1// Please don't remove this comment as asciidoc behaves badly when 2// the first non-empty line is ifdef/ifndef. The symptom is that 3// without this comment the <git-diff-core> attribute conditionally 4// defined below ends up being defined unconditionally. 5// Last checked with asciidoc 7.0.2. 6 7ifndef::git-format-patch[] 8ifndef::git-diff[] 9ifndef::git-log[] 10:git-diff-core: 1 11endif::git-log[] 12endif::git-diff[] 13endif::git-format-patch[] 14 15ifdef::git-format-patch[] 16-p:: 17--no-stat:: 18 Generate plain patches without any diffstats. 19endif::git-format-patch[] 20 21ifndef::git-format-patch[] 22-p:: 23-u:: 24--patch:: 25 Generate patch (see section on generating patches). 26ifdef::git-diff[] 27 This is the default. 28endif::git-diff[] 29 30-s:: 31--no-patch:: 32 Suppress diff output. Useful for commands like `git show` that 33 show the patch by default, or to cancel the effect of `--patch`. 34endif::git-format-patch[] 35 36-U<n>:: 37--unified=<n>:: 38 Generate diffs with <n> lines of context instead of 39 the usual three. 40ifndef::git-format-patch[] 41 Implies `-p`. 42endif::git-format-patch[] 43 44ifndef::git-format-patch[] 45--raw:: 46ifndef::git-log[] 47 Generate the diff in raw format. 48ifdef::git-diff-core[] 49 This is the default. 50endif::git-diff-core[] 51endif::git-log[] 52ifdef::git-log[] 53 For each commit, show a summary of changes using the raw diff 54 format. See the "RAW OUTPUT FORMAT" section of 55 linkgit:git-diff[1]. This is different from showing the log 56 itself in raw format, which you can achieve with 57 `--format=raw`. 58endif::git-log[] 59endif::git-format-patch[] 60 61ifndef::git-format-patch[] 62--patch-with-raw:: 63 Synonym for `-p --raw`. 64endif::git-format-patch[] 65 66--indent-heuristic:: 67 Enable the heuristic that shift diff hunk boundaries to make patches 68 easier to read. This is the default. 69 70--no-indent-heuristic:: 71 Disable the indent heuristic. 72 73--minimal:: 74 Spend extra time to make sure the smallest possible 75 diff is produced. 76 77--patience:: 78 Generate a diff using the "patience diff" algorithm. 79 80--histogram:: 81 Generate a diff using the "histogram diff" algorithm. 82 83--anchored=<text>:: 84 Generate a diff using the "anchored diff" algorithm. 85+ 86This option may be specified more than once. 87+ 88If a line exists in both the source and destination, exists only once, 89and starts with this text, this algorithm attempts to prevent it from 90appearing as a deletion or addition in the output. It uses the "patience 91diff" algorithm internally. 92 93--diff-algorithm={patience|minimal|histogram|myers}:: 94 Choose a diff algorithm. The variants are as follows: 95+ 96-- 97`default`, `myers`;; 98 The basic greedy diff algorithm. Currently, this is the default. 99`minimal`;; 100 Spend extra time to make sure the smallest possible diff is 101 produced. 102`patience`;; 103 Use "patience diff" algorithm when generating patches. 104`histogram`;; 105 This algorithm extends the patience algorithm to "support 106 low-occurrence common elements". 107-- 108+ 109For instance, if you configured diff.algorithm variable to a 110non-default value and want to use the default one, then you 111have to use `--diff-algorithm=default` option. 112 113--stat[=<width>[,<name-width>[,<count>]]]:: 114 Generate a diffstat. By default, as much space as necessary 115 will be used for the filename part, and the rest for the graph 116 part. Maximum width defaults to terminal width, or 80 columns 117 if not connected to a terminal, and can be overridden by 118 `<width>`. The width of the filename part can be limited by 119 giving another width `<name-width>` after a comma. The width 120 of the graph part can be limited by using 121 `--stat-graph-width=<width>` (affects all commands generating 122 a stat graph) or by setting `diff.statGraphWidth=<width>` 123 (does not affect `git format-patch`). 124 By giving a third parameter `<count>`, you can limit the 125 output to the first `<count>` lines, followed by `...` if 126 there are more. 127+ 128These parameters can also be set individually with `--stat-width=<width>`, 129`--stat-name-width=<name-width>` and `--stat-count=<count>`. 130 131--numstat:: 132 Similar to `--stat`, but shows number of added and 133 deleted lines in decimal notation and pathname without 134 abbreviation, to make it more machine friendly. For 135 binary files, outputs two `-` instead of saying 136 `0 0`. 137 138--shortstat:: 139 Output only the last line of the `--stat` format containing total 140 number of modified files, as well as number of added and deleted 141 lines. 142 143--dirstat[=<param1,param2,...>]:: 144 Output the distribution of relative amount of changes for each 145 sub-directory. The behavior of `--dirstat` can be customized by 146 passing it a comma separated list of parameters. 147 The defaults are controlled by the `diff.dirstat` configuration 148 variable (see linkgit:git-config[1]). 149 The following parameters are available: 150+ 151-- 152`changes`;; 153 Compute the dirstat numbers by counting the lines that have been 154 removed from the source, or added to the destination. This ignores 155 the amount of pure code movements within a file. In other words, 156 rearranging lines in a file is not counted as much as other changes. 157 This is the default behavior when no parameter is given. 158`lines`;; 159 Compute the dirstat numbers by doing the regular line-based diff 160 analysis, and summing the removed/added line counts. (For binary 161 files, count 64-byte chunks instead, since binary files have no 162 natural concept of lines). This is a more expensive `--dirstat` 163 behavior than the `changes` behavior, but it does count rearranged 164 lines within a file as much as other changes. The resulting output 165 is consistent with what you get from the other `--*stat` options. 166`files`;; 167 Compute the dirstat numbers by counting the number of files changed. 168 Each changed file counts equally in the dirstat analysis. This is 169 the computationally cheapest `--dirstat` behavior, since it does 170 not have to look at the file contents at all. 171`cumulative`;; 172 Count changes in a child directory for the parent directory as well. 173 Note that when using `cumulative`, the sum of the percentages 174 reported may exceed 100%. The default (non-cumulative) behavior can 175 be specified with the `noncumulative` parameter. 176<limit>;; 177 An integer parameter specifies a cut-off percent (3% by default). 178 Directories contributing less than this percentage of the changes 179 are not shown in the output. 180-- 181+ 182Example: The following will count changed files, while ignoring 183directories with less than 10% of the total amount of changed files, 184and accumulating child directory counts in the parent directories: 185`--dirstat=files,10,cumulative`. 186 187--summary:: 188 Output a condensed summary of extended header information 189 such as creations, renames and mode changes. 190 191ifndef::git-format-patch[] 192--patch-with-stat:: 193 Synonym for `-p --stat`. 194endif::git-format-patch[] 195 196ifndef::git-format-patch[] 197 198-z:: 199ifdef::git-log[] 200 Separate the commits with NULs instead of with new newlines. 201+ 202Also, when `--raw` or `--numstat` has been given, do not munge 203pathnames and use NULs as output field terminators. 204endif::git-log[] 205ifndef::git-log[] 206 When `--raw`, `--numstat`, `--name-only` or `--name-status` has been 207 given, do not munge pathnames and use NULs as output field terminators. 208endif::git-log[] 209+ 210Without this option, pathnames with "unusual" characters are quoted as 211explained for the configuration variable `core.quotePath` (see 212linkgit:git-config[1]). 213 214--name-only:: 215 Show only names of changed files. 216 217--name-status:: 218 Show only names and status of changed files. See the description 219 of the `--diff-filter` option on what the status letters mean. 220 221--submodule[=<format>]:: 222 Specify how differences in submodules are shown. When specifying 223 `--submodule=short` the 'short' format is used. This format just 224 shows the names of the commits at the beginning and end of the range. 225 When `--submodule` or `--submodule=log` is specified, the 'log' 226 format is used. This format lists the commits in the range like 227 linkgit:git-submodule[1] `summary` does. When `--submodule=diff` 228 is specified, the 'diff' format is used. This format shows an 229 inline diff of the changes in the submodule contents between the 230 commit range. Defaults to `diff.submodule` or the 'short' format 231 if the config option is unset. 232 233--color[=<when>]:: 234 Show colored diff. 235 `--color` (i.e. without '=<when>') is the same as `--color=always`. 236 '<when>' can be one of `always`, `never`, or `auto`. 237ifdef::git-diff[] 238 It can be changed by the `color.ui` and `color.diff` 239 configuration settings. 240endif::git-diff[] 241 242--no-color:: 243 Turn off colored diff. 244ifdef::git-diff[] 245 This can be used to override configuration settings. 246endif::git-diff[] 247 It is the same as `--color=never`. 248 249--color-moved[=<mode>]:: 250 Moved lines of code are colored differently. 251ifdef::git-diff[] 252 It can be changed by the `diff.colorMoved` configuration setting. 253endif::git-diff[] 254 The <mode> defaults to 'no' if the option is not given 255 and to 'zebra' if the option with no mode is given. 256 The mode must be one of: 257+ 258-- 259no:: 260 Moved lines are not highlighted. 261default:: 262 Is a synonym for `zebra`. This may change to a more sensible mode 263 in the future. 264plain:: 265 Any line that is added in one location and was removed 266 in another location will be colored with 'color.diff.newMoved'. 267 Similarly 'color.diff.oldMoved' will be used for removed lines 268 that are added somewhere else in the diff. This mode picks up any 269 moved line, but it is not very useful in a review to determine 270 if a block of code was moved without permutation. 271zebra:: 272 Blocks of moved text of at least 20 alphanumeric characters 273 are detected greedily. The detected blocks are 274 painted using either the 'color.diff.{old,new}Moved' color or 275 'color.diff.{old,new}MovedAlternative'. The change between 276 the two colors indicates that a new block was detected. 277dimmed_zebra:: 278 Similar to 'zebra', but additional dimming of uninteresting parts 279 of moved code is performed. The bordering lines of two adjacent 280 blocks are considered interesting, the rest is uninteresting. 281-- 282 283--word-diff[=<mode>]:: 284 Show a word diff, using the <mode> to delimit changed words. 285 By default, words are delimited by whitespace; see 286 `--word-diff-regex` below. The <mode> defaults to 'plain', and 287 must be one of: 288+ 289-- 290color:: 291 Highlight changed words using only colors. Implies `--color`. 292plain:: 293 Show words as `[-removed-]` and `{+added+}`. Makes no 294 attempts to escape the delimiters if they appear in the input, 295 so the output may be ambiguous. 296porcelain:: 297 Use a special line-based format intended for script 298 consumption. Added/removed/unchanged runs are printed in the 299 usual unified diff format, starting with a `+`/`-`/` ` 300 character at the beginning of the line and extending to the 301 end of the line. Newlines in the input are represented by a 302 tilde `~` on a line of its own. 303none:: 304 Disable word diff again. 305-- 306+ 307Note that despite the name of the first mode, color is used to 308highlight the changed parts in all modes if enabled. 309 310--word-diff-regex=<regex>:: 311 Use <regex> to decide what a word is, instead of considering 312 runs of non-whitespace to be a word. Also implies 313 `--word-diff` unless it was already enabled. 314+ 315Every non-overlapping match of the 316<regex> is considered a word. Anything between these matches is 317considered whitespace and ignored(!) for the purposes of finding 318differences. You may want to append `|[^[:space:]]` to your regular 319expression to make sure that it matches all non-whitespace characters. 320A match that contains a newline is silently truncated(!) at the 321newline. 322+ 323For example, `--word-diff-regex=.` will treat each character as a word 324and, correspondingly, show differences character by character. 325+ 326The regex can also be set via a diff driver or configuration option, see 327linkgit:gitattributes[5] or linkgit:git-config[1]. Giving it explicitly 328overrides any diff driver or configuration setting. Diff drivers 329override configuration settings. 330 331--color-words[=<regex>]:: 332 Equivalent to `--word-diff=color` plus (if a regex was 333 specified) `--word-diff-regex=<regex>`. 334endif::git-format-patch[] 335 336--no-renames:: 337 Turn off rename detection, even when the configuration 338 file gives the default to do so. 339 340ifndef::git-format-patch[] 341--check:: 342 Warn if changes introduce conflict markers or whitespace errors. 343 What are considered whitespace errors is controlled by `core.whitespace` 344 configuration. By default, trailing whitespaces (including 345 lines that solely consist of whitespaces) and a space character 346 that is immediately followed by a tab character inside the 347 initial indent of the line are considered whitespace errors. 348 Exits with non-zero status if problems are found. Not compatible 349 with --exit-code. 350 351--ws-error-highlight=<kind>:: 352 Highlight whitespace errors in the `context`, `old` or `new` 353 lines of the diff. Multiple values are separated by comma, 354 `none` resets previous values, `default` reset the list to 355 `new` and `all` is a shorthand for `old,new,context`. When 356 this option is not given, and the configuration variable 357 `diff.wsErrorHighlight` is not set, only whitespace errors in 358 `new` lines are highlighted. The whitespace errors are colored 359 whith `color.diff.whitespace`. 360 361endif::git-format-patch[] 362 363--full-index:: 364 Instead of the first handful of characters, show the full 365 pre- and post-image blob object names on the "index" 366 line when generating patch format output. 367 368--binary:: 369 In addition to `--full-index`, output a binary diff that 370 can be applied with `git-apply`. 371 372--abbrev[=<n>]:: 373 Instead of showing the full 40-byte hexadecimal object 374 name in diff-raw format output and diff-tree header 375 lines, show only a partial prefix. This is 376 independent of the `--full-index` option above, which controls 377 the diff-patch output format. Non default number of 378 digits can be specified with `--abbrev=<n>`. 379 380-B[<n>][/<m>]:: 381--break-rewrites[=[<n>][/<m>]]:: 382 Break complete rewrite changes into pairs of delete and 383 create. This serves two purposes: 384+ 385It affects the way a change that amounts to a total rewrite of a file 386not as a series of deletion and insertion mixed together with a very 387few lines that happen to match textually as the context, but as a 388single deletion of everything old followed by a single insertion of 389everything new, and the number `m` controls this aspect of the -B 390option (defaults to 60%). `-B/70%` specifies that less than 30% of the 391original should remain in the result for Git to consider it a total 392rewrite (i.e. otherwise the resulting patch will be a series of 393deletion and insertion mixed together with context lines). 394+ 395When used with -M, a totally-rewritten file is also considered as the 396source of a rename (usually -M only considers a file that disappeared 397as the source of a rename), and the number `n` controls this aspect of 398the -B option (defaults to 50%). `-B20%` specifies that a change with 399addition and deletion compared to 20% or more of the file's size are 400eligible for being picked up as a possible source of a rename to 401another file. 402 403-M[<n>]:: 404--find-renames[=<n>]:: 405ifndef::git-log[] 406 Detect renames. 407endif::git-log[] 408ifdef::git-log[] 409 If generating diffs, detect and report renames for each commit. 410 For following files across renames while traversing history, see 411 `--follow`. 412endif::git-log[] 413 If `n` is specified, it is a threshold on the similarity 414 index (i.e. amount of addition/deletions compared to the 415 file's size). For example, `-M90%` means Git should consider a 416 delete/add pair to be a rename if more than 90% of the file 417 hasn't changed. Without a `%` sign, the number is to be read as 418 a fraction, with a decimal point before it. I.e., `-M5` becomes 419 0.5, and is thus the same as `-M50%`. Similarly, `-M05` is 420 the same as `-M5%`. To limit detection to exact renames, use 421 `-M100%`. The default similarity index is 50%. 422 423-C[<n>]:: 424--find-copies[=<n>]:: 425 Detect copies as well as renames. See also `--find-copies-harder`. 426 If `n` is specified, it has the same meaning as for `-M<n>`. 427 428--find-copies-harder:: 429 For performance reasons, by default, `-C` option finds copies only 430 if the original file of the copy was modified in the same 431 changeset. This flag makes the command 432 inspect unmodified files as candidates for the source of 433 copy. This is a very expensive operation for large 434 projects, so use it with caution. Giving more than one 435 `-C` option has the same effect. 436 437-D:: 438--irreversible-delete:: 439 Omit the preimage for deletes, i.e. print only the header but not 440 the diff between the preimage and `/dev/null`. The resulting patch 441 is not meant to be applied with `patch` or `git apply`; this is 442 solely for people who want to just concentrate on reviewing the 443 text after the change. In addition, the output obviously lacks 444 enough information to apply such a patch in reverse, even manually, 445 hence the name of the option. 446+ 447When used together with `-B`, omit also the preimage in the deletion part 448of a delete/create pair. 449 450-l<num>:: 451 The `-M` and `-C` options require O(n^2) processing time where n 452 is the number of potential rename/copy targets. This 453 option prevents rename/copy detection from running if 454 the number of rename/copy targets exceeds the specified 455 number. 456 457ifndef::git-format-patch[] 458--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: 459 Select only files that are Added (`A`), Copied (`C`), 460 Deleted (`D`), Modified (`M`), Renamed (`R`), have their 461 type (i.e. regular file, symlink, submodule, ...) changed (`T`), 462 are Unmerged (`U`), are 463 Unknown (`X`), or have had their pairing Broken (`B`). 464 Any combination of the filter characters (including none) can be used. 465 When `*` (All-or-none) is added to the combination, all 466 paths are selected if there is any file that matches 467 other criteria in the comparison; if there is no file 468 that matches other criteria, nothing is selected. 469+ 470Also, these upper-case letters can be downcased to exclude. E.g. 471`--diff-filter=ad` excludes added and deleted paths. 472+ 473Note that not all diffs can feature all types. For instance, diffs 474from the index to the working tree can never have Added entries 475(because the set of paths included in the diff is limited by what is in 476the index). Similarly, copied and renamed entries cannot appear if 477detection for those types is disabled. 478 479-S<string>:: 480 Look for differences that change the number of occurrences of 481 the specified string (i.e. addition/deletion) in a file. 482 Intended for the scripter's use. 483+ 484It is useful when you're looking for an exact block of code (like a 485struct), and want to know the history of that block since it first 486came into being: use the feature iteratively to feed the interesting 487block in the preimage back into `-S`, and keep going until you get the 488very first version of the block. 489 490-G<regex>:: 491 Look for differences whose patch text contains added/removed 492 lines that match <regex>. 493+ 494To illustrate the difference between `-S<regex> --pickaxe-regex` and 495`-G<regex>`, consider a commit with the following diff in the same 496file: 497+ 498---- 499+ return !regexec(regexp, two->ptr, 1, ®match, 0); 500... 501- hit = !regexec(regexp, mf2.ptr, 1, ®match, 0); 502---- 503+ 504While `git log -G"regexec\(regexp"` will show this commit, `git log 505-S"regexec\(regexp" --pickaxe-regex` will not (because the number of 506occurrences of that string did not change). 507+ 508See the 'pickaxe' entry in linkgit:gitdiffcore[7] for more 509information. 510 511--pickaxe-all:: 512 When `-S` or `-G` finds a change, show all the changes in that 513 changeset, not just the files that contain the change 514 in <string>. 515 516--pickaxe-regex:: 517 Treat the <string> given to `-S` as an extended POSIX regular 518 expression to match. 519endif::git-format-patch[] 520 521-O<orderfile>:: 522 Control the order in which files appear in the output. 523 This overrides the `diff.orderFile` configuration variable 524 (see linkgit:git-config[1]). To cancel `diff.orderFile`, 525 use `-O/dev/null`. 526+ 527The output order is determined by the order of glob patterns in 528<orderfile>. 529All files with pathnames that match the first pattern are output 530first, all files with pathnames that match the second pattern (but not 531the first) are output next, and so on. 532All files with pathnames that do not match any pattern are output 533last, as if there was an implicit match-all pattern at the end of the 534file. 535If multiple pathnames have the same rank (they match the same pattern 536but no earlier patterns), their output order relative to each other is 537the normal order. 538+ 539<orderfile> is parsed as follows: 540+ 541-- 542 - Blank lines are ignored, so they can be used as separators for 543 readability. 544 545 - Lines starting with a hash ("`#`") are ignored, so they can be used 546 for comments. Add a backslash ("`\`") to the beginning of the 547 pattern if it starts with a hash. 548 549 - Each other line contains a single pattern. 550-- 551+ 552Patterns have the same syntax and semantics as patterns used for 553fnmantch(3) without the FNM_PATHNAME flag, except a pathname also 554matches a pattern if removing any number of the final pathname 555components matches the pattern. For example, the pattern "`foo*bar`" 556matches "`fooasdfbar`" and "`foo/bar/baz/asdf`" but not "`foobarx`". 557 558ifndef::git-format-patch[] 559-R:: 560 Swap two inputs; that is, show differences from index or 561 on-disk file to tree contents. 562 563--relative[=<path>]:: 564 When run from a subdirectory of the project, it can be 565 told to exclude changes outside the directory and show 566 pathnames relative to it with this option. When you are 567 not in a subdirectory (e.g. in a bare repository), you 568 can name which subdirectory to make the output relative 569 to by giving a <path> as an argument. 570endif::git-format-patch[] 571 572-a:: 573--text:: 574 Treat all files as text. 575 576--ignore-cr-at-eol:: 577 Ignore carrige-return at the end of line when doing a comparison. 578 579--ignore-space-at-eol:: 580 Ignore changes in whitespace at EOL. 581 582-b:: 583--ignore-space-change:: 584 Ignore changes in amount of whitespace. This ignores whitespace 585 at line end, and considers all other sequences of one or 586 more whitespace characters to be equivalent. 587 588-w:: 589--ignore-all-space:: 590 Ignore whitespace when comparing lines. This ignores 591 differences even if one line has whitespace where the other 592 line has none. 593 594--ignore-blank-lines:: 595 Ignore changes whose lines are all blank. 596 597--inter-hunk-context=<lines>:: 598 Show the context between diff hunks, up to the specified number 599 of lines, thereby fusing hunks that are close to each other. 600 Defaults to `diff.interHunkContext` or 0 if the config option 601 is unset. 602 603-W:: 604--function-context:: 605 Show whole surrounding functions of changes. 606 607ifndef::git-format-patch[] 608ifndef::git-log[] 609--exit-code:: 610 Make the program exit with codes similar to diff(1). 611 That is, it exits with 1 if there were differences and 612 0 means no differences. 613 614--quiet:: 615 Disable all output of the program. Implies `--exit-code`. 616endif::git-log[] 617endif::git-format-patch[] 618 619--ext-diff:: 620 Allow an external diff helper to be executed. If you set an 621 external diff driver with linkgit:gitattributes[5], you need 622 to use this option with linkgit:git-log[1] and friends. 623 624--no-ext-diff:: 625 Disallow external diff drivers. 626 627--textconv:: 628--no-textconv:: 629 Allow (or disallow) external text conversion filters to be run 630 when comparing binary files. See linkgit:gitattributes[5] for 631 details. Because textconv filters are typically a one-way 632 conversion, the resulting diff is suitable for human 633 consumption, but cannot be applied. For this reason, textconv 634 filters are enabled by default only for linkgit:git-diff[1] and 635 linkgit:git-log[1], but not for linkgit:git-format-patch[1] or 636 diff plumbing commands. 637 638--ignore-submodules[=<when>]:: 639 Ignore changes to submodules in the diff generation. <when> can be 640 either "none", "untracked", "dirty" or "all", which is the default. 641 Using "none" will consider the submodule modified when it either contains 642 untracked or modified files or its HEAD differs from the commit recorded 643 in the superproject and can be used to override any settings of the 644 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When 645 "untracked" is used submodules are not considered dirty when they only 646 contain untracked content (but they are still scanned for modified 647 content). Using "dirty" ignores all changes to the work tree of submodules, 648 only changes to the commits stored in the superproject are shown (this was 649 the behavior until 1.7.0). Using "all" hides all changes to submodules. 650 651--src-prefix=<prefix>:: 652 Show the given source prefix instead of "a/". 653 654--dst-prefix=<prefix>:: 655 Show the given destination prefix instead of "b/". 656 657--no-prefix:: 658 Do not show any source or destination prefix. 659 660--line-prefix=<prefix>:: 661 Prepend an additional prefix to every line of output. 662 663--ita-invisible-in-index:: 664 By default entries added by "git add -N" appear as an existing 665 empty file in "git diff" and a new file in "git diff --cached". 666 This option makes the entry appear as a new file in "git diff" 667 and non-existent in "git diff --cached". This option could be 668 reverted with `--ita-visible-in-index`. Both options are 669 experimental and could be removed in future. 670 671For more detailed explanation on these common options, see also 672linkgit:gitdiffcore[7].