1Commit Limiting 2~~~~~~~~~~~~~~~ 3 4Besides specifying a range of commits that should be listed using the 5special notations explained in the description, additional commit 6limiting may be applied. 7 8Using more options generally further limits the output (e.g. 9`--since=<date1>` limits to commits newer than `<date1>`, and using it 10with `--grep=<pattern>` further limits to commits whose log message 11has a line that matches `<pattern>`), unless otherwise noted. 12 13Note that these are applied before commit 14ordering and formatting options, such as `--reverse`. 15 16-<number>:: 17-n <number>:: 18--max-count=<number>:: 19 Limit the number of commits to output. 20 21--skip=<number>:: 22 Skip 'number' commits before starting to show the commit output. 23 24--since=<date>:: 25--after=<date>:: 26 Show commits more recent than a specific date. 27 28--until=<date>:: 29--before=<date>:: 30 Show commits older than a specific date. 31 32ifdef::git-rev-list[] 33--max-age=<timestamp>:: 34--min-age=<timestamp>:: 35 Limit the commits output to specified time range. 36endif::git-rev-list[] 37 38--author=<pattern>:: 39--committer=<pattern>:: 40 Limit the commits output to ones with author/committer 41 header lines that match the specified pattern (regular 42 expression). With more than one `--author=<pattern>`, 43 commits whose author matches any of the given patterns are 44 chosen (similarly for multiple `--committer=<pattern>`). 45 46--grep-reflog=<pattern>:: 47 Limit the commits output to ones with reflog entries that 48 match the specified pattern (regular expression). With 49 more than one `--grep-reflog`, commits whose reflog message 50 matches any of the given patterns are chosen. It is an 51 error to use this option unless `--walk-reflogs` is in use. 52 53--grep=<pattern>:: 54 Limit the commits output to ones with log message that 55 matches the specified pattern (regular expression). With 56 more than one `--grep=<pattern>`, commits whose message 57 matches any of the given patterns are chosen (but see 58 `--all-match`). 59ifndef::git-rev-list[] 60+ 61When `--show-notes` is in effect, the message from the notes is 62matched as if it were part of the log message. 63endif::git-rev-list[] 64 65--all-match:: 66 Limit the commits output to ones that match all given `--grep`, 67 instead of ones that match at least one. 68 69--invert-grep:: 70 Limit the commits output to ones with log message that do not 71 match the pattern specified with `--grep=<pattern>`. 72 73-i:: 74--regexp-ignore-case:: 75 Match the regular expression limiting patterns without regard to letter 76 case. 77 78--basic-regexp:: 79 Consider the limiting patterns to be basic regular expressions; 80 this is the default. 81 82-E:: 83--extended-regexp:: 84 Consider the limiting patterns to be extended regular expressions 85 instead of the default basic regular expressions. 86 87-F:: 88--fixed-strings:: 89 Consider the limiting patterns to be fixed strings (don't interpret 90 pattern as a regular expression). 91 92-P:: 93--perl-regexp:: 94 Consider the limiting patterns to be Perl-compatible regular 95 expressions. 96+ 97Support for these types of regular expressions is an optional 98compile-time dependency. If Git wasn't compiled with support for them 99providing this option will cause it to die. 100 101--remove-empty:: 102 Stop when a given path disappears from the tree. 103 104--merges:: 105 Print only merge commits. This is exactly the same as `--min-parents=2`. 106 107--no-merges:: 108 Do not print commits with more than one parent. This is 109 exactly the same as `--max-parents=1`. 110 111--min-parents=<number>:: 112--max-parents=<number>:: 113--no-min-parents:: 114--no-max-parents:: 115 Show only commits which have at least (or at most) that many parent 116 commits. In particular, `--max-parents=1` is the same as `--no-merges`, 117 `--min-parents=2` is the same as `--merges`. `--max-parents=0` 118 gives all root commits and `--min-parents=3` all octopus merges. 119+ 120`--no-min-parents` and `--no-max-parents` reset these limits (to no limit) 121again. Equivalent forms are `--min-parents=0` (any commit has 0 or more 122parents) and `--max-parents=-1` (negative numbers denote no upper limit). 123 124--first-parent:: 125 Follow only the first parent commit upon seeing a merge 126 commit. This option can give a better overview when 127 viewing the evolution of a particular topic branch, 128 because merges into a topic branch tend to be only about 129 adjusting to updated upstream from time to time, and 130 this option allows you to ignore the individual commits 131 brought in to your history by such a merge. Cannot be 132 combined with --bisect. 133 134--not:: 135 Reverses the meaning of the '{caret}' prefix (or lack thereof) 136 for all following revision specifiers, up to the next `--not`. 137 138--all:: 139 Pretend as if all the refs in `refs/`, along with `HEAD`, are 140 listed on the command line as '<commit>'. 141 142--branches[=<pattern>]:: 143 Pretend as if all the refs in `refs/heads` are listed 144 on the command line as '<commit>'. If '<pattern>' is given, limit 145 branches to ones matching given shell glob. If pattern lacks '?', 146 '{asterisk}', or '[', '/{asterisk}' at the end is implied. 147 148--tags[=<pattern>]:: 149 Pretend as if all the refs in `refs/tags` are listed 150 on the command line as '<commit>'. If '<pattern>' is given, limit 151 tags to ones matching given shell glob. If pattern lacks '?', '{asterisk}', 152 or '[', '/{asterisk}' at the end is implied. 153 154--remotes[=<pattern>]:: 155 Pretend as if all the refs in `refs/remotes` are listed 156 on the command line as '<commit>'. If '<pattern>' is given, limit 157 remote-tracking branches to ones matching given shell glob. 158 If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. 159 160--glob=<glob-pattern>:: 161 Pretend as if all the refs matching shell glob '<glob-pattern>' 162 are listed on the command line as '<commit>'. Leading 'refs/', 163 is automatically prepended if missing. If pattern lacks '?', '{asterisk}', 164 or '[', '/{asterisk}' at the end is implied. 165 166--exclude=<glob-pattern>:: 167 168 Do not include refs matching '<glob-pattern>' that the next `--all`, 169 `--branches`, `--tags`, `--remotes`, or `--glob` would otherwise 170 consider. Repetitions of this option accumulate exclusion patterns 171 up to the next `--all`, `--branches`, `--tags`, `--remotes`, or 172 `--glob` option (other options or arguments do not clear 173 accumulated patterns). 174+ 175The patterns given should not begin with `refs/heads`, `refs/tags`, or 176`refs/remotes` when applied to `--branches`, `--tags`, or `--remotes`, 177respectively, and they must begin with `refs/` when applied to `--glob` 178or `--all`. If a trailing '/{asterisk}' is intended, it must be given 179explicitly. 180 181--reflog:: 182 Pretend as if all objects mentioned by reflogs are listed on the 183 command line as `<commit>`. 184 185--alternate-refs:: 186 Pretend as if all objects mentioned as ref tips of alternate 187 repositories were listed on the command line. An alternate 188 repository is any repository whose object directory is specified 189 in `objects/info/alternates`. The set of included objects may 190 be modified by `core.alternateRefsCommand`, etc. See 191 linkgit:git-config[1]. 192 193--single-worktree:: 194 By default, all working trees will be examined by the 195 following options when there are more than one (see 196 linkgit:git-worktree[1]): `--all`, `--reflog` and 197 `--indexed-objects`. 198 This option forces them to examine the current working tree 199 only. 200 201--ignore-missing:: 202 Upon seeing an invalid object name in the input, pretend as if 203 the bad input was not given. 204 205ifndef::git-rev-list[] 206--bisect:: 207 Pretend as if the bad bisection ref `refs/bisect/bad` 208 was listed and as if it was followed by `--not` and the good 209 bisection refs `refs/bisect/good-*` on the command 210 line. Cannot be combined with --first-parent. 211endif::git-rev-list[] 212 213--stdin:: 214 In addition to the '<commit>' listed on the command 215 line, read them from the standard input. If a `--` separator is 216 seen, stop reading commits and start reading paths to limit the 217 result. 218 219ifdef::git-rev-list[] 220--quiet:: 221 Don't print anything to standard output. This form 222 is primarily meant to allow the caller to 223 test the exit status to see if a range of objects is fully 224 connected (or not). It is faster than redirecting stdout 225 to `/dev/null` as the output does not have to be formatted. 226endif::git-rev-list[] 227 228--cherry-mark:: 229 Like `--cherry-pick` (see below) but mark equivalent commits 230 with `=` rather than omitting them, and inequivalent ones with `+`. 231 232--cherry-pick:: 233 Omit any commit that introduces the same change as 234 another commit on the ``other side'' when the set of 235 commits are limited with symmetric difference. 236+ 237For example, if you have two branches, `A` and `B`, a usual way 238to list all commits on only one side of them is with 239`--left-right` (see the example below in the description of 240the `--left-right` option). However, it shows the commits that were 241cherry-picked from the other branch (for example, ``3rd on b'' may be 242cherry-picked from branch A). With this option, such pairs of commits are 243excluded from the output. 244 245--left-only:: 246--right-only:: 247 List only commits on the respective side of a symmetric difference, 248 i.e. only those which would be marked `<` resp. `>` by 249 `--left-right`. 250+ 251For example, `--cherry-pick --right-only A...B` omits those 252commits from `B` which are in `A` or are patch-equivalent to a commit in 253`A`. In other words, this lists the `+` commits from `git cherry A B`. 254More precisely, `--cherry-pick --right-only --no-merges` gives the exact 255list. 256 257--cherry:: 258 A synonym for `--right-only --cherry-mark --no-merges`; useful to 259 limit the output to the commits on our side and mark those that 260 have been applied to the other side of a forked history with 261 `git log --cherry upstream...mybranch`, similar to 262 `git cherry upstream mybranch`. 263 264-g:: 265--walk-reflogs:: 266 Instead of walking the commit ancestry chain, walk 267 reflog entries from the most recent one to older ones. 268 When this option is used you cannot specify commits to 269 exclude (that is, '{caret}commit', 'commit1..commit2', 270 and 'commit1\...commit2' notations cannot be used). 271+ 272With `--pretty` format other than `oneline` (for obvious reasons), 273this causes the output to have two extra lines of information 274taken from the reflog. The reflog designator in the output may be shown 275as `ref@{Nth}` (where `Nth` is the reverse-chronological index in the 276reflog) or as `ref@{timestamp}` (with the timestamp for that entry), 277depending on a few rules: 278+ 279-- 2801. If the starting point is specified as `ref@{Nth}`, show the index 281 format. 282+ 2832. If the starting point was specified as `ref@{now}`, show the 284 timestamp format. 285+ 2863. If neither was used, but `--date` was given on the command line, show 287 the timestamp in the format requested by `--date`. 288+ 2894. Otherwise, show the index format. 290-- 291+ 292Under `--pretty=oneline`, the commit message is 293prefixed with this information on the same line. 294This option cannot be combined with `--reverse`. 295See also linkgit:git-reflog[1]. 296 297--merge:: 298 After a failed merge, show refs that touch files having a 299 conflict and don't exist on all heads to merge. 300 301--boundary:: 302 Output excluded boundary commits. Boundary commits are 303 prefixed with `-`. 304 305ifdef::git-rev-list[] 306--use-bitmap-index:: 307 308 Try to speed up the traversal using the pack bitmap index (if 309 one is available). Note that when traversing with `--objects`, 310 trees and blobs will not have their associated path printed. 311 312--progress=<header>:: 313 Show progress reports on stderr as objects are considered. The 314 `<header>` text will be printed with each progress update. 315endif::git-rev-list[] 316 317History Simplification 318~~~~~~~~~~~~~~~~~~~~~~ 319 320Sometimes you are only interested in parts of the history, for example the 321commits modifying a particular <path>. But there are two parts of 322'History Simplification', one part is selecting the commits and the other 323is how to do it, as there are various strategies to simplify the history. 324 325The following options select the commits to be shown: 326 327<paths>:: 328 Commits modifying the given <paths> are selected. 329 330--simplify-by-decoration:: 331 Commits that are referred by some branch or tag are selected. 332 333Note that extra commits can be shown to give a meaningful history. 334 335The following options affect the way the simplification is performed: 336 337Default mode:: 338 Simplifies the history to the simplest history explaining the 339 final state of the tree. Simplest because it prunes some side 340 branches if the end result is the same (i.e. merging branches 341 with the same content) 342 343--full-history:: 344 Same as the default mode, but does not prune some history. 345 346--dense:: 347 Only the selected commits are shown, plus some to have a 348 meaningful history. 349 350--sparse:: 351 All commits in the simplified history are shown. 352 353--simplify-merges:: 354 Additional option to `--full-history` to remove some needless 355 merges from the resulting history, as there are no selected 356 commits contributing to this merge. 357 358--ancestry-path:: 359 When given a range of commits to display (e.g. 'commit1..commit2' 360 or 'commit2 {caret}commit1'), only display commits that exist 361 directly on the ancestry chain between the 'commit1' and 362 'commit2', i.e. commits that are both descendants of 'commit1', 363 and ancestors of 'commit2'. 364 365A more detailed explanation follows. 366 367Suppose you specified `foo` as the <paths>. We shall call commits 368that modify `foo` !TREESAME, and the rest TREESAME. (In a diff 369filtered for `foo`, they look different and equal, respectively.) 370 371In the following, we will always refer to the same example history to 372illustrate the differences between simplification settings. We assume 373that you are filtering for a file `foo` in this commit graph: 374----------------------------------------------------------------------- 375 .-A---M---N---O---P---Q 376 / / / / / / 377 I B C D E Y 378 \ / / / / / 379 `-------------' X 380----------------------------------------------------------------------- 381The horizontal line of history A---Q is taken to be the first parent of 382each merge. The commits are: 383 384* `I` is the initial commit, in which `foo` exists with contents 385 ``asdf'', and a file `quux` exists with contents ``quux''. Initial 386 commits are compared to an empty tree, so `I` is !TREESAME. 387 388* In `A`, `foo` contains just ``foo''. 389 390* `B` contains the same change as `A`. Its merge `M` is trivial and 391 hence TREESAME to all parents. 392 393* `C` does not change `foo`, but its merge `N` changes it to ``foobar'', 394 so it is not TREESAME to any parent. 395 396* `D` sets `foo` to ``baz''. Its merge `O` combines the strings from 397 `N` and `D` to ``foobarbaz''; i.e., it is not TREESAME to any parent. 398 399* `E` changes `quux` to ``xyzzy'', and its merge `P` combines the 400 strings to ``quux xyzzy''. `P` is TREESAME to `O`, but not to `E`. 401 402* `X` is an independent root commit that added a new file `side`, and `Y` 403 modified it. `Y` is TREESAME to `X`. Its merge `Q` added `side` to `P`, and 404 `Q` is TREESAME to `P`, but not to `Y`. 405 406`rev-list` walks backwards through history, including or excluding 407commits based on whether `--full-history` and/or parent rewriting 408(via `--parents` or `--children`) are used. The following settings 409are available. 410 411Default mode:: 412 Commits are included if they are not TREESAME to any parent 413 (though this can be changed, see `--sparse` below). If the 414 commit was a merge, and it was TREESAME to one parent, follow 415 only that parent. (Even if there are several TREESAME 416 parents, follow only one of them.) Otherwise, follow all 417 parents. 418+ 419This results in: 420+ 421----------------------------------------------------------------------- 422 .-A---N---O 423 / / / 424 I---------D 425----------------------------------------------------------------------- 426+ 427Note how the rule to only follow the TREESAME parent, if one is 428available, removed `B` from consideration entirely. `C` was 429considered via `N`, but is TREESAME. Root commits are compared to an 430empty tree, so `I` is !TREESAME. 431+ 432Parent/child relations are only visible with `--parents`, but that does 433not affect the commits selected in default mode, so we have shown the 434parent lines. 435 436--full-history without parent rewriting:: 437 This mode differs from the default in one point: always follow 438 all parents of a merge, even if it is TREESAME to one of them. 439 Even if more than one side of the merge has commits that are 440 included, this does not imply that the merge itself is! In 441 the example, we get 442+ 443----------------------------------------------------------------------- 444 I A B N D O P Q 445----------------------------------------------------------------------- 446+ 447`M` was excluded because it is TREESAME to both parents. `E`, 448`C` and `B` were all walked, but only `B` was !TREESAME, so the others 449do not appear. 450+ 451Note that without parent rewriting, it is not really possible to talk 452about the parent/child relationships between the commits, so we show 453them disconnected. 454 455--full-history with parent rewriting:: 456 Ordinary commits are only included if they are !TREESAME 457 (though this can be changed, see `--sparse` below). 458+ 459Merges are always included. However, their parent list is rewritten: 460Along each parent, prune away commits that are not included 461themselves. This results in 462+ 463----------------------------------------------------------------------- 464 .-A---M---N---O---P---Q 465 / / / / / 466 I B / D / 467 \ / / / / 468 `-------------' 469----------------------------------------------------------------------- 470+ 471Compare to `--full-history` without rewriting above. Note that `E` 472was pruned away because it is TREESAME, but the parent list of P was 473rewritten to contain `E`'s parent `I`. The same happened for `C` and 474`N`, and `X`, `Y` and `Q`. 475 476In addition to the above settings, you can change whether TREESAME 477affects inclusion: 478 479--dense:: 480 Commits that are walked are included if they are not TREESAME 481 to any parent. 482 483--sparse:: 484 All commits that are walked are included. 485+ 486Note that without `--full-history`, this still simplifies merges: if 487one of the parents is TREESAME, we follow only that one, so the other 488sides of the merge are never walked. 489 490--simplify-merges:: 491 First, build a history graph in the same way that 492 `--full-history` with parent rewriting does (see above). 493+ 494Then simplify each commit `C` to its replacement `C'` in the final 495history according to the following rules: 496+ 497-- 498* Set `C'` to `C`. 499+ 500* Replace each parent `P` of `C'` with its simplification `P'`. In 501 the process, drop parents that are ancestors of other parents or that are 502 root commits TREESAME to an empty tree, and remove duplicates, but take care 503 to never drop all parents that we are TREESAME to. 504+ 505* If after this parent rewriting, `C'` is a root or merge commit (has 506 zero or >1 parents), a boundary commit, or !TREESAME, it remains. 507 Otherwise, it is replaced with its only parent. 508-- 509+ 510The effect of this is best shown by way of comparing to 511`--full-history` with parent rewriting. The example turns into: 512+ 513----------------------------------------------------------------------- 514 .-A---M---N---O 515 / / / 516 I B D 517 \ / / 518 `---------' 519----------------------------------------------------------------------- 520+ 521Note the major differences in `N`, `P`, and `Q` over `--full-history`: 522+ 523-- 524* `N`'s parent list had `I` removed, because it is an ancestor of the 525 other parent `M`. Still, `N` remained because it is !TREESAME. 526+ 527* `P`'s parent list similarly had `I` removed. `P` was then 528 removed completely, because it had one parent and is TREESAME. 529+ 530* `Q`'s parent list had `Y` simplified to `X`. `X` was then removed, because it 531 was a TREESAME root. `Q` was then removed completely, because it had one 532 parent and is TREESAME. 533-- 534 535Finally, there is a fifth simplification mode available: 536 537--ancestry-path:: 538 Limit the displayed commits to those directly on the ancestry 539 chain between the ``from'' and ``to'' commits in the given commit 540 range. I.e. only display commits that are ancestor of the ``to'' 541 commit and descendants of the ``from'' commit. 542+ 543As an example use case, consider the following commit history: 544+ 545----------------------------------------------------------------------- 546 D---E-------F 547 / \ \ 548 B---C---G---H---I---J 549 / \ 550 A-------K---------------L--M 551----------------------------------------------------------------------- 552+ 553A regular 'D..M' computes the set of commits that are ancestors of `M`, 554but excludes the ones that are ancestors of `D`. This is useful to see 555what happened to the history leading to `M` since `D`, in the sense 556that ``what does `M` have that did not exist in `D`''. The result in this 557example would be all the commits, except `A` and `B` (and `D` itself, 558of course). 559+ 560When we want to find out what commits in `M` are contaminated with the 561bug introduced by `D` and need fixing, however, we might want to view 562only the subset of 'D..M' that are actually descendants of `D`, i.e. 563excluding `C` and `K`. This is exactly what the `--ancestry-path` 564option does. Applied to the 'D..M' range, it results in: 565+ 566----------------------------------------------------------------------- 567 E-------F 568 \ \ 569 G---H---I---J 570 \ 571 L--M 572----------------------------------------------------------------------- 573 574The `--simplify-by-decoration` option allows you to view only the 575big picture of the topology of the history, by omitting commits 576that are not referenced by tags. Commits are marked as !TREESAME 577(in other words, kept after history simplification rules described 578above) if (1) they are referenced by tags, or (2) they change the 579contents of the paths given on the command line. All other 580commits are marked as TREESAME (subject to be simplified away). 581 582ifdef::git-rev-list[] 583Bisection Helpers 584~~~~~~~~~~~~~~~~~ 585 586--bisect:: 587 Limit output to the one commit object which is roughly halfway between 588 included and excluded commits. Note that the bad bisection ref 589 `refs/bisect/bad` is added to the included commits (if it 590 exists) and the good bisection refs `refs/bisect/good-*` are 591 added to the excluded commits (if they exist). Thus, supposing there 592 are no refs in `refs/bisect/`, if 593+ 594----------------------------------------------------------------------- 595 $ git rev-list --bisect foo ^bar ^baz 596----------------------------------------------------------------------- 597+ 598outputs 'midpoint', the output of the two commands 599+ 600----------------------------------------------------------------------- 601 $ git rev-list foo ^midpoint 602 $ git rev-list midpoint ^bar ^baz 603----------------------------------------------------------------------- 604+ 605would be of roughly the same length. Finding the change which 606introduces a regression is thus reduced to a binary search: repeatedly 607generate and test new 'midpoint's until the commit chain is of length 608one. Cannot be combined with --first-parent. 609 610--bisect-vars:: 611 This calculates the same as `--bisect`, except that refs in 612 `refs/bisect/` are not used, and except that this outputs 613 text ready to be eval'ed by the shell. These lines will assign the 614 name of the midpoint revision to the variable `bisect_rev`, and the 615 expected number of commits to be tested after `bisect_rev` is tested 616 to `bisect_nr`, the expected number of commits to be tested if 617 `bisect_rev` turns out to be good to `bisect_good`, the expected 618 number of commits to be tested if `bisect_rev` turns out to be bad to 619 `bisect_bad`, and the number of commits we are bisecting right now to 620 `bisect_all`. 621 622--bisect-all:: 623 This outputs all the commit objects between the included and excluded 624 commits, ordered by their distance to the included and excluded 625 commits. Refs in `refs/bisect/` are not used. The farthest 626 from them is displayed first. (This is the only one displayed by 627 `--bisect`.) 628+ 629This is useful because it makes it easy to choose a good commit to 630test when you want to avoid to test some of them for some reason (they 631may not compile for example). 632+ 633This option can be used along with `--bisect-vars`, in this case, 634after all the sorted commit objects, there will be the same text as if 635`--bisect-vars` had been used alone. 636endif::git-rev-list[] 637 638 639Commit Ordering 640~~~~~~~~~~~~~~~ 641 642By default, the commits are shown in reverse chronological order. 643 644--date-order:: 645 Show no parents before all of its children are shown, but 646 otherwise show commits in the commit timestamp order. 647 648--author-date-order:: 649 Show no parents before all of its children are shown, but 650 otherwise show commits in the author timestamp order. 651 652--topo-order:: 653 Show no parents before all of its children are shown, and 654 avoid showing commits on multiple lines of history 655 intermixed. 656+ 657For example, in a commit history like this: 658+ 659---------------------------------------------------------------- 660 661 ---1----2----4----7 662 \ \ 663 3----5----6----8--- 664 665---------------------------------------------------------------- 666+ 667where the numbers denote the order of commit timestamps, `git 668rev-list` and friends with `--date-order` show the commits in the 669timestamp order: 8 7 6 5 4 3 2 1. 670+ 671With `--topo-order`, they would show 8 6 5 3 7 4 2 1 (or 8 7 4 2 6 5 6723 1); some older commits are shown before newer ones in order to 673avoid showing the commits from two parallel development track mixed 674together. 675 676--reverse:: 677 Output the commits chosen to be shown (see Commit Limiting 678 section above) in reverse order. Cannot be combined with 679 `--walk-reflogs`. 680 681Object Traversal 682~~~~~~~~~~~~~~~~ 683 684These options are mostly targeted for packing of Git repositories. 685 686ifdef::git-rev-list[] 687--objects:: 688 Print the object IDs of any object referenced by the listed 689 commits. `--objects foo ^bar` thus means ``send me 690 all object IDs which I need to download if I have the commit 691 object _bar_ but not _foo_''. 692 693--in-commit-order:: 694 Print tree and blob ids in order of the commits. The tree 695 and blob ids are printed after they are first referenced 696 by a commit. 697 698--objects-edge:: 699 Similar to `--objects`, but also print the IDs of excluded 700 commits prefixed with a ``-'' character. This is used by 701 linkgit:git-pack-objects[1] to build a ``thin'' pack, which records 702 objects in deltified form based on objects contained in these 703 excluded commits to reduce network traffic. 704 705--objects-edge-aggressive:: 706 Similar to `--objects-edge`, but it tries harder to find excluded 707 commits at the cost of increased time. This is used instead of 708 `--objects-edge` to build ``thin'' packs for shallow repositories. 709 710--indexed-objects:: 711 Pretend as if all trees and blobs used by the index are listed 712 on the command line. Note that you probably want to use 713 `--objects`, too. 714 715--unpacked:: 716 Only useful with `--objects`; print the object IDs that are not 717 in packs. 718 719--object-names:: 720 Only useful with `--objects`; print the names of the object IDs 721 that are found. This is the default behavior. 722 723--no-object-names:: 724 Only useful with `--objects`; does not print the names of the object 725 IDs that are found. This inverts `--object-names`. This flag allows 726 the output to be more easily parsed by commands such as 727 linkgit:git-cat-file[1]. 728 729--filter=<filter-spec>:: 730 Only useful with one of the `--objects*`; omits objects (usually 731 blobs) from the list of printed objects. The '<filter-spec>' 732 may be one of the following: 733+ 734The form '--filter=blob:none' omits all blobs. 735+ 736The form '--filter=blob:limit=<n>[kmg]' omits blobs larger than n bytes 737or units. n may be zero. The suffixes k, m, and g can be used to name 738units in KiB, MiB, or GiB. For example, 'blob:limit=1k' is the same 739as 'blob:limit=1024'. 740+ 741The form '--filter=sparse:oid=<blob-ish>' uses a sparse-checkout 742specification contained in the blob (or blob-expression) '<blob-ish>' 743to omit blobs that would not be not required for a sparse checkout on 744the requested refs. 745+ 746The form '--filter=tree:<depth>' omits all blobs and trees whose depth 747from the root tree is >= <depth> (minimum depth if an object is located 748at multiple depths in the commits traversed). <depth>=0 will not include 749any trees or blobs unless included explicitly in the command-line (or 750standard input when --stdin is used). <depth>=1 will include only the 751tree and blobs which are referenced directly by a commit reachable from 752<commit> or an explicitly-given object. <depth>=2 is like <depth>=1 753while also including trees and blobs one more level removed from an 754explicitly-given commit or tree. 755+ 756Note that the form '--filter=sparse:path=<path>' that wants to read 757from an arbitrary path on the filesystem has been dropped for security 758reasons. 759 760--no-filter:: 761 Turn off any previous `--filter=` argument. 762 763--filter-print-omitted:: 764 Only useful with `--filter=`; prints a list of the objects omitted 765 by the filter. Object IDs are prefixed with a ``~'' character. 766 767--missing=<missing-action>:: 768 A debug option to help with future "partial clone" development. 769 This option specifies how missing objects are handled. 770+ 771The form '--missing=error' requests that rev-list stop with an error if 772a missing object is encountered. This is the default action. 773+ 774The form '--missing=allow-any' will allow object traversal to continue 775if a missing object is encountered. Missing objects will silently be 776omitted from the results. 777+ 778The form '--missing=allow-promisor' is like 'allow-any', but will only 779allow object traversal to continue for EXPECTED promisor missing objects. 780Unexpected missing objects will raise an error. 781+ 782The form '--missing=print' is like 'allow-any', but will also print a 783list of the missing objects. Object IDs are prefixed with a ``?'' character. 784 785--exclude-promisor-objects:: 786 (For internal use only.) Prefilter object traversal at 787 promisor boundary. This is used with partial clone. This is 788 stronger than `--missing=allow-promisor` because it limits the 789 traversal, rather than just silencing errors about missing 790 objects. 791endif::git-rev-list[] 792 793--no-walk[=(sorted|unsorted)]:: 794 Only show the given commits, but do not traverse their ancestors. 795 This has no effect if a range is specified. If the argument 796 `unsorted` is given, the commits are shown in the order they were 797 given on the command line. Otherwise (if `sorted` or no argument 798 was given), the commits are shown in reverse chronological order 799 by commit time. 800 Cannot be combined with `--graph`. 801 802--do-walk:: 803 Overrides a previous `--no-walk`. 804 805Commit Formatting 806~~~~~~~~~~~~~~~~~ 807 808ifdef::git-rev-list[] 809Using these options, linkgit:git-rev-list[1] will act similar to the 810more specialized family of commit log tools: linkgit:git-log[1], 811linkgit:git-show[1], and linkgit:git-whatchanged[1] 812endif::git-rev-list[] 813 814include::pretty-options.txt[] 815 816--relative-date:: 817 Synonym for `--date=relative`. 818 819--date=<format>:: 820 Only takes effect for dates shown in human-readable format, such 821 as when using `--pretty`. `log.date` config variable sets a default 822 value for the log command's `--date` option. By default, dates 823 are shown in the original time zone (either committer's or 824 author's). If `-local` is appended to the format (e.g., 825 `iso-local`), the user's local time zone is used instead. 826+ 827-- 828`--date=relative` shows dates relative to the current time, 829e.g. ``2 hours ago''. The `-local` option has no effect for 830`--date=relative`. 831 832`--date=local` is an alias for `--date=default-local`. 833 834`--date=iso` (or `--date=iso8601`) shows timestamps in a ISO 8601-like format. 835The differences to the strict ISO 8601 format are: 836 837 - a space instead of the `T` date/time delimiter 838 - a space between time and time zone 839 - no colon between hours and minutes of the time zone 840 841`--date=iso-strict` (or `--date=iso8601-strict`) shows timestamps in strict 842ISO 8601 format. 843 844`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 845format, often found in email messages. 846 847`--date=short` shows only the date, but not the time, in `YYYY-MM-DD` format. 848 849`--date=raw` shows the date as seconds since the epoch (1970-01-01 85000:00:00 UTC), followed by a space, and then the timezone as an offset 851from UTC (a `+` or `-` with four digits; the first two are hours, and 852the second two are minutes). I.e., as if the timestamp were formatted 853with `strftime("%s %z")`). 854Note that the `-local` option does not affect the seconds-since-epoch 855value (which is always measured in UTC), but does switch the accompanying 856timezone value. 857 858`--date=human` shows the timezone if the timezone does not match the 859current time-zone, and doesn't print the whole date if that matches 860(ie skip printing year for dates that are "this year", but also skip 861the whole date itself if it's in the last few days and we can just say 862what weekday it was). For older dates the hour and minute is also 863omitted. 864 865`--date=unix` shows the date as a Unix epoch timestamp (seconds since 8661970). As with `--raw`, this is always in UTC and therefore `-local` 867has no effect. 868 869`--date=format:...` feeds the format `...` to your system `strftime`, 870except for %z and %Z, which are handled internally. 871Use `--date=format:%c` to show the date in your system locale's 872preferred format. See the `strftime` manual for a complete list of 873format placeholders. When using `-local`, the correct syntax is 874`--date=format-local:...`. 875 876`--date=default` is the default format, and is similar to 877`--date=rfc2822`, with a few exceptions: 878-- 879 - there is no comma after the day-of-week 880 881 - the time zone is omitted when the local time zone is used 882 883ifdef::git-rev-list[] 884--header:: 885 Print the contents of the commit in raw-format; each record is 886 separated with a NUL character. 887endif::git-rev-list[] 888 889--parents:: 890 Print also the parents of the commit (in the form "commit parent..."). 891 Also enables parent rewriting, see 'History Simplification' above. 892 893--children:: 894 Print also the children of the commit (in the form "commit child..."). 895 Also enables parent rewriting, see 'History Simplification' above. 896 897ifdef::git-rev-list[] 898--timestamp:: 899 Print the raw commit timestamp. 900endif::git-rev-list[] 901 902--left-right:: 903 Mark which side of a symmetric difference a commit is reachable from. 904 Commits from the left side are prefixed with `<` and those from 905 the right with `>`. If combined with `--boundary`, those 906 commits are prefixed with `-`. 907+ 908For example, if you have this topology: 909+ 910----------------------------------------------------------------------- 911 y---b---b branch B 912 / \ / 913 / . 914 / / \ 915 o---x---a---a branch A 916----------------------------------------------------------------------- 917+ 918you would get an output like this: 919+ 920----------------------------------------------------------------------- 921 $ git rev-list --left-right --boundary --pretty=oneline A...B 922 923 >bbbbbbb... 3rd on b 924 >bbbbbbb... 2nd on b 925 <aaaaaaa... 3rd on a 926 <aaaaaaa... 2nd on a 927 -yyyyyyy... 1st on b 928 -xxxxxxx... 1st on a 929----------------------------------------------------------------------- 930 931--graph:: 932 Draw a text-based graphical representation of the commit history 933 on the left hand side of the output. This may cause extra lines 934 to be printed in between commits, in order for the graph history 935 to be drawn properly. 936 Cannot be combined with `--no-walk`. 937+ 938This enables parent rewriting, see 'History Simplification' above. 939+ 940This implies the `--topo-order` option by default, but the 941`--date-order` option may also be specified. 942 943--show-linear-break[=<barrier>]:: 944 When --graph is not used, all history branches are flattened 945 which can make it hard to see that the two consecutive commits 946 do not belong to a linear branch. This option puts a barrier 947 in between them in that case. If `<barrier>` is specified, it 948 is the string that will be shown instead of the default one. 949 950ifdef::git-rev-list[] 951--count:: 952 Print a number stating how many commits would have been 953 listed, and suppress all other output. When used together 954 with `--left-right`, instead print the counts for left and 955 right commits, separated by a tab. When used together with 956 `--cherry-mark`, omit patch equivalent commits from these 957 counts and print the count for equivalent commits separated 958 by a tab. 959endif::git-rev-list[] 960 961ifndef::git-rev-list[] 962Diff Formatting 963~~~~~~~~~~~~~~~ 964 965Listed below are options that control the formatting of diff output. 966Some of them are specific to linkgit:git-rev-list[1], however other diff 967options may be given. See linkgit:git-diff-files[1] for more options. 968 969-c:: 970 With this option, diff output for a merge commit 971 shows the differences from each of the parents to the merge result 972 simultaneously instead of showing pairwise diff between a parent 973 and the result one at a time. Furthermore, it lists only files 974 which were modified from all parents. 975 976--cc:: 977 This flag implies the `-c` option and further compresses the 978 patch output by omitting uninteresting hunks whose contents in 979 the parents have only two variants and the merge result picks 980 one of them without modification. 981 982--combined-all-paths:: 983 This flag causes combined diffs (used for merge commits) to 984 list the name of the file from all parents. It thus only has 985 effect when -c or --cc are specified, and is likely only 986 useful if filename changes are detected (i.e. when either 987 rename or copy detection have been requested). 988 989-m:: 990 This flag makes the merge commits show the full diff like 991 regular commits; for each merge parent, a separate log entry 992 and diff is generated. An exception is that only diff against 993 the first parent is shown when `--first-parent` option is given; 994 in that case, the output represents the changes the merge 995 brought _into_ the then-current branch. 996 997-r:: 998 Show recursive diffs. 9991000-t::1001 Show the tree objects in the diff output. This implies `-r`.1002endif::git-rev-list[]