1Commit Limiting 2~~~~~~~~~~~~~~~ 3 4Besides specifying a range of commits that should be listed using the 5special notations explained in the description, additional commit 6limiting may be applied. 7 8Using more options generally further limits the output (e.g. 9`--since=<date1>` limits to commits newer than `<date1>`, and using it 10with `--grep=<pattern>` further limits to commits whose log message 11has a line that matches `<pattern>`), unless otherwise noted. 12 13Note that these are applied before commit 14ordering and formatting options, such as `--reverse`. 15 16-- 17 18-<number>:: 19-n <number>:: 20--max-count=<number>:: 21 Limit the number of commits to output. 22 23--skip=<number>:: 24 Skip 'number' commits before starting to show the commit output. 25 26--since=<date>:: 27--after=<date>:: 28 Show commits more recent than a specific date. 29 30--until=<date>:: 31--before=<date>:: 32 Show commits older than a specific date. 33 34ifdef::git-rev-list[] 35--max-age=<timestamp>:: 36--min-age=<timestamp>:: 37 Limit the commits output to specified time range. 38endif::git-rev-list[] 39 40--author=<pattern>:: 41--committer=<pattern>:: 42 Limit the commits output to ones with author/committer 43 header lines that match the specified pattern (regular 44 expression). With more than one `--author=<pattern>`, 45 commits whose author matches any of the given patterns are 46 chosen (similarly for multiple `--committer=<pattern>`). 47 48--grep-reflog=<pattern>:: 49 Limit the commits output to ones with reflog entries that 50 match the specified pattern (regular expression). With 51 more than one `--grep-reflog`, commits whose reflog message 52 matches any of the given patterns are chosen. It is an 53 error to use this option unless `--walk-reflogs` is in use. 54 55--grep=<pattern>:: 56 Limit the commits output to ones with log message that 57 matches the specified pattern (regular expression). With 58 more than one `--grep=<pattern>`, commits whose message 59 matches any of the given patterns are chosen (but see 60 `--all-match`). 61+ 62When `--show-notes` is in effect, the message from the notes as 63if it is part of the log message. 64 65--all-match:: 66 Limit the commits output to ones that match all given `--grep`, 67 instead of ones that match at least one. 68 69-i:: 70--regexp-ignore-case:: 71 Match the regular expression limiting patterns without regard to letter 72 case. 73 74--basic-regexp:: 75 Consider the limiting patterns to be basic regular expressions; 76 this is the default. 77 78-E:: 79--extended-regexp:: 80 Consider the limiting patterns to be extended regular expressions 81 instead of the default basic regular expressions. 82 83-F:: 84--fixed-strings:: 85 Consider the limiting patterns to be fixed strings (don't interpret 86 pattern as a regular expression). 87 88--perl-regexp:: 89 Consider the limiting patterns to be Perl-compatible regular expressions. 90 Requires libpcre to be compiled in. 91 92--remove-empty:: 93 Stop when a given path disappears from the tree. 94 95--merges:: 96 Print only merge commits. This is exactly the same as `--min-parents=2`. 97 98--no-merges:: 99 Do not print commits with more than one parent. This is 100 exactly the same as `--max-parents=1`. 101 102--min-parents=<number>:: 103--max-parents=<number>:: 104--no-min-parents:: 105--no-max-parents:: 106 Show only commits which have at least (or at most) that many parent 107 commits. In particular, `--max-parents=1` is the same as `--no-merges`, 108 `--min-parents=2` is the same as `--merges`. `--max-parents=0` 109 gives all root commits and `--min-parents=3` all octopus merges. 110+ 111`--no-min-parents` and `--no-max-parents` reset these limits (to no limit) 112again. Equivalent forms are `--min-parents=0` (any commit has 0 or more 113parents) and `--max-parents=-1` (negative numbers denote no upper limit). 114 115--first-parent:: 116 Follow only the first parent commit upon seeing a merge 117 commit. This option can give a better overview when 118 viewing the evolution of a particular topic branch, 119 because merges into a topic branch tend to be only about 120 adjusting to updated upstream from time to time, and 121 this option allows you to ignore the individual commits 122 brought in to your history by such a merge. 123 124--not:: 125 Reverses the meaning of the '{caret}' prefix (or lack thereof) 126 for all following revision specifiers, up to the next `--not`. 127 128--all:: 129 Pretend as if all the refs in `refs/` are listed on the 130 command line as '<commit>'. 131 132--branches[=<pattern>]:: 133 Pretend as if all the refs in `refs/heads` are listed 134 on the command line as '<commit>'. If '<pattern>' is given, limit 135 branches to ones matching given shell glob. If pattern lacks '?', 136 '{asterisk}', or '[', '/{asterisk}' at the end is implied. 137 138--tags[=<pattern>]:: 139 Pretend as if all the refs in `refs/tags` are listed 140 on the command line as '<commit>'. If '<pattern>' is given, limit 141 tags to ones matching given shell glob. If pattern lacks '?', '{asterisk}', 142 or '[', '/{asterisk}' at the end is implied. 143 144--remotes[=<pattern>]:: 145 Pretend as if all the refs in `refs/remotes` are listed 146 on the command line as '<commit>'. If '<pattern>' is given, limit 147 remote-tracking branches to ones matching given shell glob. 148 If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. 149 150--glob=<glob-pattern>:: 151 Pretend as if all the refs matching shell glob '<glob-pattern>' 152 are listed on the command line as '<commit>'. Leading 'refs/', 153 is automatically prepended if missing. If pattern lacks '?', '{asterisk}', 154 or '[', '/{asterisk}' at the end is implied. 155 156--exclude=<glob-pattern>:: 157 158 Do not include refs matching '<glob-pattern>' that the next `--all`, 159 `--branches`, `--tags`, `--remotes`, or `--glob` would otherwise 160 consider. Repetitions of this option accumulate exclusion patterns 161 up to the next `--all`, `--branches`, `--tags`, `--remotes`, or 162 `--glob` option (other options or arguments do not clear 163 accumlated patterns). 164+ 165The patterns given should not begin with `refs/heads`, `refs/tags`, or 166`refs/remotes` when applied to `--branches`, `--tags`, or `--remotes`, 167respectively, and they must begin with `refs/` when applied to `--glob` 168or `--all`. If a trailing '/{asterisk}' is intended, it must be given 169explicitly. 170 171--ignore-missing:: 172 Upon seeing an invalid object name in the input, pretend as if 173 the bad input was not given. 174 175ifndef::git-rev-list[] 176--bisect:: 177 Pretend as if the bad bisection ref `refs/bisect/bad` 178 was listed and as if it was followed by `--not` and the good 179 bisection refs `refs/bisect/good-*` on the command 180 line. 181endif::git-rev-list[] 182 183--stdin:: 184 In addition to the '<commit>' listed on the command 185 line, read them from the standard input. If a '--' separator is 186 seen, stop reading commits and start reading paths to limit the 187 result. 188 189ifdef::git-rev-list[] 190--quiet:: 191 Don't print anything to standard output. This form 192 is primarily meant to allow the caller to 193 test the exit status to see if a range of objects is fully 194 connected (or not). It is faster than redirecting stdout 195 to `/dev/null` as the output does not have to be formatted. 196endif::git-rev-list[] 197 198--cherry-mark:: 199 Like `--cherry-pick` (see below) but mark equivalent commits 200 with `=` rather than omitting them, and inequivalent ones with `+`. 201 202--cherry-pick:: 203 Omit any commit that introduces the same change as 204 another commit on the ``other side'' when the set of 205 commits are limited with symmetric difference. 206+ 207For example, if you have two branches, `A` and `B`, a usual way 208to list all commits on only one side of them is with 209`--left-right` (see the example below in the description of 210the `--left-right` option). However, it shows the commits that were 211cherry-picked from the other branch (for example, ``3rd on b'' may be 212cherry-picked from branch A). With this option, such pairs of commits are 213excluded from the output. 214 215--left-only:: 216--right-only:: 217 List only commits on the respective side of a symmetric range, 218 i.e. only those which would be marked `<` resp. `>` by 219 `--left-right`. 220+ 221For example, `--cherry-pick --right-only A...B` omits those 222commits from `B` which are in `A` or are patch-equivalent to a commit in 223`A`. In other words, this lists the `+` commits from `git cherry A B`. 224More precisely, `--cherry-pick --right-only --no-merges` gives the exact 225list. 226 227--cherry:: 228 A synonym for `--right-only --cherry-mark --no-merges`; useful to 229 limit the output to the commits on our side and mark those that 230 have been applied to the other side of a forked history with 231 `git log --cherry upstream...mybranch`, similar to 232 `git cherry upstream mybranch`. 233 234-g:: 235--walk-reflogs:: 236 Instead of walking the commit ancestry chain, walk 237 reflog entries from the most recent one to older ones. 238 When this option is used you cannot specify commits to 239 exclude (that is, '{caret}commit', 'commit1..commit2', 240 and 'commit1\...commit2' notations cannot be used). 241+ 242With `--pretty` format other than `oneline` (for obvious reasons), 243this causes the output to have two extra lines of information 244taken from the reflog. By default, 'commit@\{Nth}' notation is 245used in the output. When the starting commit is specified as 246'commit@\{now}', output also uses 'commit@\{timestamp}' notation 247instead. Under `--pretty=oneline`, the commit message is 248prefixed with this information on the same line. 249This option cannot be combined with `--reverse`. 250See also linkgit:git-reflog[1]. 251 252--merge:: 253 After a failed merge, show refs that touch files having a 254 conflict and don't exist on all heads to merge. 255 256--boundary:: 257 Output excluded boundary commits. Boundary commits are 258 prefixed with `-`. 259 260ifdef::git-rev-list[] 261--use-bitmap-index:: 262 263 Try to speed up the traversal using the pack bitmap index (if 264 one is available). Note that when traversing with `--objects`, 265 trees and blobs will not have their associated path printed. 266endif::git-rev-list[] 267 268-- 269 270History Simplification 271~~~~~~~~~~~~~~~~~~~~~~ 272 273Sometimes you are only interested in parts of the history, for example the 274commits modifying a particular <path>. But there are two parts of 275'History Simplification', one part is selecting the commits and the other 276is how to do it, as there are various strategies to simplify the history. 277 278The following options select the commits to be shown: 279 280<paths>:: 281 Commits modifying the given <paths> are selected. 282 283--simplify-by-decoration:: 284 Commits that are referred by some branch or tag are selected. 285 286Note that extra commits can be shown to give a meaningful history. 287 288The following options affect the way the simplification is performed: 289 290Default mode:: 291 Simplifies the history to the simplest history explaining the 292 final state of the tree. Simplest because it prunes some side 293 branches if the end result is the same (i.e. merging branches 294 with the same content) 295 296--full-history:: 297 Same as the default mode, but does not prune some history. 298 299--dense:: 300 Only the selected commits are shown, plus some to have a 301 meaningful history. 302 303--sparse:: 304 All commits in the simplified history are shown. 305 306--simplify-merges:: 307 Additional option to `--full-history` to remove some needless 308 merges from the resulting history, as there are no selected 309 commits contributing to this merge. 310 311--ancestry-path:: 312 When given a range of commits to display (e.g. 'commit1..commit2' 313 or 'commit2 {caret}commit1'), only display commits that exist 314 directly on the ancestry chain between the 'commit1' and 315 'commit2', i.e. commits that are both descendants of 'commit1', 316 and ancestors of 'commit2'. 317 318A more detailed explanation follows. 319 320Suppose you specified `foo` as the <paths>. We shall call commits 321that modify `foo` !TREESAME, and the rest TREESAME. (In a diff 322filtered for `foo`, they look different and equal, respectively.) 323 324In the following, we will always refer to the same example history to 325illustrate the differences between simplification settings. We assume 326that you are filtering for a file `foo` in this commit graph: 327----------------------------------------------------------------------- 328 .-A---M---N---O---P---Q 329 / / / / / / 330 I B C D E Y 331 \ / / / / / 332 `-------------' X 333----------------------------------------------------------------------- 334The horizontal line of history A---Q is taken to be the first parent of 335each merge. The commits are: 336 337* `I` is the initial commit, in which `foo` exists with contents 338 ``asdf'', and a file `quux` exists with contents ``quux''. Initial 339 commits are compared to an empty tree, so `I` is !TREESAME. 340 341* In `A`, `foo` contains just ``foo''. 342 343* `B` contains the same change as `A`. Its merge `M` is trivial and 344 hence TREESAME to all parents. 345 346* `C` does not change `foo`, but its merge `N` changes it to ``foobar'', 347 so it is not TREESAME to any parent. 348 349* `D` sets `foo` to ``baz''. Its merge `O` combines the strings from 350 `N` and `D` to ``foobarbaz''; i.e., it is not TREESAME to any parent. 351 352* `E` changes `quux` to ``xyzzy'', and its merge `P` combines the 353 strings to ``quux xyzzy''. `P` is TREESAME to `O`, but not to `E`. 354 355* `X` is an independent root commit that added a new file `side`, and `Y` 356 modified it. `Y` is TREESAME to `X`. Its merge `Q` added `side` to `P`, and 357 `Q` is TREESAME to `P`, but not to `Y`. 358 359`rev-list` walks backwards through history, including or excluding 360commits based on whether `--full-history` and/or parent rewriting 361(via `--parents` or `--children`) are used. The following settings 362are available. 363 364Default mode:: 365 Commits are included if they are not TREESAME to any parent 366 (though this can be changed, see `--sparse` below). If the 367 commit was a merge, and it was TREESAME to one parent, follow 368 only that parent. (Even if there are several TREESAME 369 parents, follow only one of them.) Otherwise, follow all 370 parents. 371+ 372This results in: 373+ 374----------------------------------------------------------------------- 375 .-A---N---O 376 / / / 377 I---------D 378----------------------------------------------------------------------- 379+ 380Note how the rule to only follow the TREESAME parent, if one is 381available, removed `B` from consideration entirely. `C` was 382considered via `N`, but is TREESAME. Root commits are compared to an 383empty tree, so `I` is !TREESAME. 384+ 385Parent/child relations are only visible with `--parents`, but that does 386not affect the commits selected in default mode, so we have shown the 387parent lines. 388 389--full-history without parent rewriting:: 390 This mode differs from the default in one point: always follow 391 all parents of a merge, even if it is TREESAME to one of them. 392 Even if more than one side of the merge has commits that are 393 included, this does not imply that the merge itself is! In 394 the example, we get 395+ 396----------------------------------------------------------------------- 397 I A B N D O P Q 398----------------------------------------------------------------------- 399+ 400`M` was excluded because it is TREESAME to both parents. `E`, 401`C` and `B` were all walked, but only `B` was !TREESAME, so the others 402do not appear. 403+ 404Note that without parent rewriting, it is not really possible to talk 405about the parent/child relationships between the commits, so we show 406them disconnected. 407 408--full-history with parent rewriting:: 409 Ordinary commits are only included if they are !TREESAME 410 (though this can be changed, see `--sparse` below). 411+ 412Merges are always included. However, their parent list is rewritten: 413Along each parent, prune away commits that are not included 414themselves. This results in 415+ 416----------------------------------------------------------------------- 417 .-A---M---N---O---P---Q 418 / / / / / 419 I B / D / 420 \ / / / / 421 `-------------' 422----------------------------------------------------------------------- 423+ 424Compare to `--full-history` without rewriting above. Note that `E` 425was pruned away because it is TREESAME, but the parent list of P was 426rewritten to contain `E`'s parent `I`. The same happened for `C` and 427`N`, and `X`, `Y` and `Q`. 428 429In addition to the above settings, you can change whether TREESAME 430affects inclusion: 431 432--dense:: 433 Commits that are walked are included if they are not TREESAME 434 to any parent. 435 436--sparse:: 437 All commits that are walked are included. 438+ 439Note that without `--full-history`, this still simplifies merges: if 440one of the parents is TREESAME, we follow only that one, so the other 441sides of the merge are never walked. 442 443--simplify-merges:: 444 First, build a history graph in the same way that 445 `--full-history` with parent rewriting does (see above). 446+ 447Then simplify each commit `C` to its replacement `C'` in the final 448history according to the following rules: 449+ 450-- 451* Set `C'` to `C`. 452+ 453* Replace each parent `P` of `C'` with its simplification `P'`. In 454 the process, drop parents that are ancestors of other parents or that are 455 root commits TREESAME to an empty tree, and remove duplicates, but take care 456 to never drop all parents that we are TREESAME to. 457+ 458* If after this parent rewriting, `C'` is a root or merge commit (has 459 zero or >1 parents), a boundary commit, or !TREESAME, it remains. 460 Otherwise, it is replaced with its only parent. 461-- 462+ 463The effect of this is best shown by way of comparing to 464`--full-history` with parent rewriting. The example turns into: 465+ 466----------------------------------------------------------------------- 467 .-A---M---N---O 468 / / / 469 I B D 470 \ / / 471 `---------' 472----------------------------------------------------------------------- 473+ 474Note the major differences in `N`, `P`, and `Q` over `--full-history`: 475+ 476-- 477* `N`'s parent list had `I` removed, because it is an ancestor of the 478 other parent `M`. Still, `N` remained because it is !TREESAME. 479+ 480* `P`'s parent list similarly had `I` removed. `P` was then 481 removed completely, because it had one parent and is TREESAME. 482+ 483* `Q`'s parent list had `Y` simplified to `X`. `X` was then removed, because it 484 was a TREESAME root. `Q` was then removed completely, because it had one 485 parent and is TREESAME. 486-- 487 488Finally, there is a fifth simplification mode available: 489 490--ancestry-path:: 491 Limit the displayed commits to those directly on the ancestry 492 chain between the ``from'' and ``to'' commits in the given commit 493 range. I.e. only display commits that are ancestor of the ``to'' 494 commit and descendants of the ``from'' commit. 495+ 496As an example use case, consider the following commit history: 497+ 498----------------------------------------------------------------------- 499 D---E-------F 500 / \ \ 501 B---C---G---H---I---J 502 / \ 503 A-------K---------------L--M 504----------------------------------------------------------------------- 505+ 506A regular 'D..M' computes the set of commits that are ancestors of `M`, 507but excludes the ones that are ancestors of `D`. This is useful to see 508what happened to the history leading to `M` since `D`, in the sense 509that ``what does `M` have that did not exist in `D`''. The result in this 510example would be all the commits, except `A` and `B` (and `D` itself, 511of course). 512+ 513When we want to find out what commits in `M` are contaminated with the 514bug introduced by `D` and need fixing, however, we might want to view 515only the subset of 'D..M' that are actually descendants of `D`, i.e. 516excluding `C` and `K`. This is exactly what the `--ancestry-path` 517option does. Applied to the 'D..M' range, it results in: 518+ 519----------------------------------------------------------------------- 520 E-------F 521 \ \ 522 G---H---I---J 523 \ 524 L--M 525----------------------------------------------------------------------- 526 527The `--simplify-by-decoration` option allows you to view only the 528big picture of the topology of the history, by omitting commits 529that are not referenced by tags. Commits are marked as !TREESAME 530(in other words, kept after history simplification rules described 531above) if (1) they are referenced by tags, or (2) they change the 532contents of the paths given on the command line. All other 533commits are marked as TREESAME (subject to be simplified away). 534 535ifdef::git-rev-list[] 536Bisection Helpers 537~~~~~~~~~~~~~~~~~ 538 539--bisect:: 540 Limit output to the one commit object which is roughly halfway between 541 included and excluded commits. Note that the bad bisection ref 542 `refs/bisect/bad` is added to the included commits (if it 543 exists) and the good bisection refs `refs/bisect/good-*` are 544 added to the excluded commits (if they exist). Thus, supposing there 545 are no refs in `refs/bisect/`, if 546+ 547----------------------------------------------------------------------- 548 $ git rev-list --bisect foo ^bar ^baz 549----------------------------------------------------------------------- 550+ 551outputs 'midpoint', the output of the two commands 552+ 553----------------------------------------------------------------------- 554 $ git rev-list foo ^midpoint 555 $ git rev-list midpoint ^bar ^baz 556----------------------------------------------------------------------- 557+ 558would be of roughly the same length. Finding the change which 559introduces a regression is thus reduced to a binary search: repeatedly 560generate and test new 'midpoint's until the commit chain is of length 561one. 562 563--bisect-vars:: 564 This calculates the same as `--bisect`, except that refs in 565 `refs/bisect/` are not used, and except that this outputs 566 text ready to be eval'ed by the shell. These lines will assign the 567 name of the midpoint revision to the variable `bisect_rev`, and the 568 expected number of commits to be tested after `bisect_rev` is tested 569 to `bisect_nr`, the expected number of commits to be tested if 570 `bisect_rev` turns out to be good to `bisect_good`, the expected 571 number of commits to be tested if `bisect_rev` turns out to be bad to 572 `bisect_bad`, and the number of commits we are bisecting right now to 573 `bisect_all`. 574 575--bisect-all:: 576 This outputs all the commit objects between the included and excluded 577 commits, ordered by their distance to the included and excluded 578 commits. Refs in `refs/bisect/` are not used. The farthest 579 from them is displayed first. (This is the only one displayed by 580 `--bisect`.) 581+ 582This is useful because it makes it easy to choose a good commit to 583test when you want to avoid to test some of them for some reason (they 584may not compile for example). 585+ 586This option can be used along with `--bisect-vars`, in this case, 587after all the sorted commit objects, there will be the same text as if 588`--bisect-vars` had been used alone. 589endif::git-rev-list[] 590 591 592Commit Ordering 593~~~~~~~~~~~~~~~ 594 595By default, the commits are shown in reverse chronological order. 596 597--date-order:: 598 Show no parents before all of its children are shown, but 599 otherwise show commits in the commit timestamp order. 600 601--author-date-order:: 602 Show no parents before all of its children are shown, but 603 otherwise show commits in the author timestamp order. 604 605--topo-order:: 606 Show no parents before all of its children are shown, and 607 avoid showing commits on multiple lines of history 608 intermixed. 609+ 610For example, in a commit history like this: 611+ 612---------------------------------------------------------------- 613 614 ---1----2----4----7 615 \ \ 616 3----5----6----8--- 617 618---------------------------------------------------------------- 619+ 620where the numbers denote the order of commit timestamps, `git 621rev-list` and friends with `--date-order` show the commits in the 622timestamp order: 8 7 6 5 4 3 2 1. 623+ 624With `--topo-order`, they would show 8 6 5 3 7 4 2 1 (or 8 7 4 2 6 5 6253 1); some older commits are shown before newer ones in order to 626avoid showing the commits from two parallel development track mixed 627together. 628 629--reverse:: 630 Output the commits in reverse order. 631 Cannot be combined with `--walk-reflogs`. 632 633Object Traversal 634~~~~~~~~~~~~~~~~ 635 636These options are mostly targeted for packing of Git repositories. 637 638--objects:: 639 Print the object IDs of any object referenced by the listed 640 commits. `--objects foo ^bar` thus means ``send me 641 all object IDs which I need to download if I have the commit 642 object _bar_ but not _foo_''. 643 644--objects-edge:: 645 Similar to `--objects`, but also print the IDs of excluded 646 commits prefixed with a ``-'' character. This is used by 647 linkgit:git-pack-objects[1] to build ``thin'' pack, which records 648 objects in deltified form based on objects contained in these 649 excluded commits to reduce network traffic. 650 651--unpacked:: 652 Only useful with `--objects`; print the object IDs that are not 653 in packs. 654 655--no-walk[=(sorted|unsorted)]:: 656 Only show the given commits, but do not traverse their ancestors. 657 This has no effect if a range is specified. If the argument 658 `unsorted` is given, the commits are shown in the order they were 659 given on the command line. Otherwise (if `sorted` or no argument 660 was given), the commits are shown in reverse chronological order 661 by commit time. 662 663--do-walk:: 664 Overrides a previous `--no-walk`. 665 666Commit Formatting 667~~~~~~~~~~~~~~~~~ 668 669ifdef::git-rev-list[] 670Using these options, linkgit:git-rev-list[1] will act similar to the 671more specialized family of commit log tools: linkgit:git-log[1], 672linkgit:git-show[1], and linkgit:git-whatchanged[1] 673endif::git-rev-list[] 674 675include::pretty-options.txt[] 676 677--relative-date:: 678 Synonym for `--date=relative`. 679 680--date=(relative|local|default|iso|rfc|short|raw):: 681 Only takes effect for dates shown in human-readable format, such 682 as when using `--pretty`. `log.date` config variable sets a default 683 value for the log command's `--date` option. 684+ 685`--date=relative` shows dates relative to the current time, 686e.g. ``2 hours ago''. 687+ 688`--date=local` shows timestamps in user's local time zone. 689+ 690`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. 691+ 692`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 693format, often found in email messages. 694+ 695`--date=short` shows only the date, but not the time, in `YYYY-MM-DD` format. 696+ 697`--date=raw` shows the date in the internal raw Git format `%s %z` format. 698+ 699`--date=default` shows timestamps in the original time zone 700(either committer's or author's). 701 702ifdef::git-rev-list[] 703--header:: 704 Print the contents of the commit in raw-format; each record is 705 separated with a NUL character. 706endif::git-rev-list[] 707 708--parents:: 709 Print also the parents of the commit (in the form "commit parent..."). 710 Also enables parent rewriting, see 'History Simplification' below. 711 712--children:: 713 Print also the children of the commit (in the form "commit child..."). 714 Also enables parent rewriting, see 'History Simplification' below. 715 716ifdef::git-rev-list[] 717--timestamp:: 718 Print the raw commit timestamp. 719endif::git-rev-list[] 720 721--left-right:: 722 Mark which side of a symmetric diff a commit is reachable from. 723 Commits from the left side are prefixed with `<` and those from 724 the right with `>`. If combined with `--boundary`, those 725 commits are prefixed with `-`. 726+ 727For example, if you have this topology: 728+ 729----------------------------------------------------------------------- 730 y---b---b branch B 731 / \ / 732 / . 733 / / \ 734 o---x---a---a branch A 735----------------------------------------------------------------------- 736+ 737you would get an output like this: 738+ 739----------------------------------------------------------------------- 740 $ git rev-list --left-right --boundary --pretty=oneline A...B 741 742 >bbbbbbb... 3rd on b 743 >bbbbbbb... 2nd on b 744 <aaaaaaa... 3rd on a 745 <aaaaaaa... 2nd on a 746 -yyyyyyy... 1st on b 747 -xxxxxxx... 1st on a 748----------------------------------------------------------------------- 749 750--graph:: 751 Draw a text-based graphical representation of the commit history 752 on the left hand side of the output. This may cause extra lines 753 to be printed in between commits, in order for the graph history 754 to be drawn properly. 755+ 756This enables parent rewriting, see 'History Simplification' below. 757+ 758This implies the `--topo-order` option by default, but the 759`--date-order` option may also be specified. 760 761--show-linear-break[=<barrier>]:: 762 When --graph is not used, all history branches are flattened 763 which can make it hard to see that the two consecutive commits 764 do not belong to a linear branch. This option puts a barrier 765 in between them in that case. If `<barrier>` is specified, it 766 is the string that will be shown instead of the default one. 767 768ifdef::git-rev-list[] 769--count:: 770 Print a number stating how many commits would have been 771 listed, and suppress all other output. When used together 772 with `--left-right`, instead print the counts for left and 773 right commits, separated by a tab. When used together with 774 `--cherry-mark`, omit patch equivalent commits from these 775 counts and print the count for equivalent commits separated 776 by a tab. 777endif::git-rev-list[] 778 779ifndef::git-rev-list[] 780Diff Formatting 781~~~~~~~~~~~~~~~ 782 783Listed below are options that control the formatting of diff output. 784Some of them are specific to linkgit:git-rev-list[1], however other diff 785options may be given. See linkgit:git-diff-files[1] for more options. 786 787-c:: 788 With this option, diff output for a merge commit 789 shows the differences from each of the parents to the merge result 790 simultaneously instead of showing pairwise diff between a parent 791 and the result one at a time. Furthermore, it lists only files 792 which were modified from all parents. 793 794--cc:: 795 This flag implies the `-c` option and further compresses the 796 patch output by omitting uninteresting hunks whose contents in 797 the parents have only two variants and the merge result picks 798 one of them without modification. 799 800-m:: 801 This flag makes the merge commits show the full diff like 802 regular commits; for each merge parent, a separate log entry 803 and diff is generated. An exception is that only diff against 804 the first parent is shown when `--first-parent` option is given; 805 in that case, the output represents the changes the merge 806 brought _into_ the then-current branch. 807 808-r:: 809 Show recursive diffs. 810 811-t:: 812 Show the tree objects in the diff output. This implies `-r`. 813endif::git-rev-list[]