1#include "cache.h"
2#include "dir.h"
3static int inside_git_dir = -1;
5static int inside_work_tree = -1;
6const char *prefix_path(const char *prefix, int len, const char *path)
8{
9 const char *orig = path;
10 char *sanitized = xmalloc(len + strlen(path) + 1);
11 if (is_absolute_path(orig))
12 strcpy(sanitized, path);
13 else {
14 if (len)
15 memcpy(sanitized, prefix, len);
16 strcpy(sanitized + len, path);
17 }
18 if (normalize_path_copy(sanitized, sanitized))
19 goto error_out;
20 if (is_absolute_path(orig)) {
21 size_t root_len, len, total;
22 const char *work_tree = get_git_work_tree();
23 if (!work_tree)
24 goto error_out;
25 len = strlen(work_tree);
26 root_len = offset_1st_component(work_tree);
27 total = strlen(sanitized) + 1;
28 if (strncmp(sanitized, work_tree, len) ||
29 (len > root_len && sanitized[len] != '\0' && sanitized[len] != '/')) {
30 error_out:
31 die("'%s' is outside repository", orig);
32 }
33 if (sanitized[len] == '/')
34 len++;
35 memmove(sanitized, sanitized + len, total - len);
36 }
37 return sanitized;
38}
39/*
41 * Unlike prefix_path, this should be used if the named file does
42 * not have to interact with index entry; i.e. name of a random file
43 * on the filesystem.
44 */
45const char *prefix_filename(const char *pfx, int pfx_len, const char *arg)
46{
47 static char path[PATH_MAX];
48#ifndef WIN32
49 if (!pfx || !*pfx || is_absolute_path(arg))
50 return arg;
51 memcpy(path, pfx, pfx_len);
52 strcpy(path + pfx_len, arg);
53#else
54 char *p;
55 /* don't add prefix to absolute paths, but still replace '\' by '/' */
56 if (is_absolute_path(arg))
57 pfx_len = 0;
58 else
59 memcpy(path, pfx, pfx_len);
60 strcpy(path + pfx_len, arg);
61 for (p = path + pfx_len; *p; p++)
62 if (*p == '\\')
63 *p = '/';
64#endif
65 return path;
66}
67int check_filename(const char *prefix, const char *arg)
69{
70 const char *name;
71 struct stat st;
72 name = prefix ? prefix_filename(prefix, strlen(prefix), arg) : arg;
74 if (!lstat(name, &st))
75 return 1; /* file exists */
76 if (errno == ENOENT || errno == ENOTDIR)
77 return 0; /* file does not exist */
78 die_errno("failed to stat '%s'", arg);
79}
80static void NORETURN die_verify_filename(const char *prefix, const char *arg)
82{
83 unsigned char sha1[20];
84 unsigned mode;
85 /* try a detailed diagnostic ... */
86 get_sha1_with_mode_1(arg, sha1, &mode, 0, prefix);
87 /* ... or fall back the most general message. */
88 die("ambiguous argument '%s': unknown revision or path not in the working tree.\n"
89 "Use '--' to separate paths from revisions", arg);
90}
92/*
94 * Verify a filename that we got as an argument for a pathspec
95 * entry. Note that a filename that begins with "-" never verifies
96 * as true, because even if such a filename were to exist, we want
97 * it to be preceded by the "--" marker (or we want the user to
98 * use a format like "./-filename")
99 */
100void verify_filename(const char *prefix, const char *arg)
101{
102 if (*arg == '-')
103 die("bad flag '%s' used after filename", arg);
104 if (check_filename(prefix, arg))
105 return;
106 die_verify_filename(prefix, arg);
107}
108/*
110 * Opposite of the above: the command line did not have -- marker
111 * and we parsed the arg as a refname. It should not be interpretable
112 * as a filename.
113 */
114void verify_non_filename(const char *prefix, const char *arg)
115{
116 if (!is_inside_work_tree() || is_inside_git_dir())
117 return;
118 if (*arg == '-')
119 return; /* flag */
120 if (!check_filename(prefix, arg))
121 return;
122 die("ambiguous argument '%s': both revision and filename\n"
123 "Use '--' to separate filenames from revisions", arg);
124}
125const char **get_pathspec(const char *prefix, const char **pathspec)
127{
128 const char *entry = *pathspec;
129 const char **src, **dst;
130 int prefixlen;
131 if (!prefix && !entry)
133 return NULL;
134 if (!entry) {
136 static const char *spec[2];
137 spec[0] = prefix;
138 spec[1] = NULL;
139 return spec;
140 }
141 /* Otherwise we have to re-write the entries.. */
143 src = pathspec;
144 dst = pathspec;
145 prefixlen = prefix ? strlen(prefix) : 0;
146 while (*src) {
147 const char *p = prefix_path(prefix, prefixlen, *src);
148 *(dst++) = p;
149 src++;
150 }
151 *dst = NULL;
152 if (!*pathspec)
153 return NULL;
154 return pathspec;
155}
156/*
158 * Test if it looks like we're at a git directory.
159 * We want to see:
160 *
161 * - either an objects/ directory _or_ the proper
162 * GIT_OBJECT_DIRECTORY environment variable
163 * - a refs/ directory
164 * - either a HEAD symlink or a HEAD file that is formatted as
165 * a proper "ref:", or a regular file HEAD that has a properly
166 * formatted sha1 object name.
167 */
168static int is_git_directory(const char *suspect)
169{
170 char path[PATH_MAX];
171 size_t len = strlen(suspect);
172 if (PATH_MAX <= len + strlen("/objects"))
174 die("Too long path: %.*s", 60, suspect);
175 strcpy(path, suspect);
176 if (getenv(DB_ENVIRONMENT)) {
177 if (access(getenv(DB_ENVIRONMENT), X_OK))
178 return 0;
179 }
180 else {
181 strcpy(path + len, "/objects");
182 if (access(path, X_OK))
183 return 0;
184 }
185 strcpy(path + len, "/refs");
187 if (access(path, X_OK))
188 return 0;
189 strcpy(path + len, "/HEAD");
191 if (validate_headref(path))
192 return 0;
193 return 1;
195}
196int is_inside_git_dir(void)
198{
199 if (inside_git_dir < 0)
200 inside_git_dir = is_inside_dir(get_git_dir());
201 return inside_git_dir;
202}
203int is_inside_work_tree(void)
205{
206 if (inside_work_tree < 0)
207 inside_work_tree = is_inside_dir(get_git_work_tree());
208 return inside_work_tree;
209}
210/*
212 * set_work_tree() is only ever called if you set GIT_DIR explicitly.
213 * The old behaviour (which we retain here) is to set the work tree root
214 * to the cwd, unless overridden by the config, the command line, or
215 * GIT_WORK_TREE.
216 */
217static const char *set_work_tree(const char *dir)
218{
219 char buffer[PATH_MAX + 1];
220 if (!getcwd(buffer, sizeof(buffer)))
222 die ("Could not get the current working directory");
223 git_work_tree_cfg = xstrdup(buffer);
224 inside_work_tree = 1;
225 return NULL;
227}
228void setup_work_tree(void)
230{
231 const char *work_tree, *git_dir;
232 static int initialized = 0;
233 if (initialized)
235 return;
236 work_tree = get_git_work_tree();
237 git_dir = get_git_dir();
238 if (!is_absolute_path(git_dir))
239 git_dir = make_absolute_path(git_dir);
240 if (!work_tree || chdir(work_tree))
241 die("This operation must be run in a work tree");
242 set_git_dir(make_relative_path(git_dir, work_tree));
243 initialized = 1;
244}
245static int check_repository_format_gently(int *nongit_ok)
247{
248 git_config(check_repository_format_version, NULL);
249 if (GIT_REPO_VERSION < repository_format_version) {
250 if (!nongit_ok)
251 die ("Expected git repo version <= %d, found %d",
252 GIT_REPO_VERSION, repository_format_version);
253 warning("Expected git repo version <= %d, found %d",
254 GIT_REPO_VERSION, repository_format_version);
255 warning("Please upgrade Git");
256 *nongit_ok = -1;
257 return -1;
258 }
259 return 0;
260}
261/*
263 * Try to read the location of the git directory from the .git file,
264 * return path to git directory if found.
265 */
266const char *read_gitfile_gently(const char *path)
267{
268 char *buf;
269 char *dir;
270 const char *slash;
271 struct stat st;
272 int fd;
273 size_t len;
274 if (stat(path, &st))
276 return NULL;
277 if (!S_ISREG(st.st_mode))
278 return NULL;
279 fd = open(path, O_RDONLY);
280 if (fd < 0)
281 die_errno("Error opening '%s'", path);
282 buf = xmalloc(st.st_size + 1);
283 len = read_in_full(fd, buf, st.st_size);
284 close(fd);
285 if (len != st.st_size)
286 die("Error reading %s", path);
287 buf[len] = '\0';
288 if (prefixcmp(buf, "gitdir: "))
289 die("Invalid gitfile format: %s", path);
290 while (buf[len - 1] == '\n' || buf[len - 1] == '\r')
291 len--;
292 if (len < 9)
293 die("No path in gitfile: %s", path);
294 buf[len] = '\0';
295 dir = buf + 8;
296 if (!is_absolute_path(dir) && (slash = strrchr(path, '/'))) {
298 size_t pathlen = slash+1 - path;
299 size_t dirlen = pathlen + len - 8;
300 dir = xmalloc(dirlen + 1);
301 strncpy(dir, path, pathlen);
302 strncpy(dir + pathlen, buf + 8, len - 8);
303 dir[dirlen] = '\0';
304 free(buf);
305 buf = dir;
306 }
307 if (!is_git_directory(dir))
309 die("Not a git repository: %s", dir);
310 path = make_absolute_path(dir);
311 free(buf);
313 return path;
314}
315/*
317 * We cannot decide in this function whether we are in the work tree or
318 * not, since the config can only be read _after_ this function was called.
319 */
320static const char *setup_git_directory_gently_1(int *nongit_ok)
321{
322 const char *work_tree_env = getenv(GIT_WORK_TREE_ENVIRONMENT);
323 const char *env_ceiling_dirs = getenv(CEILING_DIRECTORIES_ENVIRONMENT);
324 static char cwd[PATH_MAX+1];
325 const char *gitdirenv;
326 const char *gitfile_dir;
327 int len, offset, ceil_offset, root_len;
328 dev_t current_device = 0;
329 int one_filesystem = 1;
330 struct stat buf;
331 /*
333 * Let's assume that we are in a git repository.
334 * If it turns out later that we are somewhere else, the value will be
335 * updated accordingly.
336 */
337 if (nongit_ok)
338 *nongit_ok = 0;
339 /*
341 * If GIT_DIR is set explicitly, we're not going
342 * to do any discovery, but we still do repository
343 * validation.
344 */
345 gitdirenv = getenv(GIT_DIR_ENVIRONMENT);
346 if (gitdirenv) {
347 if (PATH_MAX - 40 < strlen(gitdirenv))
348 die("'$%s' too big", GIT_DIR_ENVIRONMENT);
349 if (is_git_directory(gitdirenv)) {
350 static char buffer[1024 + 1];
351 const char *retval;
352 if (!work_tree_env) {
354 retval = set_work_tree(gitdirenv);
355 /* config may override worktree */
356 if (check_repository_format_gently(nongit_ok))
357 return NULL;
358 return retval;
359 }
360 if (check_repository_format_gently(nongit_ok))
361 return NULL;
362 retval = get_relative_cwd(buffer, sizeof(buffer) - 1,
363 get_git_work_tree());
364 if (!retval || !*retval)
365 return NULL;
366 set_git_dir(make_absolute_path(gitdirenv));
367 if (chdir(work_tree_env) < 0)
368 die_errno ("Could not chdir to '%s'", work_tree_env);
369 strcat(buffer, "/");
370 return retval;
371 }
372 if (nongit_ok) {
373 *nongit_ok = 1;
374 return NULL;
375 }
376 die("Not a git repository: '%s'", gitdirenv);
377 }
378 if (!getcwd(cwd, sizeof(cwd)-1))
380 die_errno("Unable to read current working directory");
381 ceil_offset = longest_ancestor_length(cwd, env_ceiling_dirs);
383 if (ceil_offset < 0 && has_dos_drive_prefix(cwd))
384 ceil_offset = 1;
385 /*
387 * Test in the following order (relative to the cwd):
388 * - .git (file containing "gitdir: <path>")
389 * - .git/
390 * - ./ (bare)
391 * - ../.git
392 * - ../.git/
393 * - ../ (bare)
394 * - ../../.git/
395 * etc.
396 */
397 offset = len = strlen(cwd);
398 one_filesystem = !git_env_bool("GIT_DISCOVERY_ACROSS_FILESYSTEM", 0);
399 if (one_filesystem) {
400 if (stat(".", &buf))
401 die_errno("failed to stat '.'");
402 current_device = buf.st_dev;
403 }
404 for (;;) {
405 gitfile_dir = read_gitfile_gently(DEFAULT_GIT_DIR_ENVIRONMENT);
406 if (gitfile_dir) {
407 if (set_git_dir(gitfile_dir))
408 die("Repository setup failed");
409 break;
410 }
411 if (is_git_directory(DEFAULT_GIT_DIR_ENVIRONMENT))
412 break;
413 if (is_git_directory(".")) {
414 inside_git_dir = 1;
415 if (!work_tree_env)
416 inside_work_tree = 0;
417 if (offset != len) {
418 root_len = offset_1st_component(cwd);
419 cwd[offset > root_len ? offset : root_len] = '\0';
420 set_git_dir(cwd);
421 } else
422 set_git_dir(".");
423 check_repository_format_gently(nongit_ok);
424 return NULL;
425 }
426 while (--offset > ceil_offset && cwd[offset] != '/');
427 if (offset <= ceil_offset) {
428 if (nongit_ok) {
429 if (chdir(cwd))
430 die_errno("Cannot come back to cwd");
431 *nongit_ok = 1;
432 return NULL;
433 }
434 die("Not a git repository (or any of the parent directories): %s", DEFAULT_GIT_DIR_ENVIRONMENT);
435 }
436 if (one_filesystem) {
437 if (stat("..", &buf)) {
438 cwd[offset] = '\0';
439 die_errno("failed to stat '%s/..'", cwd);
440 }
441 if (buf.st_dev != current_device) {
442 if (nongit_ok) {
443 if (chdir(cwd))
444 die_errno("Cannot come back to cwd");
445 *nongit_ok = 1;
446 return NULL;
447 }
448 cwd[offset] = '\0';
449 die("Not a git repository (or any parent up to mount parent %s)\n"
450 "Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).", cwd);
451 }
452 }
453 if (chdir("..")) {
454 cwd[offset] = '\0';
455 die_errno("Cannot change to '%s/..'", cwd);
456 }
457 }
458 inside_git_dir = 0;
460 if (!work_tree_env)
461 inside_work_tree = 1;
462 root_len = offset_1st_component(cwd);
463 git_work_tree_cfg = xstrndup(cwd, offset > root_len ? offset : root_len);
464 if (check_repository_format_gently(nongit_ok))
465 return NULL;
466 if (offset == len)
467 return NULL;
468 /* Make "offset" point to past the '/', and add a '/' at the end */
470 offset++;
471 cwd[len++] = '/';
472 cwd[len] = 0;
473 return cwd + offset;
474}
475const char *setup_git_directory_gently(int *nongit_ok)
477{
478 const char *prefix;
479 prefix = setup_git_directory_gently_1(nongit_ok);
481 if (startup_info)
482 startup_info->have_repository = !nongit_ok || !*nongit_ok;
483 return prefix;
484}
485int git_config_perm(const char *var, const char *value)
487{
488 int i;
489 char *endptr;
490 if (value == NULL)
492 return PERM_GROUP;
493 if (!strcmp(value, "umask"))
495 return PERM_UMASK;
496 if (!strcmp(value, "group"))
497 return PERM_GROUP;
498 if (!strcmp(value, "all") ||
499 !strcmp(value, "world") ||
500 !strcmp(value, "everybody"))
501 return PERM_EVERYBODY;
502 /* Parse octal numbers */
504 i = strtol(value, &endptr, 8);
505 /* If not an octal number, maybe true/false? */
507 if (*endptr != 0)
508 return git_config_bool(var, value) ? PERM_GROUP : PERM_UMASK;
509 /*
511 * Treat values 0, 1 and 2 as compatibility cases, otherwise it is
512 * a chmod value to restrict to.
513 */
514 switch (i) {
515 case PERM_UMASK: /* 0 */
516 return PERM_UMASK;
517 case OLD_PERM_GROUP: /* 1 */
518 return PERM_GROUP;
519 case OLD_PERM_EVERYBODY: /* 2 */
520 return PERM_EVERYBODY;
521 }
522 /* A filemode value was given: 0xxx */
524 if ((i & 0600) != 0600)
526 die("Problem with core.sharedRepository filemode value "
527 "(0%.3o).\nThe owner of files must always have "
528 "read and write permissions.", i);
529 /*
531 * Mask filemode value. Others can not get write permission.
532 * x flags for directories are handled separately.
533 */
534 return -(i & 0666);
535}
536int check_repository_format_version(const char *var, const char *value, void *cb)
538{
539 if (strcmp(var, "core.repositoryformatversion") == 0)
540 repository_format_version = git_config_int(var, value);
541 else if (strcmp(var, "core.sharedrepository") == 0)
542 shared_repository = git_config_perm(var, value);
543 else if (strcmp(var, "core.bare") == 0) {
544 is_bare_repository_cfg = git_config_bool(var, value);
545 if (is_bare_repository_cfg == 1)
546 inside_work_tree = -1;
547 } else if (strcmp(var, "core.worktree") == 0) {
548 if (!value)
549 return config_error_nonbool(var);
550 free(git_work_tree_cfg);
551 git_work_tree_cfg = xstrdup(value);
552 inside_work_tree = -1;
553 }
554 return 0;
555}
556int check_repository_format(void)
558{
559 return check_repository_format_gently(NULL);
560}
561/*
563 * Returns the "prefix", a path to the current working directory
564 * relative to the work tree root, or NULL, if the current working
565 * directory is not a strict subdirectory of the work tree root. The
566 * prefix always ends with a '/' character.
567 */
568const char *setup_git_directory(void)
569{
570 const char *retval = setup_git_directory_gently(NULL);
571 /* If the work tree is not the default one, recompute prefix */
573 if (inside_work_tree < 0) {
574 static char buffer[PATH_MAX + 1];
575 char *rel;
576 if (retval && chdir(retval))
577 die_errno ("Could not jump back into original cwd");
578 rel = get_relative_cwd(buffer, PATH_MAX, get_git_work_tree());
579 if (rel && *rel && chdir(get_git_work_tree()))
580 die_errno ("Could not jump to working directory");
581 return rel && *rel ? strcat(rel, "/") : NULL;
582 }
583 return retval;
585}