1// Please don't remove this comment as asciidoc behaves badly when 2// the first non-empty line is ifdef/ifndef. The symptom is that 3// without this comment the <git-diff-core> attribute conditionally 4// defined below ends up being defined unconditionally. 5// Last checked with asciidoc 7.0.2. 6 7ifndef::git-format-patch[] 8ifndef::git-diff[] 9ifndef::git-log[] 10:git-diff-core: 1 11endif::git-log[] 12endif::git-diff[] 13endif::git-format-patch[] 14 15ifdef::git-format-patch[] 16-p:: 17--no-stat:: 18 Generate plain patches without any diffstats. 19endif::git-format-patch[] 20 21ifndef::git-format-patch[] 22-p:: 23-u:: 24--patch:: 25 Generate patch (see section on generating patches). 26ifdef::git-diff[] 27 This is the default. 28endif::git-diff[] 29 30-s:: 31--no-patch:: 32 Suppress diff output. Useful for commands like `git show` that 33 show the patch by default, or to cancel the effect of `--patch`. 34endif::git-format-patch[] 35 36-U<n>:: 37--unified=<n>:: 38 Generate diffs with <n> lines of context instead of 39 the usual three. 40ifndef::git-format-patch[] 41 Implies `-p`. 42endif::git-format-patch[] 43 44ifndef::git-format-patch[] 45--raw:: 46ifndef::git-log[] 47 Generate the diff in raw format. 48ifdef::git-diff-core[] 49 This is the default. 50endif::git-diff-core[] 51endif::git-log[] 52ifdef::git-log[] 53 For each commit, show a summary of changes using the raw diff 54 format. See the "RAW OUTPUT FORMAT" section of 55 linkgit:git-diff[1]. This is different from showing the log 56 itself in raw format, which you can achieve with 57 `--format=raw`. 58endif::git-log[] 59endif::git-format-patch[] 60 61ifndef::git-format-patch[] 62--patch-with-raw:: 63 Synonym for `-p --raw`. 64endif::git-format-patch[] 65 66include::diff-heuristic-options.txt[] 67 68--minimal:: 69 Spend extra time to make sure the smallest possible 70 diff is produced. 71 72--patience:: 73 Generate a diff using the "patience diff" algorithm. 74 75--histogram:: 76 Generate a diff using the "histogram diff" algorithm. 77 78--diff-algorithm={patience|minimal|histogram|myers}:: 79 Choose a diff algorithm. The variants are as follows: 80+ 81-- 82`default`, `myers`;; 83 The basic greedy diff algorithm. Currently, this is the default. 84`minimal`;; 85 Spend extra time to make sure the smallest possible diff is 86 produced. 87`patience`;; 88 Use "patience diff" algorithm when generating patches. 89`histogram`;; 90 This algorithm extends the patience algorithm to "support 91 low-occurrence common elements". 92-- 93+ 94For instance, if you configured diff.algorithm variable to a 95non-default value and want to use the default one, then you 96have to use `--diff-algorithm=default` option. 97 98--stat[=<width>[,<name-width>[,<count>]]]:: 99 Generate a diffstat. By default, as much space as necessary 100 will be used for the filename part, and the rest for the graph 101 part. Maximum width defaults to terminal width, or 80 columns 102 if not connected to a terminal, and can be overridden by 103 `<width>`. The width of the filename part can be limited by 104 giving another width `<name-width>` after a comma. The width 105 of the graph part can be limited by using 106 `--stat-graph-width=<width>` (affects all commands generating 107 a stat graph) or by setting `diff.statGraphWidth=<width>` 108 (does not affect `git format-patch`). 109 By giving a third parameter `<count>`, you can limit the 110 output to the first `<count>` lines, followed by `...` if 111 there are more. 112+ 113These parameters can also be set individually with `--stat-width=<width>`, 114`--stat-name-width=<name-width>` and `--stat-count=<count>`. 115 116--numstat:: 117 Similar to `--stat`, but shows number of added and 118 deleted lines in decimal notation and pathname without 119 abbreviation, to make it more machine friendly. For 120 binary files, outputs two `-` instead of saying 121 `0 0`. 122 123--shortstat:: 124 Output only the last line of the `--stat` format containing total 125 number of modified files, as well as number of added and deleted 126 lines. 127 128--dirstat[=<param1,param2,...>]:: 129 Output the distribution of relative amount of changes for each 130 sub-directory. The behavior of `--dirstat` can be customized by 131 passing it a comma separated list of parameters. 132 The defaults are controlled by the `diff.dirstat` configuration 133 variable (see linkgit:git-config[1]). 134 The following parameters are available: 135+ 136-- 137`changes`;; 138 Compute the dirstat numbers by counting the lines that have been 139 removed from the source, or added to the destination. This ignores 140 the amount of pure code movements within a file. In other words, 141 rearranging lines in a file is not counted as much as other changes. 142 This is the default behavior when no parameter is given. 143`lines`;; 144 Compute the dirstat numbers by doing the regular line-based diff 145 analysis, and summing the removed/added line counts. (For binary 146 files, count 64-byte chunks instead, since binary files have no 147 natural concept of lines). This is a more expensive `--dirstat` 148 behavior than the `changes` behavior, but it does count rearranged 149 lines within a file as much as other changes. The resulting output 150 is consistent with what you get from the other `--*stat` options. 151`files`;; 152 Compute the dirstat numbers by counting the number of files changed. 153 Each changed file counts equally in the dirstat analysis. This is 154 the computationally cheapest `--dirstat` behavior, since it does 155 not have to look at the file contents at all. 156`cumulative`;; 157 Count changes in a child directory for the parent directory as well. 158 Note that when using `cumulative`, the sum of the percentages 159 reported may exceed 100%. The default (non-cumulative) behavior can 160 be specified with the `noncumulative` parameter. 161<limit>;; 162 An integer parameter specifies a cut-off percent (3% by default). 163 Directories contributing less than this percentage of the changes 164 are not shown in the output. 165-- 166+ 167Example: The following will count changed files, while ignoring 168directories with less than 10% of the total amount of changed files, 169and accumulating child directory counts in the parent directories: 170`--dirstat=files,10,cumulative`. 171 172--summary:: 173 Output a condensed summary of extended header information 174 such as creations, renames and mode changes. 175 176ifndef::git-format-patch[] 177--patch-with-stat:: 178 Synonym for `-p --stat`. 179endif::git-format-patch[] 180 181ifndef::git-format-patch[] 182 183-z:: 184ifdef::git-log[] 185 Separate the commits with NULs instead of with new newlines. 186+ 187Also, when `--raw` or `--numstat` has been given, do not munge 188pathnames and use NULs as output field terminators. 189endif::git-log[] 190ifndef::git-log[] 191 When `--raw`, `--numstat`, `--name-only` or `--name-status` has been 192 given, do not munge pathnames and use NULs as output field terminators. 193endif::git-log[] 194+ 195Without this option, each pathname output will have TAB, LF, double quotes, 196and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, 197respectively, and the pathname will be enclosed in double quotes if 198any of those replacements occurred. 199 200--name-only:: 201 Show only names of changed files. 202 203--name-status:: 204 Show only names and status of changed files. See the description 205 of the `--diff-filter` option on what the status letters mean. 206 207--submodule[=<format>]:: 208 Specify how differences in submodules are shown. When specifying 209 `--submodule=short` the 'short' format is used. This format just 210 shows the names of the commits at the beginning and end of the range. 211 When `--submodule` or `--submodule=log` is specified, the 'log' 212 format is used. This format lists the commits in the range like 213 linkgit:git-submodule[1] `summary` does. When `--submodule=diff` 214 is specified, the 'diff' format is used. This format shows an 215 inline diff of the changes in the submodule contents between the 216 commit range. Defaults to `diff.submodule` or the 'short' format 217 if the config option is unset. 218 219--color[=<when>]:: 220 Show colored diff. 221 `--color` (i.e. without '=<when>') is the same as `--color=always`. 222 '<when>' can be one of `always`, `never`, or `auto`. 223ifdef::git-diff[] 224 It can be changed by the `color.ui` and `color.diff` 225 configuration settings. 226endif::git-diff[] 227 228--no-color:: 229 Turn off colored diff. 230ifdef::git-diff[] 231 This can be used to override configuration settings. 232endif::git-diff[] 233 It is the same as `--color=never`. 234 235--word-diff[=<mode>]:: 236 Show a word diff, using the <mode> to delimit changed words. 237 By default, words are delimited by whitespace; see 238 `--word-diff-regex` below. The <mode> defaults to 'plain', and 239 must be one of: 240+ 241-- 242color:: 243 Highlight changed words using only colors. Implies `--color`. 244plain:: 245 Show words as `[-removed-]` and `{+added+}`. Makes no 246 attempts to escape the delimiters if they appear in the input, 247 so the output may be ambiguous. 248porcelain:: 249 Use a special line-based format intended for script 250 consumption. Added/removed/unchanged runs are printed in the 251 usual unified diff format, starting with a `+`/`-`/` ` 252 character at the beginning of the line and extending to the 253 end of the line. Newlines in the input are represented by a 254 tilde `~` on a line of its own. 255none:: 256 Disable word diff again. 257-- 258+ 259Note that despite the name of the first mode, color is used to 260highlight the changed parts in all modes if enabled. 261 262--word-diff-regex=<regex>:: 263 Use <regex> to decide what a word is, instead of considering 264 runs of non-whitespace to be a word. Also implies 265 `--word-diff` unless it was already enabled. 266+ 267Every non-overlapping match of the 268<regex> is considered a word. Anything between these matches is 269considered whitespace and ignored(!) for the purposes of finding 270differences. You may want to append `|[^[:space:]]` to your regular 271expression to make sure that it matches all non-whitespace characters. 272A match that contains a newline is silently truncated(!) at the 273newline. 274+ 275For example, `--word-diff-regex=.` will treat each character as a word 276and, correspondingly, show differences character by character. 277+ 278The regex can also be set via a diff driver or configuration option, see 279linkgit:gitattributes[5] or linkgit:git-config[1]. Giving it explicitly 280overrides any diff driver or configuration setting. Diff drivers 281override configuration settings. 282 283--color-words[=<regex>]:: 284 Equivalent to `--word-diff=color` plus (if a regex was 285 specified) `--word-diff-regex=<regex>`. 286endif::git-format-patch[] 287 288--no-renames:: 289 Turn off rename detection, even when the configuration 290 file gives the default to do so. 291 292ifndef::git-format-patch[] 293--check:: 294 Warn if changes introduce conflict markers or whitespace errors. 295 What are considered whitespace errors is controlled by `core.whitespace` 296 configuration. By default, trailing whitespaces (including 297 lines that solely consist of whitespaces) and a space character 298 that is immediately followed by a tab character inside the 299 initial indent of the line are considered whitespace errors. 300 Exits with non-zero status if problems are found. Not compatible 301 with --exit-code. 302 303--ws-error-highlight=<kind>:: 304 Highlight whitespace errors on lines specified by <kind> 305 in the color specified by `color.diff.whitespace`. <kind> 306 is a comma separated list of `old`, `new`, `context`. When 307 this option is not given, only whitespace errors in `new` 308 lines are highlighted. E.g. `--ws-error-highlight=new,old` 309 highlights whitespace errors on both deleted and added lines. 310 `all` can be used as a short-hand for `old,new,context`. 311 312endif::git-format-patch[] 313 314--full-index:: 315 Instead of the first handful of characters, show the full 316 pre- and post-image blob object names on the "index" 317 line when generating patch format output. 318 319--binary:: 320 In addition to `--full-index`, output a binary diff that 321 can be applied with `git-apply`. 322 323--abbrev[=<n>]:: 324 Instead of showing the full 40-byte hexadecimal object 325 name in diff-raw format output and diff-tree header 326 lines, show only a partial prefix. This is 327 independent of the `--full-index` option above, which controls 328 the diff-patch output format. Non default number of 329 digits can be specified with `--abbrev=<n>`. 330 331-B[<n>][/<m>]:: 332--break-rewrites[=[<n>][/<m>]]:: 333 Break complete rewrite changes into pairs of delete and 334 create. This serves two purposes: 335+ 336It affects the way a change that amounts to a total rewrite of a file 337not as a series of deletion and insertion mixed together with a very 338few lines that happen to match textually as the context, but as a 339single deletion of everything old followed by a single insertion of 340everything new, and the number `m` controls this aspect of the -B 341option (defaults to 60%). `-B/70%` specifies that less than 30% of the 342original should remain in the result for Git to consider it a total 343rewrite (i.e. otherwise the resulting patch will be a series of 344deletion and insertion mixed together with context lines). 345+ 346When used with -M, a totally-rewritten file is also considered as the 347source of a rename (usually -M only considers a file that disappeared 348as the source of a rename), and the number `n` controls this aspect of 349the -B option (defaults to 50%). `-B20%` specifies that a change with 350addition and deletion compared to 20% or more of the file's size are 351eligible for being picked up as a possible source of a rename to 352another file. 353 354-M[<n>]:: 355--find-renames[=<n>]:: 356ifndef::git-log[] 357 Detect renames. 358endif::git-log[] 359ifdef::git-log[] 360 If generating diffs, detect and report renames for each commit. 361 For following files across renames while traversing history, see 362 `--follow`. 363endif::git-log[] 364 If `n` is specified, it is a threshold on the similarity 365 index (i.e. amount of addition/deletions compared to the 366 file's size). For example, `-M90%` means Git should consider a 367 delete/add pair to be a rename if more than 90% of the file 368 hasn't changed. Without a `%` sign, the number is to be read as 369 a fraction, with a decimal point before it. I.e., `-M5` becomes 370 0.5, and is thus the same as `-M50%`. Similarly, `-M05` is 371 the same as `-M5%`. To limit detection to exact renames, use 372 `-M100%`. The default similarity index is 50%. 373 374-C[<n>]:: 375--find-copies[=<n>]:: 376 Detect copies as well as renames. See also `--find-copies-harder`. 377 If `n` is specified, it has the same meaning as for `-M<n>`. 378 379--find-copies-harder:: 380 For performance reasons, by default, `-C` option finds copies only 381 if the original file of the copy was modified in the same 382 changeset. This flag makes the command 383 inspect unmodified files as candidates for the source of 384 copy. This is a very expensive operation for large 385 projects, so use it with caution. Giving more than one 386 `-C` option has the same effect. 387 388-D:: 389--irreversible-delete:: 390 Omit the preimage for deletes, i.e. print only the header but not 391 the diff between the preimage and `/dev/null`. The resulting patch 392 is not meant to be applied with `patch` or `git apply`; this is 393 solely for people who want to just concentrate on reviewing the 394 text after the change. In addition, the output obviously lack 395 enough information to apply such a patch in reverse, even manually, 396 hence the name of the option. 397+ 398When used together with `-B`, omit also the preimage in the deletion part 399of a delete/create pair. 400 401-l<num>:: 402 The `-M` and `-C` options require O(n^2) processing time where n 403 is the number of potential rename/copy targets. This 404 option prevents rename/copy detection from running if 405 the number of rename/copy targets exceeds the specified 406 number. 407 408ifndef::git-format-patch[] 409--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: 410 Select only files that are Added (`A`), Copied (`C`), 411 Deleted (`D`), Modified (`M`), Renamed (`R`), have their 412 type (i.e. regular file, symlink, submodule, ...) changed (`T`), 413 are Unmerged (`U`), are 414 Unknown (`X`), or have had their pairing Broken (`B`). 415 Any combination of the filter characters (including none) can be used. 416 When `*` (All-or-none) is added to the combination, all 417 paths are selected if there is any file that matches 418 other criteria in the comparison; if there is no file 419 that matches other criteria, nothing is selected. 420+ 421Also, these upper-case letters can be downcased to exclude. E.g. 422`--diff-filter=ad` excludes added and deleted paths. 423 424-S<string>:: 425 Look for differences that change the number of occurrences of 426 the specified string (i.e. addition/deletion) in a file. 427 Intended for the scripter's use. 428+ 429It is useful when you're looking for an exact block of code (like a 430struct), and want to know the history of that block since it first 431came into being: use the feature iteratively to feed the interesting 432block in the preimage back into `-S`, and keep going until you get the 433very first version of the block. 434 435-G<regex>:: 436 Look for differences whose patch text contains added/removed 437 lines that match <regex>. 438+ 439To illustrate the difference between `-S<regex> --pickaxe-regex` and 440`-G<regex>`, consider a commit with the following diff in the same 441file: 442+ 443---- 444+ return !regexec(regexp, two->ptr, 1, ®match, 0); 445... 446- hit = !regexec(regexp, mf2.ptr, 1, ®match, 0); 447---- 448+ 449While `git log -G"regexec\(regexp"` will show this commit, `git log 450-S"regexec\(regexp" --pickaxe-regex` will not (because the number of 451occurrences of that string did not change). 452+ 453See the 'pickaxe' entry in linkgit:gitdiffcore[7] for more 454information. 455 456--pickaxe-all:: 457 When `-S` or `-G` finds a change, show all the changes in that 458 changeset, not just the files that contain the change 459 in <string>. 460 461--pickaxe-regex:: 462 Treat the <string> given to `-S` as an extended POSIX regular 463 expression to match. 464endif::git-format-patch[] 465 466-O<orderfile>:: 467 Output the patch in the order specified in the 468 <orderfile>, which has one shell glob pattern per line. 469 This overrides the `diff.orderFile` configuration variable 470 (see linkgit:git-config[1]). To cancel `diff.orderFile`, 471 use `-O/dev/null`. 472 473ifndef::git-format-patch[] 474-R:: 475 Swap two inputs; that is, show differences from index or 476 on-disk file to tree contents. 477 478--relative[=<path>]:: 479 When run from a subdirectory of the project, it can be 480 told to exclude changes outside the directory and show 481 pathnames relative to it with this option. When you are 482 not in a subdirectory (e.g. in a bare repository), you 483 can name which subdirectory to make the output relative 484 to by giving a <path> as an argument. 485endif::git-format-patch[] 486 487-a:: 488--text:: 489 Treat all files as text. 490 491--ignore-space-at-eol:: 492 Ignore changes in whitespace at EOL. 493 494-b:: 495--ignore-space-change:: 496 Ignore changes in amount of whitespace. This ignores whitespace 497 at line end, and considers all other sequences of one or 498 more whitespace characters to be equivalent. 499 500-w:: 501--ignore-all-space:: 502 Ignore whitespace when comparing lines. This ignores 503 differences even if one line has whitespace where the other 504 line has none. 505 506--ignore-blank-lines:: 507 Ignore changes whose lines are all blank. 508 509--inter-hunk-context=<lines>:: 510 Show the context between diff hunks, up to the specified number 511 of lines, thereby fusing hunks that are close to each other. 512 513-W:: 514--function-context:: 515 Show whole surrounding functions of changes. 516 517ifndef::git-format-patch[] 518ifndef::git-log[] 519--exit-code:: 520 Make the program exit with codes similar to diff(1). 521 That is, it exits with 1 if there were differences and 522 0 means no differences. 523 524--quiet:: 525 Disable all output of the program. Implies `--exit-code`. 526endif::git-log[] 527endif::git-format-patch[] 528 529--ext-diff:: 530 Allow an external diff helper to be executed. If you set an 531 external diff driver with linkgit:gitattributes[5], you need 532 to use this option with linkgit:git-log[1] and friends. 533 534--no-ext-diff:: 535 Disallow external diff drivers. 536 537--textconv:: 538--no-textconv:: 539 Allow (or disallow) external text conversion filters to be run 540 when comparing binary files. See linkgit:gitattributes[5] for 541 details. Because textconv filters are typically a one-way 542 conversion, the resulting diff is suitable for human 543 consumption, but cannot be applied. For this reason, textconv 544 filters are enabled by default only for linkgit:git-diff[1] and 545 linkgit:git-log[1], but not for linkgit:git-format-patch[1] or 546 diff plumbing commands. 547 548--ignore-submodules[=<when>]:: 549 Ignore changes to submodules in the diff generation. <when> can be 550 either "none", "untracked", "dirty" or "all", which is the default. 551 Using "none" will consider the submodule modified when it either contains 552 untracked or modified files or its HEAD differs from the commit recorded 553 in the superproject and can be used to override any settings of the 554 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When 555 "untracked" is used submodules are not considered dirty when they only 556 contain untracked content (but they are still scanned for modified 557 content). Using "dirty" ignores all changes to the work tree of submodules, 558 only changes to the commits stored in the superproject are shown (this was 559 the behavior until 1.7.0). Using "all" hides all changes to submodules. 560 561--src-prefix=<prefix>:: 562 Show the given source prefix instead of "a/". 563 564--dst-prefix=<prefix>:: 565 Show the given destination prefix instead of "b/". 566 567--no-prefix:: 568 Do not show any source or destination prefix. 569 570--line-prefix=<prefix>:: 571 Prepend an additional prefix to every line of output. 572 573For more detailed explanation on these common options, see also 574linkgit:gitdiffcore[7].