1// Please don't remove this comment as asciidoc behaves badly when 2// the first non-empty line is ifdef/ifndef. The symptom is that 3// without this comment the <git-diff-core> attribute conditionally 4// defined below ends up being defined unconditionally. 5// Last checked with asciidoc 7.0.2. 6 7ifndef::git-format-patch[] 8ifndef::git-diff[] 9ifndef::git-log[] 10:git-diff-core: 1 11endif::git-log[] 12endif::git-diff[] 13endif::git-format-patch[] 14 15ifdef::git-format-patch[] 16-p:: 17--no-stat:: 18 Generate plain patches without any diffstats. 19endif::git-format-patch[] 20 21ifndef::git-format-patch[] 22-p:: 23-u:: 24--patch:: 25 Generate patch (see section on generating patches). 26ifdef::git-diff[] 27 This is the default. 28endif::git-diff[] 29 30-s:: 31--no-patch:: 32 Suppress diff output. Useful for commands like `git show` that 33 show the patch by default, or to cancel the effect of `--patch`. 34endif::git-format-patch[] 35 36-U<n>:: 37--unified=<n>:: 38 Generate diffs with <n> lines of context instead of 39 the usual three. 40ifndef::git-format-patch[] 41 Implies `-p`. 42endif::git-format-patch[] 43 44ifndef::git-format-patch[] 45--raw:: 46ifndef::git-log[] 47 Generate the diff in raw format. 48ifdef::git-diff-core[] 49 This is the default. 50endif::git-diff-core[] 51endif::git-log[] 52ifdef::git-log[] 53 For each commit, show a summary of changes using the raw diff 54 format. See the "RAW OUTPUT FORMAT" section of 55 linkgit:git-diff[1]. This is different from showing the log 56 itself in raw format, which you can achieve with 57 `--format=raw`. 58endif::git-log[] 59endif::git-format-patch[] 60 61ifndef::git-format-patch[] 62--patch-with-raw:: 63 Synonym for `-p --raw`. 64endif::git-format-patch[] 65 66--compaction-heuristic:: 67--no-compaction-heuristic:: 68 These are to help debugging and tuning an experimental 69 heuristic (which is off by default) that shifts the hunk 70 boundary in an attempt to make the resulting patch easier 71 to read. 72 73--minimal:: 74 Spend extra time to make sure the smallest possible 75 diff is produced. 76 77--patience:: 78 Generate a diff using the "patience diff" algorithm. 79 80--histogram:: 81 Generate a diff using the "histogram diff" algorithm. 82 83--diff-algorithm={patience|minimal|histogram|myers}:: 84 Choose a diff algorithm. The variants are as follows: 85+ 86-- 87`default`, `myers`;; 88 The basic greedy diff algorithm. Currently, this is the default. 89`minimal`;; 90 Spend extra time to make sure the smallest possible diff is 91 produced. 92`patience`;; 93 Use "patience diff" algorithm when generating patches. 94`histogram`;; 95 This algorithm extends the patience algorithm to "support 96 low-occurrence common elements". 97-- 98+ 99For instance, if you configured diff.algorithm variable to a 100non-default value and want to use the default one, then you 101have to use `--diff-algorithm=default` option. 102 103--stat[=<width>[,<name-width>[,<count>]]]:: 104 Generate a diffstat. By default, as much space as necessary 105 will be used for the filename part, and the rest for the graph 106 part. Maximum width defaults to terminal width, or 80 columns 107 if not connected to a terminal, and can be overridden by 108 `<width>`. The width of the filename part can be limited by 109 giving another width `<name-width>` after a comma. The width 110 of the graph part can be limited by using 111 `--stat-graph-width=<width>` (affects all commands generating 112 a stat graph) or by setting `diff.statGraphWidth=<width>` 113 (does not affect `git format-patch`). 114 By giving a third parameter `<count>`, you can limit the 115 output to the first `<count>` lines, followed by `...` if 116 there are more. 117+ 118These parameters can also be set individually with `--stat-width=<width>`, 119`--stat-name-width=<name-width>` and `--stat-count=<count>`. 120 121--numstat:: 122 Similar to `--stat`, but shows number of added and 123 deleted lines in decimal notation and pathname without 124 abbreviation, to make it more machine friendly. For 125 binary files, outputs two `-` instead of saying 126 `0 0`. 127 128--shortstat:: 129 Output only the last line of the `--stat` format containing total 130 number of modified files, as well as number of added and deleted 131 lines. 132 133--dirstat[=<param1,param2,...>]:: 134 Output the distribution of relative amount of changes for each 135 sub-directory. The behavior of `--dirstat` can be customized by 136 passing it a comma separated list of parameters. 137 The defaults are controlled by the `diff.dirstat` configuration 138 variable (see linkgit:git-config[1]). 139 The following parameters are available: 140+ 141-- 142`changes`;; 143 Compute the dirstat numbers by counting the lines that have been 144 removed from the source, or added to the destination. This ignores 145 the amount of pure code movements within a file. In other words, 146 rearranging lines in a file is not counted as much as other changes. 147 This is the default behavior when no parameter is given. 148`lines`;; 149 Compute the dirstat numbers by doing the regular line-based diff 150 analysis, and summing the removed/added line counts. (For binary 151 files, count 64-byte chunks instead, since binary files have no 152 natural concept of lines). This is a more expensive `--dirstat` 153 behavior than the `changes` behavior, but it does count rearranged 154 lines within a file as much as other changes. The resulting output 155 is consistent with what you get from the other `--*stat` options. 156`files`;; 157 Compute the dirstat numbers by counting the number of files changed. 158 Each changed file counts equally in the dirstat analysis. This is 159 the computationally cheapest `--dirstat` behavior, since it does 160 not have to look at the file contents at all. 161`cumulative`;; 162 Count changes in a child directory for the parent directory as well. 163 Note that when using `cumulative`, the sum of the percentages 164 reported may exceed 100%. The default (non-cumulative) behavior can 165 be specified with the `noncumulative` parameter. 166<limit>;; 167 An integer parameter specifies a cut-off percent (3% by default). 168 Directories contributing less than this percentage of the changes 169 are not shown in the output. 170-- 171+ 172Example: The following will count changed files, while ignoring 173directories with less than 10% of the total amount of changed files, 174and accumulating child directory counts in the parent directories: 175`--dirstat=files,10,cumulative`. 176 177--summary:: 178 Output a condensed summary of extended header information 179 such as creations, renames and mode changes. 180 181ifndef::git-format-patch[] 182--patch-with-stat:: 183 Synonym for `-p --stat`. 184endif::git-format-patch[] 185 186ifndef::git-format-patch[] 187 188-z:: 189ifdef::git-log[] 190 Separate the commits with NULs instead of with new newlines. 191+ 192Also, when `--raw` or `--numstat` has been given, do not munge 193pathnames and use NULs as output field terminators. 194endif::git-log[] 195ifndef::git-log[] 196 When `--raw`, `--numstat`, `--name-only` or `--name-status` has been 197 given, do not munge pathnames and use NULs as output field terminators. 198endif::git-log[] 199+ 200Without this option, each pathname output will have TAB, LF, double quotes, 201and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, 202respectively, and the pathname will be enclosed in double quotes if 203any of those replacements occurred. 204 205--name-only:: 206 Show only names of changed files. 207 208--name-status:: 209 Show only names and status of changed files. See the description 210 of the `--diff-filter` option on what the status letters mean. 211 212--submodule[=<format>]:: 213 Specify how differences in submodules are shown. When `--submodule` 214 or `--submodule=log` is given, the 'log' format is used. This format lists 215 the commits in the range like linkgit:git-submodule[1] `summary` does. 216 Omitting the `--submodule` option or specifying `--submodule=short`, 217 uses the 'short' format. This format just shows the names of the commits 218 at the beginning and end of the range. Can be tweaked via the 219 `diff.submodule` configuration variable. 220 221--color[=<when>]:: 222 Show colored diff. 223 `--color` (i.e. without '=<when>') is the same as `--color=always`. 224 '<when>' can be one of `always`, `never`, or `auto`. 225ifdef::git-diff[] 226 It can be changed by the `color.ui` and `color.diff` 227 configuration settings. 228endif::git-diff[] 229 230--no-color:: 231 Turn off colored diff. 232ifdef::git-diff[] 233 This can be used to override configuration settings. 234endif::git-diff[] 235 It is the same as `--color=never`. 236 237--word-diff[=<mode>]:: 238 Show a word diff, using the <mode> to delimit changed words. 239 By default, words are delimited by whitespace; see 240 `--word-diff-regex` below. The <mode> defaults to 'plain', and 241 must be one of: 242+ 243-- 244color:: 245 Highlight changed words using only colors. Implies `--color`. 246plain:: 247 Show words as `[-removed-]` and `{+added+}`. Makes no 248 attempts to escape the delimiters if they appear in the input, 249 so the output may be ambiguous. 250porcelain:: 251 Use a special line-based format intended for script 252 consumption. Added/removed/unchanged runs are printed in the 253 usual unified diff format, starting with a `+`/`-`/` ` 254 character at the beginning of the line and extending to the 255 end of the line. Newlines in the input are represented by a 256 tilde `~` on a line of its own. 257none:: 258 Disable word diff again. 259-- 260+ 261Note that despite the name of the first mode, color is used to 262highlight the changed parts in all modes if enabled. 263 264--word-diff-regex=<regex>:: 265 Use <regex> to decide what a word is, instead of considering 266 runs of non-whitespace to be a word. Also implies 267 `--word-diff` unless it was already enabled. 268+ 269Every non-overlapping match of the 270<regex> is considered a word. Anything between these matches is 271considered whitespace and ignored(!) for the purposes of finding 272differences. You may want to append `|[^[:space:]]` to your regular 273expression to make sure that it matches all non-whitespace characters. 274A match that contains a newline is silently truncated(!) at the 275newline. 276+ 277For example, `--word-diff-regex=.` will treat each character as a word 278and, correspondingly, show differences character by character. 279+ 280The regex can also be set via a diff driver or configuration option, see 281linkgit:gitattributes[5] or linkgit:git-config[1]. Giving it explicitly 282overrides any diff driver or configuration setting. Diff drivers 283override configuration settings. 284 285--color-words[=<regex>]:: 286 Equivalent to `--word-diff=color` plus (if a regex was 287 specified) `--word-diff-regex=<regex>`. 288endif::git-format-patch[] 289 290--no-renames:: 291 Turn off rename detection, even when the configuration 292 file gives the default to do so. 293 294ifndef::git-format-patch[] 295--check:: 296 Warn if changes introduce conflict markers or whitespace errors. 297 What are considered whitespace errors is controlled by `core.whitespace` 298 configuration. By default, trailing whitespaces (including 299 lines that solely consist of whitespaces) and a space character 300 that is immediately followed by a tab character inside the 301 initial indent of the line are considered whitespace errors. 302 Exits with non-zero status if problems are found. Not compatible 303 with --exit-code. 304 305--ws-error-highlight=<kind>:: 306 Highlight whitespace errors on lines specified by <kind> 307 in the color specified by `color.diff.whitespace`. <kind> 308 is a comma separated list of `old`, `new`, `context`. When 309 this option is not given, only whitespace errors in `new` 310 lines are highlighted. E.g. `--ws-error-highlight=new,old` 311 highlights whitespace errors on both deleted and added lines. 312 `all` can be used as a short-hand for `old,new,context`. 313 314endif::git-format-patch[] 315 316--full-index:: 317 Instead of the first handful of characters, show the full 318 pre- and post-image blob object names on the "index" 319 line when generating patch format output. 320 321--binary:: 322 In addition to `--full-index`, output a binary diff that 323 can be applied with `git-apply`. 324 325--abbrev[=<n>]:: 326 Instead of showing the full 40-byte hexadecimal object 327 name in diff-raw format output and diff-tree header 328 lines, show only a partial prefix. This is 329 independent of the `--full-index` option above, which controls 330 the diff-patch output format. Non default number of 331 digits can be specified with `--abbrev=<n>`. 332 333-B[<n>][/<m>]:: 334--break-rewrites[=[<n>][/<m>]]:: 335 Break complete rewrite changes into pairs of delete and 336 create. This serves two purposes: 337+ 338It affects the way a change that amounts to a total rewrite of a file 339not as a series of deletion and insertion mixed together with a very 340few lines that happen to match textually as the context, but as a 341single deletion of everything old followed by a single insertion of 342everything new, and the number `m` controls this aspect of the -B 343option (defaults to 60%). `-B/70%` specifies that less than 30% of the 344original should remain in the result for Git to consider it a total 345rewrite (i.e. otherwise the resulting patch will be a series of 346deletion and insertion mixed together with context lines). 347+ 348When used with -M, a totally-rewritten file is also considered as the 349source of a rename (usually -M only considers a file that disappeared 350as the source of a rename), and the number `n` controls this aspect of 351the -B option (defaults to 50%). `-B20%` specifies that a change with 352addition and deletion compared to 20% or more of the file's size are 353eligible for being picked up as a possible source of a rename to 354another file. 355 356-M[<n>]:: 357--find-renames[=<n>]:: 358ifndef::git-log[] 359 Detect renames. 360endif::git-log[] 361ifdef::git-log[] 362 If generating diffs, detect and report renames for each commit. 363 For following files across renames while traversing history, see 364 `--follow`. 365endif::git-log[] 366 If `n` is specified, it is a threshold on the similarity 367 index (i.e. amount of addition/deletions compared to the 368 file's size). For example, `-M90%` means Git should consider a 369 delete/add pair to be a rename if more than 90% of the file 370 hasn't changed. Without a `%` sign, the number is to be read as 371 a fraction, with a decimal point before it. I.e., `-M5` becomes 372 0.5, and is thus the same as `-M50%`. Similarly, `-M05` is 373 the same as `-M5%`. To limit detection to exact renames, use 374 `-M100%`. The default similarity index is 50%. 375 376-C[<n>]:: 377--find-copies[=<n>]:: 378 Detect copies as well as renames. See also `--find-copies-harder`. 379 If `n` is specified, it has the same meaning as for `-M<n>`. 380 381--find-copies-harder:: 382 For performance reasons, by default, `-C` option finds copies only 383 if the original file of the copy was modified in the same 384 changeset. This flag makes the command 385 inspect unmodified files as candidates for the source of 386 copy. This is a very expensive operation for large 387 projects, so use it with caution. Giving more than one 388 `-C` option has the same effect. 389 390-D:: 391--irreversible-delete:: 392 Omit the preimage for deletes, i.e. print only the header but not 393 the diff between the preimage and `/dev/null`. The resulting patch 394 is not meant to be applied with `patch` or `git apply`; this is 395 solely for people who want to just concentrate on reviewing the 396 text after the change. In addition, the output obviously lack 397 enough information to apply such a patch in reverse, even manually, 398 hence the name of the option. 399+ 400When used together with `-B`, omit also the preimage in the deletion part 401of a delete/create pair. 402 403-l<num>:: 404 The `-M` and `-C` options require O(n^2) processing time where n 405 is the number of potential rename/copy targets. This 406 option prevents rename/copy detection from running if 407 the number of rename/copy targets exceeds the specified 408 number. 409 410ifndef::git-format-patch[] 411--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: 412 Select only files that are Added (`A`), Copied (`C`), 413 Deleted (`D`), Modified (`M`), Renamed (`R`), have their 414 type (i.e. regular file, symlink, submodule, ...) changed (`T`), 415 are Unmerged (`U`), are 416 Unknown (`X`), or have had their pairing Broken (`B`). 417 Any combination of the filter characters (including none) can be used. 418 When `*` (All-or-none) is added to the combination, all 419 paths are selected if there is any file that matches 420 other criteria in the comparison; if there is no file 421 that matches other criteria, nothing is selected. 422+ 423Also, these upper-case letters can be downcased to exclude. E.g. 424`--diff-filter=ad` excludes added and deleted paths. 425 426-S<string>:: 427 Look for differences that change the number of occurrences of 428 the specified string (i.e. addition/deletion) in a file. 429 Intended for the scripter's use. 430+ 431It is useful when you're looking for an exact block of code (like a 432struct), and want to know the history of that block since it first 433came into being: use the feature iteratively to feed the interesting 434block in the preimage back into `-S`, and keep going until you get the 435very first version of the block. 436 437-G<regex>:: 438 Look for differences whose patch text contains added/removed 439 lines that match <regex>. 440+ 441To illustrate the difference between `-S<regex> --pickaxe-regex` and 442`-G<regex>`, consider a commit with the following diff in the same 443file: 444+ 445---- 446+ return !regexec(regexp, two->ptr, 1, ®match, 0); 447... 448- hit = !regexec(regexp, mf2.ptr, 1, ®match, 0); 449---- 450+ 451While `git log -G"regexec\(regexp"` will show this commit, `git log 452-S"regexec\(regexp" --pickaxe-regex` will not (because the number of 453occurrences of that string did not change). 454+ 455See the 'pickaxe' entry in linkgit:gitdiffcore[7] for more 456information. 457 458--pickaxe-all:: 459 When `-S` or `-G` finds a change, show all the changes in that 460 changeset, not just the files that contain the change 461 in <string>. 462 463--pickaxe-regex:: 464 Treat the <string> given to `-S` as an extended POSIX regular 465 expression to match. 466endif::git-format-patch[] 467 468-O<orderfile>:: 469 Output the patch in the order specified in the 470 <orderfile>, which has one shell glob pattern per line. 471 This overrides the `diff.orderFile` configuration variable 472 (see linkgit:git-config[1]). To cancel `diff.orderFile`, 473 use `-O/dev/null`. 474 475ifndef::git-format-patch[] 476-R:: 477 Swap two inputs; that is, show differences from index or 478 on-disk file to tree contents. 479 480--relative[=<path>]:: 481 When run from a subdirectory of the project, it can be 482 told to exclude changes outside the directory and show 483 pathnames relative to it with this option. When you are 484 not in a subdirectory (e.g. in a bare repository), you 485 can name which subdirectory to make the output relative 486 to by giving a <path> as an argument. 487endif::git-format-patch[] 488 489-a:: 490--text:: 491 Treat all files as text. 492 493--ignore-space-at-eol:: 494 Ignore changes in whitespace at EOL. 495 496-b:: 497--ignore-space-change:: 498 Ignore changes in amount of whitespace. This ignores whitespace 499 at line end, and considers all other sequences of one or 500 more whitespace characters to be equivalent. 501 502-w:: 503--ignore-all-space:: 504 Ignore whitespace when comparing lines. This ignores 505 differences even if one line has whitespace where the other 506 line has none. 507 508--ignore-blank-lines:: 509 Ignore changes whose lines are all blank. 510 511--inter-hunk-context=<lines>:: 512 Show the context between diff hunks, up to the specified number 513 of lines, thereby fusing hunks that are close to each other. 514 515-W:: 516--function-context:: 517 Show whole surrounding functions of changes. 518 519ifndef::git-format-patch[] 520ifndef::git-log[] 521--exit-code:: 522 Make the program exit with codes similar to diff(1). 523 That is, it exits with 1 if there were differences and 524 0 means no differences. 525 526--quiet:: 527 Disable all output of the program. Implies `--exit-code`. 528endif::git-log[] 529endif::git-format-patch[] 530 531--ext-diff:: 532 Allow an external diff helper to be executed. If you set an 533 external diff driver with linkgit:gitattributes[5], you need 534 to use this option with linkgit:git-log[1] and friends. 535 536--no-ext-diff:: 537 Disallow external diff drivers. 538 539--textconv:: 540--no-textconv:: 541 Allow (or disallow) external text conversion filters to be run 542 when comparing binary files. See linkgit:gitattributes[5] for 543 details. Because textconv filters are typically a one-way 544 conversion, the resulting diff is suitable for human 545 consumption, but cannot be applied. For this reason, textconv 546 filters are enabled by default only for linkgit:git-diff[1] and 547 linkgit:git-log[1], but not for linkgit:git-format-patch[1] or 548 diff plumbing commands. 549 550--ignore-submodules[=<when>]:: 551 Ignore changes to submodules in the diff generation. <when> can be 552 either "none", "untracked", "dirty" or "all", which is the default. 553 Using "none" will consider the submodule modified when it either contains 554 untracked or modified files or its HEAD differs from the commit recorded 555 in the superproject and can be used to override any settings of the 556 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When 557 "untracked" is used submodules are not considered dirty when they only 558 contain untracked content (but they are still scanned for modified 559 content). Using "dirty" ignores all changes to the work tree of submodules, 560 only changes to the commits stored in the superproject are shown (this was 561 the behavior until 1.7.0). Using "all" hides all changes to submodules. 562 563--src-prefix=<prefix>:: 564 Show the given source prefix instead of "a/". 565 566--dst-prefix=<prefix>:: 567 Show the given destination prefix instead of "b/". 568 569--no-prefix:: 570 Do not show any source or destination prefix. 571 572--line-prefix=<prefix>:: 573 Prepend an additional prefix to every line of output. 574 575For more detailed explanation on these common options, see also 576linkgit:gitdiffcore[7].