1// Please don't remove this comment as asciidoc behaves badly when 2// the first non-empty line is ifdef/ifndef. The symptom is that 3// without this comment the <git-diff-core> attribute conditionally 4// defined below ends up being defined unconditionally. 5// Last checked with asciidoc 7.0.2. 6 7ifndef::git-format-patch[] 8ifndef::git-diff[] 9ifndef::git-log[] 10:git-diff-core: 1 11endif::git-log[] 12endif::git-diff[] 13endif::git-format-patch[] 14 15ifdef::git-format-patch[] 16-p:: 17--no-stat:: 18 Generate plain patches without any diffstats. 19endif::git-format-patch[] 20 21ifndef::git-format-patch[] 22-p:: 23-u:: 24--patch:: 25 Generate patch (see section on generating patches). 26 {git-diff? This is the default.} 27endif::git-format-patch[] 28 29-U<n>:: 30--unified=<n>:: 31 Generate diffs with <n> lines of context instead of 32 the usual three. 33ifndef::git-format-patch[] 34 Implies `-p`. 35endif::git-format-patch[] 36 37ifndef::git-format-patch[] 38--raw:: 39 Generate the raw format. 40 {git-diff-core? This is the default.} 41endif::git-format-patch[] 42 43ifndef::git-format-patch[] 44--patch-with-raw:: 45 Synonym for `-p --raw`. 46endif::git-format-patch[] 47 48--minimal:: 49 Spend extra time to make sure the smallest possible 50 diff is produced. 51 52--patience:: 53 Generate a diff using the "patience diff" algorithm. 54 55--stat[=<width>[,<name-width>[,<count>]]]:: 56 Generate a diffstat. You can override the default 57 output width for 80-column terminal by `--stat=<width>`. 58 The width of the filename part can be controlled by 59 giving another width to it separated by a comma. 60 By giving a third parameter `<count>`, you can limit the 61 output to the first `<count>` lines, followed by 62 `...` if there are more. 63+ 64These parameters can also be set individually with `--stat-width=<width>`, 65`--stat-name-width=<name-width>` and `--stat-count=<count>`. 66 67--numstat:: 68 Similar to `\--stat`, but shows number of added and 69 deleted lines in decimal notation and pathname without 70 abbreviation, to make it more machine friendly. For 71 binary files, outputs two `-` instead of saying 72 `0 0`. 73 74--shortstat:: 75 Output only the last line of the `--stat` format containing total 76 number of modified files, as well as number of added and deleted 77 lines. 78 79--dirstat[=<param1,param2,...>]:: 80 Output the distribution of relative amount of changes for each 81 sub-directory. The behavior of `--dirstat` can be customized by 82 passing it a comma separated list of parameters. 83 The defaults are controlled by the `diff.dirstat` configuration 84 variable (see linkgit:git-config[1]). 85 The following parameters are available: 86+ 87-- 88`changes`;; 89 Compute the dirstat numbers by counting the lines that have been 90 removed from the source, or added to the destination. This ignores 91 the amount of pure code movements within a file. In other words, 92 rearranging lines in a file is not counted as much as other changes. 93 This is the default behavior when no parameter is given. 94`lines`;; 95 Compute the dirstat numbers by doing the regular line-based diff 96 analysis, and summing the removed/added line counts. (For binary 97 files, count 64-byte chunks instead, since binary files have no 98 natural concept of lines). This is a more expensive `--dirstat` 99 behavior than the `changes` behavior, but it does count rearranged 100 lines within a file as much as other changes. The resulting output 101 is consistent with what you get from the other `--*stat` options. 102`files`;; 103 Compute the dirstat numbers by counting the number of files changed. 104 Each changed file counts equally in the dirstat analysis. This is 105 the computationally cheapest `--dirstat` behavior, since it does 106 not have to look at the file contents at all. 107`cumulative`;; 108 Count changes in a child directory for the parent directory as well. 109 Note that when using `cumulative`, the sum of the percentages 110 reported may exceed 100%. The default (non-cumulative) behavior can 111 be specified with the `noncumulative` parameter. 112<limit>;; 113 An integer parameter specifies a cut-off percent (3% by default). 114 Directories contributing less than this percentage of the changes 115 are not shown in the output. 116-- 117+ 118Example: The following will count changed files, while ignoring 119directories with less than 10% of the total amount of changed files, 120and accumulating child directory counts in the parent directories: 121`--dirstat=files,10,cumulative`. 122 123--summary:: 124 Output a condensed summary of extended header information 125 such as creations, renames and mode changes. 126 127ifndef::git-format-patch[] 128--patch-with-stat:: 129 Synonym for `-p --stat`. 130endif::git-format-patch[] 131 132ifndef::git-format-patch[] 133 134-z:: 135ifdef::git-log[] 136 Separate the commits with NULs instead of with new newlines. 137+ 138Also, when `--raw` or `--numstat` has been given, do not munge 139pathnames and use NULs as output field terminators. 140endif::git-log[] 141ifndef::git-log[] 142 When `--raw`, `--numstat`, `--name-only` or `--name-status` has been 143 given, do not munge pathnames and use NULs as output field terminators. 144endif::git-log[] 145+ 146Without this option, each pathname output will have TAB, LF, double quotes, 147and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, 148respectively, and the pathname will be enclosed in double quotes if 149any of those replacements occurred. 150 151--name-only:: 152 Show only names of changed files. 153 154--name-status:: 155 Show only names and status of changed files. See the description 156 of the `--diff-filter` option on what the status letters mean. 157 158--submodule[=<format>]:: 159 Chose the output format for submodule differences. <format> can be one of 160 'short' and 'log'. 'short' just shows pairs of commit names, this format 161 is used when this option is not given. 'log' is the default value for this 162 option and lists the commits in that commit range like the 'summary' 163 option of linkgit:git-submodule[1] does. 164 165--color[=<when>]:: 166 Show colored diff. 167 The value must be `always` (the default for `<when>`), `never`, or `auto`. 168 The default value is `never`. 169ifdef::git-diff[] 170 It can be changed by the `color.ui` and `color.diff` 171 configuration settings. 172endif::git-diff[] 173 174--no-color:: 175 Turn off colored diff. 176ifdef::git-diff[] 177 This can be used to override configuration settings. 178endif::git-diff[] 179 It is the same as `--color=never`. 180 181--word-diff[=<mode>]:: 182 Show a word diff, using the <mode> to delimit changed words. 183 By default, words are delimited by whitespace; see 184 `--word-diff-regex` below. The <mode> defaults to 'plain', and 185 must be one of: 186+ 187-- 188color:: 189 Highlight changed words using only colors. Implies `--color`. 190plain:: 191 Show words as `[-removed-]` and `{+added+}`. Makes no 192 attempts to escape the delimiters if they appear in the input, 193 so the output may be ambiguous. 194porcelain:: 195 Use a special line-based format intended for script 196 consumption. Added/removed/unchanged runs are printed in the 197 usual unified diff format, starting with a `+`/`-`/` ` 198 character at the beginning of the line and extending to the 199 end of the line. Newlines in the input are represented by a 200 tilde `~` on a line of its own. 201none:: 202 Disable word diff again. 203-- 204+ 205Note that despite the name of the first mode, color is used to 206highlight the changed parts in all modes if enabled. 207 208--word-diff-regex=<regex>:: 209 Use <regex> to decide what a word is, instead of considering 210 runs of non-whitespace to be a word. Also implies 211 `--word-diff` unless it was already enabled. 212+ 213Every non-overlapping match of the 214<regex> is considered a word. Anything between these matches is 215considered whitespace and ignored(!) for the purposes of finding 216differences. You may want to append `|[^[:space:]]` to your regular 217expression to make sure that it matches all non-whitespace characters. 218A match that contains a newline is silently truncated(!) at the 219newline. 220+ 221The regex can also be set via a diff driver or configuration option, see 222linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly 223overrides any diff driver or configuration setting. Diff drivers 224override configuration settings. 225 226--color-words[=<regex>]:: 227 Equivalent to `--word-diff=color` plus (if a regex was 228 specified) `--word-diff-regex=<regex>`. 229endif::git-format-patch[] 230 231--no-renames:: 232 Turn off rename detection, even when the configuration 233 file gives the default to do so. 234 235ifndef::git-format-patch[] 236--check:: 237 Warn if changes introduce whitespace errors. What are 238 considered whitespace errors is controlled by `core.whitespace` 239 configuration. By default, trailing whitespaces (including 240 lines that solely consist of whitespaces) and a space character 241 that is immediately followed by a tab character inside the 242 initial indent of the line are considered whitespace errors. 243 Exits with non-zero status if problems are found. Not compatible 244 with --exit-code. 245endif::git-format-patch[] 246 247--full-index:: 248 Instead of the first handful of characters, show the full 249 pre- and post-image blob object names on the "index" 250 line when generating patch format output. 251 252--binary:: 253 In addition to `--full-index`, output a binary diff that 254 can be applied with `git-apply`. 255 256--abbrev[=<n>]:: 257 Instead of showing the full 40-byte hexadecimal object 258 name in diff-raw format output and diff-tree header 259 lines, show only a partial prefix. This is 260 independent of the `--full-index` option above, which controls 261 the diff-patch output format. Non default number of 262 digits can be specified with `--abbrev=<n>`. 263 264-B[<n>][/<m>]:: 265--break-rewrites[=[<n>][/<m>]]:: 266 Break complete rewrite changes into pairs of delete and 267 create. This serves two purposes: 268+ 269It affects the way a change that amounts to a total rewrite of a file 270not as a series of deletion and insertion mixed together with a very 271few lines that happen to match textually as the context, but as a 272single deletion of everything old followed by a single insertion of 273everything new, and the number `m` controls this aspect of the -B 274option (defaults to 60%). `-B/70%` specifies that less than 30% of the 275original should remain in the result for git to consider it a total 276rewrite (i.e. otherwise the resulting patch will be a series of 277deletion and insertion mixed together with context lines). 278+ 279When used with -M, a totally-rewritten file is also considered as the 280source of a rename (usually -M only considers a file that disappeared 281as the source of a rename), and the number `n` controls this aspect of 282the -B option (defaults to 50%). `-B20%` specifies that a change with 283addition and deletion compared to 20% or more of the file's size are 284eligible for being picked up as a possible source of a rename to 285another file. 286 287-M[<n>]:: 288--find-renames[=<n>]:: 289ifndef::git-log[] 290 Detect renames. 291endif::git-log[] 292ifdef::git-log[] 293 If generating diffs, detect and report renames for each commit. 294 For following files across renames while traversing history, see 295 `--follow`. 296endif::git-log[] 297 If `n` is specified, it is a threshold on the similarity 298 index (i.e. amount of addition/deletions compared to the 299 file's size). For example, `-M90%` means git should consider a 300 delete/add pair to be a rename if more than 90% of the file 301 hasn't changed. 302 303-C[<n>]:: 304--find-copies[=<n>]:: 305 Detect copies as well as renames. See also `--find-copies-harder`. 306 If `n` is specified, it has the same meaning as for `-M<n>`. 307 308--find-copies-harder:: 309 For performance reasons, by default, `-C` option finds copies only 310 if the original file of the copy was modified in the same 311 changeset. This flag makes the command 312 inspect unmodified files as candidates for the source of 313 copy. This is a very expensive operation for large 314 projects, so use it with caution. Giving more than one 315 `-C` option has the same effect. 316 317-D:: 318--irreversible-delete:: 319 Omit the preimage for deletes, i.e. print only the header but not 320 the diff between the preimage and `/dev/null`. The resulting patch 321 is not meant to be applied with `patch` nor `git apply`; this is 322 solely for people who want to just concentrate on reviewing the 323 text after the change. In addition, the output obviously lack 324 enough information to apply such a patch in reverse, even manually, 325 hence the name of the option. 326+ 327When used together with `-B`, omit also the preimage in the deletion part 328of a delete/create pair. 329 330-l<num>:: 331 The `-M` and `-C` options require O(n^2) processing time where n 332 is the number of potential rename/copy targets. This 333 option prevents rename/copy detection from running if 334 the number of rename/copy targets exceeds the specified 335 number. 336 337ifndef::git-format-patch[] 338--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: 339 Select only files that are Added (`A`), Copied (`C`), 340 Deleted (`D`), Modified (`M`), Renamed (`R`), have their 341 type (i.e. regular file, symlink, submodule, ...) changed (`T`), 342 are Unmerged (`U`), are 343 Unknown (`X`), or have had their pairing Broken (`B`). 344 Any combination of the filter characters (including none) can be used. 345 When `*` (All-or-none) is added to the combination, all 346 paths are selected if there is any file that matches 347 other criteria in the comparison; if there is no file 348 that matches other criteria, nothing is selected. 349 350-S<string>:: 351 Look for differences that introduce or remove an instance of 352 <string>. Note that this is different than the string simply 353 appearing in diff output; see the 'pickaxe' entry in 354 linkgit:gitdiffcore[7] for more details. 355 356-G<regex>:: 357 Look for differences whose added or removed line matches 358 the given <regex>. 359 360--pickaxe-all:: 361 When `-S` or `-G` finds a change, show all the changes in that 362 changeset, not just the files that contain the change 363 in <string>. 364 365--pickaxe-regex:: 366 Make the <string> not a plain string but an extended POSIX 367 regex to match. 368endif::git-format-patch[] 369 370-O<orderfile>:: 371 Output the patch in the order specified in the 372 <orderfile>, which has one shell glob pattern per line. 373 374ifndef::git-format-patch[] 375-R:: 376 Swap two inputs; that is, show differences from index or 377 on-disk file to tree contents. 378 379--relative[=<path>]:: 380 When run from a subdirectory of the project, it can be 381 told to exclude changes outside the directory and show 382 pathnames relative to it with this option. When you are 383 not in a subdirectory (e.g. in a bare repository), you 384 can name which subdirectory to make the output relative 385 to by giving a <path> as an argument. 386endif::git-format-patch[] 387 388-a:: 389--text:: 390 Treat all files as text. 391 392--ignore-space-at-eol:: 393 Ignore changes in whitespace at EOL. 394 395-b:: 396--ignore-space-change:: 397 Ignore changes in amount of whitespace. This ignores whitespace 398 at line end, and considers all other sequences of one or 399 more whitespace characters to be equivalent. 400 401-w:: 402--ignore-all-space:: 403 Ignore whitespace when comparing lines. This ignores 404 differences even if one line has whitespace where the other 405 line has none. 406 407--inter-hunk-context=<lines>:: 408 Show the context between diff hunks, up to the specified number 409 of lines, thereby fusing hunks that are close to each other. 410 411-W:: 412--function-context:: 413 Show whole surrounding functions of changes. 414 415ifndef::git-format-patch[] 416--exit-code:: 417 Make the program exit with codes similar to diff(1). 418 That is, it exits with 1 if there were differences and 419 0 means no differences. 420 421--quiet:: 422 Disable all output of the program. Implies `--exit-code`. 423endif::git-format-patch[] 424 425--ext-diff:: 426 Allow an external diff helper to be executed. If you set an 427 external diff driver with linkgit:gitattributes[5], you need 428 to use this option with linkgit:git-log[1] and friends. 429 430--no-ext-diff:: 431 Disallow external diff drivers. 432 433--textconv:: 434--no-textconv:: 435 Allow (or disallow) external text conversion filters to be run 436 when comparing binary files. See linkgit:gitattributes[5] for 437 details. Because textconv filters are typically a one-way 438 conversion, the resulting diff is suitable for human 439 consumption, but cannot be applied. For this reason, textconv 440 filters are enabled by default only for linkgit:git-diff[1] and 441 linkgit:git-log[1], but not for linkgit:git-format-patch[1] or 442 diff plumbing commands. 443 444--ignore-submodules[=<when>]:: 445 Ignore changes to submodules in the diff generation. <when> can be 446 either "none", "untracked", "dirty" or "all", which is the default 447 Using "none" will consider the submodule modified when it either contains 448 untracked or modified files or its HEAD differs from the commit recorded 449 in the superproject and can be used to override any settings of the 450 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When 451 "untracked" is used submodules are not considered dirty when they only 452 contain untracked content (but they are still scanned for modified 453 content). Using "dirty" ignores all changes to the work tree of submodules, 454 only changes to the commits stored in the superproject are shown (this was 455 the behavior until 1.7.0). Using "all" hides all changes to submodules. 456 457--src-prefix=<prefix>:: 458 Show the given source prefix instead of "a/". 459 460--dst-prefix=<prefix>:: 461 Show the given destination prefix instead of "b/". 462 463--no-prefix:: 464 Do not show any source or destination prefix. 465 466For more detailed explanation on these common options, see also 467linkgit:gitdiffcore[7].