1git-send-email(1) 2================= 3 4NAME 5---- 6git-send-email - Send a collection of patches as emails 7 8 9SYNOPSIS 10-------- 11'git send-email' [options] <file|directory|rev-list options>... 12 13 14DESCRIPTION 15----------- 16Takes the patches given on the command line and emails them out. 17Patches can be specified as files, directories (which will send all 18files in the directory), or directly as a revision list. In the 19last case, any format accepted by linkgit:git-format-patch[1] can 20be passed to git send-email. 21 22The header of the email is configurable by command line options. If not 23specified on the command line, the user will be prompted with a ReadLine 24enabled interface to provide the necessary information. 25 26There are two formats accepted for patch files: 27 281. mbox format files 29+ 30This is what linkgit:git-format-patch[1] generates. Most headers and MIME 31formatting are ignored. 32 332. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl' 34script 35+ 36This format expects the first line of the file to contain the "Cc:" value 37and the "Subject:" of the message as the second line. 38 39 40OPTIONS 41------- 42 43Composing 44~~~~~~~~~ 45 46--annotate:: 47 Review and edit each patch you're about to send. See the 48 CONFIGURATION section for 'sendemail.multiedit'. 49 50--bcc=<address>:: 51 Specify a "Bcc:" value for each email. Default is the value of 52 'sendemail.bcc'. 53+ 54The --bcc option must be repeated for each user you want on the bcc list. 55 56--cc=<address>:: 57 Specify a starting "Cc:" value for each email. 58 Default is the value of 'sendemail.cc'. 59+ 60The --cc option must be repeated for each user you want on the cc list. 61 62--compose:: 63 Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1]) 64 to edit an introductory message for the patch series. 65+ 66When '--compose' is used, git send-email will use the From, Subject, and 67In-Reply-To headers specified in the message. If the body of the message 68(what you type after the headers and a blank line) only contains blank 69(or GIT: prefixed) lines the summary won't be sent, but From, Subject, 70and In-Reply-To headers will be used unless they are removed. 71+ 72Missing From or In-Reply-To headers will be prompted for. 73+ 74See the CONFIGURATION section for 'sendemail.multiedit'. 75 76--from=<address>:: 77 Specify the sender of the emails. If not specified on the command line, 78 the value of the 'sendemail.from' configuration option is used. If 79 neither the command line option nor 'sendemail.from' are set, then the 80 user will be prompted for the value. The default for the prompt will be 81 the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not 82 set, as returned by "git var -l". 83 84--in-reply-to=<identifier>:: 85 Specify the contents of the first In-Reply-To header. 86 Subsequent emails will refer to the previous email 87 instead of this if --chain-reply-to is set. 88 Only necessary if --compose is also set. If --compose 89 is not set, this will be prompted for. 90 91--subject=<string>:: 92 Specify the initial subject of the email thread. 93 Only necessary if --compose is also set. If --compose 94 is not set, this will be prompted for. 95 96--to=<address>:: 97 Specify the primary recipient of the emails generated. Generally, this 98 will be the upstream maintainer of the project involved. Default is the 99 value of the 'sendemail.to' configuration value; if that is unspecified, 100 this will be prompted for. 101+ 102The --to option must be repeated for each user you want on the to list. 103 104--8bit-encoding=<encoding>:: 105 When encountering a non-ASCII message or subject that does not 106 declare its encoding, add headers/quoting to indicate it is 107 encoded in <encoding>. Default is the value of the 108 'sendemail.assume8bitEncoding'; if that is unspecified, this 109 will be prompted for if any non-ASCII files are encountered. 110+ 111Note that no attempts whatsoever are made to validate the encoding. 112 113 114Sending 115~~~~~~~ 116 117--envelope-sender=<address>:: 118 Specify the envelope sender used to send the emails. 119 This is useful if your default address is not the address that is 120 subscribed to a list. In order to use the 'From' address, set the 121 value to "auto". If you use the sendmail binary, you must have 122 suitable privileges for the -f parameter. Default is the value of the 123 'sendemail.envelopesender' configuration variable; if that is 124 unspecified, choosing the envelope sender is left to your MTA. 125 126--smtp-encryption=<encryption>:: 127 Specify the encryption to use, either 'ssl' or 'tls'. Any other 128 value reverts to plain SMTP. Default is the value of 129 'sendemail.smtpencryption'. 130 131--smtp-domain=<FQDN>:: 132 Specifies the Fully Qualified Domain Name (FQDN) used in the 133 HELO/EHLO command to the SMTP server. Some servers require the 134 FQDN to match your IP address. If not set, git send-email attempts 135 to determine your FQDN automatically. Default is the value of 136 'sendemail.smtpdomain'. 137 138--smtp-pass[=<password>]:: 139 Password for SMTP-AUTH. The argument is optional: If no 140 argument is specified, then the empty string is used as 141 the password. Default is the value of 'sendemail.smtppass', 142 however '--smtp-pass' always overrides this value. 143+ 144Furthermore, passwords need not be specified in configuration files 145or on the command line. If a username has been specified (with 146'--smtp-user' or a 'sendemail.smtpuser'), but no password has been 147specified (with '--smtp-pass' or 'sendemail.smtppass'), then the 148user is prompted for a password while the input is masked for privacy. 149 150--smtp-server=<host>:: 151 If set, specifies the outgoing SMTP server to use (e.g. 152 `smtp.example.com` or a raw IP address). Alternatively it can 153 specify a full pathname of a sendmail-like program instead; 154 the program must support the `-i` option. Default value can 155 be specified by the 'sendemail.smtpserver' configuration 156 option; the built-in default is `/usr/sbin/sendmail` or 157 `/usr/lib/sendmail` if such program is available, or 158 `localhost` otherwise. 159 160--smtp-server-port=<port>:: 161 Specifies a port different from the default port (SMTP 162 servers typically listen to smtp port 25, but may also listen to 163 submission port 587, or the common SSL smtp port 465); 164 symbolic port names (e.g. "submission" instead of 587) 165 are also accepted. The port can also be set with the 166 'sendemail.smtpserverport' configuration variable. 167 168--smtp-ssl:: 169 Legacy alias for '--smtp-encryption ssl'. 170 171--smtp-user=<user>:: 172 Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser'; 173 if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'), 174 then authentication is not attempted. 175 176 177Automating 178~~~~~~~~~~ 179 180--cc-cmd=<command>:: 181 Specify a command to execute once per patch file which 182 should generate patch file specific "Cc:" entries. 183 Output of this command must be single email address per line. 184 Default is the value of 'sendemail.cccmd' configuration value. 185 186--[no-]chain-reply-to:: 187 If this is set, each email will be sent as a reply to the previous 188 email sent. If disabled with "--no-chain-reply-to", all emails after 189 the first will be sent as replies to the first email sent. When using 190 this, it is recommended that the first file given be an overview of the 191 entire patch series. Disabled by default, but the 'sendemail.chainreplyto' 192 configuration variable can be used to enable it. 193 194--identity=<identity>:: 195 A configuration identity. When given, causes values in the 196 'sendemail.<identity>' subsection to take precedence over 197 values in the 'sendemail' section. The default identity is 198 the value of 'sendemail.identity'. 199 200--[no-]signed-off-by-cc:: 201 If this is set, add emails found in Signed-off-by: or Cc: lines to the 202 cc list. Default is the value of 'sendemail.signedoffbycc' configuration 203 value; if that is unspecified, default to --signed-off-by-cc. 204 205--suppress-cc=<category>:: 206 Specify an additional category of recipients to suppress the 207 auto-cc of: 208+ 209-- 210- 'author' will avoid including the patch author 211- 'self' will avoid including the sender 212- 'cc' will avoid including anyone mentioned in Cc lines in the patch header 213 except for self (use 'self' for that). 214- 'bodycc' will avoid including anyone mentioned in Cc lines in the 215 patch body (commit message) except for self (use 'self' for that). 216- 'sob' will avoid including anyone mentioned in Signed-off-by lines except 217 for self (use 'self' for that). 218- 'cccmd' will avoid running the --cc-cmd. 219- 'body' is equivalent to 'sob' + 'bodycc' 220- 'all' will suppress all auto cc values. 221-- 222+ 223Default is the value of 'sendemail.suppresscc' configuration value; if 224that is unspecified, default to 'self' if --suppress-from is 225specified, as well as 'body' if --no-signed-off-cc is specified. 226 227--[no-]suppress-from:: 228 If this is set, do not add the From: address to the cc: list. 229 Default is the value of 'sendemail.suppressfrom' configuration 230 value; if that is unspecified, default to --no-suppress-from. 231 232--[no-]thread:: 233 If this is set, the In-Reply-To and References headers will be 234 added to each email sent. Whether each mail refers to the 235 previous email (`deep` threading per 'git format-patch' 236 wording) or to the first email (`shallow` threading) is 237 governed by "--[no-]chain-reply-to". 238+ 239If disabled with "--no-thread", those headers will not be added 240(unless specified with --in-reply-to). Default is the value of the 241'sendemail.thread' configuration value; if that is unspecified, 242default to --thread. 243+ 244It is up to the user to ensure that no In-Reply-To header already 245exists when 'git send-email' is asked to add it (especially note that 246'git format-patch' can be configured to do the threading itself). 247Failure to do so may not produce the expected result in the 248recipient's MUA. 249 250 251Administering 252~~~~~~~~~~~~~ 253 254--confirm=<mode>:: 255 Confirm just before sending: 256+ 257-- 258- 'always' will always confirm before sending 259- 'never' will never confirm before sending 260- 'cc' will confirm before sending when send-email has automatically 261 added addresses from the patch to the Cc list 262- 'compose' will confirm before sending the first message when using --compose. 263- 'auto' is equivalent to 'cc' + 'compose' 264-- 265+ 266Default is the value of 'sendemail.confirm' configuration value; if that 267is unspecified, default to 'auto' unless any of the suppress options 268have been specified, in which case default to 'compose'. 269 270--dry-run:: 271 Do everything except actually send the emails. 272 273--[no-]format-patch:: 274 When an argument may be understood either as a reference or as a file name, 275 choose to understand it as a format-patch argument ('--format-patch') 276 or as a file name ('--no-format-patch'). By default, when such a conflict 277 occurs, git send-email will fail. 278 279--quiet:: 280 Make git-send-email less verbose. One line per email should be 281 all that is output. 282 283--[no-]validate:: 284 Perform sanity checks on patches. 285 Currently, validation means the following: 286+ 287-- 288 * Warn of patches that contain lines longer than 998 characters; this 289 is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt. 290-- 291+ 292Default is the value of 'sendemail.validate'; if this is not set, 293default to '--validate'. 294 295 296CONFIGURATION 297------------- 298 299sendemail.aliasesfile:: 300 To avoid typing long email addresses, point this to one or more 301 email aliases files. You must also supply 'sendemail.aliasfiletype'. 302 303sendemail.aliasfiletype:: 304 Format of the file(s) specified in sendemail.aliasesfile. Must be 305 one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus'. 306 307sendemail.multiedit:: 308 If true (default), a single editor instance will be spawned to edit 309 files you have to edit (patches when '--annotate' is used, and the 310 summary when '--compose' is used). If false, files will be edited one 311 after the other, spawning a new editor each time. 312 313sendemail.confirm:: 314 Sets the default for whether to confirm before sending. Must be 315 one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' 316 in the previous section for the meaning of these values. 317 318 319Use gmail as the smtp server 320---------------------------- 321 322Add the following section to the config file: 323 324 [sendemail] 325 smtpencryption = tls 326 smtpserver = smtp.gmail.com 327 smtpuser = yourname@gmail.com 328 smtpserverport = 587 329 330Note: the following perl modules are required 331 Net::SMTP::SSL, MIME::Base64 and Authen::SASL 332 333 334Author 335------ 336Written by Ryan Anderson <ryan@michonline.com> 337 338git-send-email is originally based upon 339send_lots_of_email.pl by Greg Kroah-Hartman. 340 341 342Documentation 343-------------- 344Documentation by Ryan Anderson 345 346 347GIT 348--- 349Part of the linkgit:git[1] suite