git-push(1)
===========

NAME
----
git-push - Update remote refs along with associated objects


SYNOPSIS
--------
[verse]
'git push' [--all | --mirror] [--dry-run] [--tags] [--receive-pack=<git-receive-pack>]
           [--repo=<repository>] [-f | --force] [-v | --verbose]
           [<repository> <refspec>...]

DESCRIPTION
-----------

Updates remote refs using local refs, while sending objects
necessary to complete the given refs.

You can make interesting things happen to a repository
every time you push into it, by setting up 'hooks' there.  See
documentation for linkgit:git-receive-pack[1].


OPTIONS
-------
<repository>::
        The "remote" repository that is destination of a push
        operation.  This parameter can be either a URL
        (see the section <<URLS,GIT URLS>> below) or the name
        of a remote (see the section <<REMOTES,REMOTES>> below).

<refspec>...::
        The canonical format of a <refspec> parameter is
        `+?<src>:<dst>`; that is, an optional plus `{plus}`, followed
        by the source ref, followed by a colon `:`, followed by
        the destination ref.
+
The <src> side represents the source branch (or arbitrary
"SHA1 expression", such as `master~4` (four parents before the
tip of `master` branch); see linkgit:git-rev-parse[1]) that you
want to push.  The <dst> side represents the destination location.
+
The local ref that matches <src> is used
to fast forward the remote ref that matches <dst>.  If
the optional leading plus `+` is used, the remote ref is updated
even if it does not result in a fast forward update.
+
`tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`.
+
A lonely <src> parameter (without a colon and a destination) pushes
the <src> to the same name in the destination repository.
+
Pushing an empty <src> allows you to delete the <dst> ref from
the remote repository.
+
The special refspec `:` (or `+:` to allow non-fast forward updates)
directs git to push "matching" branches: for every branch that exists on
the local side, the remote side is updated if a branch of the same name
already exists on the remote side.  This is the default operation mode
if no explicit refspec is found (that is neither on the command line
nor in any Push line of the corresponding remotes file---see below).

--all::
        Instead of naming each ref to push, specifies that all
        refs under `$GIT_DIR/refs/heads/` be pushed.

--mirror::
        Instead of naming each ref to push, specifies that all
        refs under `$GIT_DIR/refs/` (which includes but is not
        limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`)
        be mirrored to the remote repository.  Newly created local
        refs will be pushed to the remote end, locally updated refs
        will be force updated on the remote end, and deleted refs
        will be removed from the remote end.  This is the default
        if the configuration option `remote.<remote>.mirror` is
        set.

--dry-run::
        Do everything except actually send the updates.

--tags::
        All refs under `$GIT_DIR/refs/tags` are pushed, in
        addition to refspecs explicitly listed on the command
        line.

--receive-pack=<git-receive-pack>::
--exec=<git-receive-pack>::
        Path to the 'git-receive-pack' program on the remote
        end.  Sometimes useful when pushing to a remote
        repository over ssh, and you do not have the program in
        a directory on the default $PATH.

-f::
--force::
        Usually, the command refuses to update a remote ref that is
        not an ancestor of the local ref used to overwrite it.
        This flag disables the check.  This can cause the
        remote repository to lose commits; use it with care.

--repo=<repository>::
        This option is only relevant if no <repository> argument is
        passed in the invocation. In this case, 'git-push' derives the
        remote name from the current branch: If it tracks a remote
        branch, then that remote repository is pushed to. Otherwise,
        the name "origin" is used. For this latter case, this option
        can be used to override the name "origin". In other words,
        the difference between these two commands
+
--------------------------
git push public         #1
git push --repo=public  #2
--------------------------
+
is that #1 always pushes to "public" whereas #2 pushes to "public"
only if the current branch does not track a remote branch. This is
useful if you write an alias or script around 'git-push'.

--thin::
--no-thin::
        These options are passed to 'git-send-pack'.  Thin
        transfer spends extra cycles to minimize the number of
        objects to be sent and meant to be used on slower connection.

-v::
--verbose::
        Run verbosely.

include::urls-remotes.txt[]

OUTPUT
------

The output of "git push" depends on the transport method used; this
section describes the output when pushing over the git protocol (either
locally or via ssh).

The status of the push is output in tabular form, with each line
representing the status of a single ref. Each line is of the form:

-------------------------------
 <flag> <summary> <from> -> <to> (<reason>)
-------------------------------

flag::
        A single character indicating the status of the ref. This is
        blank for a successfully pushed ref, `!` for a ref that was
        rejected or failed to push, and '=' for a ref that was up to
        date and did not need pushing (note that the status of up to
        date refs is shown only when `git push` is running verbosely).

summary::
        For a successfully pushed ref, the summary shows the old and new
        values of the ref in a form suitable for using as an argument to
        `git log` (this is `<old>..<new>` in most cases, and
        `<old>...<new>` for forced non-fast forward updates). For a
        failed update, more details are given for the failure.
        The string `rejected` indicates that git did not try to send the
        ref at all (typically because it is not a fast forward). The
        string `remote rejected` indicates that the remote end refused
        the update; this rejection is typically caused by a hook on the
        remote side. The string `remote failure` indicates that the
        remote end did not report the successful update of the ref
        (perhaps because of a temporary error on the remote side, a
        break in the network connection, or other transient error).

from::
        The name of the local ref being pushed, minus its
        `refs/<type>/` prefix. In the case of deletion, the
        name of the local ref is omitted.

to::
        The name of the remote ref being updated, minus its
        `refs/<type>/` prefix.

reason::
        A human-readable explanation. In the case of successfully pushed
        refs, no explanation is needed. For a failed ref, the reason for
        failure is described.

Examples
--------

git push origin master::
        Find a ref that matches `master` in the source repository
        (most likely, it would find `refs/heads/master`), and update
        the same ref (e.g. `refs/heads/master`) in `origin` repository
        with it.  If `master` did not exist remotely, it would be
        created.

git push origin :experimental::
        Find a ref that matches `experimental` in the `origin` repository
        (e.g. `refs/heads/experimental`), and delete it.

git push origin master:satellite/master dev:satellite/dev::
        Use the source ref that matches `master` (e.g. `refs/heads/master`)
        to update the ref that matches `satellite/master` (most probably
        `refs/remotes/satellite/master`) in the `origin` repository, then
        do the same for `dev` and `satellite/dev`.

git push origin master:refs/heads/experimental::
        Create the branch `experimental` in the `origin` repository
        by copying the current `master` branch.  This form is only
        needed to create a new branch or tag in the remote repository when
        the local name and the remote name are different; otherwise,
        the ref name on its own will work.

Author
------
Written by Junio C Hamano <gitster@pobox.com>, later rewritten in C
by Linus Torvalds <torvalds@osdl.org>

Documentation
--------------
Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>.

GIT
---
Part of the linkgit:git[1] suite