1// Please don't remove this comment as asciidoc behaves badly when 2// the first non-empty line is ifdef/ifndef. The symptom is that 3// without this comment the <git-diff-core> attribute conditionally 4// defined below ends up being defined unconditionally. 5// Last checked with asciidoc 7.0.2. 6 7ifndef::git-format-patch[] 8ifndef::git-diff[] 9ifndef::git-log[] 10:git-diff-core: 1 11endif::git-log[] 12endif::git-diff[] 13endif::git-format-patch[] 14 15ifdef::git-format-patch[] 16-p:: 17--no-stat:: 18 Generate plain patches without any diffstats. 19endif::git-format-patch[] 20 21ifndef::git-format-patch[] 22-p:: 23-u:: 24--patch:: 25 Generate patch (see section on generating patches). 26ifdef::git-diff[] 27 This is the default. 28endif::git-diff[] 29 30-s:: 31--no-patch:: 32 Suppress diff output. Useful for commands like `git show` that 33 show the patch by default, or to cancel the effect of `--patch`. 34endif::git-format-patch[] 35 36-U<n>:: 37--unified=<n>:: 38 Generate diffs with <n> lines of context instead of 39 the usual three. 40ifndef::git-format-patch[] 41 Implies `-p`. 42endif::git-format-patch[] 43 44ifndef::git-format-patch[] 45--raw:: 46ifndef::git-log[] 47 Generate the diff in raw format. 48ifdef::git-diff-core[] 49 This is the default. 50endif::git-diff-core[] 51endif::git-log[] 52ifdef::git-log[] 53 For each commit, show a summary of changes using the raw diff 54 format. See the "RAW OUTPUT FORMAT" section of 55 linkgit:git-diff[1]. This is different from showing the log 56 itself in raw format, which you can achieve with 57 `--format=raw`. 58endif::git-log[] 59endif::git-format-patch[] 60 61ifndef::git-format-patch[] 62--patch-with-raw:: 63 Synonym for `-p --raw`. 64endif::git-format-patch[] 65 66--indent-heuristic:: 67 Enable the heuristic that shifts diff hunk boundaries to make patches 68 easier to read. This is the default. 69 70--no-indent-heuristic:: 71 Disable the indent heuristic. 72 73--minimal:: 74 Spend extra time to make sure the smallest possible 75 diff is produced. 76 77--patience:: 78 Generate a diff using the "patience diff" algorithm. 79 80--histogram:: 81 Generate a diff using the "histogram diff" algorithm. 82 83--anchored=<text>:: 84 Generate a diff using the "anchored diff" algorithm. 85+ 86This option may be specified more than once. 87+ 88If a line exists in both the source and destination, exists only once, 89and starts with this text, this algorithm attempts to prevent it from 90appearing as a deletion or addition in the output. It uses the "patience 91diff" algorithm internally. 92 93--diff-algorithm={patience|minimal|histogram|myers}:: 94 Choose a diff algorithm. The variants are as follows: 95+ 96-- 97`default`, `myers`;; 98 The basic greedy diff algorithm. Currently, this is the default. 99`minimal`;; 100 Spend extra time to make sure the smallest possible diff is 101 produced. 102`patience`;; 103 Use "patience diff" algorithm when generating patches. 104`histogram`;; 105 This algorithm extends the patience algorithm to "support 106 low-occurrence common elements". 107-- 108+ 109For instance, if you configured the `diff.algorithm` variable to a 110non-default value and want to use the default one, then you 111have to use `--diff-algorithm=default` option. 112 113--stat[=<width>[,<name-width>[,<count>]]]:: 114 Generate a diffstat. By default, as much space as necessary 115 will be used for the filename part, and the rest for the graph 116 part. Maximum width defaults to terminal width, or 80 columns 117 if not connected to a terminal, and can be overridden by 118 `<width>`. The width of the filename part can be limited by 119 giving another width `<name-width>` after a comma. The width 120 of the graph part can be limited by using 121 `--stat-graph-width=<width>` (affects all commands generating 122 a stat graph) or by setting `diff.statGraphWidth=<width>` 123 (does not affect `git format-patch`). 124 By giving a third parameter `<count>`, you can limit the 125 output to the first `<count>` lines, followed by `...` if 126 there are more. 127+ 128These parameters can also be set individually with `--stat-width=<width>`, 129`--stat-name-width=<name-width>` and `--stat-count=<count>`. 130 131--compact-summary:: 132 Output a condensed summary of extended header information such 133 as file creations or deletions ("new" or "gone", optionally "+l" 134 if it's a symlink) and mode changes ("+x" or "-x" for adding 135 or removing executable bit respectively) in diffstat. The 136 information is put between the filename part and the graph 137 part. Implies `--stat`. 138 139--numstat:: 140 Similar to `--stat`, but shows number of added and 141 deleted lines in decimal notation and pathname without 142 abbreviation, to make it more machine friendly. For 143 binary files, outputs two `-` instead of saying 144 `0 0`. 145 146--shortstat:: 147 Output only the last line of the `--stat` format containing total 148 number of modified files, as well as number of added and deleted 149 lines. 150 151--dirstat[=<param1,param2,...>]:: 152 Output the distribution of relative amount of changes for each 153 sub-directory. The behavior of `--dirstat` can be customized by 154 passing it a comma separated list of parameters. 155 The defaults are controlled by the `diff.dirstat` configuration 156 variable (see linkgit:git-config[1]). 157 The following parameters are available: 158+ 159-- 160`changes`;; 161 Compute the dirstat numbers by counting the lines that have been 162 removed from the source, or added to the destination. This ignores 163 the amount of pure code movements within a file. In other words, 164 rearranging lines in a file is not counted as much as other changes. 165 This is the default behavior when no parameter is given. 166`lines`;; 167 Compute the dirstat numbers by doing the regular line-based diff 168 analysis, and summing the removed/added line counts. (For binary 169 files, count 64-byte chunks instead, since binary files have no 170 natural concept of lines). This is a more expensive `--dirstat` 171 behavior than the `changes` behavior, but it does count rearranged 172 lines within a file as much as other changes. The resulting output 173 is consistent with what you get from the other `--*stat` options. 174`files`;; 175 Compute the dirstat numbers by counting the number of files changed. 176 Each changed file counts equally in the dirstat analysis. This is 177 the computationally cheapest `--dirstat` behavior, since it does 178 not have to look at the file contents at all. 179`cumulative`;; 180 Count changes in a child directory for the parent directory as well. 181 Note that when using `cumulative`, the sum of the percentages 182 reported may exceed 100%. The default (non-cumulative) behavior can 183 be specified with the `noncumulative` parameter. 184<limit>;; 185 An integer parameter specifies a cut-off percent (3% by default). 186 Directories contributing less than this percentage of the changes 187 are not shown in the output. 188-- 189+ 190Example: The following will count changed files, while ignoring 191directories with less than 10% of the total amount of changed files, 192and accumulating child directory counts in the parent directories: 193`--dirstat=files,10,cumulative`. 194 195--summary:: 196 Output a condensed summary of extended header information 197 such as creations, renames and mode changes. 198 199ifndef::git-format-patch[] 200--patch-with-stat:: 201 Synonym for `-p --stat`. 202endif::git-format-patch[] 203 204ifndef::git-format-patch[] 205 206-z:: 207ifdef::git-log[] 208 Separate the commits with NULs instead of with new newlines. 209+ 210Also, when `--raw` or `--numstat` has been given, do not munge 211pathnames and use NULs as output field terminators. 212endif::git-log[] 213ifndef::git-log[] 214 When `--raw`, `--numstat`, `--name-only` or `--name-status` has been 215 given, do not munge pathnames and use NULs as output field terminators. 216endif::git-log[] 217+ 218Without this option, pathnames with "unusual" characters are quoted as 219explained for the configuration variable `core.quotePath` (see 220linkgit:git-config[1]). 221 222--name-only:: 223 Show only names of changed files. 224 225--name-status:: 226 Show only names and status of changed files. See the description 227 of the `--diff-filter` option on what the status letters mean. 228 229--submodule[=<format>]:: 230 Specify how differences in submodules are shown. When specifying 231 `--submodule=short` the 'short' format is used. This format just 232 shows the names of the commits at the beginning and end of the range. 233 When `--submodule` or `--submodule=log` is specified, the 'log' 234 format is used. This format lists the commits in the range like 235 linkgit:git-submodule[1] `summary` does. When `--submodule=diff` 236 is specified, the 'diff' format is used. This format shows an 237 inline diff of the changes in the submodule contents between the 238 commit range. Defaults to `diff.submodule` or the 'short' format 239 if the config option is unset. 240 241--color[=<when>]:: 242 Show colored diff. 243 `--color` (i.e. without '=<when>') is the same as `--color=always`. 244 '<when>' can be one of `always`, `never`, or `auto`. 245ifdef::git-diff[] 246 It can be changed by the `color.ui` and `color.diff` 247 configuration settings. 248endif::git-diff[] 249 250--no-color:: 251 Turn off colored diff. 252ifdef::git-diff[] 253 This can be used to override configuration settings. 254endif::git-diff[] 255 It is the same as `--color=never`. 256 257--color-moved[=<mode>]:: 258 Moved lines of code are colored differently. 259ifdef::git-diff[] 260 It can be changed by the `diff.colorMoved` configuration setting. 261endif::git-diff[] 262 The <mode> defaults to 'no' if the option is not given 263 and to 'zebra' if the option with no mode is given. 264 The mode must be one of: 265+ 266-- 267no:: 268 Moved lines are not highlighted. 269default:: 270 Is a synonym for `zebra`. This may change to a more sensible mode 271 in the future. 272plain:: 273 Any line that is added in one location and was removed 274 in another location will be colored with 'color.diff.newMoved'. 275 Similarly 'color.diff.oldMoved' will be used for removed lines 276 that are added somewhere else in the diff. This mode picks up any 277 moved line, but it is not very useful in a review to determine 278 if a block of code was moved without permutation. 279blocks:: 280 Blocks of moved text of at least 20 alphanumeric characters 281 are detected greedily. The detected blocks are 282 painted using either the 'color.diff.{old,new}Moved' color. 283 Adjacent blocks cannot be told apart. 284zebra:: 285 Blocks of moved text are detected as in 'blocks' mode. The blocks 286 are painted using either the 'color.diff.{old,new}Moved' color or 287 'color.diff.{old,new}MovedAlternative'. The change between 288 the two colors indicates that a new block was detected. 289dimmed-zebra:: 290 Similar to 'zebra', but additional dimming of uninteresting parts 291 of moved code is performed. The bordering lines of two adjacent 292 blocks are considered interesting, the rest is uninteresting. 293 `dimmed_zebra` is a deprecated synonym. 294-- 295 296--color-moved-ws=<modes>:: 297 This configures how white spaces are ignored when performing the 298 move detection for `--color-moved`. 299ifdef::git-diff[] 300 It can be set by the `diff.colorMovedWS` configuration setting. 301endif::git-diff[] 302 These modes can be given as a comma separated list: 303+ 304-- 305ignore-space-at-eol:: 306 Ignore changes in whitespace at EOL. 307ignore-space-change:: 308 Ignore changes in amount of whitespace. This ignores whitespace 309 at line end, and considers all other sequences of one or 310 more whitespace characters to be equivalent. 311ignore-all-space:: 312 Ignore whitespace when comparing lines. This ignores differences 313 even if one line has whitespace where the other line has none. 314allow-indentation-change:: 315 Initially ignore any white spaces in the move detection, then 316 group the moved code blocks only into a block if the change in 317 whitespace is the same per line. This is incompatible with the 318 other modes. 319-- 320 321--word-diff[=<mode>]:: 322 Show a word diff, using the <mode> to delimit changed words. 323 By default, words are delimited by whitespace; see 324 `--word-diff-regex` below. The <mode> defaults to 'plain', and 325 must be one of: 326+ 327-- 328color:: 329 Highlight changed words using only colors. Implies `--color`. 330plain:: 331 Show words as `[-removed-]` and `{+added+}`. Makes no 332 attempts to escape the delimiters if they appear in the input, 333 so the output may be ambiguous. 334porcelain:: 335 Use a special line-based format intended for script 336 consumption. Added/removed/unchanged runs are printed in the 337 usual unified diff format, starting with a `+`/`-`/` ` 338 character at the beginning of the line and extending to the 339 end of the line. Newlines in the input are represented by a 340 tilde `~` on a line of its own. 341none:: 342 Disable word diff again. 343-- 344+ 345Note that despite the name of the first mode, color is used to 346highlight the changed parts in all modes if enabled. 347 348--word-diff-regex=<regex>:: 349 Use <regex> to decide what a word is, instead of considering 350 runs of non-whitespace to be a word. Also implies 351 `--word-diff` unless it was already enabled. 352+ 353Every non-overlapping match of the 354<regex> is considered a word. Anything between these matches is 355considered whitespace and ignored(!) for the purposes of finding 356differences. You may want to append `|[^[:space:]]` to your regular 357expression to make sure that it matches all non-whitespace characters. 358A match that contains a newline is silently truncated(!) at the 359newline. 360+ 361For example, `--word-diff-regex=.` will treat each character as a word 362and, correspondingly, show differences character by character. 363+ 364The regex can also be set via a diff driver or configuration option, see 365linkgit:gitattributes[5] or linkgit:git-config[1]. Giving it explicitly 366overrides any diff driver or configuration setting. Diff drivers 367override configuration settings. 368 369--color-words[=<regex>]:: 370 Equivalent to `--word-diff=color` plus (if a regex was 371 specified) `--word-diff-regex=<regex>`. 372endif::git-format-patch[] 373 374--no-renames:: 375 Turn off rename detection, even when the configuration 376 file gives the default to do so. 377 378ifndef::git-format-patch[] 379--check:: 380 Warn if changes introduce conflict markers or whitespace errors. 381 What are considered whitespace errors is controlled by `core.whitespace` 382 configuration. By default, trailing whitespaces (including 383 lines that consist solely of whitespaces) and a space character 384 that is immediately followed by a tab character inside the 385 initial indent of the line are considered whitespace errors. 386 Exits with non-zero status if problems are found. Not compatible 387 with --exit-code. 388 389--ws-error-highlight=<kind>:: 390 Highlight whitespace errors in the `context`, `old` or `new` 391 lines of the diff. Multiple values are separated by comma, 392 `none` resets previous values, `default` reset the list to 393 `new` and `all` is a shorthand for `old,new,context`. When 394 this option is not given, and the configuration variable 395 `diff.wsErrorHighlight` is not set, only whitespace errors in 396 `new` lines are highlighted. The whitespace errors are colored 397 with `color.diff.whitespace`. 398 399endif::git-format-patch[] 400 401--full-index:: 402 Instead of the first handful of characters, show the full 403 pre- and post-image blob object names on the "index" 404 line when generating patch format output. 405 406--binary:: 407 In addition to `--full-index`, output a binary diff that 408 can be applied with `git-apply`. 409 410--abbrev[=<n>]:: 411 Instead of showing the full 40-byte hexadecimal object 412 name in diff-raw format output and diff-tree header 413 lines, show only a partial prefix. This is 414 independent of the `--full-index` option above, which controls 415 the diff-patch output format. Non default number of 416 digits can be specified with `--abbrev=<n>`. 417 418-B[<n>][/<m>]:: 419--break-rewrites[=[<n>][/<m>]]:: 420 Break complete rewrite changes into pairs of delete and 421 create. This serves two purposes: 422+ 423It affects the way a change that amounts to a total rewrite of a file 424not as a series of deletion and insertion mixed together with a very 425few lines that happen to match textually as the context, but as a 426single deletion of everything old followed by a single insertion of 427everything new, and the number `m` controls this aspect of the -B 428option (defaults to 60%). `-B/70%` specifies that less than 30% of the 429original should remain in the result for Git to consider it a total 430rewrite (i.e. otherwise the resulting patch will be a series of 431deletion and insertion mixed together with context lines). 432+ 433When used with -M, a totally-rewritten file is also considered as the 434source of a rename (usually -M only considers a file that disappeared 435as the source of a rename), and the number `n` controls this aspect of 436the -B option (defaults to 50%). `-B20%` specifies that a change with 437addition and deletion compared to 20% or more of the file's size are 438eligible for being picked up as a possible source of a rename to 439another file. 440 441-M[<n>]:: 442--find-renames[=<n>]:: 443ifndef::git-log[] 444 Detect renames. 445endif::git-log[] 446ifdef::git-log[] 447 If generating diffs, detect and report renames for each commit. 448 For following files across renames while traversing history, see 449 `--follow`. 450endif::git-log[] 451 If `n` is specified, it is a threshold on the similarity 452 index (i.e. amount of addition/deletions compared to the 453 file's size). For example, `-M90%` means Git should consider a 454 delete/add pair to be a rename if more than 90% of the file 455 hasn't changed. Without a `%` sign, the number is to be read as 456 a fraction, with a decimal point before it. I.e., `-M5` becomes 457 0.5, and is thus the same as `-M50%`. Similarly, `-M05` is 458 the same as `-M5%`. To limit detection to exact renames, use 459 `-M100%`. The default similarity index is 50%. 460 461-C[<n>]:: 462--find-copies[=<n>]:: 463 Detect copies as well as renames. See also `--find-copies-harder`. 464 If `n` is specified, it has the same meaning as for `-M<n>`. 465 466--find-copies-harder:: 467 For performance reasons, by default, `-C` option finds copies only 468 if the original file of the copy was modified in the same 469 changeset. This flag makes the command 470 inspect unmodified files as candidates for the source of 471 copy. This is a very expensive operation for large 472 projects, so use it with caution. Giving more than one 473 `-C` option has the same effect. 474 475-D:: 476--irreversible-delete:: 477 Omit the preimage for deletes, i.e. print only the header but not 478 the diff between the preimage and `/dev/null`. The resulting patch 479 is not meant to be applied with `patch` or `git apply`; this is 480 solely for people who want to just concentrate on reviewing the 481 text after the change. In addition, the output obviously lacks 482 enough information to apply such a patch in reverse, even manually, 483 hence the name of the option. 484+ 485When used together with `-B`, omit also the preimage in the deletion part 486of a delete/create pair. 487 488-l<num>:: 489 The `-M` and `-C` options require O(n^2) processing time where n 490 is the number of potential rename/copy targets. This 491 option prevents rename/copy detection from running if 492 the number of rename/copy targets exceeds the specified 493 number. 494 495ifndef::git-format-patch[] 496--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: 497 Select only files that are Added (`A`), Copied (`C`), 498 Deleted (`D`), Modified (`M`), Renamed (`R`), have their 499 type (i.e. regular file, symlink, submodule, ...) changed (`T`), 500 are Unmerged (`U`), are 501 Unknown (`X`), or have had their pairing Broken (`B`). 502 Any combination of the filter characters (including none) can be used. 503 When `*` (All-or-none) is added to the combination, all 504 paths are selected if there is any file that matches 505 other criteria in the comparison; if there is no file 506 that matches other criteria, nothing is selected. 507+ 508Also, these upper-case letters can be downcased to exclude. E.g. 509`--diff-filter=ad` excludes added and deleted paths. 510+ 511Note that not all diffs can feature all types. For instance, diffs 512from the index to the working tree can never have Added entries 513(because the set of paths included in the diff is limited by what is in 514the index). Similarly, copied and renamed entries cannot appear if 515detection for those types is disabled. 516 517-S<string>:: 518 Look for differences that change the number of occurrences of 519 the specified string (i.e. addition/deletion) in a file. 520 Intended for the scripter's use. 521+ 522It is useful when you're looking for an exact block of code (like a 523struct), and want to know the history of that block since it first 524came into being: use the feature iteratively to feed the interesting 525block in the preimage back into `-S`, and keep going until you get the 526very first version of the block. 527+ 528Binary files are searched as well. 529 530-G<regex>:: 531 Look for differences whose patch text contains added/removed 532 lines that match <regex>. 533+ 534To illustrate the difference between `-S<regex> --pickaxe-regex` and 535`-G<regex>`, consider a commit with the following diff in the same 536file: 537+ 538---- 539+ return !regexec(regexp, two->ptr, 1, ®match, 0); 540... 541- hit = !regexec(regexp, mf2.ptr, 1, ®match, 0); 542---- 543+ 544While `git log -G"regexec\(regexp"` will show this commit, `git log 545-S"regexec\(regexp" --pickaxe-regex` will not (because the number of 546occurrences of that string did not change). 547+ 548Unless `--text` is supplied patches of binary files without a textconv 549filter will be ignored. 550+ 551See the 'pickaxe' entry in linkgit:gitdiffcore[7] for more 552information. 553 554--find-object=<object-id>:: 555 Look for differences that change the number of occurrences of 556 the specified object. Similar to `-S`, just the argument is different 557 in that it doesn't search for a specific string but for a specific 558 object id. 559+ 560The object can be a blob or a submodule commit. It implies the `-t` option in 561`git-log` to also find trees. 562 563--pickaxe-all:: 564 When `-S` or `-G` finds a change, show all the changes in that 565 changeset, not just the files that contain the change 566 in <string>. 567 568--pickaxe-regex:: 569 Treat the <string> given to `-S` as an extended POSIX regular 570 expression to match. 571 572endif::git-format-patch[] 573 574-O<orderfile>:: 575 Control the order in which files appear in the output. 576 This overrides the `diff.orderFile` configuration variable 577 (see linkgit:git-config[1]). To cancel `diff.orderFile`, 578 use `-O/dev/null`. 579+ 580The output order is determined by the order of glob patterns in 581<orderfile>. 582All files with pathnames that match the first pattern are output 583first, all files with pathnames that match the second pattern (but not 584the first) are output next, and so on. 585All files with pathnames that do not match any pattern are output 586last, as if there was an implicit match-all pattern at the end of the 587file. 588If multiple pathnames have the same rank (they match the same pattern 589but no earlier patterns), their output order relative to each other is 590the normal order. 591+ 592<orderfile> is parsed as follows: 593+ 594-- 595 - Blank lines are ignored, so they can be used as separators for 596 readability. 597 598 - Lines starting with a hash ("`#`") are ignored, so they can be used 599 for comments. Add a backslash ("`\`") to the beginning of the 600 pattern if it starts with a hash. 601 602 - Each other line contains a single pattern. 603-- 604+ 605Patterns have the same syntax and semantics as patterns used for 606fnmatch(3) without the FNM_PATHNAME flag, except a pathname also 607matches a pattern if removing any number of the final pathname 608components matches the pattern. For example, the pattern "`foo*bar`" 609matches "`fooasdfbar`" and "`foo/bar/baz/asdf`" but not "`foobarx`". 610 611ifndef::git-format-patch[] 612-R:: 613 Swap two inputs; that is, show differences from index or 614 on-disk file to tree contents. 615 616--relative[=<path>]:: 617 When run from a subdirectory of the project, it can be 618 told to exclude changes outside the directory and show 619 pathnames relative to it with this option. When you are 620 not in a subdirectory (e.g. in a bare repository), you 621 can name which subdirectory to make the output relative 622 to by giving a <path> as an argument. 623endif::git-format-patch[] 624 625-a:: 626--text:: 627 Treat all files as text. 628 629--ignore-cr-at-eol:: 630 Ignore carriage-return at the end of line when doing a comparison. 631 632--ignore-space-at-eol:: 633 Ignore changes in whitespace at EOL. 634 635-b:: 636--ignore-space-change:: 637 Ignore changes in amount of whitespace. This ignores whitespace 638 at line end, and considers all other sequences of one or 639 more whitespace characters to be equivalent. 640 641-w:: 642--ignore-all-space:: 643 Ignore whitespace when comparing lines. This ignores 644 differences even if one line has whitespace where the other 645 line has none. 646 647--ignore-blank-lines:: 648 Ignore changes whose lines are all blank. 649 650--inter-hunk-context=<lines>:: 651 Show the context between diff hunks, up to the specified number 652 of lines, thereby fusing hunks that are close to each other. 653 Defaults to `diff.interHunkContext` or 0 if the config option 654 is unset. 655 656-W:: 657--function-context:: 658 Show whole surrounding functions of changes. 659 660ifndef::git-format-patch[] 661ifndef::git-log[] 662--exit-code:: 663 Make the program exit with codes similar to diff(1). 664 That is, it exits with 1 if there were differences and 665 0 means no differences. 666 667--quiet:: 668 Disable all output of the program. Implies `--exit-code`. 669endif::git-log[] 670endif::git-format-patch[] 671 672--ext-diff:: 673 Allow an external diff helper to be executed. If you set an 674 external diff driver with linkgit:gitattributes[5], you need 675 to use this option with linkgit:git-log[1] and friends. 676 677--no-ext-diff:: 678 Disallow external diff drivers. 679 680--textconv:: 681--no-textconv:: 682 Allow (or disallow) external text conversion filters to be run 683 when comparing binary files. See linkgit:gitattributes[5] for 684 details. Because textconv filters are typically a one-way 685 conversion, the resulting diff is suitable for human 686 consumption, but cannot be applied. For this reason, textconv 687 filters are enabled by default only for linkgit:git-diff[1] and 688 linkgit:git-log[1], but not for linkgit:git-format-patch[1] or 689 diff plumbing commands. 690 691--ignore-submodules[=<when>]:: 692 Ignore changes to submodules in the diff generation. <when> can be 693 either "none", "untracked", "dirty" or "all", which is the default. 694 Using "none" will consider the submodule modified when it either contains 695 untracked or modified files or its HEAD differs from the commit recorded 696 in the superproject and can be used to override any settings of the 697 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When 698 "untracked" is used submodules are not considered dirty when they only 699 contain untracked content (but they are still scanned for modified 700 content). Using "dirty" ignores all changes to the work tree of submodules, 701 only changes to the commits stored in the superproject are shown (this was 702 the behavior until 1.7.0). Using "all" hides all changes to submodules. 703 704--src-prefix=<prefix>:: 705 Show the given source prefix instead of "a/". 706 707--dst-prefix=<prefix>:: 708 Show the given destination prefix instead of "b/". 709 710--no-prefix:: 711 Do not show any source or destination prefix. 712 713--line-prefix=<prefix>:: 714 Prepend an additional prefix to every line of output. 715 716--ita-invisible-in-index:: 717 By default entries added by "git add -N" appear as an existing 718 empty file in "git diff" and a new file in "git diff --cached". 719 This option makes the entry appear as a new file in "git diff" 720 and non-existent in "git diff --cached". This option could be 721 reverted with `--ita-visible-in-index`. Both options are 722 experimental and could be removed in future. 723 724For more detailed explanation on these common options, see also 725linkgit:gitdiffcore[7].