1git-daemon(1) 2============= 3 4NAME 5---- 6git-daemon - A really simple server for git repositories 7 8SYNOPSIS 9-------- 10[verse] 11'git-daemon' [--verbose] [--syslog] [--export-all] 12 [--timeout=n] [--init-timeout=n] [--strict-paths] 13 [--base-path=path] [--user-path | --user-path=path] 14 [--interpolated-path=pathtemplate] 15 [--reuseaddr] [--detach] [--pid-file=file] 16 [--enable=service] [--disable=service] 17 [--allow-override=service] [--forbid-override=service] 18 [--inetd | [--listen=host_or_ipaddr] [--port=n] [--user=user [--group=group]] 19 [directory...] 20 21DESCRIPTION 22----------- 23A really simple TCP git daemon that normally listens on port "DEFAULT_GIT_PORT" 24aka 9418. It waits for a connection asking for a service, and will serve 25that service if it is enabled. 26 27It verifies that the directory has the magic file "git-daemon-export-ok", and 28it will refuse to export any git directory that hasn't explicitly been marked 29for export this way (unless the '--export-all' parameter is specified). If you 30pass some directory paths as 'git-daemon' arguments, you can further restrict 31the offers to a whitelist comprising of those. 32 33By default, only `upload-pack` service is enabled, which serves 34`git-fetch-pack` and `git-peek-remote` clients that are invoked 35from `git-fetch`, `git-ls-remote`, and `git-clone`. 36 37This is ideally suited for read-only updates, i.e., pulling from 38git repositories. 39 40An `upload-archive` also exists to serve `git-archive`. 41 42OPTIONS 43------- 44--strict-paths:: 45 Match paths exactly (i.e. don't allow "/foo/repo" when the real path is 46 "/foo/repo.git" or "/foo/repo/.git") and don't do user-relative paths. 47 git-daemon will refuse to start when this option is enabled and no 48 whitelist is specified. 49 50--base-path:: 51 Remap all the path requests as relative to the given path. 52 This is sort of "GIT root" - if you run git-daemon with 53 '--base-path=/srv/git' on example.com, then if you later try to pull 54 'git://example.com/hello.git', `git-daemon` will interpret the path 55 as '/srv/git/hello.git'. 56 57--base-path-relaxed:: 58 If --base-path is enabled and repo lookup fails, with this option 59 `git-daemon` will attempt to lookup without prefixing the base path. 60 This is useful for switching to --base-path usage, while still 61 allowing the old paths. 62 63--interpolated-path=pathtemplate:: 64 To support virtual hosting, an interpolated path template can be 65 used to dynamically construct alternate paths. The template 66 supports %H for the target hostname as supplied by the client but 67 converted to all lowercase, %CH for the canonical hostname, 68 %IP for the server's IP address, %P for the port number, 69 and %D for the absolute path of the named repository. 70 After interpolation, the path is validated against the directory 71 whitelist. 72 73--export-all:: 74 Allow pulling from all directories that look like GIT repositories 75 (have the 'objects' and 'refs' subdirectories), even if they 76 do not have the 'git-daemon-export-ok' file. 77 78--inetd:: 79 Have the server run as an inetd service. Implies --syslog. 80 Incompatible with --port, --listen, --user and --group options. 81 82--listen=host_or_ipaddr:: 83 Listen on an a specific IP address or hostname. IP addresses can 84 be either an IPv4 address or an IPV6 address if supported. If IPv6 85 is not supported, then --listen=hostname is also not supported and 86 --listen must be given an IPv4 address. 87 Incompatible with '--inetd' option. 88 89--port=n:: 90 Listen on an alternative port. Incompatible with '--inetd' option. 91 92--init-timeout:: 93 Timeout between the moment the connection is established and the 94 client request is received (typically a rather low value, since 95 that should be basically immediate). 96 97--timeout:: 98 Timeout for specific client sub-requests. This includes the time 99 it takes for the server to process the sub-request and time spent 100 waiting for next client's request. 101 102--syslog:: 103 Log to syslog instead of stderr. Note that this option does not imply 104 --verbose, thus by default only error conditions will be logged. 105 106--user-path, --user-path=path:: 107 Allow ~user notation to be used in requests. When 108 specified with no parameter, requests to 109 git://host/~alice/foo is taken as a request to access 110 'foo' repository in the home directory of user `alice`. 111 If `--user-path=path` is specified, the same request is 112 taken as a request to access `path/foo` repository in 113 the home directory of user `alice`. 114 115--verbose:: 116 Log details about the incoming connections and requested files. 117 118--reuseaddr:: 119 Use SO_REUSEADDR when binding the listening socket. 120 This allows the server to restart without waiting for 121 old connections to time out. 122 123--detach:: 124 Detach from the shell. Implies --syslog. 125 126--pid-file=file:: 127 Save the process id in 'file'. Ignored when the daemon 128 is run under `--inetd`. 129 130--user=user, --group=group:: 131 Change daemon's uid and gid before entering the service loop. 132 When only `--user` is given without `--group`, the 133 primary group ID for the user is used. The values of 134 the option are given to `getpwnam(3)` and `getgrnam(3)` 135 and numeric IDs are not supported. 136+ 137Giving these options is an error when used with `--inetd`; use 138the facility of inet daemon to achieve the same before spawning 139`git-daemon` if needed. 140 141--enable=service, --disable=service:: 142 Enable/disable the service site-wide per default. Note 143 that a service disabled site-wide can still be enabled 144 per repository if it is marked overridable and the 145 repository enables the service with an configuration 146 item. 147 148--allow-override=service, --forbid-override=service:: 149 Allow/forbid overriding the site-wide default with per 150 repository configuration. By default, all the services 151 are overridable. 152 153<directory>:: 154 A directory to add to the whitelist of allowed directories. Unless 155 --strict-paths is specified this will also include subdirectories 156 of each named directory. 157 158SERVICES 159-------- 160 161These services can be globally enabled/disabled using the 162command line options of this command. If a finer-grained 163control is desired (e.g. to allow `git-archive` to be run 164against only in a few selected repositories the daemon serves), 165the per-repository configuration file can be used to enable or 166disable them. 167 168upload-pack:: 169 This serves `git-fetch-pack` and `git-peek-remote` 170 clients. It is enabled by default, but a repository can 171 disable it by setting `daemon.uploadpack` configuration 172 item to `false`. 173 174upload-archive:: 175 This serves `git-archive --remote`. It is disabled by 176 default, but a repository can enable it by setting 177 `daemon.uploadarchive` configuration item to `true`. 178 179receive-pack:: 180 This serves `git-send-pack` clients, allowing anonymous 181 push. It is disabled by default, as there is _no_ 182 authentication in the protocol (in other words, anybody 183 can push anything into the repository, including removal 184 of refs). This is solely meant for a closed LAN setting 185 where everybody is friendly. This service can be 186 enabled by `daemon.receivepack` configuration item to 187 `true`. 188 189EXAMPLES 190-------- 191We assume the following in /etc/services:: 192+ 193------------ 194$ grep 9418 /etc/services 195git 9418/tcp # Git Version Control System 196------------ 197 198git-daemon as inetd server:: 199 To set up `git-daemon` as an inetd service that handles any 200 repository under the whitelisted set of directories, /pub/foo 201 and /pub/bar, place an entry like the following into 202 /etc/inetd all on one line: 203+ 204------------------------------------------------ 205 git stream tcp nowait nobody /usr/bin/git-daemon 206 git-daemon --inetd --verbose --export-all 207 /pub/foo /pub/bar 208------------------------------------------------ 209 210 211git-daemon as inetd server for virtual hosts:: 212 To set up `git-daemon` as an inetd service that handles 213 repositories for different virtual hosts, `www.example.com` 214 and `www.example.org`, place an entry like the following into 215 `/etc/inetd` all on one line: 216+ 217------------------------------------------------ 218 git stream tcp nowait nobody /usr/bin/git-daemon 219 git-daemon --inetd --verbose --export-all 220 --interpolated-path=/pub/%H%D 221 /pub/www.example.org/software 222 /pub/www.example.com/software 223 /software 224------------------------------------------------ 225+ 226In this example, the root-level directory `/pub` will contain 227a subdirectory for each virtual host name supported. 228Further, both hosts advertise repositories simply as 229`git://www.example.com/software/repo.git`. For pre-1.4.0 230clients, a symlink from `/software` into the appropriate 231default repository could be made as well. 232 233 234git-daemon as regular daemon for virtual hosts:: 235 To set up `git-daemon` as a regular, non-inetd service that 236 handles repositories for multiple virtual hosts based on 237 their IP addresses, start the daemon like this: 238+ 239------------------------------------------------ 240 git-daemon --verbose --export-all 241 --interpolated-path=/pub/%IP/%D 242 /pub/192.168.1.200/software 243 /pub/10.10.220.23/software 244------------------------------------------------ 245+ 246In this example, the root-level directory `/pub` will contain 247a subdirectory for each virtual host IP address supported. 248Repositories can still be accessed by hostname though, assuming 249they correspond to these IP addresses. 250 251selectively enable/disable services per repository:: 252 To enable `git-archive --remote` and disable `git-fetch` against 253 a repository, have the following in the configuration file in the 254 repository (that is the file 'config' next to 'HEAD', 'refs' and 255 'objects'). 256+ 257---------------------------------------------------------------- 258 [daemon] 259 uploadpack = false 260 uploadarchive = true 261---------------------------------------------------------------- 262 263 264Author 265------ 266Written by Linus Torvalds <torvalds@osdl.org>, YOSHIFUJI Hideaki 267<yoshfuji@linux-ipv6.org> and the git-list <git@vger.kernel.org> 268 269Documentation 270-------------- 271Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. 272 273GIT 274--- 275Part of the gitlink:git[7] suite