1// Please don't remove this comment as asciidoc behaves badly when 2// the first non-empty line is ifdef/ifndef. The symptom is that 3// without this comment the <git-diff-core> attribute conditionally 4// defined below ends up being defined unconditionally. 5// Last checked with asciidoc 7.0.2. 6 7ifndef::git-format-patch[] 8ifndef::git-diff[] 9ifndef::git-log[] 10:git-diff-core: 1 11endif::git-log[] 12endif::git-diff[] 13endif::git-format-patch[] 14 15ifdef::git-format-patch[] 16-p:: 17--no-stat:: 18 Generate plain patches without any diffstats. 19endif::git-format-patch[] 20 21ifndef::git-format-patch[] 22-p:: 23-u:: 24--patch:: 25 Generate patch (see section on generating patches). 26 {git-diff? This is the default.} 27endif::git-format-patch[] 28 29-U<n>:: 30--unified=<n>:: 31 Generate diffs with <n> lines of context instead of 32 the usual three. 33ifndef::git-format-patch[] 34 Implies `-p`. 35endif::git-format-patch[] 36 37ifndef::git-format-patch[] 38--raw:: 39 Generate the raw format. 40 {git-diff-core? This is the default.} 41endif::git-format-patch[] 42 43ifndef::git-format-patch[] 44--patch-with-raw:: 45 Synonym for `-p --raw`. 46endif::git-format-patch[] 47 48--patience:: 49 Generate a diff using the "patience diff" algorithm. 50 51--stat[=width[,name-width]]:: 52 Generate a diffstat. You can override the default 53 output width for 80-column terminal by `--stat=width`. 54 The width of the filename part can be controlled by 55 giving another width to it separated by a comma. 56 57--numstat:: 58 Similar to `\--stat`, but shows number of added and 59 deleted lines in decimal notation and pathname without 60 abbreviation, to make it more machine friendly. For 61 binary files, outputs two `-` instead of saying 62 `0 0`. 63 64--shortstat:: 65 Output only the last line of the `--stat` format containing total 66 number of modified files, as well as number of added and deleted 67 lines. 68 69--dirstat[=limit]:: 70 Output the distribution of relative amount of changes (number of lines added or 71 removed) for each sub-directory. Directories with changes below 72 a cut-off percent (3% by default) are not shown. The cut-off percent 73 can be set with `--dirstat=limit`. Changes in a child directory is not 74 counted for the parent directory, unless `--cumulative` is used. 75 76--dirstat-by-file[=limit]:: 77 Same as `--dirstat`, but counts changed files instead of lines. 78 79--summary:: 80 Output a condensed summary of extended header information 81 such as creations, renames and mode changes. 82 83ifndef::git-format-patch[] 84--patch-with-stat:: 85 Synonym for `-p --stat`. 86endif::git-format-patch[] 87 88ifndef::git-format-patch[] 89 90-z:: 91ifdef::git-log[] 92 Separate the commits with NULs instead of with new newlines. 93+ 94Also, when `--raw` or `--numstat` has been given, do not munge 95pathnames and use NULs as output field terminators. 96endif::git-log[] 97ifndef::git-log[] 98 When `--raw`, `--numstat`, `--name-only` or `--name-status` has been 99 given, do not munge pathnames and use NULs as output field terminators. 100endif::git-log[] 101+ 102Without this option, each pathname output will have TAB, LF, double quotes, 103and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, 104respectively, and the pathname will be enclosed in double quotes if 105any of those replacements occurred. 106 107--name-only:: 108 Show only names of changed files. 109 110--name-status:: 111 Show only names and status of changed files. See the description 112 of the `--diff-filter` option on what the status letters mean. 113 114--submodule[=<format>]:: 115 Chose the output format for submodule differences. <format> can be one of 116 'short' and 'log'. 'short' just shows pairs of commit names, this format 117 is used when this option is not given. 'log' is the default value for this 118 option and lists the commits in that commit range like the 'summary' 119 option of linkgit:git-submodule[1] does. 120 121--color[=<when>]:: 122 Show colored diff. 123 The value must be always (the default), never, or auto. 124 125--no-color:: 126 Turn off colored diff, even when the configuration file 127 gives the default to color output. 128 Same as `--color=never`. 129 130--word-diff[=<mode>]:: 131 Show a word diff, using the <mode> to delimit changed words. 132 By default, words are delimited by whitespace; see 133 `--word-diff-regex` below. The <mode> defaults to 'plain', and 134 must be one of: 135+ 136-- 137color:: 138 Highlight changed words using only colors. Implies `--color`. 139plain:: 140 Show words as `[-removed-]` and `{+added+}`. Makes no 141 attempts to escape the delimiters if they appear in the input, 142 so the output may be ambiguous. 143porcelain:: 144 Use a special line-based format intended for script 145 consumption. Added/removed/unchanged runs are printed in the 146 usual unified diff format, starting with a `+`/`-`/` ` 147 character at the beginning of the line and extending to the 148 end of the line. Newlines in the input are represented by a 149 tilde `~` on a line of its own. 150none:: 151 Disable word diff again. 152-- 153+ 154Note that despite the name of the first mode, color is used to 155highlight the changed parts in all modes if enabled. 156 157--word-diff-regex=<regex>:: 158 Use <regex> to decide what a word is, instead of considering 159 runs of non-whitespace to be a word. Also implies 160 `--word-diff` unless it was already enabled. 161+ 162Every non-overlapping match of the 163<regex> is considered a word. Anything between these matches is 164considered whitespace and ignored(!) for the purposes of finding 165differences. You may want to append `|[^[:space:]]` to your regular 166expression to make sure that it matches all non-whitespace characters. 167A match that contains a newline is silently truncated(!) at the 168newline. 169+ 170The regex can also be set via a diff driver or configuration option, see 171linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly 172overrides any diff driver or configuration setting. Diff drivers 173override configuration settings. 174 175--color-words[=<regex>]:: 176 Equivalent to `--word-diff=color` plus (if a regex was 177 specified) `--word-diff-regex=<regex>`. 178endif::git-format-patch[] 179 180--no-renames:: 181 Turn off rename detection, even when the configuration 182 file gives the default to do so. 183 184ifndef::git-format-patch[] 185--check:: 186 Warn if changes introduce trailing whitespace 187 or an indent that uses a space before a tab. Exits with 188 non-zero status if problems are found. Not compatible with 189 --exit-code. 190endif::git-format-patch[] 191 192--full-index:: 193 Instead of the first handful of characters, show the full 194 pre- and post-image blob object names on the "index" 195 line when generating patch format output. 196 197--binary:: 198 In addition to `--full-index`, output a binary diff that 199 can be applied with `git-apply`. 200 201--abbrev[=<n>]:: 202 Instead of showing the full 40-byte hexadecimal object 203 name in diff-raw format output and diff-tree header 204 lines, show only a partial prefix. This is 205 independent of the `--full-index` option above, which controls 206 the diff-patch output format. Non default number of 207 digits can be specified with `--abbrev=<n>`. 208 209-B[<n>][/<m>]:: 210 Break complete rewrite changes into pairs of delete and 211 create. This serves two purposes: 212+ 213It affects the way a change that amounts to a total rewrite of a file 214not as a series of deletion and insertion mixed together with a very 215few lines that happen to match textually as the context, but as a 216single deletion of everything old followed by a single insertion of 217everything new, and the number `m` controls this aspect of the -B 218option (defaults to 60%). `-B/70%` specifies that less than 30% of the 219original should remain in the result for git to consider it a total 220rewrite (i.e. otherwise the resulting patch will be a series of 221deletion and insertion mixed together with context lines). 222+ 223When used with -M, a totally-rewritten file is also considered as the 224source of a rename (usually -M only considers a file that disappeared 225as the source of a rename), and the number `n` controls this aspect of 226the -B option (defaults to 50%). `-B20%` specifies that a change with 227addition and deletion compared to 20% or more of the file's size are 228eligible for being picked up as a possible source of a rename to 229another file. 230 231-M[<n>]:: 232ifndef::git-log[] 233 Detect renames. 234endif::git-log[] 235ifdef::git-log[] 236 If generating diffs, detect and report renames for each commit. 237 For following files across renames while traversing history, see 238 `--follow`. 239endif::git-log[] 240 If `n` is specified, it is a is a threshold on the similarity 241 index (i.e. amount of addition/deletions compared to the 242 file's size). For example, `-M90%` means git should consider a 243 delete/add pair to be a rename if more than 90% of the file 244 hasn't changed. 245 246-C[<n>]:: 247 Detect copies as well as renames. See also `--find-copies-harder`. 248 If `n` is specified, it has the same meaning as for `-M<n>`. 249 250ifndef::git-format-patch[] 251--diff-filter=[ACDMRTUXB*]:: 252 Select only files that are Added (`A`), Copied (`C`), 253 Deleted (`D`), Modified (`M`), Renamed (`R`), have their 254 type (i.e. regular file, symlink, submodule, ...) changed (`T`), 255 are Unmerged (`U`), are 256 Unknown (`X`), or have had their pairing Broken (`B`). 257 Any combination of the filter characters may be used. 258 When `*` (All-or-none) is added to the combination, all 259 paths are selected if there is any file that matches 260 other criteria in the comparison; if there is no file 261 that matches other criteria, nothing is selected. 262endif::git-format-patch[] 263 264--find-copies-harder:: 265 For performance reasons, by default, `-C` option finds copies only 266 if the original file of the copy was modified in the same 267 changeset. This flag makes the command 268 inspect unmodified files as candidates for the source of 269 copy. This is a very expensive operation for large 270 projects, so use it with caution. Giving more than one 271 `-C` option has the same effect. 272 273-l<num>:: 274 The `-M` and `-C` options require O(n^2) processing time where n 275 is the number of potential rename/copy targets. This 276 option prevents rename/copy detection from running if 277 the number of rename/copy targets exceeds the specified 278 number. 279 280ifndef::git-format-patch[] 281-S<string>:: 282 Look for differences that introduce or remove an instance of 283 <string>. Note that this is different than the string simply 284 appearing in diff output; see the 'pickaxe' entry in 285 linkgit:gitdiffcore[7] for more details. 286 287--pickaxe-all:: 288 When `-S` finds a change, show all the changes in that 289 changeset, not just the files that contain the change 290 in <string>. 291 292--pickaxe-regex:: 293 Make the <string> not a plain string but an extended POSIX 294 regex to match. 295endif::git-format-patch[] 296 297-O<orderfile>:: 298 Output the patch in the order specified in the 299 <orderfile>, which has one shell glob pattern per line. 300 301ifndef::git-format-patch[] 302-R:: 303 Swap two inputs; that is, show differences from index or 304 on-disk file to tree contents. 305 306--relative[=<path>]:: 307 When run from a subdirectory of the project, it can be 308 told to exclude changes outside the directory and show 309 pathnames relative to it with this option. When you are 310 not in a subdirectory (e.g. in a bare repository), you 311 can name which subdirectory to make the output relative 312 to by giving a <path> as an argument. 313endif::git-format-patch[] 314 315-a:: 316--text:: 317 Treat all files as text. 318 319--ignore-space-at-eol:: 320 Ignore changes in whitespace at EOL. 321 322-b:: 323--ignore-space-change:: 324 Ignore changes in amount of whitespace. This ignores whitespace 325 at line end, and considers all other sequences of one or 326 more whitespace characters to be equivalent. 327 328-w:: 329--ignore-all-space:: 330 Ignore whitespace when comparing lines. This ignores 331 differences even if one line has whitespace where the other 332 line has none. 333 334--inter-hunk-context=<lines>:: 335 Show the context between diff hunks, up to the specified number 336 of lines, thereby fusing hunks that are close to each other. 337 338ifndef::git-format-patch[] 339--exit-code:: 340 Make the program exit with codes similar to diff(1). 341 That is, it exits with 1 if there were differences and 342 0 means no differences. 343 344--quiet:: 345 Disable all output of the program. Implies `--exit-code`. 346endif::git-format-patch[] 347 348--ext-diff:: 349 Allow an external diff helper to be executed. If you set an 350 external diff driver with linkgit:gitattributes[5], you need 351 to use this option with linkgit:git-log[1] and friends. 352 353--no-ext-diff:: 354 Disallow external diff drivers. 355 356--ignore-submodules[=<when>]:: 357 Ignore changes to submodules in the diff generation. <when> can be 358 either "untracked", "dirty" or "all", which is the default. When 359 "untracked" is used submodules are not considered dirty when they only 360 contain untracked content (but they are still scanned for modified 361 content). Using "dirty" ignores all changes to the work tree of submodules, 362 only changes to the commits stored in the superproject are shown (this was 363 the behavior until 1.7.0). Using "all" hides all changes to submodules. 364 365--src-prefix=<prefix>:: 366 Show the given source prefix instead of "a/". 367 368--dst-prefix=<prefix>:: 369 Show the given destination prefix instead of "b/". 370 371--no-prefix:: 372 Do not show any source or destination prefix. 373 374For more detailed explanation on these common options, see also 375linkgit:gitdiffcore[7].