Git hash function transition
============================

Objective
---------
Migrate Git from SHA-1 to a stronger hash function.

Background
----------
At its core, the Git version control system is a content addressable
filesystem. It uses the SHA-1 hash function to name content. For
example, files, directories, and revisions are referred to by hash
values unlike in other traditional version control systems where files
or versions are referred to via sequential numbers. The use of a hash
function to address its content delivers a few advantages:

* Integrity checking is easy. Bit flips, for example, are easily
  detected, as the hash of corrupted content does not match its name.
* Lookup of objects is fast.

Using a cryptographically secure hash function brings additional
advantages:

* Object names can be signed and third parties can trust the hash to
  address the signed object and all objects it references.
* Communication using Git protocol and out of band communication
  methods have a short reliable string that can be used to reliably
  address stored content.

Over time some flaws in SHA-1 have been discovered by security
researchers. On 23 February 2017 the SHAttered attack
(https://shattered.io) demonstrated a practical SHA-1 hash collision.

Git v2.13.0 and later subsequently moved to a hardened SHA-1
implementation by default, which isn't vulnerable to the SHAttered
attack.

Thus Git has in effect already migrated to a new hash that isn't SHA-1
and doesn't share its vulnerabilities, its new hash function just
happens to produce exactly the same output for all known inputs,
except two PDFs published by the SHAttered researchers, and the new
implementation (written by those researchers) claims to detect future
cryptanalytic collision attacks.

Regardless, it's considered prudent to move past any variant of SHA-1
to a new hash. There's no guarantee that future attacks on SHA-1 won't
be published in the future, and those attacks may not have viable
mitigations.

If SHA-1 and its variants were to be truly broken, Git's hash function
could not be considered cryptographically secure any more. This would
impact the communication of hash values because we could not trust
that a given hash value represented the known good version of content
that the speaker intended.

SHA-1 still possesses the other properties such as fast object lookup
and safe error checking, but other hash functions are equally suitable
that are believed to be cryptographically secure.

Goals
-----
1. The transition to SHA-256 can be done one local repository at a time.
   a. Requiring no action by any other party.
   b. A SHA-256 repository can communicate with SHA-1 Git servers
      (push/fetch).
   c. Users can use SHA-1 and SHA-256 identifiers for objects
      interchangeably (see "Object names on the command line", below).
   d. New signed objects make use of a stronger hash function than
      SHA-1 for their security guarantees.
2. Allow a complete transition away from SHA-1.
   a. Local metadata for SHA-1 compatibility can be removed from a
      repository if compatibility with SHA-1 is no longer needed.
3. Maintainability throughout the process.
   a. The object format is kept simple and consistent.
   b. Creation of a generalized repository conversion tool.

Non-Goals
---------
1. Add SHA-256 support to Git protocol. This is valuable and the
   logical next step but it is out of scope for this initial design.
2. Transparently improving the security of existing SHA-1 signed
   objects.
3. Intermixing objects using multiple hash functions in a single
   repository.
4. Taking the opportunity to fix other bugs in Git's formats and
   protocols.
5. Shallow clones and fetches into a SHA-256 repository. (This will
   change when we add SHA-256 support to Git protocol.)
6. Skip fetching some submodules of a project into a SHA-256
   repository. (This also depends on SHA-256 support in Git
   protocol.)

Overview
--------
We introduce a new repository format extension. Repositories with this
extension enabled use SHA-256 instead of SHA-1 to name their objects.
This affects both object names and object content --- both the names
of objects and all references to other objects within an object are
switched to the new hash function.

SHA-256 repositories cannot be read by older versions of Git.

Alongside the packfile, a SHA-256 repository stores a bidirectional
mapping between SHA-256 and SHA-1 object names. The mapping is generated
locally and can be verified using "git fsck". Object lookups use this
mapping to allow naming objects using either their SHA-1 and SHA-256 names
interchangeably.

"git cat-file" and "git hash-object" gain options to display an object
in its sha1 form and write an object given its sha1 form. This
requires all objects referenced by that object to be present in the
object database so that they can be named using the appropriate name
(using the bidirectional hash mapping).

Fetches from a SHA-1 based server convert the fetched objects into
SHA-256 form and record the mapping in the bidirectional mapping table
(see below for details). Pushes to a SHA-1 based server convert the
objects being pushed into sha1 form so the server does not have to be
aware of the hash function the client is using.

Detailed Design
---------------
Repository format extension
~~~~~~~~~~~~~~~~~~~~~~~~~~~
A SHA-256 repository uses repository format version `1` (see
Documentation/technical/repository-version.txt) with extensions
`objectFormat` and `compatObjectFormat`:

        [core]
                repositoryFormatVersion = 1
        [extensions]
                objectFormat = sha256
                compatObjectFormat = sha1

The combination of setting `core.repositoryFormatVersion=1` and
populating `extensions.*` ensures that all versions of Git later than
`v0.99.9l` will die instead of trying to operate on the SHA-256
repository, instead producing an error message.

        # Between v0.99.9l and v2.7.0
        $ git status
        fatal: Expected git repo version <= 0, found 1
        # After v2.7.0
        $ git status
        fatal: unknown repository extensions found:
                objectformat
                compatobjectformat

See the "Transition plan" section below for more details on these
repository extensions.

Object names
~~~~~~~~~~~~
Objects can be named by their 40 hexadecimal digit sha1-name or 64
hexadecimal digit sha256-name, plus names derived from those (see
gitrevisions(7)).

The sha1-name of an object is the SHA-1 of the concatenation of its
type, length, a nul byte, and the object's sha1-content. This is the
traditional <sha1> used in Git to name objects.

The sha256-name of an object is the SHA-256 of the concatenation of its
type, length, a nul byte, and the object's sha256-content.

Object format
~~~~~~~~~~~~~
The content as a byte sequence of a tag, commit, or tree object named
by sha1 and sha256 differ because an object named by sha256-name refers to
other objects by their sha256-names and an object named by sha1-name
refers to other objects by their sha1-names.

The sha256-content of an object is the same as its sha1-content, except
that objects referenced by the object are named using their sha256-names
instead of sha1-names. Because a blob object does not refer to any
other object, its sha1-content and sha256-content are the same.

The format allows round-trip conversion between sha256-content and
sha1-content.

Object storage
~~~~~~~~~~~~~~
Loose objects use zlib compression and packed objects use the packed
format described in Documentation/technical/pack-format.txt, just like
today. The content that is compressed and stored uses sha256-content
instead of sha1-content.

Pack index
~~~~~~~~~~
Pack index (.idx) files use a new v3 format that supports multiple
hash functions. They have the following format (all integers are in
network byte order):

- A header appears at the beginning and consists of the following:
  - The 4-byte pack index signature: '\377t0c'
  - 4-byte version number: 3
  - 4-byte length of the header section, including the signature and
    version number
  - 4-byte number of objects contained in the pack
  - 4-byte number of object formats in this pack index: 2
  - For each object format:
    - 4-byte format identifier (e.g., 'sha1' for SHA-1)
    - 4-byte length in bytes of shortened object names. This is the
      shortest possible length needed to make names in the shortened
      object name table unambiguous.
    - 4-byte integer, recording where tables relating to this format
      are stored in this index file, as an offset from the beginning.
  - 4-byte offset to the trailer from the beginning of this file.
  - Zero or more additional key/value pairs (4-byte key, 4-byte
    value). Only one key is supported: 'PSRC'. See the "Loose objects
    and unreachable objects" section for supported values and how this
    is used.  All other keys are reserved. Readers must ignore
    unrecognized keys.
- Zero or more NUL bytes. This can optionally be used to improve the
  alignment of the full object name table below.
- Tables for the first object format:
  - A sorted table of shortened object names.  These are prefixes of
    the names of all objects in this pack file, packed together
    without offset values to reduce the cache footprint of the binary
    search for a specific object name.

  - A table of full object names in pack order. This allows resolving
    a reference to "the nth object in the pack file" (from a
    reachability bitmap or from the next table of another object
    format) to its object name.

  - A table of 4-byte values mapping object name order to pack order.
    For an object in the table of sorted shortened object names, the
    value at the corresponding index in this table is the index in the
    previous table for that same object.

    This can be used to look up the object in reachability bitmaps or
    to look up its name in another object format.

  - A table of 4-byte CRC32 values of the packed object data, in the
    order that the objects appear in the pack file. This is to allow
    compressed data to be copied directly from pack to pack during
    repacking without undetected data corruption.

  - A table of 4-byte offset values. For an object in the table of
    sorted shortened object names, the value at the corresponding
    index in this table indicates where that object can be found in
    the pack file. These are usually 31-bit pack file offsets, but
    large offsets are encoded as an index into the next table with the
    most significant bit set.

  - A table of 8-byte offset entries (empty for pack files less than
    2 GiB). Pack files are organized with heavily used objects toward
    the front, so most object references should not need to refer to
    this table.
- Zero or more NUL bytes.
- Tables for the second object format, with the same layout as above,
  up to and not including the table of CRC32 values.
- Zero or more NUL bytes.
- The trailer consists of the following:
  - A copy of the 20-byte SHA-256 checksum at the end of the
    corresponding packfile.

  - 20-byte SHA-256 checksum of all of the above.

Loose object index
~~~~~~~~~~~~~~~~~~
A new file $GIT_OBJECT_DIR/loose-object-idx contains information about
all loose objects. Its format is

  # loose-object-idx
  (sha256-name SP sha1-name LF)*

where the object names are in hexadecimal format. The file is not
sorted.

The loose object index is protected against concurrent writes by a
lock file $GIT_OBJECT_DIR/loose-object-idx.lock. To add a new loose
object:

1. Write the loose object to a temporary file, like today.
2. Open loose-object-idx.lock with O_CREAT | O_EXCL to acquire the lock.
3. Rename the loose object into place.
4. Open loose-object-idx with O_APPEND and write the new object
5. Unlink loose-object-idx.lock to release the lock.

To remove entries (e.g. in "git pack-refs" or "git-prune"):

1. Open loose-object-idx.lock with O_CREAT | O_EXCL to acquire the
   lock.
2. Write the new content to loose-object-idx.lock.
3. Unlink any loose objects being removed.
4. Rename to replace loose-object-idx, releasing the lock.

Translation table
~~~~~~~~~~~~~~~~~
The index files support a bidirectional mapping between sha1-names
and sha256-names. The lookup proceeds similarly to ordinary object
lookups. For example, to convert a sha1-name to a sha256-name:

 1. Look for the object in idx files. If a match is present in the
    idx's sorted list of truncated sha1-names, then:
    a. Read the corresponding entry in the sha1-name order to pack
       name order mapping.
    b. Read the corresponding entry in the full sha1-name table to
       verify we found the right object. If it is, then
    c. Read the corresponding entry in the full sha256-name table.
       That is the object's sha256-name.
 2. Check for a loose object. Read lines from loose-object-idx until
    we find a match.

Step (1) takes the same amount of time as an ordinary object lookup:
O(number of packs * log(objects per pack)). Step (2) takes O(number of
loose objects) time. To maintain good performance it will be necessary
to keep the number of loose objects low. See the "Loose objects and
unreachable objects" section below for more details.

Since all operations that make new objects (e.g., "git commit") add
the new objects to the corresponding index, this mapping is possible
for all objects in the object store.

Reading an object's sha1-content
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The sha1-content of an object can be read by converting all sha256-names
its sha256-content references to sha1-names using the translation table.

Fetch
~~~~~
Fetching from a SHA-1 based server requires translating between SHA-1
and SHA-256 based representations on the fly.

SHA-1s named in the ref advertisement that are present on the client
can be translated to SHA-256 and looked up as local objects using the
translation table.

Negotiation proceeds as today. Any "have"s generated locally are
converted to SHA-1 before being sent to the server, and SHA-1s
mentioned by the server are converted to SHA-256 when looking them up
locally.

After negotiation, the server sends a packfile containing the
requested objects. We convert the packfile to SHA-256 format using
the following steps:

1. index-pack: inflate each object in the packfile and compute its
   SHA-1. Objects can contain deltas in OBJ_REF_DELTA format against
   objects the client has locally. These objects can be looked up
   using the translation table and their sha1-content read as
   described above to resolve the deltas.
2. topological sort: starting at the "want"s from the negotiation
   phase, walk through objects in the pack and emit a list of them,
   excluding blobs, in reverse topologically sorted order, with each
   object coming later in the list than all objects it references.
   (This list only contains objects reachable from the "wants". If the
   pack from the server contained additional extraneous objects, then
   they will be discarded.)
3. convert to sha256: open a new (sha256) packfile. Read the topologically
   sorted list just generated. For each object, inflate its
   sha1-content, convert to sha256-content, and write it to the sha256
   pack. Record the new sha1<->sha256 mapping entry for use in the idx.
4. sort: reorder entries in the new pack to match the order of objects
   in the pack the server generated and include blobs. Write a sha256 idx
   file
5. clean up: remove the SHA-1 based pack file, index, and
   topologically sorted list obtained from the server in steps 1
   and 2.

Step 3 requires every object referenced by the new object to be in the
translation table. This is why the topological sort step is necessary.

As an optimization, step 1 could write a file describing what non-blob
objects each object it has inflated from the packfile references. This
makes the topological sort in step 2 possible without inflating the
objects in the packfile for a second time. The objects need to be
inflated again in step 3, for a total of two inflations.

Step 4 is probably necessary for good read-time performance. "git
pack-objects" on the server optimizes the pack file for good data
locality (see Documentation/technical/pack-heuristics.txt).

Details of this process are likely to change. It will take some
experimenting to get this to perform well.

Push
~~~~
Push is simpler than fetch because the objects referenced by the
pushed objects are already in the translation table. The sha1-content
of each object being pushed can be read as described in the "Reading
an object's sha1-content" section to generate the pack written by git
send-pack.

Signed Commits
~~~~~~~~~~~~~~
We add a new field "gpgsig-sha256" to the commit object format to allow
signing commits without relying on SHA-1. It is similar to the
existing "gpgsig" field. Its signed payload is the sha256-content of the
commit object with any "gpgsig" and "gpgsig-sha256" fields removed.

This means commits can be signed
1. using SHA-1 only, as in existing signed commit objects
2. using both SHA-1 and SHA-256, by using both gpgsig-sha256 and gpgsig
   fields.
3. using only SHA-256, by only using the gpgsig-sha256 field.

Old versions of "git verify-commit" can verify the gpgsig signature in
cases (1) and (2) without modifications and view case (3) as an
ordinary unsigned commit.

Signed Tags
~~~~~~~~~~~
We add a new field "gpgsig-sha256" to the tag object format to allow
signing tags without relying on SHA-1. Its signed payload is the
sha256-content of the tag with its gpgsig-sha256 field and "-----BEGIN PGP
SIGNATURE-----" delimited in-body signature removed.

This means tags can be signed
1. using SHA-1 only, as in existing signed tag objects
2. using both SHA-1 and SHA-256, by using gpgsig-sha256 and an in-body
   signature.
3. using only SHA-256, by only using the gpgsig-sha256 field.

Mergetag embedding
~~~~~~~~~~~~~~~~~~
The mergetag field in the sha1-content of a commit contains the
sha1-content of a tag that was merged by that commit.

The mergetag field in the sha256-content of the same commit contains the
sha256-content of the same tag.

Submodules
~~~~~~~~~~
To convert recorded submodule pointers, you need to have the converted
submodule repository in place. The translation table of the submodule
can be used to look up the new hash.

Loose objects and unreachable objects
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fast lookups in the loose-object-idx require that the number of loose
objects not grow too high.

"git gc --auto" currently waits for there to be 6700 loose objects
present before consolidating them into a packfile. We will need to
measure to find a more appropriate threshold for it to use.

"git gc --auto" currently waits for there to be 50 packs present
before combining packfiles. Packing loose objects more aggressively
may cause the number of pack files to grow too quickly. This can be
mitigated by using a strategy similar to Martin Fick's exponential
rolling garbage collection script:
https://gerrit-review.googlesource.com/c/gerrit/+/35215

"git gc" currently expels any unreachable objects it encounters in
pack files to loose objects in an attempt to prevent a race when
pruning them (in case another process is simultaneously writing a new
object that refers to the about-to-be-deleted object). This leads to
an explosion in the number of loose objects present and disk space
usage due to the objects in delta form being replaced with independent
loose objects.  Worse, the race is still present for loose objects.

Instead, "git gc" will need to move unreachable objects to a new
packfile marked as UNREACHABLE_GARBAGE (using the PSRC field; see
below). To avoid the race when writing new objects referring to an
about-to-be-deleted object, code paths that write new objects will
need to copy any objects from UNREACHABLE_GARBAGE packs that they
refer to to new, non-UNREACHABLE_GARBAGE packs (or loose objects).
UNREACHABLE_GARBAGE are then safe to delete if their creation time (as
indicated by the file's mtime) is long enough ago.

To avoid a proliferation of UNREACHABLE_GARBAGE packs, they can be
combined under certain circumstances. If "gc.garbageTtl" is set to
greater than one day, then packs created within a single calendar day,
UTC, can be coalesced together. The resulting packfile would have an
mtime before midnight on that day, so this makes the effective maximum
ttl the garbageTtl + 1 day. If "gc.garbageTtl" is less than one day,
then we divide the calendar day into intervals one-third of that ttl
in duration. Packs created within the same interval can be coalesced
together. The resulting packfile would have an mtime before the end of
the interval, so this makes the effective maximum ttl equal to the
garbageTtl * 4/3.

This rule comes from Thirumala Reddy Mutchukota's JGit change
https://git.eclipse.org/r/90465.

The UNREACHABLE_GARBAGE setting goes in the PSRC field of the pack
index. More generally, that field indicates where a pack came from:

 - 1 (PACK_SOURCE_RECEIVE) for a pack received over the network
 - 2 (PACK_SOURCE_AUTO) for a pack created by a lightweight
   "gc --auto" operation
 - 3 (PACK_SOURCE_GC) for a pack created by a full gc
 - 4 (PACK_SOURCE_UNREACHABLE_GARBAGE) for potential garbage
   discovered by gc
 - 5 (PACK_SOURCE_INSERT) for locally created objects that were
   written directly to a pack file, e.g. from "git add ."

This information can be useful for debugging and for "gc --auto" to
make appropriate choices about which packs to coalesce.

Caveats
-------
Invalid objects
~~~~~~~~~~~~~~~
The conversion from sha1-content to sha256-content retains any
brokenness in the original object (e.g., tree entry modes encoded with
leading 0, tree objects whose paths are not sorted correctly, and
commit objects without an author or committer). This is a deliberate
feature of the design to allow the conversion to round-trip.

More profoundly broken objects (e.g., a commit with a truncated "tree"
header line) cannot be converted but were not usable by current Git
anyway.

Shallow clone and submodules
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Because it requires all referenced objects to be available in the
locally generated translation table, this design does not support
shallow clone or unfetched submodules. Protocol improvements might
allow lifting this restriction.

Alternates
~~~~~~~~~~
For the same reason, a sha256 repository cannot borrow objects from a
sha1 repository using objects/info/alternates or
$GIT_ALTERNATE_OBJECT_REPOSITORIES.

git notes
~~~~~~~~~
The "git notes" tool annotates objects using their sha1-name as key.
This design does not describe a way to migrate notes trees to use
sha256-names. That migration is expected to happen separately (for
example using a file at the root of the notes tree to describe which
hash it uses).

Server-side cost
~~~~~~~~~~~~~~~~
Until Git protocol gains SHA-256 support, using SHA-256 based storage
on public-facing Git servers is strongly discouraged. Once Git
protocol gains SHA-256 support, SHA-256 based servers are likely not
to support SHA-1 compatibility, to avoid what may be a very expensive
hash reencode during clone and to encourage peers to modernize.

The design described here allows fetches by SHA-1 clients of a
personal SHA-256 repository because it's not much more difficult than
allowing pushes from that repository. This support needs to be guarded
by a configuration option --- servers like git.kernel.org that serve a
large number of clients would not be expected to bear that cost.

Meaning of signatures
~~~~~~~~~~~~~~~~~~~~~
The signed payload for signed commits and tags does not explicitly
name the hash used to identify objects. If some day Git adopts a new
hash function with the same length as the current SHA-1 (40
hexadecimal digit) or SHA-256 (64 hexadecimal digit) objects then the
intent behind the PGP signed payload in an object signature is
unclear:

        object e7e07d5a4fcc2a203d9873968ad3e6bd4d7419d7
        type commit
        tag v2.12.0
        tagger Junio C Hamano <gitster@pobox.com> 1487962205 -0800

        Git 2.12

Does this mean Git v2.12.0 is the commit with sha1-name
e7e07d5a4fcc2a203d9873968ad3e6bd4d7419d7 or the commit with
new-40-digit-hash-name e7e07d5a4fcc2a203d9873968ad3e6bd4d7419d7?

Fortunately SHA-256 and SHA-1 have different lengths. If Git starts
using another hash with the same length to name objects, then it will
need to change the format of signed payloads using that hash to
address this issue.

Object names on the command line
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To support the transition (see Transition plan below), this design
supports four different modes of operation:

 1. ("dark launch") Treat object names input by the user as SHA-1 and
    convert any object names written to output to SHA-1, but store
    objects using SHA-256.  This allows users to test the code with no
    visible behavior change except for performance.  This allows
    allows running even tests that assume the SHA-1 hash function, to
    sanity-check the behavior of the new mode.

 2. ("early transition") Allow both SHA-1 and SHA-256 object names in
    input. Any object names written to output use SHA-1. This allows
    users to continue to make use of SHA-1 to communicate with peers
    (e.g. by email) that have not migrated yet and prepares for mode 3.

 3. ("late transition") Allow both SHA-1 and SHA-256 object names in
    input. Any object names written to output use SHA-256. In this
    mode, users are using a more secure object naming method by
    default.  The disruption is minimal as long as most of their peers
    are in mode 2 or mode 3.

 4. ("post-transition") Treat object names input by the user as
    SHA-256 and write output using SHA-256. This is safer than mode 3
    because there is less risk that input is incorrectly interpreted
    using the wrong hash function.

The mode is specified in configuration.

The user can also explicitly specify which format to use for a
particular revision specifier and for output, overriding the mode. For
example:

git --output-format=sha1 log abac87a^{sha1}..f787cac^{sha256}

Choice of Hash
--------------
In early 2005, around the time that Git was written,  Xiaoyun Wang,
Yiqun Lisa Yin, and Hongbo Yu announced an attack finding SHA-1
collisions in 2^69 operations. In August they published details.
Luckily, no practical demonstrations of a collision in full SHA-1 were
published until 10 years later, in 2017.

Git v2.13.0 and later subsequently moved to a hardened SHA-1
implementation by default that mitigates the SHAttered attack, but
SHA-1 is still believed to be weak.

The hash to replace this hardened SHA-1 should be stronger than SHA-1
was: we would like it to be trustworthy and useful in practice for at
least 10 years.

Some other relevant properties:

1. A 256-bit hash (long enough to match common security practice; not
   excessively long to hurt performance and disk usage).

2. High quality implementations should be widely available (e.g., in
   OpenSSL and Apple CommonCrypto).

3. The hash function's properties should match Git's needs (e.g. Git
   requires collision and 2nd preimage resistance and does not require
   length extension resistance).

4. As a tiebreaker, the hash should be fast to compute (fortunately
   many contenders are faster than SHA-1).

We choose SHA-256.

Transition plan
---------------
Some initial steps can be implemented independently of one another:
- adding a hash function API (vtable)
- teaching fsck to tolerate the gpgsig-sha256 field
- excluding gpgsig-* from the fields copied by "git commit --amend"
- annotating tests that depend on SHA-1 values with a SHA1 test
  prerequisite
- using "struct object_id", GIT_MAX_RAWSZ, and GIT_MAX_HEXSZ
  consistently instead of "unsigned char *" and the hardcoded
  constants 20 and 40.
- introducing index v3
- adding support for the PSRC field and safer object pruning


The first user-visible change is the introduction of the objectFormat
extension (without compatObjectFormat). This requires:
- implementing the loose-object-idx
- teaching fsck about this mode of operation
- using the hash function API (vtable) when computing object names
- signing objects and verifying signatures
- rejecting attempts to fetch from or push to an incompatible
  repository

Next comes introduction of compatObjectFormat:
- translating object names between object formats
- translating object content between object formats
- generating and verifying signatures in the compat format
- adding appropriate index entries when adding a new object to the
  object store
- --output-format option
- ^{sha1} and ^{sha256} revision notation
- configuration to specify default input and output format (see
  "Object names on the command line" above)

The next step is supporting fetches and pushes to SHA-1 repositories:
- allow pushes to a repository using the compat format
- generate a topologically sorted list of the SHA-1 names of fetched
  objects
- convert the fetched packfile to sha256 format and generate an idx
  file
- re-sort to match the order of objects in the fetched packfile

The infrastructure supporting fetch also allows converting an existing
repository. In converted repositories and new clones, end users can
gain support for the new hash function without any visible change in
behavior (see "dark launch" in the "Object names on the command line"
section). In particular this allows users to verify SHA-256 signatures
on objects in the repository, and it should ensure the transition code
is stable in production in preparation for using it more widely.

Over time projects would encourage their users to adopt the "early
transition" and then "late transition" modes to take advantage of the
new, more futureproof SHA-256 object names.

When objectFormat and compatObjectFormat are both set, commands
generating signatures would generate both SHA-1 and SHA-256 signatures
by default to support both new and old users.

In projects using SHA-256 heavily, users could be encouraged to adopt
the "post-transition" mode to avoid accidentally making implicit use
of SHA-1 object names.

Once a critical mass of users have upgraded to a version of Git that
can verify SHA-256 signatures and have converted their existing
repositories to support verifying them, we can add support for a
setting to generate only SHA-256 signatures. This is expected to be at
least a year later.

That is also a good moment to advertise the ability to convert
repositories to use SHA-256 only, stripping out all SHA-1 related
metadata. This improves performance by eliminating translation
overhead and security by avoiding the possibility of accidentally
relying on the safety of SHA-1.

Updating Git's protocols to allow a server to specify which hash
functions it supports is also an important part of this transition. It
is not discussed in detail in this document but this transition plan
assumes it happens. :)

Alternatives considered
-----------------------
Upgrading everyone working on a particular project on a flag day
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Projects like the Linux kernel are large and complex enough that
flipping the switch for all projects based on the repository at once
is infeasible.

Not only would all developers and server operators supporting
developers have to switch on the same flag day, but supporting tooling
(continuous integration, code review, bug trackers, etc) would have to
be adapted as well. This also makes it difficult to get early feedback
from some project participants testing before it is time for mass
adoption.

Using hash functions in parallel
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(e.g. https://public-inbox.org/git/22708.8913.864049.452252@chiark.greenend.org.uk/ )
Objects newly created would be addressed by the new hash, but inside
such an object (e.g. commit) it is still possible to address objects
using the old hash function.
* You cannot trust its history (needed for bisectability) in the
  future without further work
* Maintenance burden as the number of supported hash functions grows
  (they will never go away, so they accumulate). In this proposal, by
  comparison, converted objects lose all references to SHA-1.

Signed objects with multiple hashes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Instead of introducing the gpgsig-sha256 field in commit and tag objects
for sha256-content based signatures, an earlier version of this design
added "hash sha256 <sha256-name>" fields to strengthen the existing
sha1-content based signatures.

In other words, a single signature was used to attest to the object
content using both hash functions. This had some advantages:
* Using one signature instead of two speeds up the signing process.
* Having one signed payload with both hashes allows the signer to
  attest to the sha1-name and sha256-name referring to the same object.
* All users consume the same signature. Broken signatures are likely
  to be detected quickly using current versions of git.

However, it also came with disadvantages:
* Verifying a signed object requires access to the sha1-names of all
  objects it references, even after the transition is complete and
  translation table is no longer needed for anything else. To support
  this, the design added fields such as "hash sha1 tree <sha1-name>"
  and "hash sha1 parent <sha1-name>" to the sha256-content of a signed
  commit, complicating the conversion process.
* Allowing signed objects without a sha1 (for after the transition is
  complete) complicated the design further, requiring a "nohash sha1"
  field to suppress including "hash sha1" fields in the sha256-content
  and signed payload.

Lazily populated translation table
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Some of the work of building the translation table could be deferred to
push time, but that would significantly complicate and slow down pushes.
Calculating the sha1-name at object creation time at the same time it is
being streamed to disk and having its sha256-name calculated should be
an acceptable cost.

Document History
----------------

2017-03-03
bmwill@google.com, jonathantanmy@google.com, jrnieder@gmail.com,
sbeller@google.com

Initial version sent to
http://public-inbox.org/git/20170304011251.GA26789@aiede.mtv.corp.google.com

2017-03-03 jrnieder@gmail.com
Incorporated suggestions from jonathantanmy and sbeller:
* describe purpose of signed objects with each hash type
* redefine signed object verification using object content under the
  first hash function

2017-03-06 jrnieder@gmail.com
* Use SHA3-256 instead of SHA2 (thanks, Linus and brian m. carlson).[1][2]
* Make sha3-based signatures a separate field, avoiding the need for
  "hash" and "nohash" fields (thanks to peff[3]).
* Add a sorting phase to fetch (thanks to Junio for noticing the need
  for this).
* Omit blobs from the topological sort during fetch (thanks to peff).
* Discuss alternates, git notes, and git servers in the caveats
  section (thanks to Junio Hamano, brian m. carlson[4], and Shawn
  Pearce).
* Clarify language throughout (thanks to various commenters,
  especially Junio).

2017-09-27 jrnieder@gmail.com, sbeller@google.com
* use placeholder NewHash instead of SHA3-256
* describe criteria for picking a hash function.
* include a transition plan (thanks especially to Brandon Williams
  for fleshing these ideas out)
* define the translation table (thanks, Shawn Pearce[5], Jonathan
  Tan, and Masaya Suzuki)
* avoid loose object overhead by packing more aggressively in
  "git gc --auto"

Later history:

 See the history of this file in git.git for the history of subsequent
 edits. This document history is no longer being maintained as it
 would now be superfluous to the commit log

[1] http://public-inbox.org/git/CA+55aFzJtejiCjV0e43+9oR3QuJK2PiFiLQemytoLpyJWe6P9w@mail.gmail.com/
[2] http://public-inbox.org/git/CA+55aFz+gkAsDZ24zmePQuEs1XPS9BP_s8O7Q4wQ7LV7X5-oDA@mail.gmail.com/
[3] http://public-inbox.org/git/20170306084353.nrns455dvkdsfgo5@sigill.intra.peff.net/
[4] http://public-inbox.org/git/20170304224936.rqqtkdvfjgyezsht@genre.crustytoothpaste.net
[5] https://public-inbox.org/git/CAJo=hJtoX9=AyLHHpUJS7fueV9ciZ_MNpnEPHUz8Whui6g9F0A@mail.gmail.com/