no username is set for a network authentication, use this username1044 by default. See credential.<context>.* below, and1045 linkgit:gitcredentials[7].10461047credential.<url>.*::1048 Any of the credential.* options above can be applied selectively to1049 some credentials. For example "credential.https://example.com.username"1050 would set the default username only for https connections to1051 example.com. See linkgit:gitcredentials[7] for details on how URLs are1052 matched.10531054include::diff-config.txt[]10551056difftool.<tool>.path::1057 Override the path for the given tool. This is useful in case1058 your tool is not in the PATH.10591060difftool.<tool>.cmd::1061 Specify the command to invoke the specified diff tool.1062 The specified command is evaluated in shell with the following1063 variables available: 'LOCAL' is set to the name of the temporary1064 file containing the contents of the diff pre-image and 'REMOTE'1065 is set to the name of the temporary file containing the contents1066 of the diff post-image.10671068difftool.prompt::1069 Prompt before each invocation of the diff tool.10701071fetch.recurseSubmodules::1072 This option can be either set to a boolean value or to 'on-demand'.1073 Setting it to a boolean changes the behavior of fetch and pull to1074 unconditionally recurse into submodules when set to true or to not1075 recurse at all when set to false. When set to 'on-demand' (the default1076 value), fetch and pull will only recurse into a populated submodule1077 when its superproject retrieves a commit that updates the submodule's1078 reference.10791080fetch.fsckObjects::1081 If it is set to true, git-fetch-pack will check all fetched1082 objects. It will abort in the case of a malformed object or a1083 broken link. The result of an abort are only dangling objects.1084 Defaults to false. If not set, the value of `transfer.fsckObjects`1085 is used instead.10861087fetch.unpackLimit::1088 If the number of objects fetched over the Git native1089 transfer is below this1090 limit, then the objects will be unpacked into loose object1091 files. However if the number of received objects equals or1092 exceeds this limit then the received pack will be stored as1093 a pack, after adding any missing delta bases. Storing the1094 pack from a push can make the push operation complete faster,1095 especially on slow filesystems. If not set, the value of1096 `transfer.unpackLimit` is used instead.10971098fetch.prune::1099 If true, fetch will automatically behave as if the `--prune`1100 option was given on the command line. See also `remote.<name>.prune`.11011102format.attach::1103 Enable multipart/mixed attachments as the default for1104 'format-patch'. The value can also be a double quoted string1105 which will enable attachments as the default and set the1106 value as the boundary. See the --attach option in1107 linkgit:git-format-patch[1].11081109format.numbered::1110 A boolean which can enable or disable sequence numbers in patch1111 subjects. It defaults to "auto" which enables it only if there1112 is more than one patch. It can be enabled or disabled for all1113 messages by setting it to "true" or "false". See --numbered1114 option in linkgit:git-format-patch[1].11151116format.headers::1117 Additional email headers to include in a patch to be submitted1118 by mail. See linkgit:git-format-patch[1].11191120format.to::1121format.cc::1122 Additional recipients to include in a patch to be submitted1123 by mail. See the --to and --cc options in1124 linkgit:git-format-patch[1].11251126format.subjectprefix::1127 The default for format-patch is to output files with the '[PATCH]'1128 subject prefix. Use this variable to change that prefix.11291130format.signature::1131 The default for format-patch is to output a signature containing1132 the Git version number. Use this variable to change that default.1133 Set this variable to the empty string ("") to suppress1134 signature generation.11351136format.signaturefile::1137 Works just like format.signature except the contents of the1138 file specified by this variable will be used as the signature.11391140format.suffix::1141 The default for format-patch is to output files with the suffix1142 `.patch`. Use this variable to change that suffix (make sure to1143 include the dot if you want it).11441145format.pretty::1146 The default pretty format for log/show/whatchanged command,1147 See linkgit:git-log[1], linkgit:git-show[1],1148 linkgit:git-whatchanged[1].11491150format.thread::1151 The default threading style for 'git format-patch'. Can be1152 a boolean value, or `shallow` or `deep`. `shallow` threading1153 makes every mail a reply to the head of the series,1154 where the head is chosen from the cover letter, the1155 `--in-reply-to`, and the first patch mail, in this order.1156 `deep` threading makes every mail a reply to the previous one.1157 A true boolean value is the same as `shallow`, and a false1158 value disables threading.11591160format.signoff::1161 A boolean value which lets you enable the `-s/--signoff` option of1162 format-patch by default. *Note:* Adding the Signed-off-by: line to a1163 patch should be a conscious act and means that you certify you have1164 the rights to submit this work under the same open source license.1165 Please see the 'SubmittingPatches' document for further discussion.11661167format.coverLetter::1168 A boolean that controls whether to generate a cover-letter when1169 format-patch is invoked, but in addition can be set to "auto", to1170 generate a cover-letter only when there's more than one patch.11711172filter.<driver>.clean::1173 The command which is used to convert the content of a worktree1174 file to a blob upon checkin. See linkgit:gitattributes[5] for1175 details.11761177filter.<driver>.smudge::1178 The command which is used to convert the content of a blob1179 object to a worktree file upon checkout. See1180 linkgit:gitattributes[5] for details.11811182gc.aggressiveDepth::1183 The depth parameter used in the delta compression1184 algorithm used by 'git gc --aggressive'. This defaults1185 to 250.11861187gc.aggressiveWindow::1188 The window size parameter used in the delta compression1189 algorithm used by 'git gc --aggressive'. This defaults1190 to 250.11911192gc.auto::1193 When there are approximately more than this many loose1194 objects in the repository, `git gc --auto` will pack them.1195 Some Porcelain commands use this command to perform a1196 light-weight garbage collection from time to time. The1197 default value is 6700. Setting this to 0 disables it.11981199gc.autopacklimit::1200 When there are more than this many packs that are not1201 marked with `*.keep` file in the repository, `git gc1202 --auto` consolidates them into one larger pack. The1203 default value is 50. Setting this to 0 disables it.12041205gc.autodetach::1206 Make `git gc --auto` return immediately andrun in background1207 if the system supports it. Default is true.12081209gc.packrefs::1210 Running `git pack-refs` in a repository renders it1211 unclonable by Git versions prior to 1.5.1.2 over dumb1212 transports such as HTTP. This variable determines whether1213 'git gc' runs `git pack-refs`. This can be set to `notbare`1214 to enable it within all non-bare repos or it can be set to a1215 boolean value. The default is `true`.12161217gc.pruneexpire::1218 When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'.1219 Override the grace period with this config variable. The value1220 "now" may be used to disable this grace period and always prune1221 unreachable objects immediately.12221223gc.reflogexpire::1224gc.<pattern>.reflogexpire::1225 'git reflog expire' removes reflog entries older than1226 this time; defaults to 90 days. With "<pattern>" (e.g.1227 "refs/stash") in the middle the setting applies only to1228 the refs that match the <pattern>.12291230gc.reflogexpireunreachable::1231gc.<ref>.reflogexpireunreachable::1232 'git reflog expire' removes reflog entries older than1233 this time and are not reachable from the current tip;1234 defaults to 30 days. With "<pattern>" (e.g. "refs/stash")1235 in the middle, the setting applies only to the refs that1236 match the <pattern>.12371238gc.rerereresolved::1239 Records of conflicted merge you resolved earlier are1240 kept for this many days when 'git rerere gc' is run.1241 The default is 60 days. See linkgit:git-rerere[1].12421243gc.rerereunresolved::1244 Records of conflicted merge you have not resolved are1245 kept for this many days when 'git rerere gc' is run.1246 The default is 15 days. See linkgit:git-rerere[1].12471248gitcvs.commitmsgannotation::1249 Append this string to each commit message. Set to empty string1250 to disable this feature. Defaults to "via git-CVS emulator".12511252gitcvs.enabled::1253 Whether the CVS server interface is enabled for this repository.1254 See linkgit:git-cvsserver[1].12551256gitcvs.logfile::1257 Path to a log file where the CVS server interface well... logs1258 various stuff. See linkgit:git-cvsserver[1].12591260gitcvs.usecrlfattr::1261 If true, the server will look up the end-of-line conversion1262 attributes for files to determine the '-k' modes to use. If1263 the attributes force Git to treat a file as text,1264 the '-k' mode will be left blank so CVS clients will1265 treat it as text. If they suppress text conversion, the file1266 will be set with '-kb' mode, which suppresses any newline munging1267 the client might otherwise do. If the attributes do not allow1268 the file type to be determined, then 'gitcvs.allbinary' is1269 used. See linkgit:gitattributes[5].12701271gitcvs.allbinary::1272 This is used if 'gitcvs.usecrlfattr' does not resolve1273 the correct '-kb' mode to use. If true, all1274 unresolved files are sent to the client in1275 mode '-kb'. This causes the client to treat them1276 as binary files, which suppresses any newline munging it1277 otherwise might do. Alternatively, if it is set to "guess",1278 then the contents of the file are examined to decide if1279 it is binary, similar to 'core.autocrlf'.12801281gitcvs.dbname::1282 Database used by git-cvsserver to cache revision information1283 derived from the Git repository. The exact meaning depends on the1284 used database driver, for SQLite (which is the default driver) this1285 is a filename. Supports variable substitution (see1286 linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).1287 Default: '%Ggitcvs.%m.sqlite'12881289gitcvs.dbdriver::1290 Used Perl DBI driver. You can specify any available driver1291 for this here, but it might not work. git-cvsserver is tested1292 with 'DBD::SQLite', reported to work with 'DBD::Pg', and1293 reported *not* to work with 'DBD::mysql'. Experimental feature.1294 May not contain double colons (`:`). Default: 'SQLite'.1295 See linkgit:git-cvsserver[1].12961297gitcvs.dbuser, gitcvs.dbpass::1298 Database user and password. Only useful if setting 'gitcvs.dbdriver',1299 since SQLite has no concept of database users and/or passwords.1300 'gitcvs.dbuser' supports variable substitution (see1301 linkgit:git-cvsserver[1] for details).13021303gitcvs.dbTableNamePrefix::1304 Database table name prefix. Prepended to the names of any1305 database tables used, allowing a single database to be used1306 for several repositories. Supports variable substitution (see1307 linkgit:git-cvsserver[1] for details). Any non-alphabetic1308 characters will be replaced with underscores.13091310All gitcvs variables except for 'gitcvs.usecrlfattr' and1311'gitcvs.allbinary' can also be specified as1312'gitcvs.<access_method>.<varname>' (where 'access_method'1313is one of "ext" and "pserver") to make them apply only for the given1314access method.13151316gitweb.category::1317gitweb.description::1318gitweb.owner::1319gitweb.url::1320 See linkgit:gitweb[1] for description.13211322gitweb.avatar::1323gitweb.blame::1324gitweb.grep::1325gitweb.highlight::1326gitweb.patches::1327gitweb.pickaxe::1328gitweb.remote_heads::1329gitweb.showsizes::1330gitweb.snapshot::1331 See linkgit:gitweb.conf[5] for description.13321333grep.lineNumber::1334 If set to true, enable '-n' option by default.13351336grep.patternType::1337 Set the default matching behavior. Using a value of 'basic', 'extended',1338 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp',1339 '--fixed-strings', or '--perl-regexp' option accordingly, while the1340 value 'default' will return to the default matching behavior.13411342grep.extendedRegexp::1343 If set to true, enable '--extended-regexp' option by default. This1344 option is ignored when the 'grep.patternType' option is set to a value1345 other than 'default'.13461347gpg.program::1348 Use this custom program instead of "gpg" found on $PATH when1349 making or verifying a PGP signature. The program must support the1350 same command-line interface as GPG, namely, to verify a detached1351 signature, "gpg --verify $file - <$signature" is run, and the1352 program is expected to signal a good signature by exiting with1353 code 0, and to generate an ascii-armored detached signature, the1354 standard input of "gpg -bsau $key" is fed with the contents to be1355 signed, and the program is expected to send the result to its1356 standard output.13571358gui.commitmsgwidth::1359 Defines how wide the commit message window is in the1360 linkgit:git-gui[1]. "75" is the default.13611362gui.diffcontext::1363 Specifies how many context lines should be used in calls to diff1364 made by the linkgit:git-gui[1]. The default is "5".13651366gui.displayuntracked::1367 Determines if linkgit::git-gui[1] shows untracked files1368 in the file list. The default is "true".13691370gui.encoding::1371 Specifies the default encoding to use for displaying of1372 file contents in linkgit:git-gui[1] and linkgit:gitk[1].1373 It can be overridden by setting the 'encoding' attribute1374 for relevant files (see linkgit:gitattributes[5]).1375 If this option is not set, the tools default to the1376 locale encoding.13771378gui.matchtrackingbranch::1379 Determines if new branches created with linkgit:git-gui[1] should1380 default to tracking remote branches with matching names or1381 not. Default: "false".13821383gui.newbranchtemplate::1384 Is used as suggested name when creating new branches using the1385 linkgit:git-gui[1].13861387gui.pruneduringfetch::1388 "true" if linkgit:git-gui[1] should prune remote-tracking branches when1389 performing a fetch. The default value is "false".13901391gui.trustmtime::1392 Determines if linkgit:git-gui[1] should trust the file modification1393 timestamp or not. By default the timestamps are not trusted.13941395gui.spellingdictionary::1396 Specifies the dictionary used for spell checking commit messages in1397 the linkgit:git-gui[1]. When set to "none" spell checking is turned1398 off.13991400gui.fastcopyblame::1401 If true, 'git gui blame' uses `-C` instead of `-C -C` for original1402 location detection. It makes blame significantly faster on huge1403 repositories at the expense of less thorough copy detection.14041405gui.copyblamethreshold::1406 Specifies the threshold to use in 'git gui blame' original location1407 detection, measured in alphanumeric characters. See the1408 linkgit:git-blame[1] manual for more information on copy detection.14091410gui.blamehistoryctx::1411 Specifies the radius of history context in days to show in1412 linkgit:gitk[1] for the selected commit, when the `Show History1413 Context` menu item is invoked from 'git gui blame'. If this1414 variable is set to zero, the whole history is shown.14151416guitool.<name>.cmd::1417 Specifies the shell command line to execute when the corresponding item1418 of the linkgit:git-gui[1] `Tools` menu is invoked. This option is1419 mandatory for every tool. The command is executed from the root of1420 the working directory, and in the environment it receives the name of1421 the tool as 'GIT_GUITOOL', the name of the currently selected file as1422 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if1423 the head is detached, 'CUR_BRANCH' is empty).14241425guitool.<name>.needsfile::1426 Run the tool only if a diff is selected in the GUI. It guarantees1427 that 'FILENAME' is not empty.14281429guitool.<name>.noconsole::1430 Run the command silently, without creating a window to display its1431 output.14321433guitool.<name>.norescan::1434 Don't rescan the working directory for changes after the tool1435 finishes execution.14361437guitool.<name>.confirm::1438 Show a confirmation dialog before actually running the tool.14391440guitool.<name>.argprompt::1441 Request a string argument from the user, and pass it to the tool1442 through the 'ARGS' environment variable. Since requesting an1443 argument implies confirmation, the 'confirm' option has no effect1444 if this is enabled. If the option is set to 'true', 'yes', or '1',1445 the dialog uses a built-in generic prompt; otherwise the exact1446 value of the variable is used.14471448guitool.<name>.revprompt::1449 Request a single valid revision from the user, and set the1450 'REVISION' environment variable. In other aspects this option1451 is similar to 'argprompt', and can be used together with it.14521453guitool.<name>.revunmerged::1454 Show only unmerged branches in the 'revprompt' subdialog.1455 This is useful for tools similar to merge or rebase, but not1456 for things like checkout or reset.14571458guitool.<name>.title::1459 Specifies the title to use for the prompt dialog. The default1460 is the tool name.14611462guitool.<name>.prompt::1463 Specifies the general prompt string to display at the top of1464 the dialog, before subsections for 'argprompt' and 'revprompt'.1465 The default value includes the actual command.14661467help.browser::1468 Specify the browser that will be used to display help in the1469 'web' format. See linkgit:git-help[1].14701471help.format::1472 Override the default help format used by linkgit:git-help[1].1473 Values 'man', 'info', 'web' and 'html' are supported. 'man' is1474 the default. 'web' and 'html' are the same.14751476help.autocorrect::1477 Automatically correct and execute mistyped commands after1478 waiting for the given number of deciseconds (0.1 sec). If more1479 than one command can be deduced from the entered text, nothing1480 will be executed. If the value of this option is negative,1481 the corrected command will be executed immediately. If the1482 value is 0 - the command will be just shown but not executed.1483 This is the default.14841485help.htmlpath::1486 Specify the path where the HTML documentation resides. File system paths1487 and URLs are supported. HTML pages will be prefixed with this path when1488 help is displayed in the 'web' format. This defaults to the documentation1489 path of your Git installation.14901491http.proxy::1492 Override the HTTP proxy, normally configured using the 'http_proxy',1493 'https_proxy', and 'all_proxy' environment variables (see1494 `curl(1)`). This can be overridden on a per-remote basis; see1495 remote.<name>.proxy14961497http.cookiefile::1498 File containing previously stored cookie lines which should be used1499 in the Git http session, if they match the server. The file format1500 of the file to read cookies from should be plain HTTP headers or1501 the Netscape/Mozilla cookie file format (see linkgit:curl[1]).1502 NOTE that the file specified with http.cookiefile is only used as1503 input unless http.saveCookies is set.15041505http.savecookies::1506 If set, store cookies received during requests to the file specified by1507 http.cookiefile. Has no effect if http.cookiefile is unset.15081509http.sslVerify::1510 Whether to verify the SSL certificate when fetching or pushing1511 over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment1512 variable.15131514http.sslCert::1515 File containing the SSL certificate when fetching or pushing1516 over HTTPS. Can be overridden by the 'GIT_SSL_CERT' environment1517 variable.15181519http.sslKey::1520 File containing the SSL private key when fetching or pushing1521 over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment1522 variable.15231524http.sslCertPasswordProtected::1525 Enable Git's password prompt for the SSL certificate. Otherwise1526 OpenSSL will prompt the user, possibly many times, if the1527 certificate or private key is encrypted. Can be overridden by the1528 'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable.15291530http.sslCAInfo::1531 File containing the certificates to verify the peer with when1532 fetching or pushing over HTTPS. Can be overridden by the1533 'GIT_SSL_CAINFO' environment variable.15341535http.sslCAPath::1536 Path containing files with the CA certificates to verify the peer1537 with when fetching or pushing over HTTPS. Can be overridden1538 by the 'GIT_SSL_CAPATH' environment variable.15391540http.sslTry::1541 Attempt to use AUTH SSL/TLS and encrypted data transfers1542 when connecting via regular FTP protocol. This might be needed1543 if the FTP server requires it for security reasons or you wish1544 to connect securely whenever remote FTP server supports it.1545 Default is false since it might trigger certificate verification1546 errors on misconfigured servers.15471548http.maxRequests::1549 How many HTTP requests to launch in parallel. Can be overridden1550 by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5.15511552http.minSessions::1553 The number of curl sessions (counted across slots) to be kept across1554 requests. They will not be ended with curl_easy_cleanup() until1555 http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this1556 value will be capped at 1. Defaults to 1.15571558http.postBuffer::1559 Maximum size in bytes of the buffer used by smart HTTP1560 transports when POSTing data to the remote system.1561 For requests larger than this buffer size, HTTP/1.1 and1562 Transfer-Encoding: chunked is used to avoid creating a1563 massive pack file locally. Default is 1 MiB, which is1564 sufficient for most requests.15651566http.lowSpeedLimit, http.lowSpeedTime::1567 If the HTTP transfer speed is less than 'http.lowSpeedLimit'1568 for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.1569 Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and1570 'GIT_HTTP_LOW_SPEED_TIME' environment variables.15711572http.noEPSV::1573 A boolean which disables using of EPSV ftp command by curl.1574 This can helpful with some "poor" ftp servers which don't1575 support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV'1576 environment variable. Default is false (curl will use EPSV).15771578http.useragent::1579 The HTTP USER_AGENT string presented to an HTTP server. The default1580 value represents the version of the client Git such as git/1.7.1.1581 This option allows you to override this value to a more common value1582 such as Mozilla/4.0. This may be necessary, for instance, if1583 connecting through a firewall that restricts HTTP connections to a set1584 of common USER_AGENT strings (but not including those like git/1.7.1).1585 Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable.15861587http.<url>.*::1588 Any of the http.* options above can be applied selectively to some urls.1589 For a config key to match a URL, each element of the config key is1590 compared to that of the URL, in the following order:1591+1592--1593. Scheme (e.g., `https` in `https://example.com/`). This field1594 must match exactly between the config key and the URL.15951596. Host/domain name (e.g., `example.com` in `https://example.com/`).1597 This field must match exactly between the config key and the URL.15981599. Port number (e.g., `8080` in `http://example.com:8080/`).1600 This field must match exactly between the config key and the URL.1601 Omitted port numbers are automatically converted to the correct1602 default for the scheme before matching.16031604. Path (e.g., `repo.git` in `https://example.com/repo.git`). The1605 path field of the config key must match the path field of the URL1606 either exactly or as a prefix of slash-delimited path elements. This means1607 a config key with path `foo/` matches URL path `foo/bar`. A prefix can only1608 match on a slash (`/`) boundary. Longer matches take precedence (so a config1609 key with path `foo/bar` is a better match to URL path `foo/bar` than a config1610 key with just path `foo/`).16111612. User name (e.g., `user` in `https://user@example.com/repo.git`). If1613 the config key has a user name it must match the user name in the1614 URL exactly. If the config key does not have a user name, that1615 config key will match a URL with any user name (including none),1616 but at a lower precedence than a config key with a user name.1617--1618+1619The list above is ordered by decreasing precedence; a URL that matches1620a config key's path is preferred to one that matches its user name. For example,1621if the URL is `https://user@example.com/foo/bar` a config key match of1622`https://example.com/foo` will be preferred over a config key match of1623`https://user@example.com`.1624+1625All URLs are normalized before attempting any matching (the password part,1626if embedded in the URL, is always ignored for matching purposes) so that1627equivalent urls that are simply spelled differently will match properly.1628Environment variable settings always override any matches. The urls that are1629matched against are those given directly to Git commands. This means any URLs1630visited as a result of a redirection do not participate in matching.16311632i18n.commitEncoding::1633 Character encoding the commit messages are stored in; Git itself1634 does not care per se, but this information is necessary e.g. when1635 importing commits from emails or in the gitk graphical history1636 browser (and possibly at other places in the future or in other1637 porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'.16381639i18n.logOutputEncoding::1640 Character encoding the commit messages are converted to when1641 running 'git log' and friends.16421643imap::1644 The configuration variables in the 'imap' section are described1645 in linkgit:git-imap-send[1].16461647index.version::1648 Specify the version with which new index files should be1649 initialized. This does not affect existing repositories.16501651init.templatedir::1652 Specify the directory from which templates will be copied.1653 (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)16541655instaweb.browser::1656 Specify the program that will be used to browse your working1657 repository in gitweb. See linkgit:git-instaweb[1].16581659instaweb.httpd::1660 The HTTP daemon command-line to start gitweb on your working1661 repository. See linkgit:git-instaweb[1].16621663instaweb.local::1664 If true the web server started by linkgit:git-instaweb[1] will1665 be bound to the local IP (127.0.0.1).16661667instaweb.modulepath::1668 The default module path for linkgit:git-instaweb[1] to use1669 instead of /usr/lib/apache2/modules. Only used if httpd1670 is Apache.16711672instaweb.port::1673 The port number to bind the gitweb httpd to. See1674 linkgit:git-instaweb[1].16751676interactive.singlekey::1677 In interactive commands, allow the user to provide one-letter1678 input with a single key (i.e., without hitting enter).1679 Currently this is used by the `--patch` mode of1680 linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],1681 linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this1682 setting is silently ignored if portable keystroke input1683 is not available; requires the Perl module Term::ReadKey.16841685log.abbrevCommit::1686 If true, makes linkgit:git-log[1], linkgit:git-show[1], and1687 linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may1688 override this option with `--no-abbrev-commit`.16891690log.date::1691 Set the default date-time mode for the 'log' command.1692 Setting a value for log.date is similar to using 'git log''s1693 `--date` option. Possible values are `relative`, `local`,1694 `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1]1695 for details.16961697log.decorate::1698 Print out the ref names of any commits that are shown by the log1699 command. If 'short' is specified, the ref name prefixes 'refs/heads/',1700 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is1701 specified, the full ref name (including prefix) will be printed.1702 This is the same as the log commands '--decorate' option.17031704log.showroot::1705 If true, the initial commit will be shown as a big creation event.1706 This is equivalent to a diff against an empty tree.1707 Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which1708 normally hide the root commit will now show it. True by default.17091710log.mailmap::1711 If true, makes linkgit:git-log[1], linkgit:git-show[1], and1712 linkgit:git-whatchanged[1] assume `--use-mailmap`.17131714mailmap.file::1715 The location of an augmenting mailmap file. The default1716 mailmap, located in the root of the repository, is loaded1717 first, then the mailmap file pointed to by this variable.1718 The location of the mailmap file may be in a repository1719 subdirectory, or somewhere outside of the repository itself.1720 See linkgit:git-shortlog[1] and linkgit:git-blame[1].17211722mailmap.blob::1723 Like `mailmap.file`, but consider the value as a reference to a1724 blob in the repository. If both `mailmap.file` and1725 `mailmap.blob` are given, both are parsed, with entries from1726 `mailmap.file` taking precedence. In a bare repository, this1727 defaults to `HEAD:.mailmap`. In a non-bare repository, it1728 defaults to empty.17291730man.viewer::1731 Specify the programs that may be used to display help in the1732 'man' format. See linkgit:git-help[1].17331734man.<tool>.cmd::1735 Specify the command to invoke the specified man viewer. The1736 specified command is evaluated in shell with the man page1737 passed as argument. (See linkgit:git-help[1].)17381739man.<tool>.path::1740 Override the path for the given tool that may be used to1741 display help in the 'man' format. See linkgit:git-help[1].17421743include::merge-config.txt[]17441745mergetool.<tool>.path::1746 Override the path for the given tool. This is useful in case1747 your tool is not in the PATH.17481749mergetool.<tool>.cmd::1750 Specify the command to invoke the specified merge tool. The1751 specified command is evaluated in shell with the following1752 variables available: 'BASE' is the name of a temporary file1753 containing the common base of the files to be merged, if available;1754 'LOCAL' is the name of a temporary file containing the contents of1755 the file on the current branch; 'REMOTE' is the name of a temporary1756 file containing the contents of the file from the branch being1757 merged; 'MERGED' contains the name of the file to which the merge1758 tool should write the results of a successful merge.17591760mergetool.<tool>.trustExitCode::1761 For a custom merge command, specify whether the exit code of1762 the merge command can be used to determine whether the merge was1763 successful. If this is not set to true then the merge target file1764 timestamp is checked and the merge assumed to have been successful1765 if the file has been updated, otherwise the user is prompted to1766 indicate the success of the merge.17671768mergetool.meld.hasOutput::1769 Older versions of `meld` do not support the `--output` option.1770 Git will attempt to detect whether `meld` supports `--output`1771 by inspecting the output of `meld --help`. Configuring1772 `mergetool.meld.hasOutput` will make Git skip these checks and1773 use the configured value instead. Setting `mergetool.meld.hasOutput`1774 to `true` tells Git to unconditionally use the `--output` option,1775 and `false` avoids using `--output`.17761777mergetool.keepBackup::1778 After performing a merge, the original file with conflict markers1779 can be saved as a file with a `.orig` extension. If this variable1780 is set to `false` then this file is not preserved. Defaults to1781 `true` (i.e. keep the backup files).17821783mergetool.keepTemporaries::1784 When invoking a custom merge tool, Git uses a set of temporary1785 files to pass to the tool. If the tool returns an error and this1786 variable is set to `true`, then these temporary files will be1787 preserved, otherwise they will be removed after the tool has1788 exited. Defaults to `false`.17891790mergetool.prompt::1791 Prompt before each invocation of the merge resolution program.17921793notes.displayRef::1794 The (fully qualified) refname from which to show notes when1795 showing commit messages. The value of this variable can be set1796 to a glob, in which case notes from all matching refs will be1797 shown. You may also specify this configuration variable1798 several times. A warning will be issued for refs that do not1799 exist, but a glob that does not match any refs is silently1800 ignored.1801+1802This setting can be overridden with the `GIT_NOTES_DISPLAY_REF`1803environment variable, which must be a colon separated list of refs or1804globs.1805+1806The effective value of "core.notesRef" (possibly overridden by1807GIT_NOTES_REF) is also implicitly added to the list of refs to be1808displayed.18091810notes.rewrite.<command>::1811 When rewriting commits with <command> (currently `amend` or1812 `rebase`) and this variable is set to `true`, Git1813 automatically copies your notes from the original to the1814 rewritten commit. Defaults to `true`, but see1815 "notes.rewriteRef" below.18161817notes.rewriteMode::1818 When copying notes during a rewrite (see the1819 "notes.rewrite.<command>" option), determines what to do if1820 the target commit already has a note. Must be one of1821 `overwrite`, `concatenate`, or `ignore`. Defaults to1822 `concatenate`.1823+1824This setting can be overridden with the `GIT_NOTES_REWRITE_MODE`1825environment variable.18261827notes.rewriteRef::1828 When copying notes during a rewrite, specifies the (fully1829 qualified) ref whose notes should be copied. The ref may be a1830 glob, in which case notes in all matching refs will be copied.1831 You may also specify this configuration several times.1832+1833Does not have a default value; you must configure this variable to1834enable note rewriting. Set it to `refs/notes/commits` to enable1835rewriting for the default commit notes.1836+1837This setting can be overridden with the `GIT_NOTES_REWRITE_REF`1838environment variable, which must be a colon separated list of refs or1839globs.18401841pack.window::1842 The size of the window used by linkgit:git-pack-objects[1] when no1843 window size is given on the command line. Defaults to 10.18441845pack.depth::1846 The maximum delta depth used by linkgit:git-pack-objects[1] when no1847 maximum depth is given on the command line. Defaults to 50.18481849pack.windowMemory::1850 The window memory size limit used by linkgit:git-pack-objects[1]1851 when no limit is given on the command line. The value can be1852 suffixed with "k", "m", or "g". Defaults to 0, meaning no1853 limit.18541855pack.compression::1856 An integer -1..9, indicating the compression level for objects1857 in a pack file. -1 is the zlib default. 0 means no1858 compression, and 1..9 are various speed/size tradeoffs, 9 being1859 slowest. If not set, defaults to core.compression. If that is1860 not set, defaults to -1, the zlib default, which is "a default1861 compromise between speed and compression (currently equivalent1862 to level 6)."1863+1864Note that changing the compression level will not automatically recompress1865all existing objects. You can force recompression by passing the -F option1866to linkgit:git-repack[1].18671868pack.deltaCacheSize::1869 The maximum memory in bytes used for caching deltas in1870 linkgit:git-pack-objects[1] before writing them out to a pack.1871 This cache is used to speed up the writing object phase by not1872 having to recompute the final delta result once the best match1873 for all objects is found. Repacking large repositories on machines1874 which are tight with memory might be badly impacted by this though,1875 especially if this cache pushes the system into swapping.1876 A value of 0 means no limit. The smallest size of 1 byte may be1877 used to virtually disable this cache. Defaults to 256 MiB.18781879pack.deltaCacheLimit::1880 The maximum size of a delta, that is cached in1881 linkgit:git-pack-objects[1]. This cache is used to speed up the1882 writing object phase by not having to recompute the final delta1883 result once the best match for all objects is found. Defaults to 1000.18841885pack.threads::1886 Specifies the number of threads to spawn when searching for best1887 delta matches. This requires that linkgit:git-pack-objects[1]1888 be compiled with pthreads otherwise this option is ignored with a1889 warning. This is meant to reduce packing time on multiprocessor1890 machines. The required amount of memory for the delta search window1891 is however multiplied by the number of threads.1892 Specifying 0 will cause Git to auto-detect the number of CPU's1893 and set the number of threads accordingly.18941895pack.indexVersion::1896 Specify the default pack index version. Valid values are 1 for1897 legacy pack index used by Git versions prior to 1.5.2, and 2 for1898 the new pack index with capabilities for packs larger than 4 GB1899 as well as proper protection against the repacking of corrupted1900 packs. Version 2 is the default. Note that version 2 is enforced1901 and this config option ignored whenever the corresponding pack is1902 larger than 2 GB.1903+1904If you have an old Git that does not understand the version 2 `*.idx` file,1905cloning or fetching over a non native protocol (e.g. "http" and "rsync")1906that will copy both `*.pack` file and corresponding `*.idx` file from the1907other side may give you a repository that cannot be accessed with your1908older version of Git. If the `*.pack` file is smaller than 2 GB, however,1909you can use linkgit:git-index-pack[1] on the *.pack file to regenerate1910the `*.idx` file.19111912pack.packSizeLimit::1913 The maximum size of a pack. This setting only affects1914 packing to a file when repacking, i.e. the git:// protocol1915 is unaffected. It can be overridden by the `--max-pack-size`1916 option of linkgit:git-repack[1]. The minimum size allowed is1917 limited to 1 MiB. The default is unlimited.1918 Common unit suffixes of 'k', 'm', or 'g' are1919 supported.19201921pack.useBitmaps::1922 When true, git will use pack bitmaps (if available) when packing1923 to stdout (e.g., during the server side of a fetch). Defaults to1924 true. You should not generally need to turn this off unless1925 you are debugging pack bitmaps.19261927pack.writebitmaps::1928 This is a deprecated synonym for `repack.writeBitmaps`.19291930pack.writeBitmapHashCache::1931 When true, git will include a "hash cache" section in the bitmap1932 index (if one is written). This cache can be used to feed git's1933 delta heuristics, potentially leading to better deltas between1934 bitmapped and non-bitmapped objects (e.g., when serving a fetch1935 between an older, bitmapped pack and objects that have been1936 pushed since the last gc). The downside is that it consumes 41937 bytes per object of disk space, and that JGit's bitmap1938 implementation does not understand it, causing it to complain if1939 Git and JGit are used on the same repository. Defaults to false.19401941pager.<cmd>::1942 If the value is boolean, turns on or off pagination of the1943 output of a particular Git subcommand when writing to a tty.1944 Otherwise, turns on pagination for the subcommand using the1945 pager specified by the value of `pager.<cmd>`. If `--paginate`1946 or `--no-pager` is specified on the command line, it takes1947 precedence over this option. To disable pagination for all1948 commands, set `core.pager` or `GIT_PAGER` to `cat`.19491950pretty.<name>::1951 Alias for a --pretty= format string, as specified in1952 linkgit:git-log[1]. Any aliases defined here can be used just1953 as the built-in pretty formats could. For example,1954 running `git config pretty.changelog "format:* %H %s"`1955 would cause the invocation `git log --pretty=changelog`1956 to be equivalent to running `git log "--pretty=format:* %H %s"`.1957 Note that an alias with the same name as a built-in format1958 will be silently ignored.19591960pull.ff::1961 By default, Git does not create an extra merge commit when merging1962 a commit that is a descendant of the current commit. Instead, the1963 tip of the current branch is fast-forwarded. When set to `false`,1964 this variable tells Git to create an extra merge commit in such1965 a case (equivalent to giving the `--no-ff` option from the command1966 line). When set to `only`, only such fast-forward merges are1967 allowed (equivalent to giving the `--ff-only` option from the1968 command line).19691970pull.rebase::1971 When true, rebase branches on top of the fetched branch, instead1972 of merging the default branch from the default remote when "git1973 pull" is run. See "branch.<name>.rebase" for setting this on a1974 per-branch basis.1975+1976 When preserve, also pass `--preserve-merges` along to 'git rebase'1977 so that locally committed merge commits will not be flattened1978 by running 'git pull'.1979+1980*NOTE*: this is a possibly dangerous operation; do *not* use1981it unless you understand the implications (see linkgit:git-rebase[1]1982for details).19831984pull.octopus::1985 The default merge strategy to use when pulling multiple branches1986 at once.19871988pull.twohead::1989 The default merge strategy to use when pulling a single branch.19901991push.default::1992 Defines the action `git push` should take if no refspec is1993 explicitly given. Different values are well-suited for1994 specific workflows; for instance, in a purely central workflow1995 (i.e. the fetch source is equal to the push destination),1996 `upstream` is probably what you want. Possible values are:1997+1998--19992000* `nothing` - do not push anything (error out) unless a refspec is2001 explicitly given. This is primarily meant for people who want to2002 avoid mistakes by always being explicit.20032004* `current` - push the current branch to update a branch with the same2005 name on the receiving end. Works in both central and non-central2006 workflows.20072008* `upstream` - push the current branch back to the branch whose2009 changes are usually integrated into the current branch (which is2010 called `@{upstream}`). This mode only makes sense if you are2011 pushing to the same repository you would normally pull from2012 (i.e. central workflow).20132014* `simple` - in centralized workflow, work like `upstream` with an2015 added safety to refuse to push if the upstream branch's name is2016 different from the local one.2017+2018When pushing to a remote that is different from the remote you normally2019pull from, work as `current`. This is the safest option and is suited2020for beginners.2021+2022This mode has become the default in Git 2.0.20232024* `matching` - push all branches having the same name on both ends.2025 This makes the repository you are pushing to remember the set of2026 branches that will be pushed out (e.g. if you always push 'maint'2027 and 'master' there and no other branches, the repository you push2028 to will have these two branches, and your local 'maint' and2029 'master' will be pushed there).2030+2031To use this mode effectively, you have to make sure _all_ the2032branches you would push out are ready to be pushed out before2033running 'git push', as the whole point of this mode is to allow you2034to push all of the branches in one go. If you usually finish work2035on only one branch and push out the result, while other branches are2036unfinished, this mode is not for you. Also this mode is not2037suitable for pushing into a shared central repository, as other2038people may add new branches there, or update the tip of existing2039branches outside your control.2040+2041This used to be the default, but not since Git 2.0 (`simple` is the2042new default).20432044--20452046rebase.stat::2047 Whether to show a diffstat of what changed upstream since the last2048 rebase. False by default.20492050rebase.autosquash::2051 If set to true enable '--autosquash' option by default.20522053rebase.autostash::2054 When set to true, automatically create a temporary stash2055 before the operation begins, and apply it after the operation2056 ends. This means that you can run rebase on a dirty worktree.2057 However, use with care: the final stash application after a2058 successful rebase might result in non-trivial conflicts.2059 Defaults to false.20602061receive.autogc::2062 By default, git-receive-pack will run "git-gc --auto" after2063 receiving data from git-push and updating refs. You can stop2064 it by setting this variable to false.20652066receive.fsckObjects::2067 If it is set to true, git-receive-pack will check all received2068 objects. It will abort in the case of a malformed object or a2069 broken link. The result of an abort are only dangling objects.2070 Defaults to false. If not set, the value of `transfer.fsckObjects`2071 is used instead.20722073receive.unpackLimit::2074 If the number of objects received in a push is below this2075 limit then the objects will be unpacked into loose object2076 files. However if the number of received objects equals or2077 exceeds this limit then the received pack will be stored as2078 a pack, after adding any missing delta bases. Storing the2079 pack from a push can make the push operation complete faster,2080 especially on slow filesystems. If not set, the value of2081 `transfer.unpackLimit` is used instead.20822083receive.denyDeletes::2084 If set to true, git-receive-pack will deny a ref update that deletes2085 the ref. Use this to prevent such a ref deletion via a push.20862087receive.denyDeleteCurrent::2088 If set to true, git-receive-pack will deny a ref update that2089 deletes the currently checked out branch of a non-bare repository.20902091receive.denyCurrentBranch::2092 If set to true or "refuse", git-receive-pack will deny a ref update2093 to the currently checked out branch of a non-bare repository.2094 Such a push is potentially dangerous because it brings the HEAD2095 out of sync with the index and working tree. If set to "warn",2096 print a warning of such a push to stderr, but allow the push to2097 proceed. If set to false or "ignore", allow such pushes with no2098 message. Defaults to "refuse".20992100receive.denyNonFastForwards::2101 If set to true, git-receive-pack will deny a ref update which is2102 not a fast-forward. Use this to prevent such an update via a push,2103 even if that push is forced. This configuration variable is2104 set when initializing a shared repository.21052106receive.hiderefs::2107 String(s) `receive-pack` uses to decide which refs to omit2108 from its initial advertisement. Use more than one2109 definitions to specify multiple prefix strings. A ref that2110 are under the hierarchies listed on the value of this2111 variable is excluded, and is hidden when responding to `git2112 push`, and an attempt to update or delete a hidden ref by2113 `git push` is rejected.21142115receive.updateserverinfo::2116 If set to true, git-receive-pack will run git-update-server-info2117 after receiving data from git-push and updating refs.21182119receive.shallowupdate::2120 If set to true, .git/shallow can be updated when new refs2121 require new shallow roots. Otherwise those refs are rejected.21222123remote.pushdefault::2124 The remote to push to by default. Overrides2125 `branch.<name>.remote` for all branches, and is overridden by2126 `branch.<name>.pushremote` for specific branches.21272128remote.<name>.url::2129 The URL of a remote repository. See linkgit:git-fetch[1] or2130 linkgit:git-push[1].21312132remote.<name>.pushurl::2133 The push URL of a remote repository. See linkgit:git-push[1].21342135remote.<name>.proxy::2136 For remotes that require curl (http, https and ftp), the URL to2137 the proxy to use for that remote. Set to the empty string to2138 disable proxying for that remote.21392140remote.<name>.fetch::2141 The default set of "refspec" for linkgit:git-fetch[1]. See2142 linkgit:git-fetch[1].21432144remote.<name>.push::2145 The default set of "refspec" for linkgit:git-push[1]. See2146 linkgit:git-push[1].21472148remote.<name>.mirror::2149 If true, pushing to this remote will automatically behave2150 as if the `--mirror` option was given on the command line.21512152remote.<name>.skipDefaultUpdate::2153 If true, this remote will be skipped by default when updating2154 using linkgit:git-fetch[1] or the `update` subcommand of2155 linkgit:git-remote[1].21562157remote.<name>.skipFetchAll::2158 If true, this remote will be skipped by default when updating2159 using linkgit:git-fetch[1] or the `update` subcommand of2160 linkgit:git-remote[1].21612162remote.<name>.receivepack::2163 The default program to execute on the remote side when pushing. See2164 option \--receive-pack of linkgit:git-push[1].21652166remote.<name>.uploadpack::2167 The default program to execute on the remote side when fetching. See2168 option \--upload-pack of linkgit:git-fetch-pack[1].21692170remote.<name>.tagopt::2171 Setting this value to \--no-tags disables automatic tag following when2172 fetching from remote <name>. Setting it to \--tags will fetch every2173 tag from remote <name>, even if they are not reachable from remote2174 branch heads. Passing these flags directly to linkgit:git-fetch[1] can2175 override this setting. See options \--tags and \--no-tags of2176 linkgit:git-fetch[1].21772178remote.<name>.vcs::2179 Setting this to a value <vcs> will cause Git to interact with2180 the remote with the git-remote-<vcs> helper.21812182remote.<name>.prune::2183 When set to true, fetching from this remote by default will also2184 remove any remote-tracking references that no longer exist on the2185 remote (as if the `--prune` option was given on the command line).2186 Overrides `fetch.prune` settings, if any.21872188remotes.<group>::2189 The list of remotes which are fetched by "git remote update2190 <group>". See linkgit:git-remote[1].21912192repack.usedeltabaseoffset::2193 By default, linkgit:git-repack[1] creates packs that use2194 delta-base offset. If you need to share your repository with2195 Git older than version 1.4.4, either directly or via a dumb2196 protocol such as http, then you need to set this option to2197 "false" and repack. Access from old Git versions over the2198 native protocol are unaffected by this option.21992200repack.packKeptObjects::2201 If set to true, makes `git repack` act as if2202 `--pack-kept-objects` was passed. See linkgit:git-repack[1] for2203 details. Defaults to `false` normally, but `true` if a bitmap2204 index is being written (either via `--write-bitmap-index` or2205 `repack.writeBitmaps`).22062207repack.writeBitmaps::2208 When true, git will write a bitmap index when packing all2209 objects to disk (e.g., when `git repack -a` is run). This2210 index can speed up the "counting objects" phase of subsequent2211 packs created for clones and fetches, at the cost of some disk2212 space and extra time spent on the initial repack. Defaults to2213 false.22142215rerere.autoupdate::2216 When set to true, `git-rerere` updates the index with the2217 resulting contents after it cleanly resolves conflicts using2218 previously recorded resolution. Defaults to false.22192220rerere.enabled::2221 Activate recording of resolved conflicts, so that identical2222 conflict hunks can be resolved automatically, should they be2223 encountered again. By default, linkgit:git-rerere[1] is2224 enabled if there is an `rr-cache` directory under the2225 `$GIT_DIR`, e.g. if "rerere" was previously used in the2226 repository.22272228sendemail.identity::2229 A configuration identity. When given, causes values in the2230 'sendemail.<identity>' subsection to take precedence over2231 values in the 'sendemail' section. The default identity is2232 the value of 'sendemail.identity'.22332234sendemail.smtpencryption::2235 See linkgit:git-send-email[1] for description. Note that this2236 setting is not subject to the 'identity' mechanism.22372238sendemail.smtpssl::2239 Deprecated alias for 'sendemail.smtpencryption = ssl'.22402241sendemail.smtpsslcertpath::2242 Path to ca-certificates (either a directory or a single file).2243 Set it to an empty string to disable certificate verification.22442245sendemail.<identity>.*::2246 Identity-specific versions of the 'sendemail.*' parameters2247 found below, taking precedence over those when the this2248 identity is selected, through command-line or2249 'sendemail.identity'.22502251sendemail.aliasesfile::2252sendemail.aliasfiletype::2253sendemail.annotate::2254sendemail.bcc::2255sendemail.cc::2256sendemail.cccmd::2257sendemail.chainreplyto::2258sendemail.confirm::2259sendemail.envelopesender::2260sendemail.from::2261sendemail.multiedit::2262sendemail.signedoffbycc::2263sendemail.smtppass::2264sendemail.suppresscc::2265sendemail.suppressfrom::2266sendemail.to::2267sendemail.smtpdomain::2268sendemail.smtpserver::2269sendemail.smtpserverport::2270sendemail.smtpserveroption::2271sendemail.smtpuser::2272sendemail.thread::2273sendemail.validate::2274 See linkgit:git-send-email[1] for description.22752276sendemail.signedoffcc::2277 Deprecated alias for 'sendemail.signedoffbycc'.22782279showbranch.default::2280 The default set of branches for linkgit:git-show-branch[1].2281 See linkgit:git-show-branch[1].22822283status.relativePaths::2284 By default, linkgit:git-status[1] shows paths relative to the2285 current directory. Setting this variable to `false` shows paths2286 relative to the repository root (this was the default for Git2287 prior to v1.5.4).22882289status.short::2290 Set to true to enable --short by default in linkgit:git-status[1].2291 The option --no-short takes precedence over this variable.22922293status.branch::2294 Set to true to enable --branch by default in linkgit:git-status[1].2295 The option --no-branch takes precedence over this variable.22962297status.displayCommentPrefix::2298 If set to true, linkgit:git-status[1] will insert a comment2299 prefix before each output line (starting with2300 `core.commentChar`, i.e. `#` by default). This was the2301 behavior of linkgit:git-status[1] in Git 1.8.4 and previous.2302 Defaults to false.23032304status.showUntrackedFiles::2305 By default, linkgit:git-status[1] and linkgit:git-commit[1] show2306 files which are not currently tracked by Git. Directories which2307 contain only untracked files, are shown with the directory name2308 only. Showing untracked files means that Git needs to lstat() all2309 the files in the whole repository, which might be slow on some2310 systems. So, this variable controls how the commands displays2311 the untracked files. Possible values are:2312+2313--2314* `no` - Show no untracked files.2315* `normal` - Show untracked files and directories.2316* `all` - Show also individual files in untracked directories.2317--2318+2319If this variable is not specified, it defaults to 'normal'.2320This variable can be overridden with the -u|--untracked-files option2321of linkgit:git-status[1] and linkgit:git-commit[1].23222323status.submodulesummary::2324 Defaults to false.2325 If this is set to a non zero number or true (identical to -1 or an2326 unlimited number), the submodule summary will be enabled and a2327 summary of commits for modified submodules will be shown (see2328 --summary-limit option of linkgit:git-submodule[1]). Please note2329 that the summary output command will be suppressed for all2330 submodules when `diff.ignoreSubmodules` is set to 'all' or only2331 for those submodules where `submodule.<name>.ignore=all`. The only2332 exception to that rule is that status and commit will show staged2333 submodule changes. To2334 also view the summary for ignored submodules you can either use2335 the --ignore-submodules=dirty command-line option or the 'git2336 submodule summary' command, which shows a similar output but does2337 not honor these settings.23382339submodule.<name>.path::2340submodule.<name>.url::2341submodule.<name>.update::2342 The path within this project, URL, and the updating strategy2343 for a submodule. These variables are initially populated2344 by 'git submodule init'; edit them to override the2345 URL and other values found in the `.gitmodules` file. See2346 linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.23472348submodule.<name>.branch::2349 The remote branch name for a submodule, used by `git submodule2350 update --remote`. Set this option to override the value found in2351 the `.gitmodules` file. See linkgit:git-submodule[1] and2352 linkgit:gitmodules[5] for details.23532354submodule.<name>.fetchRecurseSubmodules::2355 This option can be used to control recursive fetching of this2356 submodule. It can be overridden by using the --[no-]recurse-submodules2357 command-line option to "git fetch" and "git pull".2358 This setting will override that from in the linkgit:gitmodules[5]2359 file.23602361submodule.<name>.ignore::2362 Defines under what circumstances "git status" and the diff family show2363 a submodule as modified. When set to "all", it will never be considered2364 modified (but it will nonetheless show up in the output of status and2365 commit when it has been staged), "dirty" will ignore all changes2366 to the submodules work tree and2367 takes only differences between the HEAD of the submodule and the commit2368 recorded in the superproject into account. "untracked" will additionally2369 let submodules with modified tracked files in their work tree show up.2370 Using "none" (the default when this option is not set) also shows2371 submodules that have untracked files in their work tree as changed.2372 This setting overrides any setting made in .gitmodules for this submodule,2373 both settings can be overridden on the command line by using the2374 "--ignore-submodules" option. The 'git submodule' commands are not2375 affected by this setting.23762377tag.sort::2378 This variable controls the sort ordering of tags when displayed by2379 linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the2380 value of this variable will be used as the default.23812382tar.umask::2383 This variable can be used to restrict the permission bits of2384 tar archive entries. The default is 0002, which turns off the2385 world write bit. The special value "user" indicates that the2386 archiving user's umask will be used instead. See umask(2) and2387 linkgit:git-archive[1].23882389transfer.fsckObjects::2390 When `fetch.fsckObjects` or `receive.fsckObjects` are2391 not set, the value of this variable is used instead.2392 Defaults to false.23932394transfer.hiderefs::2395 This variable can be used to set both `receive.hiderefs`2396 and `uploadpack.hiderefs` at the same time to the same2397 values. See entries for these other variables.23982399transfer.unpackLimit::2400 When `fetch.unpackLimit` or `receive.unpackLimit` are2401 not set, the value of this variable is used instead.2402 The default value is 100.24032404uploadarchive.allowUnreachable::2405 If true, allow clients to use `git archive --remote` to request2406 any tree, whether reachable from the ref tips or not. See the2407 discussion in the `SECURITY` section of2408 linkgit:git-upload-archive[1] for more details. Defaults to2409 `false`.24102411uploadpack.hiderefs::2412 String(s) `upload-pack` uses to decide which refs to omit2413 from its initial advertisement. Use more than one2414 definitions to specify multiple prefix strings. A ref that2415 are under the hierarchies listed on the value of this2416 variable is excluded, and is hidden from `git ls-remote`,2417 `git fetch`, etc. An attempt to fetch a hidden ref by `git2418 fetch` will fail. See also `uploadpack.allowtipsha1inwant`.24192420uploadpack.allowtipsha1inwant::2421 When `uploadpack.hiderefs` is in effect, allow `upload-pack`2422 to accept a fetch request that asks for an object at the tip2423 of a hidden ref (by default, such a request is rejected).2424 see also `uploadpack.hiderefs`.24252426uploadpack.keepalive::2427 When `upload-pack` has started `pack-objects`, there may be a2428 quiet period while `pack-objects` prepares the pack. Normally2429 it would output progress information, but if `--quiet` was used2430 for the fetch, `pack-objects` will output nothing at all until2431 the pack data begins. Some clients and networks may consider2432 the server to be hung and give up. Setting this option instructs2433 `upload-pack` to send an empty keepalive packet every2434 `uploadpack.keepalive` seconds. Setting this option to 02435 disables keepalive packets entirely. The default is 5 seconds.24362437url.<base>.insteadOf::2438 Any URL that starts with this value will be rewritten to2439 start, instead, with <base>. In cases where some site serves a2440 large number of repositories, and serves them with multiple2441 access methods, and some users need to use different access2442 methods, this feature allows people to specify any of the2443 equivalent URLs and have Git automatically rewrite the URL to2444 the best alternative for the particular user, even for a2445 never-before-seen repository on the site. When more than one2446 insteadOf strings match a given URL, the longest match is used.24472448url.<base>.pushInsteadOf::2449 Any URL that starts with this value will not be pushed to;2450 instead, it will be rewritten to start with <base>, and the2451 resulting URL will be pushed to. In cases where some site serves2452 a large number of repositories, and serves them with multiple2453 access methods, some of which do not allow push, this feature2454 allows people to specify a pull-only URL and have Git2455 automatically use an appropriate URL to push, even for a2456 never-before-seen repository on the site. When more than one2457 pushInsteadOf strings match a given URL, the longest match is2458 used. If a remote has an explicit pushurl, Git will ignore this2459 setting for that remote.24602461user.email::2462 Your email address to be recorded in any newly created commits.2463 Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and2464 'EMAIL' environment variables. See linkgit:git-commit-tree[1].24652466user.name::2467 Your full name to be recorded in any newly created commits.2468 Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME'2469 environment variables. See linkgit:git-commit-tree[1].24702471user.signingkey::2472 If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the2473 key you want it to automatically when creating a signed tag or2474 commit, you can override the default selection with this variable.2475 This option is passed unchanged to gpg's --local-user parameter,2476 so you may specify a key using any method that gpg supports.24772478web.browser::2479 Specify a web browser that may be used by some commands.2480 Currently only linkgit:git-instaweb[1] and linkgit:git-help[1]2481 may use it.